Digital Thermometers, Digi-Sense

94460-78 Traceable® Wireless Thermometer Set with Calibration; 1 Remote Module w/Bullet Probe by Digi-Sense

Wireless signal from weatherproof remote sensor broadcasts temperature measurements up to 100 feet in an open area. Each set consists of a main unit/receiver and a remote module. A total of three modules may be used with the main receiver. The receiver displays data from all three transmitting modules along with temperature trends. Display MIN/MAX values at the touch of a button. Alarm sounds when temperature exceeds or falls below limits on any channel. Alarm sounds for one minute or until muted or disabled. °F or °C selectable. Supplied with Velcro® and bracket for wall mounting or has a flip-out stand for tabletop use.

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

Bullet probe (3/4"L x 0.187" dia) is ideal for measuring air and liquid temperatures.

• Get accurate, reliable measurements with included NIST-traceable calibration
• Transmitting modules have a remote probe to measure air, liquids, or solids
• Monitors temperature continuously data is transmitted every 30 seconds
• Bullet probe sensor and cable may be completely immersed

Includes

NIST-traceable calibration certificate with data.

Main unit/receiver, remote module, Bullet probe (3/4"L x 0.187" dia) with 10-ft cable, flip-open stand, wall mount, batteries, and NIST-traceable certificate with data.

WD-20250-34 Precalibrated Folding Pocket Thermometer by Digi-Sense

Get years of reliable service with these handy temperature measurement instruments. Select from pen-style, large head, and folding-probe models.

All models feature

• Reliable measurements, guaranteed! Precalibrated to NIST-traceable standards.
• 304 stainless steel penetration probe
• User-selectable °F or °C
• Preserve battery with auto shut-off

Pen-style model (20250-33) features

• Min/Max/Hold button
• Protect probe against damage with probe guard protective sleeve

Large-head model (20250-32) features

• Won't roll when placed on a flat surface square head keeps it from tumbling
• Protect probe against damage with probe guard protective sleeve

Waterproof model with folding probe (20250-34) features

• HACCP-approved for food and lab applications
• IP67-rated for use in harsh conditions
• Min/Max/Hold button

Applications

• Food preparation/processing
• Laboratory
• Educational
• R&D
• Light industrial

Includes

Batteries and NIST-traceable calibration report with data supplied by InnoCal.

90205-10 Traceable® Pen-Style Digital Thermometer with Calibration, Key-Chain; 3" L, 300F by Digi-Sense

NIST-traceable precalibration means you get reliable measurements right out of the box, saving you time and money! Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

These thermometers are ideal for laboratory, field, and process measurements. Use to quickly verify termperature. Typical response time is 30 seconds for 99% of new reading. Thermometers have a 304 stainless steel penetration stem. All models include a protective case with pocket clip and a battery. Thermometer features a chemical resistant stainless steel stem, plastic casing, protective case with key chain ring, battery and is F°/C° selectable. Key-chain "Mini" Thermometer is pocket sized and perfect for carrying around anywhere. Clip onto a lab coat, jacket zipper, belt loop, backpack or clip it to a key ring.

• Get accurate, reliable measurements with included NIST-traceable calibration
• Digital display makes it easy to read

Includes

NIST-traceable calibration certificate with data.

90000-23 Traceable® Extreme-Accuracy Digital Thermometer with Calibration; 0.00 Celsius by Digi-Sense

Four Traceable International Standards Digital thermometers provide the exact readings required for critical requirements, quality control checks, and routine measurements. Units read 0.00, 25.00, 37.00, or a combination of all three with a resolution of 0.01° and an accuracy ±0.05°C within ±2°C of standard. Units read in °C and °F.

Impervious stainless-steel probe

Stainless-steel probe supplied with units shows the slightest temperature change. Probe is triple purpose for liquid, air/gas, and semisolids. Accurate readings with tip penetration of 1/3-inch. Probe has a diameter of 1/8-inch, stem length of 6-1/4 inches, overall length of 9 inches and a cable length of 5 feet.

Unit conforms to ITS-90, International Temperature Standard

Absolute high-precision thermometer is ideal for measuring temperatures in water baths, cuvets, gas systems, reagents, standards solutions, ovens, incubators, pharmaceuticals, petroleum products, foods, and wastewater.

Records time and date for MIN/MAX readings and hi/lo alarm alerts

Display shows minimum/maximum and current temperatures. MIN/MAX monitors readings overnight, on weekends, or for any time period and displays the exact time and date when the MIN/MAX temperature occurred. Alarm provides two visual (LEDs) and two audio alerts when temperature rises above or falls below high and low set points. Unit displays the exact time and date when dual thermometer alarms are triggered. Alarms are programmable in 0.1° increments. Visual and audible alarms signal continuously (for days) even if temperature returns to non-alarm range. First thermometer ever designed to permit user one-button calibration.

• Resolution is 0.01°
• Displays date and time of min/max temperature
• High and low settable alarms
• Traceable to NIST for accuracy

Includes

Stand, Velcro®, magnetic strips, and wall mount allow placing thermometer anywhere. Supplied with a Traceable® Certificate, stainless-steel probe, and two AA batteries for continuous, 1-year always-on monitoring.

37804-04 Traceable® High-Accuracy RTD Freezer Digital Thermometer with Calibration; SS Probe by Digi-Sense

Easily monitor temperature in liquids, baths, air/gas, incubators, refrigerators, or freezers. Keep track of temperature conditions overnight or for any time period-minimum and maximum temperatures are stored until the memory is cleared. The 4-wire platinum probe insures linear response and high accuracy across the entire range.

The built-in alarm provides an alert when temperature rises above or falls below a user defined set point, and is programmable in 1° increments. A visual and audible signal continues even if the temperature returns to non-alarm range until reset by the user.

Probe is attached to a 10-ft (3 m) micro-cable that permits a doors to close on it; probe and cable are both submersible. Mount meter with included Velcro® strips, wall-mount slots, or use flip-open stand on benchtop.

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

Model 37804-04 features a stainless steel probe with handle

• Get accurate, reliable measurements with included NIST-traceable calibration
• Temperature-buffered platinum RTD probe
• RTD probe insures linear response and high accuracy across the entire range
• Triple-display-shows high, low, and current temperature simultaneously

Includes

NIST-traceable calibration certificate with data, plastic stand, double back tape and Velcro® for attaching holder to any surface, stainless-steel probe(s), and two AA batteries

90000-75 Traceable® Indoor/Outdoor Digital Thermometer with Giant Dual-Display and Calibration by Digi-Sense

Thermometer includes a weatherproof remote sensor to measure remote and ambient temperatures at the same time. Dual display shows both indoor and outdoor temperature readings at the same time. Sits on desktop or can be wall mounted.

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

• Get accurate, reliable measurements with included NIST-traceable calibration
• F/°C selectable

Includes

Probe, one AAA battery, and NIST-traceable calibration certificate with data.

90000-37 Traceable® Big-Digit 4-Alarm Digital Thermometer with Calibration; Celsius by Digi-Sense

This thermometer has two temperature sensors-a built-in air sensor and an independent external probe sensor with 3 1/2 foot cable. The external probe can be used to monitor temperatures of liquids, air/gas, and semisolids.

Alarm configurations can be set up for four conditions: temperature above a setting, below a setting, between two settings, or outside two settings. A green or red light will blink and an audible alarm will sound when one of these conditions is detected. The alarm will sound every minute for 5 seconds until the temperature returns to a non-alarm condition or until the alarm is turned off.

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

• Get accurate, reliable measurements with included NIST-traceable calibration
• Jumbo digital display is easy to read from a distance
• Remote, heat-resistant probe

Includes

Mounting tape, probe suction cup, built-in flipopen bench stand, one AAA battery, and NIST-traceable calibration certificate with data.

36842-95 Traceable® Jumbo-Display Thermometer with Flat-Surface Probe and Calibration; ±1°C accuracy by Digi-Sense

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

Key Features

• Get accurate, reliable measurements with included NIST-traceable calibration
• Display updates every second
• Stainless steel piercing probe is perfect for measuring semisolids
• Flat-surface probe available
• °F/°C switchable
• ON/OFF switch to preserve battery life
• NSF approved
• Measures temperatures on surfaces such as grills or motors

Includes

NIST-Traceable calibration certificate with data and battery

37803-84 Traceable® Refrigerator/Freezer Digital Thermometer with Memory Card and Calibration by Digi-Sense

These thermometers record data onto a standard SD memory card instead of built-in memory - the advantage being that when the memory on the SD card is full, the SD card can be simply exchanged out for unlimited data storage. The data is provided in a text report that includes date, time of day, and readings of sensors, and may be sent to any spreadsheet or database.

The unique 4-line display simultaneously shows external probe temperature, ambient temperature, internal humidity, and time of day. An audible and visual alarm alerts you when temperature levels are higher or lower than the programmable set points. User-settable parameters include date, time, sampling time, temperature unit of measure, high/low alarm set points, and auto power off.

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

Comes with a sealed bottle sensor that is insulated from rapid temperature changes such as when a refrigerator door is opened.

• Get accurate, reliable measurements with included NIST-traceable calibration
• SD memory card can store up to 5.9 million readings
• Adjustable data logging sampling time settable from one second to 12 hours
• Maximum and minimum readings can be recalled or stored for later use

Includes

SD memory card, USB memory card reader, magnetic mounting strips, hook and loop mounting strips, bench stand, power adapter, three AA batteries, and NIST-traceable calibration certificate with data.

37803-85 Traceable® Digital Thermometer with Memory Card and Calibration, SS Probe by Digi-Sense

These thermometers record data onto a standard SD memory card instead of built-in memory - the advantage being that when the memory on the SD card is full, the SD card can be simply exchanged out for unlimited data storage. The data is provided in a text report that includes date, time of day, and readings of sensors, and may be sent to any spreadsheet or database.

The unique 4-line display simultaneously shows external probe temperature, ambient temperature, internal humidity, and time of day. An audible and visual alarm alerts you when temperature levels are higher or lower than the programmable set points. User-settable parameters include date, time, sampling time, temperature unit of measure, high/low alarm set points, and auto power off.

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

Comes with general-purpose stainless steel probe

• Get accurate, reliable measurements with included NIST-traceable calibration
• SD memory card can store up to 5.9 million readings
• Adjustable data logging sampling time settable from one second to 12 hours
• Maximum and minimum readings can be recalled or stored for later use

Includes

SD memory card, USB memory card reader, magnetic mounting strips, hook and loop mounting strips, bench stand, power adapter, three AA batteries, and NIST-traceable calibration certificate with data.

37803-87 Traceable® Remote Probe Digital Thermometer with Calibration; Extra Long, Waterproof by Digi-Sense

Extra-long probe, 20 inches (0.5 meter) created for deep vessels. Thermometer is ideal for placing in large beakers/flasks, vats, pails, and drums. Applications include foods, pharmaceuticals, industrial plants.

Waterproof (IP67) to a depth of 10 feet (3 meters) meter/probe/cable. Super large jumbo LCD can be read at 70 feet. Accurate readings with tip penetration of only 1 inch (2.5 cm). Stainless-steel spring-powered holder for ease in placing probe anywhere. Wall mount provides instant viewing, indoor/outdoor use.

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

• Get accurate, reliable measurements with included NIST-traceable calibration

Includes

Stainless-steel probe, stainless-steel spring-loaded holder, shaft collar, batteries, NIST-traceable calibration certificate with data.

37803-88 Traceable® High-Accuracy RTD Refrigerator/Freezer Digital Thermometer with Calibration by Digi-Sense

Easily monitor temperature in liquids, baths, air/gas, incubators, refrigerators, or freezers. Keep track of temperature conditions overnight or for any time period-minimum and maximum temperatures are stored until the memory is cleared. The 4-wire platinum probe insures linear response and high accuracy across the entire range.

The built-in alarm provides an alert when temperature rises above or falls below a user defined set point, and is programmable in 1° increments. A visual and audible signal continues even if the temperature returns to non-alarm range until reset by the user.

Probe is attached to a 10-ft (3 m) micro-cable that permits a doors to close on it; probe and cable are both submersible. Mount meter with included Velcro® strips, wall-mount slots, or use flip-open stand on benchtop.

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

Model 37803-88 is supplied with a special bottle probe specifically designed for refrigerator/freezer applications. The temperature sensor is enclosed in a bottle, which protects it from rapid temperature changes when refrigerator door is opened.

• Get accurate, reliable measurements with included NIST-traceable calibration
• Temperature-buffered platinum RTD probe
• RTD probe insures linear response and high accuracy across the entire range
• Triple-display-shows high, low, and current temperature simultaneously

Includes

NIST-traceable calibration certificate with data, plastic stand, double back tape and Velcro® for attaching holder to any surface, stainless-steel probe(s), and two AA batteries

37804-05 Traceable® High-Accuracy RTD Digital Thermometer with Calibration; Bullet Probe by Digi-Sense

Easily monitor temperature in liquids, baths, air/gas, incubators, refrigerators, or freezers. Keep track of temperature conditions overnight or for any time period-minimum and maximum temperatures are stored until the memory is cleared. The 4-wire platinum probe insures linear response and high accuracy across the entire range.

The built-in alarm provides an alert when temperature rises above or falls below a user defined set point, and is programmable in 1° increments. A visual and audible signal continues even if the temperature returns to non-alarm range until reset by the user.

Probe is attached to a 10-ft (3 m) micro-cable that permits a doors to close on it; probe and cable are both submersible. Mount meter with included Velcro® strips, wall-mount slots, or use flip-open stand on benchtop.

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

Model 37804-05 has a wire probes with staunless steel bullet sytle end and is designed for general-purpose applications.

• Get accurate, reliable measurements with included NIST-traceable calibration
• Temperature-buffered platinum RTD probe
• RTD probe insures linear response and high accuracy across the entire range
• Triple-display-shows high, low, and current temperature simultaneously

Includes

NIST-traceable calibration certificate with data, plastic stand, double back tape and Velcro® for attaching holder to any surface, stainless-steel probe(s), and two AA batteries

90000-29 Traceable® Extreme-Accuracy Digital Thermometer with Calibration; 0.00/25.00/37.00C by Digi-Sense

Four Traceable International Standards Digital thermometers provide the exact readings required for critical requirements, quality control checks, and routine measurements. Units read 0.00, 25.00, 37.00, or a combination of all three with a resolution of 0.01° and an accuracy ±0.05°C within ±2°C of standard. Units read in °C and °F.

Impervious stainless-steel probe

Stainless-steel probe supplied with units shows the slightest temperature change. Probe is triple purpose for liquid, air/gas, and semisolids. Accurate readings with tip penetration of 1/3-inch. Probe has a diameter of 1/8-inch, stem length of 6-1/4 inches, overall length of 9 inches and a cable length of 5 feet.

Unit conforms to ITS-90, International Temperature Standard

Absolute high-precision thermometer is ideal for measuring temperatures in water baths, cuvets, gas systems, reagents, standards solutions, ovens, incubators, pharmaceuticals, petroleum products, foods, and wastewater.

Records time and date for MIN/MAX readings and hi/lo alarm alerts

Display shows minimum/maximum and current temperatures. MIN/MAX monitors readings overnight, on weekends, or for any time period and displays the exact time and date when the MIN/MAX temperature occurred. Alarm provides two visual (LEDs) and two audio alerts when temperature rises above or falls below high and low set points. Unit displays the exact time and date when dual thermometer alarms are triggered. Alarms are programmable in 0.1° increments. Visual and audible alarms signal continuously (for days) even if temperature returns to non-alarm range. First thermometer ever designed to permit user one-button calibration.

• Resolution is 0.01°
• Displays date and time of min/max temperature
• High and low settable alarms
• Traceable to NIST for accuracy

Includes

Stand, Velcro®, magnetic strips, and wall mount allow placing thermometer anywhere. Supplied with a Traceable® Certificate, stainless-steel probe, and two AA batteries for continuous, 1-year always-on monitoring.

90001-02 Pen-Style Digital Pocket Thermometer; -58-302F/-50-150C by Digi-Sense

Thermometer has °>F/°>C switchable ranges and a one-second display update. Press data hold button to freeze readings. Use ON/OFF button to conserve battery life.

• Stainless steel penetrating probe holds up for years of use
• Rugged ABS plastic housing keeps display safe

Includes

Battery and stem cover.

90002-02 Traceable® Time and Date Digital Thermometer with Calibration; Bottle Probe by Digi-Sense

Ideal for monitoring temperature in the lab, home or office. Thermometer includes a remote probe with 6-ft (1.8m) cable to measure outdoor temperature and an internal sensor to measure indoor temperature. Display can be changed to show probe or ambient temperature, time of day, and month/day.

Thermometer can also display the exact time and date when the minimum and maximum temperature occurred. The temperature sensor performs accurately in most environments even including under water. Use rear stand to place unit on table or attach to wall via Velcro® strip or the two rear-mounted screw holes.

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

Model 90002-02 is supplied with special bottle probe specifically designed for refrigerator/freezer applications. The temperature sensor is enclosed in a bottle which protects it from rapid temperature changes when refrigerator door is opened.

• Get accurate, reliable measurements with included NIST-traceable calibration
• Simultaneously displays temperatures and time
• Wire mounting bracket permits easy probe placement

Includes

NIST-traceable calibration certificate with data and one AAA alkaline battery

90080-01 Traceable® See-Through Refrigerator Thermometer with Calibration; ±1°C accuracy by Digi-Sense

Inexpensive refrigerator thermometers are also ideal for monitoring temperatures in storerooms, labs, offices, hoods, and cabinets. Use the suction cup on the back of the thermometer, or included Velcro® strips, to locate it close to materials being observed inside a refrigerator or on other surfaces.

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

• Get accurate, reliable measurements with included NIST-traceable calibration
• Large 1/2"H digits update every 30 seconds
• °F/°C selectable

Includes

Suction cup, one Velcro strip, battery, and NIST-traceable calibration certificate with data.

90080-10 Traceable® Big-Digit See-Thru Digital Thermometer with Calibration; Fahrenheit by Digi-Sense

Attractive transparent body with large 1.2" digits LCD easily attaches to a window or piece of glass. Used to continually monitor temperature in storerooms, control rooms, fume hoods, laboratories, cleanrooms, refrigerators, plant areas, or just about anywhere else. It may also be attached to the outside of a window to view outdoor temperatures. Simultaneously displays current temperature and daily min/max readings. The thermometer automatically clears and updates the min/max reading daily.

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

• Get accurate, reliable measurements with included NIST-traceable calibration

Includes

NIST-traceable calibration certificate with data, mounting tape, hook and loop strips, and one AAA battery

90080-11 Traceable® Big-Digit See-Thru Digital Thermometer with Calibration; Celsius by Digi-Sense

Attractive transparent body with large 1.2" digits LCD easily attaches to a window or piece of glass. Used to continually monitor temperature in storerooms, control rooms, fume hoods, laboratories, cleanrooms, refrigerators, plant areas, or just about anywhere else. It may also be attached to the outside of a window to view outdoor temperatures. Simultaneously displays current temperature and daily min/max readings. The thermometer automatically clears and updates the min/max reading daily.

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

• Get accurate, reliable measurements with included NIST-traceable calibration

Includes

NIST-traceable calibration certificate with data, mounting tape, hook and loop strips, and one AAA battery

90205-00 Long-Stem Digital Pocket Thermometer, 8" L, -58 to 302F/-50 to 150C by Digi-Sense

These thermometers are ideal for laboratory, field, and process measurements. Use to quickly verify termperature. Typical response time is 30 seconds for 99% of new reading. Thermometers have a 304 stainless steel penetration stem. All models include a protective case with pocket clip and a battery. Thermometer features a sealed case-ideal for use with liquids. It has °>F/°>C switchable ranges, a MIN/MAX button, and a one-second display update. Use ON/OFF button to conserve battery life.

Stainless Steel Stem, °F/°C switchable ranges, one-second display update in Celsius scale, and ten-second display update in Fahrenheit scale. Use ON/OFF button to conserve battery life.

90205-01 Traceable® Pen-Style Digital Thermometer with Calibration, High-Accuracy; 8" L, 302 F by Digi-Sense

NIST-traceable precalibration means you get reliable measurements right out of the box, saving you time and money! Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

Perfect-sized unit fits into flasks, cuvets, test tubes, and beakers. Read temperatures in foods, gases, samples, reagents, water baths, and semisolids. Stainless-steel probe is resistant to most laboratory chemicals. Long stem allows user to make measurements while stirring solutions in deep vessels. Almost unbreakable plastic and stainless-steel construction (no glass or mercury) makes it safe. Brilliant LCD is 1/4-inch-high. Designed for all ovens and incubators.

• Get accurate, reliable measurements with included NIST-traceable calibration

Includes

NIST-traceable calibration certificate with data.

90205-02 Traceable® Pen-Style Digital Thermometer with Calibration, High-Accuracy; 11.5" L, 302F by Digi-Sense

NIST-traceable precalibration means you get reliable measurements right out of the box, saving you time and money! Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

Perfect-sized unit fits into flasks, cuvets, test tubes, and beakers. Read temperatures in foods, gases, samples, reagents, water baths, and semisolids. Stainless-steel probe is resistant to most laboratory chemicals. Long stem allows user to make measurements while stirring solutions in deep vessels. Almost unbreakable plastic and stainless-steel construction (no glass or mercury) makes it safe. Brilliant LCD is 1/4-inch-high. Designed for all ovens and incubators.

• Get accurate, reliable measurements with included NIST-traceable calibration

Includes

NIST-traceable calibration certificate with data.

90205-03 Traceable® Digital Pocket Thermometer with Calibration; ±1°C accuracy by Digi-Sense

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

• Get accurate, reliable measurements with included NIST-traceable calibration
• Wide temperature range from -58 to 572°F (-50 to 300°C)
• Large, bright LCD with 3/8"H digits
• 4-3/4"L x 0.19" dia stainless steel stem fits nicely into included protective sleeve

Includes

Protective case with clip, battery, and NIST-traceable calibration certificate with data.

90205-04 Traceable® T-Bar Waterproof Food Thermometer with Calibration; ±1°C accuracy (-20 to 100°C) by Digi-Sense

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

• Get accurate, reliable measurements with included NIST-traceable calibration
• Waterproof (IP67 rating)-ideal for food and beverage applications and in washdown areas
• Rugged, shockproof and drop tested to withstand a fall of 5 feet (1.5 meters)
• °F/°C switchable

Includes

Battery and NIST-traceable calibration certificate with data.