$50 - $75, Digital Thermometers, Digi-Sense

94460-79 Traceable® Radio-Signal Remote Thermometer with Calibration by Digi-Sense

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

A total of three modules may be used with the main receiver.

• Get accurate, reliable measurements with included NIST-traceable calibration

Includes

NIST-traceable calibration certificate with data.

90002-02 Traceable® Time and Date Digital Thermometer with Calibration; Bottle Probe by Digi-Sense

Ideal for monitoring temperature in the lab, home or office. Thermometer includes a remote probe with 6-ft (1.8m) cable to measure outdoor temperature and an internal sensor to measure indoor temperature. Display can be changed to show probe or ambient temperature, time of day, and month/day.

Thermometer can also display the exact time and date when the minimum and maximum temperature occurred. The temperature sensor performs accurately in most environments even including under water. Use rear stand to place unit on table or attach to wall via Velcro® strip or the two rear-mounted screw holes.

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

Model 90002-02 is supplied with special bottle probe specifically designed for refrigerator/freezer applications. The temperature sensor is enclosed in a bottle which protects it from rapid temperature changes when refrigerator door is opened.

• Get accurate, reliable measurements with included NIST-traceable calibration
• Simultaneously displays temperatures and time
• Wire mounting bracket permits easy probe placement

Includes

NIST-traceable calibration certificate with data and one AAA alkaline battery

90205-01 Traceable® Pen-Style Digital Thermometer with Calibration, High-Accuracy; 8" L, 302 F by Digi-Sense

NIST-traceable precalibration means you get reliable measurements right out of the box, saving you time and money! Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

Perfect-sized unit fits into flasks, cuvets, test tubes, and beakers. Read temperatures in foods, gases, samples, reagents, water baths, and semisolids. Stainless-steel probe is resistant to most laboratory chemicals. Long stem allows user to make measurements while stirring solutions in deep vessels. Almost unbreakable plastic and stainless-steel construction (no glass or mercury) makes it safe. Brilliant LCD is 1/4-inch-high. Designed for all ovens and incubators.

• Get accurate, reliable measurements with included NIST-traceable calibration

Includes

NIST-traceable calibration certificate with data.

90205-02 Traceable® Pen-Style Digital Thermometer with Calibration, High-Accuracy; 11.5" L, 302F by Digi-Sense

NIST-traceable precalibration means you get reliable measurements right out of the box, saving you time and money! Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

Perfect-sized unit fits into flasks, cuvets, test tubes, and beakers. Read temperatures in foods, gases, samples, reagents, water baths, and semisolids. Stainless-steel probe is resistant to most laboratory chemicals. Long stem allows user to make measurements while stirring solutions in deep vessels. Almost unbreakable plastic and stainless-steel construction (no glass or mercury) makes it safe. Brilliant LCD is 1/4-inch-high. Designed for all ovens and incubators.

• Get accurate, reliable measurements with included NIST-traceable calibration

Includes

NIST-traceable calibration certificate with data.

90205-20 Traceable® Remote Probe Thermometer with Calibration; ±1.0°C accuracy (-20 to 100°C) by Digi-Sense

Magnetic back allows for placement on metal surfaces such as freezers, incubators, or water baths. Includes a flip-open stand for use on bench or desktop, and a spring fastener for clipping onto any edge.

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

• Get accurate, reliable measurements with included NIST-traceable calibration
• Probe and cable may be totally immersed in liquid
• Readings update every second
• °F/°C switchable ranges

Includes

Probe, cable, flip-open stand, clip, magnetic back, battery, and NIST-traceable calibration certificate with data.

90205-21 Traceable® Deluxe Remote Probe Thermometer with Calibration; ±1.0° accuracy (-20 to 100°C) by Digi-Sense

Deluxe remote-probe thermometers feature high/low alarm, MIN/MAX, and HOLD. Magnetic back allows for placement on metal surfaces such as freezers, incubators or water baths. Includes a flip-open stand for use on bench or desktop, and spring fastener for clipping on to any edge.

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

• Get accurate, reliable measurements with included NIST-traceable calibration
• Probe and cable may be totally immersed in liquid
• Readings update every second
• °F/°C switchable ranges

Includes

Probe, cable, flip-open stand, clip, magnetic back, battery, and NIST-traceable calibration certificate with data.

94460-56 Traceable® Digital Bottle Thermometer with Liquid Fill and Calibration; Std Accuracy by Digi-Sense

Accurately monitor temperatures in freezers, refrigerators, incubators, and environmental chambers with this temperature-buffered sensor. The probe is sealed in a miniature bottle filled with nontoxic glycol or glass beads. Bottle and solution are designed to insulate the sensor from rapid changes, such as when a refrigerator door is opened. Easy-to-read digital display shows current temperatures and min/max by monitoring the high and low readings for any time period.

The entire unit is waterproof and comes equipped with a stainless-steel sensor that assures long product life. Supplied with unique chemical-resistant ABS plastic holder that can be placed on a self or affixed to a refrigerator or any wall. Bottle may be removed from holder.

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

• Get accurate, reliable measurements with included NIST-traceable calibration
• Waterproof
• Displays high/low readings
• Features a bottle sensor.

Includes

Holder/stand, double back tape, hook and loop tape and one silver-oxide battery, and NIST-traceable calibration certificate with data.

94460-62 Traceable® Two-Channel Digital Thermometer with Calibration; 2 Bottle Probes by Digi-Sense

The dual probe design is perfect for monitoring temperature in two separate areas or measure two adjoined areas to insure uniformity. Ideal for cold storage, chemicals, pharmaceuticals, and more. The two channels records the date and time of the minimum and maximum readings, while independently monitoring user programmable high and low alarms. The built-in alarm provides an alert when the temperature readings exceed the pre-set alarm limits, an audible alert will sound and a red LED will flash. If the readings return to acceptable limits, the audible alarm will turn off however, the LED will continue to flash until reset to indicate that during the test period an alarm was reached. Alarm is programmable in 1° increments. Probe is attached to a 3-1/2-ft (1.05 m) micro-cable that permits a doors to close on it; probe and cable are both submersible. Mount meter with included Velcro™, magnetic strips, or use flip-open stand on benchtop.

Model 94460-62 is supplied with special bottle probe specifically designed for refrigerator/freezer applications. The temperature sensor is enclosed in a bottle, which protects it from rapid temperature changes when refrigerator door is opened

• Displays date and time when Min/Max temperatures occur

Includes

NIST-traceable calibration report supplied by the manufacture, Velcro® and magnetic strips, and one AAA alkaline battery.

94460-70 Traceable® General-Purpose Digital Thermometer with Calibration; 1 Wire Probe by Digi-Sense

Easily monitor temperature in liquids, baths, air/gas, incubators, refrigerators, or freezers. Keep track of temperature conditions overnight or for any time period - minimum and maximum temperatures are stored until the memory is cleared. Models feature a triple display that simultaneously shows current, minimum, and maximum temperatures. Set high and low alarms in 1° increments; alarm sounds when temperature rises above or falls below set points, and continues to sound even if temperature returns to nonalarm range. Thermometer reads ambient temperature or probe temperature.

Probe is attached to a 10-ft (3 m) micro-cable that permits a doors to close on it; probe and cable are both submersible. Mount meter with included Velcro® strips, wall-mount slots, or use flip-open stand on benchtop.

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

Models 94460-70 has a wire probe and designed for general-purpose applications.

• Get accurate, reliable measurements with included NIST-traceable calibration
• Triple-display - shows high, low, and current temperature simultaneously

Includes

NIST-traceable calibration certificate with data, plastic stand, double back tape and Velcro® for attaching holder to any surface, probe(s), and two AA batteries

94460-71 Traceable® Fridge/Freezer Digital Thermometer with Calibration; 5 mL Bottle Probe by Digi-Sense

Easily monitor temperature in liquids, baths, air/gas, incubators, refrigerators, or freezers. Keep track of temperature conditions overnight or for any time period - minimum and maximum temperatures are stored until the memory is cleared. Models feature a triple display that simultaneously shows current, minimum, and maximum temperatures. Set high and low alarms in 1° increments; alarm sounds when temperature rises above or falls below set points, and continues to sound even if temperature returns to nonalarm range. Thermometer reads ambient temperature or probe temperature.

Probe is attached to a 10-ft (3 m) micro-cable that permits a doors to close on it; probe and cable are both submersible. Mount meter with included Velcro® strips, wall-mount slots, or use flip-open stand on benchtop.

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

Model 94460-71 is supplied with a special bottle probe specifically designed for refrigerator/freezer applications. The temperature sensor is enclosed in a bottle, which protects it from rapid temperature changes when refrigerator door is opened

• Get accurate, reliable measurements with included NIST-traceable calibration
• Triple-display - shows high, low, and current temperature simultaneously

Includes

NIST-traceable calibration certificate with data, plastic stand, double back tape and Velcro® for attaching holder to any surface, probe(s), and two AA batteries

94460-72 Traceable® Fridge/Freezer Digital Thermometer with Calibration; 1 Bottle Probe by Digi-Sense

Easily monitor temperature in liquids, baths, air/gas, incubators, refrigerators, or freezers. Keep track of temperature conditions overnight or for any time period - minimum and maximum temperatures are stored until the memory is cleared. Models feature a triple display that simultaneously shows current, minimum, and maximum temperatures. Set high and low alarms in 1° increments; alarm sounds when temperature rises above or falls below set points, and continues to sound even if temperature returns to nonalarm range. Thermometer reads ambient temperature or probe temperature.

Probe is attached to a 10-ft (3 m) micro-cable that permits a doors to close on it; probe and cable are both submersible. Mount meter with included Velcro® strips, wall-mount slots, or use flip-open stand on benchtop.

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

Model 94460-72 is supplied with a special bottle probe specifically designed for refrigerator/freezer applications. The temperature sensor is enclosed in a bottle, which protects it from rapid temperature changes when refrigerator door is opened

• Get accurate, reliable measurements with included NIST-traceable calibration
• Triple-display - shows high, low, and current temperature simultaneously

Includes

NIST-traceable calibration certificate with data, plastic stand, double back tape and Velcro® for attaching holder to any surface, probe(s), and two AA batteries

94460-73 Traceable® Jumbo Refrigerator/Freezer Thermometer with Calibration; 5 mL Bottle Probe by Digi-Sense

Thermometer is designed for monitoring freezers, water baths, heating blocks, incubators, refrigerators and other general-purpose applications. Display simultaneously shows maximum, minimum, and current probe temperatures. Min/max monitors high/low readings for any time period. Alarm is programmable in 1® increments. The 10-ft (3 m) micro-cable with solid-state probe permits doors to close on it.

Model 94460-73 is supplied with a 5ml bottle probe specifically designed to fit in to a tray. The glass bottle probe is sealed and filled with patented nontoxic glycol solution, which protects the sensor from rapid temperature changes when refrigerator door is opened.

• Product is factory calibrated, accuracy is based on calibration range
• Glass bottle probe are sealed and filled with unique nontoxic glycol solution
• Calibrated at 0.000°C and 50.000°C

Includes

NIST-traceable calibration certificate with data, Velcro® and magnetic strips, and one AAA alkaline battery.

94460-74 Traceable® Jumbo Refrigerator/Freezer Thermometer with Calibration; Bottle Probe by Digi-Sense

Thermometer is designed for monitoring freezers, water baths, heating blocks, incubators, refrigerators and other general-purpose applications. Display simultaneously shows maximum, minimum, and current probe temperatures. Min/max monitors high/low readings for any time period. Alarm is programmable in 1° increments. The 10-ft (3 m) micro-cable with solid-state probe permits doors to close on it.

Model 94460-74 is supplied with special bottle probe specifically designed for refrigerator/freezer applications. The glass bottle probe is sealed and filled with patented nontoxic glycol solution, which protects the sensor from rapid temperature changes when refrigerator door is opened.

• Product is factory calibrated, accuracy is based on calibration range
• Glass bottle probe are sealed and filled with unique nontoxic glycol solution

Includes

NIST-traceable calibration certificate with data, Velcro® and magnetic strips, and one AAA alkaline battery.

94460-76 Traceable® Sentry Triple-Display Thermometer with Calibration; -58 to 158F, Wire Probe by Digi-Sense

Thermometers include a weatherproof remote sensor with a 10-ft. (3.05m) long 1/16"-diameter micro cable. The micro cable is ideal for applications that require a seal, such as a refrigerator, where a larger cable would interfere with the sealing of the door. Unplugging the external probe will activate an internal sensor for monitoring ambient temperature. Thermometer features a high-impact ABS plastic case, large LCD that updates every 10 seconds, and a simple one-button reset to clear the high/low memory. Supplied with Velcro® strip for wall mounting or has a flip-out stand for tabletop use.

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

Models 94460-76 and -77 are designed for general-purpose applications

• Get accurate, reliable measurements with included NIST-traceable calibration
• Monitors temperature continuously

Includes

NIST-traceable calibration certificate with data, mounting hardware, and one battery.

94460-81 Traceable® Jumbo Fridge/Freezer Digital Thermometer with Calibration; Wire Probe by Digi-Sense

The jumbo digit thermometer is designed for monitoring freezers, water baths, heating blocks, incubators, refrigerators and other gerneral-purpose applications. Triple display simultaneously shows maximum, minimum, and current probe temperatures plus room temperature. Min/max monitors high/low readings overnight, on weekends, or for any time period -a significant advantage over reading-only glass thermometers. Alarm feature provides alert when temperature rises above or falls below a set point. Alarm is programmable in 1° increments. Ten-foot micro-cable with solid-state probe permits doors to close on it and eliminates mercury contamination.

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

Model 94460-81 is designed for general-purpose applications.

• Get accurate, reliable measurements with included NIST-traceable calibration
• Easy-view, jumbo 1 1/2-inch-high digits may be read from 30-feet
• Glass bottle probe are sealed and filled with nontoxic glycol solution
• Sensor with 10-foot cable
• Features a wire sensor that measures 3/16-inch dia. and is 3/4-inch long

Includes

NIST-traceable calibration certificate with data, flip-open stand, Velcro® and magnetic strips, and one AAA alkaline battery.

94460-82 Traceable® Jumbo Fridge/Freezer Digital Thermometer with Calibration; Bottle Probe by Digi-Sense

The jumbo digit thermometer is designed for monitoring freezers, water baths, heating blocks, incubators, refrigerators and other gerneral-purpose applications. Triple display simultaneously shows maximum, minimum, and current probe temperatures plus room temperature. Min/max monitors high/low readings overnight, on weekends, or for any time period -a significant advantage over reading-only glass thermometers. Alarm feature provides alert when temperature rises above or falls below a set point. Alarm is programmable in 1° increments. Ten-foot micro-cable with solid-state probe permits doors to close on it and eliminates mercury contamination.

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

Model 94460-82 is supplied with special bottle probe specifically designed for refrigerator/freezer applications. The temperature sensor is enclosed in a bottle, which protects it from rapid temperature changes when refrigerator door is opened.

• Get accurate, reliable measurements with included NIST-traceable calibration
• Easy-view, jumbo 1 1/2-inch-high digits may be read from 30-feet
• Glass bottle probe are sealed and filled with nontoxic glycol solution
• Sensor with 10-foot cable

Includes

NIST-traceable calibration certificate with data, flip-open stand, Velcro® and magnetic strips, and one AAA alkaline battery.

94460-83 Traceable® Jumbo Fridge/Freezer Digital Thermometer with Calibration; 5 mL Bottle Probe by Digi-Sense

The jumbo digit thermometer is designed for monitoring freezers, water baths, heating blocks, incubators, refrigerators and other gerneral-purpose applications. Triple display simultaneously shows maximum, minimum, and current probe temperatures plus room temperature. Min/max monitors high/low readings overnight, on weekends, or for any time period -a significant advantage over reading-only glass thermometers. Alarm feature provides alert when temperature rises above or falls below a set point. Alarm is programmable in 1° increments. Ten-foot micro-cable with solid-state probe permits doors to close on it and eliminates mercury contamination.

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

Model 94460-83 is supplied with a 5ml bottle probe specifically designed to fit in to a vaccine tray. The temperature sensor is enclosed in a small diameter bottle, which protects it from rapid temperature changes when refrigerator door is opened.

• Get accurate, reliable measurements with included NIST-traceable calibration
• Easy-view, jumbo 1 1/2-inch-high digits may be read from 30-feet
• Glass bottle probe are sealed and filled with nontoxic glycol solution
• Sensor with 10-foot cable
• Features a 5ml bottle that fits in vaccine tray

Includes

NIST-traceable calibration certificate with data, flip-open stand, Velcro® and magnetic strips, and one AAA alkaline battery.

94460-85 Traceable® Temp/RH Sensor for Wireless Thermometer/Humidity Set with Calibration by Digi-Sense

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

A total of three modules may be used with the main receiver.

• Get accurate, reliable measurements with included NIST-traceable calibration

Includes

NIST-traceable calibration certificate with data.

94460-87 Traceable® Sentry Triple-Display Thermometer with Calibration; Celsius, Bottle Probe by Digi-Sense

Thermometers include a weatherproof remote sensor with a 10-ft. (3.05m) long 1/16"-diameter micro cable. The micro cable is ideal for applications that require a seal, such as a refrigerator, where a larger cable would interfere with the sealing of the door. Unplugging the external probe will activate an internal sensor for monitoring ambient temperature. Thermometer features a high-impact ABS plastic case, large LCD that updates every 10 seconds, and a simple one-button reset to clear the high/low memory. Supplied with Velcro® strip for wall mounting or has a flip-out stand for tabletop use.

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

Models 94460-86 and -87 are supplied with special a bottle probe specifically designed for refrigerator/freezer applications. The temperature sensor is enclosed in a bottle which protects it from rapid temperature changes when refrigerator door is opened.

• Get accurate, reliable measurements with included NIST-traceable calibration
• Monitors temperature continuously

Includes

NIST-traceable calibration certificate with data, mounting hardware, and one battery.

94460-88 Traceable® Jumbo Refrigerator/Freezer Thermometer with Calibration; Wire Probe by Digi-Sense

Thermometer is designed for monitoring freezers, water baths, heating blocks, incubators, refrigerators and other general-purpose applications. Display simultaneously shows maximum, minimum, and current probe temperatures. Min/max monitors high/low readings for any time period. Alarm is programmable in 1° increments. The 10-ft (3 m) micro-cable with solid-state probe permits doors to close on it.

Model 94460-88 is designed for general-purpose applications.

• Product is factory calibrated, accuracy is based on calibration range
• Glass bottle probe are sealed and filled with unique nontoxic glycol solution

Includes

NIST-traceable calibration certificate with data, Velcro® and magnetic strips, and one AAA alkaline battery.

WD-20250-34 Precalibrated Folding Pocket Thermometer by Digi-Sense

Get years of reliable service with these handy temperature measurement instruments. Select from pen-style, large head, and folding-probe models.

All models feature

• Reliable measurements, guaranteed! Precalibrated to NIST-traceable standards.
• 304 stainless steel penetration probe
• User-selectable °F or °C
• Preserve battery with auto shut-off

Pen-style model (20250-33) features

• Min/Max/Hold button
• Protect probe against damage with probe guard protective sleeve

Large-head model (20250-32) features

• Won't roll when placed on a flat surface square head keeps it from tumbling
• Protect probe against damage with probe guard protective sleeve

Waterproof model with folding probe (20250-34) features

• HACCP-approved for food and lab applications
• IP67-rated for use in harsh conditions
• Min/Max/Hold button

Applications

• Food preparation/processing
• Laboratory
• Educational
• R&D
• Light industrial

Includes

Batteries and NIST-traceable calibration report with data supplied by InnoCal.