pH Meters, Jenco

pH6810NK VisionPlus pH/mV/Temp. Meter Kit by Jenco

Jenco VisionPlus pH6810 is an easy to use, IP67 rated pH meter with mV and temperature readout. Key features include an IP67 rated body, 2 or 3 point calibration, electrode efficiency and manual/automatic temperature compensation.

VisionPlus pH6810 is RoHS compliant.

Includes:

• PH6810N: Meter
• 6810NP: PH/Temp/Ref. Electrode
• pH6810F: Soft pouch with pH4, pH7 capsules & bottles

• Large LCD with dual display of pH and temperature or ORP and temperature
• IP67 rated water-proof and dust-proof case (optional 3-in-1 pH/ref/temperature electrode is fitted with special connectors that maintains IP67 rating)
• 2 or 3 point calibration
• Manual or automatic temperature compensation
• US or NIST buffer sets
• Electrode efficiency in percentage
• End-point sensing and auto-lock
• Dedicated operation buttons with audio feedback
• Protective, shock-proof rubber boot

671PKA Benchtop pH/mV/Temp Meter Kit by Jenco

pH/mV/Temp. benchtop meter with LCD digital display, voltage recorder output, Karl Fisher output and Pt-100 ATC or manual temperature compensation. Calibration is via knobs and potentiometer. Connectors are BNC or U.S. standard connector with reference pin and banana plugs for ATC and recorder. AC/DC Powered.

Includes:

• 671P Benchtop pH/mV/Temp Meter
• 600P pH Probe
• 600D115 AC Adapter

• All solid state design
• Low drift and high stability
• Fast input response
• Battery low indicator
• Standby batteries for field application
• Karl fischer current output
• Analog recorder output
• 50hz, 60 hz rejection
• Manual and automatic temperature compensation
• 0 to 100°C temperature measurement
• Auto-polarity mv measurement
• UL approved ac line adaptor

692 1/8 DIN Panel Mount pH Transmitter with 4-20 mA Output by Jenco

1/8 DIN panel mount pH transmitter with 4-20 mA output and calibration by potentiometers. ATC temperature control uses a Pt-100 or simulation resistor. Features a large LCD display and uses a BNC input and spade lug screw type connector block.

• All solid state design
• ATC
• Low power consumption design, reduced internal heating thus increased reliability
• 0.56 high LCD display
• Isolated 4 to 20 mA current output
• High stability and fast response
• 1/8 DIN standard aluminum case
• Easy to install
• Heat cycled 100 hours before shipment

3676 1/4 DIN Panel Mount pH/ORP Controller/Transmitter by Jenco

1/4 DIN panel mount pH/ORP controller/transmitter with dual SPDT Hi/Lo relays, manual set points and calibration are via potentiometers. Features a 4-20 mA current output and has an external pH/ORP select switch. Display is a large bright red LED display. Connectors are a BNC input and spade lug screw type connector blocks. Meter requires a Pt-100 ATC or temp. simulation resistor. Power 115/230V AC.

• Isolated 4 to 20 mA output
• Dual on/off relays
• Large led display
• ATC
• 115VAC /230VAC operations
• Compact 1/4 DIN case
• Low power solid state design
• Front panel output current span adjustable control
• Front panel acid/base influent select switch
• Front panel high/low relay format select switch

pH6810N VisionPlus pH/mV/Temp. Meter by Jenco

Jenco VisionPlus pH6810 is an easy to use, IP67 rated pH meter with mV and temperature readout. Key features include an IP67 rated body, 2 or 3 point calibration, electrode efficiency and manual/automatic temperature compensation.

VisionPlus pH6810 is RoHS compliant.

• Large LCD with dual display of pH and temperature or ORP and temperature
• IP67 rated water-proof and dust-proof case (optional 3-in-1 pH/ref/temperature electrode is fitted with special connectors that maintains IP67 rating)
• 2 or 3 point calibration
• Manual or automatic temperature compensation
• US or NIST buffer sets
• Electrode efficiency in percentage
• End-point sensing and auto-lock
• Dedicated operation buttons with audio feedback
• Protective, shock-proof rubber boot

6307 Benchtop pH/Conductivity Meter with RS-232 by Jenco

pH/Conductivity/Salinity/Temperature benchtop meter with dual LCD displays for conductivity and r pH/mV/temp. Features cell adjust and 4.01/7.00/10.01 buffer select.

• Dual LCDs display pH, conductivity, or salinity, simultaneously with temperature.
• Accepts 2-wire and 4-wire conductivity cells with k=1 or k=5 cell constants for improved flexibility and accuracy.
• Auto or manual ranging of 4 conductivity ranges are available for improved usability.
• Convenient calibration with automatic buffer recognition of us or european pH buffer sets. quick one point conductivity calibration. calibration data is stored in memory and is ready for use on power up.
• Readings are automatically compensated for temperature (ATC). meter automatically switches into manual compensation when temperature probe is not present.
• Automatic lock mode and end point sensing are available to lock in stable readings.
• Intuitive operation with membrane keypad with tactile and audio feedback.
• Indication for electrode slope and electrode offset for optimized electrode maintenance.
• Splash resistant case is made with durable, reinforced plastic for added protection.
• RS-232 computer interface with software.
• BNC connector for pH/reference pH and mv.
• 8pin DIN connector for conductivity cell & 10k thermistor.
• Separate pin plug connector for reference pH.
• AC adaptor or battery power.

6173RKBA Large LCD Benchtop pH/mV/Temp Meter Kit by Jenco

pH/mV/Temp benchtop meter with a very large LCD display for ease of use. Features a splash proof and rugged case ideal for schools and universities. Features EEF, Electrode Efficiency Function, multiple buffers 4.00, 4.01, 6.86, 7.00, 9.18 & 10.0 and automatic slope, buffer and electrode offset recognition. Has power down memory backup and works on 6 AA batteries or 115/230 V AC adapters. CE Approved & ISO 9001 Certified. RS-232C output.

Includes:

• 6173R Benchtop pH/mV/Temp Meter
• 6000P pH/Ref./Temp. Probe
• 6005C Cable
• 6230D115 AC Adapter
• Electrode Holder Arm

• Larger LCD display
• Buffers recognition
• Electrode offset recognition
• Electrode slope recognition
• Built in buffer temp. coefficient
• Auto lock
• Touch keys with audio feedback
• Power down memory
• Battery/ac adaptor
• Low power consumption
• Battery low indicator
• Percentage of power supply display
• RS-232c output

6010MKC Handheld pH/ORP Meter Kit by Jenco

Includes:

• 6010M Handheld pH/ORP Meter
• 6000A Glass, 10K Thermistor with Jenco Screw Connector
• 600P pH electrode, 3-ft cable, BNC connector, max temperature 60° C
• 6010F carrying case

• Simultaneous displays pH or mV and temperature.
• 50 data set reviewable memory (6010M only).
• Convenient calibration with automatic buffer recognition of US and European buffer sets. Calibration data is stored in memory and ready for use on power up.
• Automatic or manual temperature compensation.
• Automatic lock mode and end point sensing are available to lock in stable readings.
• Automatic shutoff function (30 minutes of non-use).
• Battery life over 1000 hours.
• IP65 waterproof
• Low battery indicator.
• RoHS and CE compliant.

6010NKB Handheld pH/ORP Meter Kit by Jenco

Includes:

• 6010N Handheld pH/ORP Meter
• 600P pH electrode, 3-ft cable, BNC connector, max temperature 60° C
• 6003C Extension Cable, 4-Pin to BNC & 1-Pin ATC, 3-ft
• 6010F carrying case

• Simultaneous displays pH or mV and temperature.
• 50 data set reviewable memory (6010M only).
• Convenient calibration with automatic buffer recognition of US and European buffer sets. Calibration data is stored in memory and ready for use on power up.
• Automatic or manual temperature compensation.
• Automatic lock mode and end point sensing are available to lock in stable readings.
• Automatic shutoff function (30 minutes of non-use).
• Battery life over 1000 hours.
• IP65 waterproof
• Low battery indicator.
• RoHS and CE compliant.

pH6175KA Benchtop pH, mV, ORP, Ion Temperature Meter Kit by Jenco

Jenco 6175 benchtop pH meter is the successor of the popular 6173 benchtop pH meter. While the large LCD display and easy of use remains firmly in place, model 6175 now offers 0.1 mV resolution for ISE applications and a streamlined look.

This pH benchtop is RoHS compliant.

Includes:

• pH6175: Meter
• 600P: pH/Ref Electrode, 3-ft, BNC
• Choice of 6230A: Glass Temperature Probe. 3-ft Or 6230AST: Stainless Steel Temperature Probe, 3-ft
• Choice of 6230D115: 120V AC adapter Or 6230D230: 220V AC adapter

• Large LCD display
• High 0.1 mV resolution
• Automatic buffers recognition of US and NIST buffer sets
• Displays electrode efficiency with electrode offset recognition and electrode slope recognition
• Built in buffer temp. coefficient
• Stores calibration data in memory so meter is available for use on power up
• Automatic / manual temperature compensation
• Automatic lock mode and end point sensing lock stable readings
• AC adapter or battery powered (with low battery indicator)
• RoHS compliant

3671N 1/8 DIN Panel Mount pH/ORP Controller by Jenco

1/8 DIN panel mount pH/ORP controller with dual SPDT Hi/Lo relays, manual set points and calibration are via potentiometers. Features a voltage/recorder output and an internal pH/ORP select switch. Display is a large bright red LED. Connectors are a BNC input and spade lug screw type connector block. Meter requires a Pt-100 ATC or a simulation resistor for temperature. Power115/230A AC.

• All solid state design
• Low cost
• Easy to install
• Set points on front panel
• Recorder output
• 0.56 high efficiency red led display
• 1/8 DIN aluminum case
• Set points cover entire span
• ATC for pH 0 to 100 °C
• Internal pH/ORP select switch
• Low power consumption design, reduced internal heating thus increased reliability

6010MKA Handheld pH/ORP Meter Kit by Jenco

Includes:

• 6010M Handheld pH/ORP Meter
• 6000P 3-in-1 pH/ ATC Probe, 4-pin connector, Temp. 60º C
• 6003C Extension Cable, 4-Pin to BNC & 1-Pin ATC, 3-ft

• Simultaneous displays pH or mV and temperature.
• 50 data set reviewable memory (6010M only).
• Convenient calibration with automatic buffer recognition of US and European buffer sets. Calibration data is stored in memory and ready for use on power up.
• Automatic or manual temperature compensation.
• Automatic lock mode and end point sensing are available to lock in stable readings.
• Automatic shutoff function (30 minutes of non-use).
• Battery life over 1000 hours.
• IP65 waterproof
• Low battery indicator.
• RoHS and CE compliant.

5001 pH Handheld Meter by Jenco

pH handheld meter with build in tabletop stand and LCD digital display. Manual temperature compensation and pH standardization calibration is via knobs and pH slope calibration is via potentiometer. Input connector is BNC type. AC/DC Powered.

• All solid state design
• Low drift and high stability
• Tilt stand
• Rugged carrying case
• Low cost
• Manual temperature compensation for pH measurement
• Battery low indicator
• UL approved ac line adaptor
• 9v battery

6251 pH/mV/ION/Temp. Microprocessor Handheld Meter by Jenco

pH/mV/ION/Temp. microprocessor handheld meter in splash proof case, BNC pH/mV/ION connector and 8-pin DIN ATC connector. AC/DC power. CE Approved.

• CE approved
• Power down backup
• Splash resistant/watertight case
• Battery/ac adaptor
• High 50/60hz noise rejection
• High resolution ,4 1/2 digit readout
• Highly reliable mechanical touch keys with audio feedback
• Programmable resolution to 0.001/0.1 pH,1/0.1 mv
• Direct readout in ion concentration (calibration units conform to that of the calibration standard solutions)

6350NKB pH/Conductivity/Salinity/mV/Temp. Handheld Meter with RS-232 Kit by Jenco

The Jenco 6350 is a high performance pH/Conductivity/Salinity/mV/Temp. handheld meter in a splash proof case with an RS-232C interface that allows it to communicate with any IBM compatible PC. This meter is CE approved and features 0.01 pH Resolution and a mV range of ± Salinity is in the range of 0.0 to 80.0 ppt with a 0.0 ppt resolution. Conductivity Cells are selectable for K=1.0 or K=5.0 and ranges are selectable for uS or mS.

Includes:

• 6350N: Conductivity meter
• 600P: pH/Ref. electrode
• Choice of 6230D115: 120V AC adapter or 6230D230: 220V AC adapter
• 6230F: Carrying Case with pH4, pH7 buffer capsule

• pH buffer recognition: model 6350 (pH:7.00,4.01,10.01) , model 6350c (pH:6.86,4,9.18)
• Selectable 2/4 wire cells for long cable length & wide measurement range
• Store 50 sets of data in non-volatile memory
• Conductivity auto/manual range
• Power down memory backup
• Splash resistant/watertight case
• Audio feedback keys
• Battery/ac adaptor
• RS-232c output

611K pH Analog Meter Kit by Jenco

pH Analog handheld meter with pH 2.0 to 12.00 mirrored analog scale usable over 0-14 pH range with manual temperature compensation. pH calibration is via knobs and pH slope calibration potentiometer, connector is BNC. AC/DC Powered.

Includes:

• 611 pH Analog Handheld Meter
• 600P pH electrode
• 611F carrying case

• Complete with combination electrode and buffer solution
• UL approved ac line adaptor
• One conventional 9v battery
• Manual temp. compensation
• Slope adjust
• High stability
• Large easy to read analog display
• Low power consumption
• High input impedance
• Battery low indication
• Rugged carrying case
• All solid state design
• Long battery life

6251KB pH/mV/ION/Temp. Microprocessor Handheld Meter Kit by Jenco

pH/mV/ION/Temp. microprocessor handheld meter in splash proof case, BNC pH/mV/ION connector and 8-pin DIN ATC connector. AC/DC power. CE Approved.

Includes:

• 6251 pH/mV/ION/Temp. Microprocessor Handheld Meter
• 6000P pH/Ref./Temp. Probe
• 6005C Extension Cable
• 6230D115 AC Adapter
• 6250F Carrying Case with pH4, pH7 Buffer capsules and bottles

• CE approved
• Power down backup
• Splash resistant/watertight case
• Battery/ac adaptor
• High 50/60hz noise rejection
• High resolution ,4 1/2 digit readout
• Highly reliable mechanical touch keys with audio feedback
• Programmable resolution to 0.001/0.1 pH,1/0.1 mv
• Direct readout in ion concentration (calibration units conform to that of the calibration standard solutions)

pH630C pH/Temperature & Replaceable pH Electrode by Jenco

VisionPlus pH630 is a rugged, easy to use, IP67 rated pH tester with temperature readout. Key features include IP67 rated body, automatic temperature compensation, up to 3 point calibration and replaceable electrode module. Available in degrees Celsius and degrees Fahrenheit models.

This pH tester is RoHS compliant.

• Automatic temperature compensation
• 1, 2 or 3 point calibration
• Stores calibration data
• Replaceable electrode module
• High noise resistance
• Simultaneous display of pH and temperature
• Large temperature range
• Dedicated button for data hold
• Low battery indicator
• IP67 rated body for water-proof and dust-proof
• RoHS compliant

693-pH 2-wire 4-20 mA pH Transmitter by Jenco

2-wire 4-20 mA pH transmitter in a sealed NEMA-4 enclosure powered by 11 to 80 Volts DC. Span is fixed 0-14 pH. Connectors are BNC and tinned leads for 3-K Balco ATC sensor or simulation resistor.

• Input/output isolated
• Nema 4x enclosure
• 4 to 20 mA output
• High accuracy
• BNC input connector
• High input impedance
• Wide range power supply ,12 to 80 VDC