$500 - $750

MCXL-X0HM-Y-NA GasAlertMicroClip XL Detector Oxygen (O2), Hydrogen Sulfide (H2S), Carbon Monoxide (CO) - Yellow Housing by BW Technologies

The easy to wear, slim and compact GasAlertMicroClip provides affordable protection from atmospheric gas hazards. For standard operation with features you can count on, opt for the GasAlertMicroClip XT. For extended battery life, especially in cold weather, choose the GasAlertMicroClip XL. Both offer visual compliance at a glance with the flashing, green IntelliFlash™. Easy onebutton operation reduces training time and lets workers focus on the job at hand. For simple, cost-effective management of your records, calibration and bump testing, choose BW's MicroDock II automatic test and calibration system and Fleet Manager II software.

• Easy and comfortable to wear; thin and lightweight
• Easy operation and straightforward training with one-button simplicity
• Easy visual compliance with flashing, green IntelliFlash™
• Easy and cost effective to own

Additional GasAlertMicroClip features:

• Choose the GasAlertMicroClip XL for cold weather performance
• IntelliFlash™ verifies operation and compliance to both the user and supervisor
• Tamper-proof, one button operation
• Powered by a rechargeable lithium polymer battery

Standard features of BW multi-gas products:

• Continuous LCD shows real-time gas concentrations
• Compact and lightweight design makes it comfortable to wear
• Water-resistant
• Simple automatic calibration procedure; compatible with BW MicroDock II automatic test and calibration station
• Full function self-test of sensor, battery status, circuit integrity and audible/visual alarms on start up
• Bright wide-angled visual alarm bars
• Built-in concussion-proof boot
• Multi-language support in English, French, German, Spanish and Portuguese
• Conveniently manage your fleet using Fleet Manager II

Part Number: MCXLX0HMYNA

72-RA-C GX-3R 4-Gas Confined Space Monitor, LEL / O2 / Combo H2S / CO with Li-Ion Battery Pack with 100-240 VAC Charger by RKI Instruments

OSHA defines the breathing zone as a ten inch radius around the worker's nose and mouth, and requires that worker exposure monitoring air samples be collected in the breathing zone. Air sampling filters may be attached to the collar or lapel. Traditionally this means only a single gas monitor would be small enough for a worker to practically wear a gas monitor 'In the breathing zone'. Now there is a 4 gas monitor smaller than many single gas monitors.

The GX-3R is the worlds smallest 4 gas monitor weighing only 3.52 ounces and can comfortably be clipped within a worker's breathing zone (2.2" W x 2.55" H x 1.02" D). It simultaneously monitors and displays LEL combustibles, O₂, CO (Hydrogen compensated CO also available), and H₂S.

The GX-3R represents the latest evolution of gas detection technology utilizing a new generation of micro sensors. The LEL sensor has a unique design with two active filaments in one sensor to increase it's resistance to silicone poisoning. If one filament gets poisoned the second filament takes over. The new O₂ sensor is electrochemical with a 3 to 5 year life span. H₂S and CO are now available in a combo micro sensor.

Safety supervisors will appreciate the non-compliance indicator. The instrument flashes it's 3 LED lights every 30 seconds in the following conditions; if the instrument has not been bump tested, or if calibration is due, or if there was a gas alarm event. The 3 LED lights will continue to flash once every 30 seconds until the non-compliance condition has been resolved. The 30 second interval is adjustable.

Features

• Smallest & lightest 4 gas monitor: 2.2" W x 2.55" H x 1.02" D, 3.52 ounces
• Simultaneous detection of 4 gases: LEL, O2, H2S & CO; H2 Compensated CO sensor available
• Simple 2-button operation
• Non-Compliance Indicator
• Alarms: audible, visual, & vibration
• 3 user adjustable alarm levels
• Impact resistant body with removable rubber boot
• Large LCD Auto-backlit display
• 25 hours of operation (Lithium-ion battery)
• Field replaceable sensors & filters
• Water and dust resistant design, IP66/68
• Stealth mode for law enforcement
• 3 Year warranty

Applications

• Personal monitoring
• Confined spaces
• Refineries/petrochemical
• Utilities
• Oil and Gas
• Water/wastewater
• Fire services
• Construction

*Please note we can only ship RKI products to customers within the United States

BWS1-C-Y BW Solo Single-Gas Detector, (Cl2) Wireless - Yellow by BW Technologies

The next-generation single-gas detector that helps you reduce cost, ensure compliance and know your workers are protected.

Honeywell BW™ Solo has everything you expect - plus additional features to make your compliance easier and more cost-effective than ever. All with a reliable life span, one-button operation and small, lightweight profile. Honeywell BW™ Solo is:

• The easiest single-gas detector to service, with no need to take it apart to replace sensors, batteries and sensor filters. That means long life and low cost.
• Complete with an extensive selection of sensor options. Count on comprehensive detection, whether you're monitoring for common or exotic hazards.
• The first single-gas detector with the 1-Series sensor for CO, H2S and O2. That means high accuracy, lower costs and faster sensor response time for the gases you monitor most often.
• Compatible with IntelliDoX. Save time and centralize data with automated bump testing, calibration and instrument management. Use IntelliDoX docking stations with Honeywell SafetySuite Device Configurator software.

FEATURES & BENEFITS

For even more time-saving convenience - plus remote visibility on alarms choose the wireless version. And manage it from your smartphone.

Pair the wireless Honeywell BW™ Solo with our Safety Communicator mobile app and detector readings are sent instantly to Honeywell s real-time monitoring software. Access it from any device with an internet connection, and get remote visibility on worker safety and location.

You can also use the wireless Honeywell BW™ Solo to share gas data with the desktop software - no dock required.

Other Honeywell BW™ Solo features:

• Option to activate IntelliFlash™ or non-compliance flash
• Ability to assign detectors to workers and locations
• Easy-to-read display for multiple languages
• Data logging with rolling 24-hour peak reading

Part Number: BWS1-C-Y

PS-RC10 Replacement Chlorine (Cl2) Sensor

TN400 Turbidity Meter by Apera

Portable, Reliable, and Affordable. The Apera Instruments TN400 Portable Turbidity Meter is equipped with a large TFT colored screen (blue for measurement, green for calibration), supporting display of graphic/text operation guides and a progress bar showing measurement progress. The test kit comes with 4 kinds of Reagecon high-molecular polymer turbidity standard solutions (0.02 NTU, 20.0 NTU, 100 NTU, 800 NTU), which are U.S. EPA certified, non-toxic, accurate, and easy to use, having evident advantages compared with traditional Formazin standard solution (highly toxic and inaccurate).

The meter is CE certified and comes with a 2-year warranty. The company designs and manufactures laboratory analytical instruments like pH meters, conductivity meters, electrodes, and buffer solutions for over 25 years.

• Accurate and consistent turbidity test result
• Easy and quick calibration
• TFT Colored Screen (measurement mode, green in calibration) with graphic and text operation guides
• U.S. EPA certified, non-toxic, easy-to-use Reagecon high-molecular polymer standard solutions
• CE certified and comes with 2-Year Warranty

D4-RHM04 Replacment Twin Tox Sensor - Carbon Monoxide (CO) and Hydrogen Sulfide (H2S)

• BW Defender
• GasAlertMicro
• GasAlertMax
• GasAlertMicro 5 series

*Please note we can only ship RKI products to customers within the United States

PT-4000S Smart Portable Turbidity Meter by Peak Instruments

Main Features

• 4.3 inch color LCD screen with friendly UI makes operations easy.
• Big storage space and support USB storage and data transfer to USB drive.
• There are three standard piecewise curves in the system. Customers can create up to 200 piecewise curves subject to different concentrations which will literally improve measurement precision.
• Adopt ARM9 main control chip which makes operations easy and smooth, instrument respond quickly.
• USB and RS232 port for data transfer and printer connection.
• Adopt special and high precision light filter system to ensure the instrument's stability and measurement precision.
• Cold light source, narrowband interference, with long lifetime up to 100,000 hours.

WD-35640-32 DO 450 Portable Waterproof DO Meter by Oakton

The RDO 450 meter uses optical measurement technology offering fast response times and long-term stability with minimal maintenance. Plus automatic temperature compensation (ATC), barometric pressure compensation, and salinity correction to further ensure measurement accuracy. The large, backlit LCD lets you view % saturation or mg/L (ppm) simultaneously with temperature.

Rugged, IP67-rated waterproof housing make the meter ideal for plant or field testing. Additional features include ready (stability) indicator, smart averaging, hold function, calibration alarm, and battery-life indicator.

Perform data logging with manual or timed collection of up to 500 data sets with real-time clock time/date stamp. Order optional data cables for USB and RS-232 connectivity.

• Eliminates costly, tiresome membranes and solutions
• Rugged, IP67-rated housing for plant and field applications
• USB and RS-232 output for up to 500 data sets
• 500 hours battery life, or optional universal power adapter
• Built-in stand with wall mount allows for easy benchtop measurement or storage

Xgard Gas Detectors

Crowcon is a global leader in designing and manufacturing gas detection technology and equipment. The company has been in operation for over 40 years and is consistently building upon its products. By integrating modern technology with the demands of the modern workplace, Crowcon has developed a line of gas detection devices and monitors that lead the competition. The Xgard range of gas detectors is a product of Crowcon s successful integration and technological advancements. With a wide range of sensor types and available accessories, the Xgard series is suitable for all worksites and is customizable enough to fit any needs.

Tough and reliable

The Xgard series of fixed point gas detectors is incredibly durable and reliable. The casings and materials, including weatherproof caps, are designed to protect the equipment from the harshest environments. The detectors are made from a variety of materials depending on the model: glass reinforced nylon, aluminum with polyester coating, and 316 stainless steel.

Variety of sensors

The fixed point gas detector offers a wide range of sensors for to suite almost all applications. The Xgard range of gas detectors is available in three models to meet varying worksite needs: flameproof, intrinsically safe, and safe area formats. Additionally, Xgard offers different types of fixed point gas detectors within these three models:

• Xgard Type 1- Intrinsically safe toxic and oxygen gas detectors
• Xgard Type 2- Flameproof toxic and oxygen gas detectors
• Xgard Type 3- Flameproof flammable gas detector
• Xgard Type 4- Flameproof high temperature flammable gas detector
• Xgard Type 5- Flameproof flammable gas detector with 4-20mA output
• Xgard Type 6- Flameproof thermal conductivity type gas detector
• Xsafe- Safe area flammable gas detector

Cost efficient and highly effective

With quick and easy installation and maintenance, the Xgard series is able to keep costs at a minimum. The replacement sensors, for example, are simple to replace by merely plugging them in. The replacement parts are also readily available and compatible with all Xgard models, thereby reducing the amount of required spare parts that are stored in the facility. Additionally, the sensors have two times the typical life spans of similar sensors in the industry. With a 2 year life span, worksites can expect to cut their sensor replacement costs in half. For worksites that require slightly more customization, Crowcon offers compatible accessories for the Xgard series such as sampling applications, remote gassing applications, spray deflectors, sun shields, weatherproof caps, collector cones, flow adapter, and accessories adapter.

Xgard also has flexible installation options. The unit is designed for either wall or ceiling mounts, and users will not need to purchase additional equipment for mounting. For more complex installation needs, users can purchase accessories.

Specifications

Each model is approximately the same size with dimensions of 6.1 x 6.5 x 4.3 inches and weighing approximately 1 or 2 pounds. The battery type, electrical output, and power requirements vary based on the sensor type. For a complete listing of gas sensors, types, and individual specifications, please see the product specifications listing.

MCXL-XW00-Y-NA GasAlertMicroClip XL Detector Combustible (%LEL), Oxygen (O2) - Yellow Housing by BW Technologies

Do you require portable dual gas monitor equipment that measures oxygen and LEL (lower explosive limit) for maximum worker safety? Is cost very important? How about ease of use and convenience? You should check out all the features and price of the GasAlertMicroClip XL.

Maybe you have heard of the GasAlertMicroClip XT or you might even be using some of them. The GasAlertMicroClip XL has all the great functions and benefits of the XT with one addition. It is made to provide longer battery life. In fact, it is 8 hours longer than the XT model (18 hrs). This is an important feature for long shifts and cold environments.

Compliance checking is simple and easy because the GasAlertMicroClip XL uses the latest IntelliFlash™ technology. In addition, a gas monitor that is simple to wear and lightweight, allows for working without distractions. And, training is very quick and simple because you only have to operate a single button. All throughout the shift, the GasAlertMicroClip works, monitoring O2 and LEL.

If you use the MicroDock II or Fleet Manager II you are in luck. The GasAlertMicroClip XL is specifically designed to work with them. You can even use XL and XT models together.

Why Include GasAlertMicroClip XL in Your Fleet?

• Light and easy to carry around it weighs just 6.7 ounces
• Full 2 year warranty (including the sensors)
• Works in temps as low as -4F
• Affordable can save you money over time
• Water resistant
• Easy and quick compliance verification
• Automatic instrument calibration
• Checks its own vital functions on start up
• Continuous O2 monitoring
• Checks LEL (lower explosive limit)
• Resistant to concussion and impacts
• Supports Spanish, English, German, French, and Portuguese
• IP 66 compliant

GasAlertMicroClip XL Comes with:

• Lithium polymer battery
• AC charger
• Stainless steel alligator clip
• Test hose and calibration cap
• Operating manual with CD

Part Number: MCXLXW00YNA

MGC Detector Sold Separately

Part Number: 2992-0035

Part Number: DOCK2G