$500 - $750, GfG

1316009 G311 Single Gas Detector for Methane (Natural Gas), Propane, and Other MOS Detectable VOCs, with 4 AA Alkaline Batteries by GfG

Pinpoint the Smallest Leaks

Small leaks in pipes or storage tanks can release enough gas to build up dangerous concentrations. The careful inspection of flanged, threaded and soldered connections before and after installation will ensure equipment and worker safety. The G300 leak detector will make leakage sprays a thing of the past

Clear and simple displays and warnings

Changing gas concentrations are indicated audibly and visually. The frequency of the audible warning rises with gas concentrations, allowing the user to pinpoint leaks. The bar graph display will warn the user if dangerous gas concentrations arise.

Light, compact and durable

Designed for one-handed operation, the G300 reacts to concentrations as small as 5 ppm and measures up to more than 10,000 ppm or 1% volume. The sensor is located at the end of a flexible gooseneck or a helix cable to allow the user to reach difficult or unreachable locations. The G300 is available with or without explosion protection for ammonia and combustible gases. The G311 operates on four "AA" alkaline batteries. All others have a rechargeable battery with run times of more than eight hours.

Features

• Small, light, and durable leak detector
• For combustible gases and ammonia
• More than 8 hours of continuous operation
• Explosion-proof models available

Standard Accessories

• G300 Detector
• Specified sensor
• Alkaline batteries or rechargeable NiMH battery pack as specified
• Charger (with rechargeable battery pack only)
• Fixed gooseneck (with alkaline battery pack only)
• Manual

Oxygen (O2) Sensor, 0-25% vol.

Carbon Dioxide (CO2) Sensor (All Detection Ranges)

1418-122 Micro IV Single Gas Detector with 2-Year Sensor Warranty, Ethylene Oxide (C2H4O), 0 - 20 ppm by GfG

Durable, compact design

The Micro IV is compact, robust and very easy to use. It is designed to be used in the harshest environments. The Micro IV includes a set of rubber boots to withstand hard knocks and drops.

Widest Range of sensors

Micro IV detectors are available for use with a wide range of long-lasting, interchangeable smart-sensors for the detection of O₂, H₂S, CO, NH₃, SO₂, Cl₂, ClO₂, PH₃, NO₂, HCN, HCl, ETO, HF, O₃, NO, H₂ and more.

Easy Operation

The Micro IV keeps gas detection simple. Most day-to-day functions are controlled with a single button, and calibration is fully automatic. Simply select the calibration mode from the keypad, attach the adapter and flow gas to the sensor. The GfG Autocal® feature automatically makes the adjustments and updates the information in the instrument s on-board memory.

Up to six months of battery life

The Micro IV delivers up to 3,000 hours of continuous operation from a single off the shelf AA alkaline battery. Battery replacement, when needed, can be completed in less than 30 seconds and requires no tools.

Clip-on attachment

The Micro IV comes with a heavy duty alligator clip that allows the detector to be conveniently clipped on to clothing and if so desired near the breathing zone.

Optional motorized pump

The Micro IV is available with an optional motorized pump to allow sampling from a remote location. The motorized pump may also be used in extraordinary harsh conditions, such as extreme heat, where it may be desirable to protect the instrument under protective clothing; using a tube the pump can draw air samples from the breathing zone.

Large graphic display

The Micro IV detector features a large backlit easy-to-read graphic display that provides a continuous readout for the sensor installed. By pressing a single button additional information such as Peak, STEL and TWA readings my be displayed.

Audible, vibrating and visual alarms

The Micro IV detector features a loud alarm (95db at 12 inches), a built-in vibrating alarm and a bright multi-directional visual LED alarm light.

Lifetime warranty

The Micro IV carries a lifetime warranty on non-consumable components and two or more years of warranty on most sensors. Select sensors such as O2, H2S, and CO carry a full three year warranty against failure.

DS220 docking station

The Micro IV is available with a six position fully automatic docking station. The docking station makes bump test and calibration even easier and all maintenance records are stored automatically. The docking station fully test sensor response, alarms and other functionality.

Features

• Highly configurable smart sensor design
• Wide range of sensors including O₂, H₂S, CO, NH₃, SO₂, CL₂, CLO₂, PH₃, NO₂, HCN, HCl, ETO, HF, O₃, NO, H₂, THT and more!
• Full 3-year warranty on O₂, CO and H₂S sensors
• Optional sample draw pump
• Large display with real-time readout
• Event / Datalogging standard
• Programmable ceiling (3), STEL & TWA alarms
• Vibrating Alarm standard
• AutoCal® automatic calibration
• Optional docking station

Standard Accessories

• Micro IV detector
• Specified Sensor
• Alkaline Battery
• Rubber Boot
• Manual

Ammonia (NH3), 5 ppm, 0 to 500 ppm Replacement Sensors

Ozone (O3), 0 - 1.00 ppm, Replacement Sensor with 1-Year Warranty

1418-115 Micro IV Single Gas Detector with 2-Year Sensor Warranty, Nitric Oxide (NO), 0 - 100 ppm by GfG

Durable, compact design

The Micro IV is compact, robust and very easy to use. It is designed to be used in the harshest environments. The Micro IV includes a set of rubber boots to withstand hard knocks and drops.

Widest Range of sensors

Micro IV detectors are available for use with a wide range of long-lasting, interchangeable smart-sensors for the detection of O₂, H₂S, CO, NH₃, SO₂, Cl₂, ClO₂, PH₃, NO₂, HCN, HCl, ETO, HF, O₃, NO, H₂ and more.

Easy Operation

The Micro IV keeps gas detection simple. Most day-to-day functions are controlled with a single button, and calibration is fully automatic. Simply select the calibration mode from the keypad, attach the adapter and flow gas to the sensor. The GfG Autocal® feature automatically makes the adjustments and updates the information in the instrument s on-board memory.

Up to six months of battery life

The Micro IV delivers up to 3,000 hours of continuous operation from a single off the shelf AA alkaline battery. Battery replacement, when needed, can be completed in less than 30 seconds and requires no tools.

Clip-on attachment

The Micro IV comes with a heavy duty alligator clip that allows the detector to be conveniently clipped on to clothing and if so desired near the breathing zone.

Optional motorized pump

The Micro IV is available with an optional motorized pump to allow sampling from a remote location. The motorized pump may also be used in extraordinary harsh conditions, such as extreme heat, where it may be desirable to protect the instrument under protective clothing; using a tube the pump can draw air samples from the breathing zone.

Large graphic display

The Micro IV detector features a large backlit easy-to-read graphic display that provides a continuous readout for the sensor installed. By pressing a single button additional information such as Peak, STEL and TWA readings my be displayed.

Audible, vibrating and visual alarms

The Micro IV detector features a loud alarm (95db at 12 inches), a built-in vibrating alarm and a bright multi-directional visual LED alarm light.

Lifetime warranty

The Micro IV carries a lifetime warranty on non-consumable components and two or more years of warranty on most sensors. Select sensors such as O2, H2S, and CO carry a full three year warranty against failure.

DS220 docking station

The Micro IV is available with a six position fully automatic docking station. The docking station makes bump test and calibration even easier and all maintenance records are stored automatically. The docking station fully test sensor response, alarms and other functionality.

Features

• Highly configurable smart sensor design
• Wide range of sensors including O₂, H₂S, CO, NH₃, SO₂, CL₂, CLO₂, PH₃, NO₂, HCN, HCl, ETO, HF, O₃, NO, H₂, THT and more!
• Full 3-year warranty on O₂, CO and H₂S sensors
• Optional sample draw pump
• Large display with real-time readout
• Event / Datalogging standard
• Programmable ceiling (3), STEL & TWA alarms
• Vibrating Alarm standard
• AutoCal® automatic calibration
• Optional docking station

Standard Accessories

• Micro IV detector
• Specified Sensor
• Alkaline Battery
• Rubber Boot
• Manual

Hydrogen Chloride (HCl) Replacement Sensors

Calibration Kit with 4-way Gas and 1.0 lpm Regulator (for Use with HCl and Cl2).

Include: ABS carrying case, fixed flow regulator (as specified), calibration adapter and tubing.

Ammonia (NH3) 0 - 100 ppm for Low Temperatures (-40°F to 60°F) Replacement Sensor

Hydrogen Chloride (HCl) Replacement Sensor

Optimized Catalytic Sensor MK 208-1

GMA - SPG. Rack Mount Power Supply.

Note: This item requires 1 card slot (3HE x 21TE).

Ammonia (NH3) 0 - 100 ppm for Standard Temperatures (-4°F to 104°F) Replacement Sensor

1418-116 Micro IV Single Gas Detector with 2-Year Sensor Warranty, Nitrogen Dioxide (NO2), 0 - 30 ppm by GfG

Durable, compact design

The Micro IV is compact, robust and very easy to use. It is designed to be used in the harshest environments. The Micro IV includes a set of rubber boots to withstand hard knocks and drops.

Widest Range of sensors

Micro IV detectors are available for use with a wide range of long-lasting, interchangeable smart-sensors for the detection of O₂, H₂S, CO, NH₃, SO₂, Cl₂, ClO₂, PH₃, NO₂, HCN, HCl, ETO, HF, O₃, NO, H₂ and more.

Easy Operation

The Micro IV keeps gas detection simple. Most day-to-day functions are controlled with a single button, and calibration is fully automatic. Simply select the calibration mode from the keypad, attach the adapter and flow gas to the sensor. The GfG Autocal® feature automatically makes the adjustments and updates the information in the instrument s on-board memory.

Up to six months of battery life

The Micro IV delivers up to 3,000 hours of continuous operation from a single off the shelf AA alkaline battery. Battery replacement, when needed, can be completed in less than 30 seconds and requires no tools.

Clip-on attachment

The Micro IV comes with a heavy duty alligator clip that allows the detector to be conveniently clipped on to clothing and if so desired near the breathing zone.

Optional motorized pump

The Micro IV is available with an optional motorized pump to allow sampling from a remote location. The motorized pump may also be used in extraordinary harsh conditions, such as extreme heat, where it may be desirable to protect the instrument under protective clothing; using a tube the pump can draw air samples from the breathing zone.

Large graphic display

The Micro IV detector features a large backlit easy-to-read graphic display that provides a continuous readout for the sensor installed. By pressing a single button additional information such as Peak, STEL and TWA readings my be displayed.

Audible, vibrating and visual alarms

The Micro IV detector features a loud alarm (95db at 12 inches), a built-in vibrating alarm and a bright multi-directional visual LED alarm light.

Lifetime warranty

The Micro IV carries a lifetime warranty on non-consumable components and two or more years of warranty on most sensors. Select sensors such as O2, H2S, and CO carry a full three year warranty against failure.

DS220 docking station

The Micro IV is available with a six position fully automatic docking station. The docking station makes bump test and calibration even easier and all maintenance records are stored automatically. The docking station fully test sensor response, alarms and other functionality.

Features

• Highly configurable smart sensor design
• Wide range of sensors including O₂, H₂S, CO, NH₃, SO₂, CL₂, CLO₂, PH₃, NO₂, HCN, HCl, ETO, HF, O₃, NO, H₂, THT and more!
• Full 3-year warranty on O₂, CO and H₂S sensors
• Optional sample draw pump
• Large display with real-time readout
• Event / Datalogging standard
• Programmable ceiling (3), STEL & TWA alarms
• Vibrating Alarm standard
• AutoCal® automatic calibration
• Optional docking station

Standard Accessories

• Micro IV detector
• Specified Sensor
• Alkaline Battery
• Rubber Boot
• Manual

Ethylene Oxide (C2H4O), 0 - 20 ppm, Replacement Sensor with 2-Years Warranty

Extended 6-year Sensor Warranty (O2, LEL, CO and H2S)

Chlorine Dioxide (ClO2), 0 - 2 ppm, Replacement Sensor with 2-Years Warranty

Ammonia (NH3) Replacement Sensor, 2 ppm Resolution, 0 - 100 ppm Range

Calibration Kit for GMA 313 with 1.5% and 3.0% vol. CO2 gases, & zero gas.

Calibration Kits with gas include blow-molded case, 34 L carbon dioxide (CO2) calibration gas cylinders (1.5 % volume, and 3.0 % volume) 34 L zero air calibration gas, 0.5 lpm fixed flow regulator, calibration adapter, and tubing.

GMA 40 Key Operated Switch for group relays.

Includes 5 relays: 3 alarms, 1 fault and 1 alarm-stop

Ammonia (NH3) Replacement Sensor, 2 ppm Resolution, 0 - 500 ppm Range

Hydrogen Fluoride (HF), 0 - 10.0 ppm, Replacement Sensor with 1-Year Warranty

Ammonia (NH3) Replacement Sensor, 1 ppm Resolution, 0 - 500 ppm Range