$150 - $200, Digital Thermometers, Digi-Sense

37803-87 Traceable® Remote Probe Digital Thermometer with Calibration; Extra Long, Waterproof by Digi-Sense

Extra-long probe, 20 inches (0.5 meter) created for deep vessels. Thermometer is ideal for placing in large beakers/flasks, vats, pails, and drums. Applications include foods, pharmaceuticals, industrial plants.

Waterproof (IP67) to a depth of 10 feet (3 meters) meter/probe/cable. Super large jumbo LCD can be read at 70 feet. Accurate readings with tip penetration of only 1 inch (2.5 cm). Stainless-steel spring-powered holder for ease in placing probe anywhere. Wall mount provides instant viewing, indoor/outdoor use.

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

• Get accurate, reliable measurements with included NIST-traceable calibration

Includes

Stainless-steel probe, stainless-steel spring-loaded holder, shaft collar, batteries, NIST-traceable calibration certificate with data.

37804-04 Traceable® High-Accuracy RTD Freezer Digital Thermometer with Calibration; SS Probe by Digi-Sense

Easily monitor temperature in liquids, baths, air/gas, incubators, refrigerators, or freezers. Keep track of temperature conditions overnight or for any time period-minimum and maximum temperatures are stored until the memory is cleared. The 4-wire platinum probe insures linear response and high accuracy across the entire range.

The built-in alarm provides an alert when temperature rises above or falls below a user defined set point, and is programmable in 1° increments. A visual and audible signal continues even if the temperature returns to non-alarm range until reset by the user.

Probe is attached to a 10-ft (3 m) micro-cable that permits a doors to close on it; probe and cable are both submersible. Mount meter with included Velcro® strips, wall-mount slots, or use flip-open stand on benchtop.

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

Model 37804-04 features a stainless steel probe with handle

• Get accurate, reliable measurements with included NIST-traceable calibration
• Temperature-buffered platinum RTD probe
• RTD probe insures linear response and high accuracy across the entire range
• Triple-display-shows high, low, and current temperature simultaneously

Includes

NIST-traceable calibration certificate with data, plastic stand, double back tape and Velcro® for attaching holder to any surface, stainless-steel probe(s), and two AA batteries

37804-05 Traceable® High-Accuracy RTD Digital Thermometer with Calibration; Bullet Probe by Digi-Sense

Easily monitor temperature in liquids, baths, air/gas, incubators, refrigerators, or freezers. Keep track of temperature conditions overnight or for any time period-minimum and maximum temperatures are stored until the memory is cleared. The 4-wire platinum probe insures linear response and high accuracy across the entire range.

The built-in alarm provides an alert when temperature rises above or falls below a user defined set point, and is programmable in 1° increments. A visual and audible signal continues even if the temperature returns to non-alarm range until reset by the user.

Probe is attached to a 10-ft (3 m) micro-cable that permits a doors to close on it; probe and cable are both submersible. Mount meter with included Velcro® strips, wall-mount slots, or use flip-open stand on benchtop.

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

Model 37804-05 has a wire probes with staunless steel bullet sytle end and is designed for general-purpose applications.

• Get accurate, reliable measurements with included NIST-traceable calibration
• Temperature-buffered platinum RTD probe
• RTD probe insures linear response and high accuracy across the entire range
• Triple-display-shows high, low, and current temperature simultaneously

Includes

NIST-traceable calibration certificate with data, plastic stand, double back tape and Velcro® for attaching holder to any surface, stainless-steel probe(s), and two AA batteries

94460-07 Traceable® Excursion-Trac™ Data Logging Thermometer with Calibration; 1 Bottle Probe by Digi-Sense

Easily monitor temperatures overnight or for any time period minimum and maximum temperatures are stored until the memory is cleared. Set high and low alarms in 1° increments; alarm sounds when temperature rises above or falls below set points. The alarm tracking feature stores data for up to 10 different alarm events detailing when the alarm state occurred, as well as when the unit returned within range. Alarm state indicator includes visual LEDs, audio alerts, and flashing LCD segments.

Transfer data recorded in a CSV format to any computer via a USB flash drive no software is required. Simply clear memory after downloading data to USB drive. Unit continues to record new data while downloading old data. Other status indicators include low-battery, memory full, USB data transfer, and active alarm state. All probes are attached to a 10-ft (3-m) microcable that permits a door to close on it.

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

Thermometer comes with a bottle probe filled with nontoxic glycol solution, eliminating the possibility of contamination from mercury. Solution is GRAS (generally recognized as safe) by the FDA. The solution filled bottle simulates the temperature of other stored liquids and eliminates the rapid temperature fluctuation caused by opening the refrigerator/freezer door.

Key Features

• Get accurate, reliable measurements with included NIST-traceable calibration
• Memory can be cleared after downloading data and alarm events
• Set limits for and store up to 10 unique alarm events
• Smart-Alarm™ with visual/audible alarm continues to alert even if conditions return to normal range
• Triple-display shows high, low, and current temperature simultaneously
• Temperature-buffered glycol bottle probe mimics solution

Includes

Glass bottle probe with 10-ft cable, flip-open stand, Velcro® strips, magnetic strips, wall-mount receptacle, batteries, and NIST-traceable calibration certificate with data.

94460-09 Traceable® Excursion-Trac™ Data Logging Thermometer with Calibration; 2 Bottle Probes by Digi-Sense

Easily monitor temperatures overnight or for any time period minimum and maximum temperatures are stored until the memory is cleared. Set high and low alarms in 1° increments; alarm sounds when temperature rises above or falls below set points. The alarm tracking feature stores data for up to 10 different alarm events detailing when the alarm state occurred, as well as when the unit returned within range. Alarm state indicator includes visual LEDs, audio alerts, and flashing LCD segments.

Transfer data recorded in a CSV format to any computer via a USB flash drive no software is required. Simply clear memory after downloading data to USB drive. Unit continues to record new data while downloading old data. Other status indicators include low-battery, memory full, USB data transfer, and active alarm state. All probes are attached to a 10-ft (3-m) microcable that permits a door to close on it.

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

Thermometer comes with bottle probes filled with nontoxic glycol solution, eliminating the possibility of contamination from mercury. Solution is GRAS (generally recognized as safe) by the FDA. The solution filled bottle simulates the temperature of other stored liquids and eliminates the rapid temperature fluctuation caused by opening the refrigerator/freezer door.

Key Features

• Get accurate, reliable measurements with included NIST-traceable calibration
• Memory can be cleared after downloading data and alarm events
• Set limits for and store up to 10 unique alarm events
• Smart-Alarm™ with visual/audible alarm continues to alert even if conditions return to normal range
• Triple-display shows high, low, and current temperature simultaneously
• Temperature-buffered glycol bottle probe mimics solution

Includes

Glass bottle probes with 10-ft cable, flip-open stand, Velcro® strips, magnetic strips, wall-mount receptacle, batteries, and NIST-traceable calibration certificate with data.

94460-11 Traceable® Excursion-Trac™ Data Logging Thermometer with Calibration; 1 Bullet™ Probe by Digi-Sense

Easily monitor temperatures overnight or for any time period minimum and maximum temperatures are stored until the memory is cleared. Set high and low alarms in 1° increments; alarm sounds when temperature rises above or falls below set points. The alarm tracking feature stores data for up to 10 different alarm events detailing when the alarm state occurred, as well as when the unit returned within range. Alarm state indicator includes visual LEDs, audio alerts, and flashing LCD segments.

Transfer data recorded in a CSV format to any computer via a USB flash drive no software is required. Simply clear memory after downloading data to USB drive. Unit continues to record new data while downloading old data. Other status indicators include low-battery, memory full, USB data transfer, and active alarm state. All probes are attached to a 10-ft (3-m) microcable that permits a door to close on it.

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

Use included Bullet probe to measure air and liquid temperatures. Sensor measures 3/4"L x 0.187" dia.

Key Features

• Get accurate, reliable measurements with included NIST-traceable calibration
• Memory can be cleared after downloading data and alarm events
• Set limits for and store up to 10 unique alarm events
• Smart-Alarm™ with visual/audible alarm continues to alert even if conditions return to normal range
• Triple-display shows high, low, and current temperature simultaneously
• Probe and cable are submersible

Includes

Bullet probe with 10-ft cable, flip-open stand, Velcro® strips, magnetic strips, wall-mount receptacle, batteries, and NIST-traceable calibration certificate with data.

94460-17 Traceable® Excursion-Trac™ Data Logging Thermometer with Calibration; 2 SS Probes by Digi-Sense

Easily monitor temperatures overnight or for any time period minimum and maximum temperatures are stored until the memory is cleared. Set high and low alarms in 1° increments; alarm sounds when temperature rises above or falls below set points. The alarm tracking feature stores data for up to 10 different alarm events detailing when the alarm state occurred, as well as when the unit returned within range. Alarm state indicator includes visual LEDs, audio alerts, and flashing LCD segments.

Transfer data recorded in a CSV format to any computer via a USB flash drive no software is required. Simply clear memory after downloading data to USB drive. Unit continues to record new data while downloading old data. Other status indicators include low-battery, memory full, USB data transfer, and active alarm state. All probes are attached to a 10-ft (3-m) microcable that permits a door to close on it.

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

Durable stainless steel probes withstand both low and high temperatures and are ideal for measuring temperatures of air, liquids, and semi-solids. Sensor stem measures 6.25"L x 1/8" dia.

Key Features

• Get accurate, reliable measurements with included NIST-traceable calibration
• Memory can be cleared after downloading data and alarm events
• Set limits for and store up to 10 unique alarm events
• Smart-Alarm™ with visual/audible alarm continues to alert even if conditions return to normal range
• Triple-display shows high, low, and current temperature simultaneously
• Measure air/gas, liquids, or semisolids

Includes

Stainless steel probes with 10-ft cable, flip-open stand, Velcro® strips, magnetic strips, wall-mount receptacle, batteries, and NIST-traceable calibration certificate with data.

94460-37 Traceable® Memory-Loc™ Datalogging Thermometer with Calibration; 1 Bottle Probe by Digi-Sense

Easily monitor temperatures overnight or for any time period stores over 1 million temperature observations. Datalogger will stop recording when storage is full and will not overwrite recorded data. Memory can be cleared after downloading data and alarm events. Set high and low alarms in 1° increments; alarm sounds when temperature rises above or falls below set points. The alarm tracking feature stores data for up to 10 different alarm events detailing when the alarm state occurred, as well as when the unit returned within range. Alarm state indicator include audio alerts and flashing LCD segments.

Transfer data recorded in a CSV format to any computer via a USB flash drive no software is required. Unit continues to record data while downloading data. Sampling rate is 5 sec (10 sec for models 98768-55, -56, -59, and -60). Select logging interval ranging from 1 min to 24 hours. Other status indicators include low-battery, memory full, USB data transfer, and active alarm state. Probe is attached to a 10-ft (3 m) microcable that permits a door to close on it. Mount meter with included Velcro™ strips, wall-mount slots, or use flip-open stand on benchtop.

Select from glycol-filled glass, or vaccine bottle probe(s), standard plastic Bullet™ probe(s), or stainless steel probe(s). Bottle probes contain nontoxic glycol solution which is considered GRAS (generally recognized as safe) by the FDA. The solution filled bottle simulates the temperature of other stored liquids and eliminates the rapid temperature fluctuation caused by opening the refrigerator/freezer door. Vaccine bottles are designed to fit vaccine trays. Use standard Bullet probe to measure air and liquid temperatures. Bullet probe sensor and cable may be completely immersed; sensor measures 3/4"L x 0.187" dia (19 x 4.75 mm). Durable stainless steel probes measure 6-1/4"L x 0.125" dia (159 x 3.18 mm) and withstand both low and high temperatures ideal for measuring temperatures of air, liquids, and semi-solids.

Thermometer comes with a bottle probe filled with nontoxic glycol, eliminating the possibility of contamination from mercury. Solution is GRAS (generally recognized as safe) by the FDA.

Key Features

• Get accurate, reliable measurements with included NIST-traceable calibration
• Store up to 10 unique alarm events, memory can be cleared after downloading data
• Smart-Alarm™ with visual/audible alarm continues to alert even if the unit returns to nonalarm conditions
• Triple-display shows high, low, and current temperature simultaneously
• Temperature-buffered glycol bottle probe mimics solution

Includes

NIST-Traceable calibration certificate with data, bottle probe with 10-ft cable, magnetic strips, Velcro® strips, flip-open stand, and batteries.

94460-39 Traceable® Memory-Loc™ Datalogging Thermometer with Calibration; 2 Bottle Probes by Digi-Sense

Easily monitor temperatures overnight or for any time period stores over 1 million temperature observations. Datalogger will stop recording when storage is full and will not overwrite recorded data. Memory can be cleared after downloading data and alarm events. Set high and low alarms in 1° increments; alarm sounds when temperature rises above or falls below set points. The alarm tracking feature stores data for up to 10 different alarm events detailing when the alarm state occurred, as well as when the unit returned within range. Alarm state indicator include audio alerts and flashing LCD segments.

Transfer data recorded in a CSV format to any computer via a USB flash drive no software is required. Unit continues to record data while downloading data. Sampling rate is 5 sec (10 sec for models 98768-55, -56, -59, and -60). Select logging interval ranging from 1 min to 24 hours. Other status indicators include low-battery, memory full, USB data transfer, and active alarm state. Probe is attached to a 10-ft (3 m) microcable that permits a door to close on it. Mount meter with included Velcro™ strips, wall-mount slots, or use flip-open stand on benchtop.

Select from glycol-filled glass, or vaccine bottle probe(s), standard plastic Bullet™ probe(s), or stainless steel probe(s). Bottle probes contain nontoxic glycol solution which is considered GRAS (generally recognized as safe) by the FDA. The solution filled bottle simulates the temperature of other stored liquids and eliminates the rapid temperature fluctuation caused by opening the refrigerator/freezer door. Vaccine bottles are designed to fit vaccine trays. Use standard Bullet probe to measure air and liquid temperatures. Bullet probe sensor and cable may be completely immersed; sensor measures 3/4"L x 0.187" dia (19 x 4.75 mm). Durable stainless steel probes measure 6-1/4"L x 0.125" dia (159 x 3.18 mm) and withstand both low and high temperatures ideal for measuring temperatures of air, liquids, and semi-solids.

Thermometer comes with bottle probes filled with nontoxic glycol, eliminating the possibility of contamination from mercury. Solution is GRAS (generally recognized as safe) by the FDA.

Key Features

• Get accurate, reliable measurements with included NIST-traceable calibration
• Store up to 10 unique alarm events, memory can be cleared after downloading data
• Smart-Alarm™ with visual/audible alarm continues to alert even if the unit returns to nonalarm conditions
• Triple-display shows high, low, and current temperature simultaneously
• Temperature-buffered glycol bottle probe mimics solution

Includes

NIST-Traceable calibration certificate with data, bottle probes with 10-ft cable, magnetic strips, Velcro® strips, flip-open stand, and batteries.