$500 - $750, GfG

Ammonia (NH3) Replacement Sensor, 1 ppm Resolution, 0 - 1000 ppm Range

Hydrogen Chloride (HCI), 0 - 30 ppm, Replacement Sensor with 1-Year Warranty

GMA R4 Rack Mounted Enclosure (3HE x 28TE)

Calibration Kit with 5-way Gas (O2, CO, CH4, H2S and CO2) 0.5 lpm Regulator.

Include: ABS carrying case, fixed flow regulator (as specified), calibration adapter and tubing

Calibration Kit with 4-way and Isobutylene Gas and 0.5 lpm Regulator.

Include: ABS carrying case, fixed flow regulator (as specified), calibration adapter and tubing

1418-120 Micro IV Single Gas Detector with 2-Year Sensor Warranty, Hydrogen Cyanide (HCN), 0 - 50 ppm by GfG

Durable, compact design

The Micro IV is compact, robust and very easy to use. It is designed to be used in the harshest environments. The Micro IV includes a set of rubber boots to withstand hard knocks and drops.

Widest Range of sensors

Micro IV detectors are available for use with a wide range of long-lasting, interchangeable smart-sensors for the detection of O₂, H₂S, CO, NH₃, SO₂, Cl₂, ClO₂, PH₃, NO₂, HCN, HCl, ETO, HF, O₃, NO, H₂ and more.

Easy Operation

The Micro IV keeps gas detection simple. Most day-to-day functions are controlled with a single button, and calibration is fully automatic. Simply select the calibration mode from the keypad, attach the adapter and flow gas to the sensor. The GfG Autocal® feature automatically makes the adjustments and updates the information in the instrument s on-board memory.

Up to six months of battery life

The Micro IV delivers up to 3,000 hours of continuous operation from a single off the shelf AA alkaline battery. Battery replacement, when needed, can be completed in less than 30 seconds and requires no tools.

Clip-on attachment

The Micro IV comes with a heavy duty alligator clip that allows the detector to be conveniently clipped on to clothing and if so desired near the breathing zone.

Optional motorized pump

The Micro IV is available with an optional motorized pump to allow sampling from a remote location. The motorized pump may also be used in extraordinary harsh conditions, such as extreme heat, where it may be desirable to protect the instrument under protective clothing; using a tube the pump can draw air samples from the breathing zone.

Large graphic display

The Micro IV detector features a large backlit easy-to-read graphic display that provides a continuous readout for the sensor installed. By pressing a single button additional information such as Peak, STEL and TWA readings my be displayed.

Audible, vibrating and visual alarms

The Micro IV detector features a loud alarm (95db at 12 inches), a built-in vibrating alarm and a bright multi-directional visual LED alarm light.

Lifetime warranty

The Micro IV carries a lifetime warranty on non-consumable components and two or more years of warranty on most sensors. Select sensors such as O2, H2S, and CO carry a full three year warranty against failure.

DS220 docking station

The Micro IV is available with a six position fully automatic docking station. The docking station makes bump test and calibration even easier and all maintenance records are stored automatically. The docking station fully test sensor response, alarms and other functionality.

Features

• Highly configurable smart sensor design
• Wide range of sensors including O₂, H₂S, CO, NH₃, SO₂, CL₂, CLO₂, PH₃, NO₂, HCN, HCl, ETO, HF, O₃, NO, H₂, THT and more!
• Full 3-year warranty on O₂, CO and H₂S sensors
• Optional sample draw pump
• Large display with real-time readout
• Event / Datalogging standard
• Programmable ceiling (3), STEL & TWA alarms
• Vibrating Alarm standard
• AutoCal® automatic calibration
• Optional docking station

Standard Accessories

• Micro IV detector
• Specified Sensor
• Alkaline Battery
• Rubber Boot
• Manual

Calibration Kit with ABS Carrying Case, 34 L Zero Air Calibration Gas, 0.5 lpm Fixed FLow Regulator, Calibration Adapter and Tubing

Chlorine (Cl2) Replacement Sensors

Ethylene Oxide (C2H4O) Replacement Sensor

Calibration Kit without Gas, with 0.5 lpm Regulator (Not for Use with Cl2) for Cylinders with Outside Thread (34L Steel)

Ammonia (NH3) 0 - 500 ppm for Standard Temperatures (-4°F to 104°F) Replacement Sensor

Calibration Kit without Gas, with 0.5 lpm Regulator (Not for Use with Cl2) for Cylinders with Inside Thread (103 L Steel and all aluminum)

Calibration Kit without Gas, with Blue BLow-Molded case and 0.5 lpm Regulator (Not for Use with Cl2) for Ammonia (NH3) Configurations

Calibration Kit without Gas, with Blue BLow-Molded Carrying Case (for 58L and 103L Cylinders), 0.5 lpm Fixed FLow Regulator (2603-025), Calibration Adapter and Tubing