Digi-Sense

01019-11 Traceable® SpatulaBalance™ with Calibration; 300g x 0.1g by Digi-Sense

Balance with digital display is located right in the easy-grip handle. Spatula Balance transfers and weighs crystals, granulated materials, solids, liquids, precipitates, and chemicals. Markings on see-through scoop are graduated from 5 to 30 mL in 5-mL increments for weighing liquids with ease.

Chemical- and corrosion-resistant ABS plastic construction allows transferring materials without sticking. Scoop detaches from balance for effortless dishwasher-safe cleaning. LCD indicates low-battery condition.

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

Features:

• Get accurate, reliable measurements with included NIST-traceable calibration
• Scoop design eliminates spilling
• Three-position soft-touch keys in the handle tares (sets to zero), holds (freezes the display), and changes grams/ounces
• Lightweight - only 3 oz

Includes:

Two AAA batteries and NIST-traceable calibration certificate with data.

WD-36225-91 104A PL312 Variable- Time Output Controller 1440 Watts, 120 V 50/60 Hz by Digi-Sense

This timed control turns the output load on and off and then repeats the cycle. Each position on the knob from LO to HI represents a specific cycle time where the on time ranges from 6 to 100 percent. For example the LO setting represents a total cycle of 60 seconds with an on time of 4 seconds. This type of control can be used to regulate the temperature of resistive loads. The pilot light on the front will glow when the load is on.

• Manually set power control dial from 5 to 100% to control the output wattage

Includes

Model 36225-91 has a 6-ft cord with U.S. plug; model 36225-92 has a 4-ft cord without plug.

WD-91428-05 Temp14 Single-Input Thermistor Thermometer by Digi-Sense

This robust and reliable meter work in any environment from the lab to the production floor. The sturdy armored construction protects against knocks and jars. All models are ergonomically designed for both large and small hands alike. The sealed keypad and ABS case meet IP54 standards for splash resistance.

Features include a large easy-to-read illuminated display, an easy-to-use five-button control panel, Min/Max, Hold, °F/°C switchable, auto shutoff, and low battery indicator. Each thermometer is individually factory calibrated. Automatic field calibration is easily performed. Simply place the probe in a container packed with ice, fill with water, then press the "CAL" button meter automatically recognizes the freezing point.

Digi-Sense s exclusive "3-WAY HANDS-FREE" capability allows "hands-free" operation use the built-in stand on a table top, attach the meter to metal objects through magnets inserted into the armor boot, or hang from a pipe or belt using the hook-and-loop strap. Meter comes standard with the integral stand; the "hands-free" option adds magnets and strap (order separately).

Includes

Protective rubber armor/boot with stand and three AA batteries.

Key Features

• 3-way hands-free operation available
• Large easy-to-read screen with back light
• Rugged armor with built-in stand withstand the toughest conditions
• Easy-to-use automatic field calibration ensures accurate readings
• Probes are sold separately

00708-00 Calibrated Liquid-In-Glass Thermometer; -100 to 50C, 76mm Immersion, Organic Liquid Fill by Digi-Sense

These thermometers are ideal for use in applications where a very precise accurate temperature measurement is required. Thermometers are individually calibrated to NIST standards at specific temperatures and supplied with an NIST report of calibration stating corrections to one-tenth the smallest division.

Thermometers feature triangular anti-roll fitting, permanently fused markings, blue spirit liquid, white background glass; are also individually serial numbered. Include an NIST-traceable statement of accuracy and a triangular-style antiroll fitting.

• Non-mercury blue spirit liquid
• NIST-certified detailed, laminated report of calibration included

Includes:

Thermometers are individually calibrated to NIST standards at specific temperatures and come with a NIST-traceable calibration report supplied by the manufacturer stating corrections to one-tenth the smallest division.

00708-01 Calibrated Liquid-In-Glass Thermometer; -20 to 110C, 76mm Immersion, Organic Liquid Fill by Digi-Sense

These thermometers are ideal for use in applications where a very precise accurate temperature measurement is required. Thermometers are individually calibrated to NIST standards at specific temperatures and supplied with an NIST report of calibration stating corrections to one-tenth the smallest division.

Thermometers feature triangular anti-roll fitting, permanently fused markings, blue spirit liquid, white background glass; are also individually serial numbered. Include an NIST-traceable statement of accuracy and a triangular-style antiroll fitting.

• Non-mercury blue spirit liquid
• NIST-certified detailed, laminated report of calibration included

Includes:

Thermometers are individually calibrated to NIST standards at specific temperatures and come with a NIST-traceable calibration report supplied by the manufacturer stating corrections to one-tenth the smallest division.

00708-02 Calibrated Liquid-In-Glass Thermometer; -20 to 150C, 76mm Immersion, Organic Liquid Fill by Digi-Sense

These thermometers are ideal for use in applications where a very precise accurate temperature measurement is required. Thermometers are individually calibrated to NIST standards at specific temperatures and supplied with an NIST report of calibration stating corrections to one-tenth the smallest division.

Thermometers feature triangular anti-roll fitting, permanently fused markings, blue spirit liquid, white background glass; are also individually serial numbered. Include an NIST-traceable statement of accuracy and a triangular-style antiroll fitting.

• Non-mercury blue spirit liquid
• NIST-certified detailed, laminated report of calibration included

Includes:

Thermometers are individually calibrated to NIST standards at specific temperatures and come with a NIST-traceable calibration report supplied by the manufacturer stating corrections to one-tenth the smallest division.

00708-04 Calibrated Liquid-In-Glass Thermometer; 1 to 61C, 76mm Immersion, Organic Liquid Fill by Digi-Sense

These thermometers are ideal for use in applications where a very precise accurate temperature measurement is required. Thermometers are individually calibrated to NIST standards at specific temperatures and supplied with an NIST report of calibration stating corrections to one-tenth the smallest division.

Thermometers feature triangular anti-roll fitting, permanently fused markings, blue spirit liquid, white background glass; are also individually serial numbered. Include an NIST-traceable statement of accuracy and a triangular-style antiroll fitting.

• Non-mercury blue spirit liquid
• NIST-certified detailed, laminated report of calibration included

Includes

Thermometers are individually calibrated to NIST standards at specific temperatures and come with a NIST-traceable calibration report supplied by the manufacturer stating corrections to one-tenth the smallest division.

00708-05 Calibrated Liquid-In-Glass Thermometer; -20 to 110C, Total Immersion, Organic Liquid Fill by Digi-Sense

These thermometers are ideal for use in applications where a very precise accurate temperature measurement is required. Thermometers are individually calibrated to NIST standards at specific temperatures and supplied with an NIST report of calibration stating corrections to one-tenth the smallest division.

Thermometers feature triangular anti-roll fitting, permanently fused markings, blue spirit liquid, white background glass; are also individually serial numbered. Include an NIST-traceable statement of accuracy and a triangular-style antiroll fitting.

• Non-mercury blue spirit liquid
• NIST-certified detailed, laminated report of calibration included

Includes

Thermometers are individually calibrated to NIST standards at specific temperatures and come with a NIST-traceable calibration report supplied by the manufacturer stating corrections to one-tenth the smallest division.

00708-06 Calibrated Liquid-In-Glass Thermometer; -20 to 150C, Total Immersion, Organic Liquid Fill by Digi-Sense

These thermometers are ideal for use in applications where a very precise accurate temperature measurement is required. Thermometers are individually calibrated to NIST standards at specific temperatures and supplied with an NIST report of calibration stating corrections to one-tenth the smallest division.

Thermometers feature triangular anti-roll fitting, permanently fused markings, blue spirit liquid, white background glass; are also individually serial numbered. Include an NIST-traceable statement of accuracy and a triangular-style antiroll fitting.

• Non-mercury blue spirit liquid
• NIST-certified detailed, laminated report of calibration included

Includes

Thermometers are individually calibrated to NIST standards at specific temperatures and come with a NIST-traceable calibration report supplied by the manufacturer stating corrections to one-tenth the smallest division.

00708-07 Calibrated Liquid-In-Glass Thermometer; -10 to 225C, Total Immersion, Organic Liquid Fill by Digi-Sense

These thermometers are ideal for use in applications where a very precise accurate temperature measurement is required. Thermometers are individually calibrated to NIST standards at specific temperatures and supplied with an NIST report of calibration stating corrections to one-tenth the smallest division.

Thermometers feature triangular anti-roll fitting, permanently fused markings, blue spirit liquid, white background glass; are also individually serial numbered. Include an NIST-traceable statement of accuracy and a triangular-style antiroll fitting.

• Non-mercury blue spirit liquid
• NIST-certified detailed, laminated report of calibration included

Includes

Thermometers are individually calibrated to NIST standards at specific temperatures and come with a NIST-traceable calibration report supplied by the manufacturer stating corrections to one-tenth the smallest division.

00708-08 Calibrated Liquid-In-Glass Thermometer; -1 to 101C, Total Immersion, Organic Liquid Fill by Digi-Sense

These thermometers are ideal for use in applications where a very precise accurate temperature measurement is required. Thermometers are individually calibrated to NIST standards at specific temperatures and supplied with an NIST report of calibration stating corrections to one-tenth the smallest division.

Thermometers feature triangular anti-roll fitting, permanently fused markings, blue spirit liquid, white background glass; are also individually serial numbered. Include an NIST-traceable statement of accuracy and a triangular-style antiroll fitting.

• Non-mercury blue spirit liquid
• NIST-certified detailed, laminated report of calibration included

Includes

Thermometers are individually calibrated to NIST standards at specific temperatures and come with a NIST-traceable calibration report supplied by the manufacturer stating corrections to one-tenth the smallest division.

03311-02 Mason Hygrometer with 2 Spirit-Filled Glass Thermometers by Digi-Sense

Mason hygrometer features two red spirit filled thermometers contained within a sturdy plastic case. Included chart converts wet and dry bulb temperatures to humidity values. Dual temperature scales range from 0 to 120°F (-15 to 50°C).

03313-06 Traceable® Humidity Card with Calibration; 6/Pk by Digi-Sense

Easy-to-read card is ideal for use with bottles, chemicals, plastic bags, electronics, dessicators, and storage containers. Maximum range (highest humidity attained when exposed for 24 hours or more) is 50 to 90% RH - orange dot indicator changes to yellow in increments of 10% RH. Maximum memory range is readable to an accuracy of ±5% RH at 75°F (24°C).

Reversible current humidity (0 to 100% RH) changes color from blue to bright pink in increments of 10% RH; accuracy of ±2.5% RH at 75°F (24°C). Card arrives ready for use - each card is individually sealed in a clear moisture-barrier bag with dessicant to keep the card dry and provide for an extended shelf life.

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

Features

• Get accurate, reliable measurements with included NIST-traceable calibration

Includes

NIST-traceable calibration certificate with data.

03313-65 Traceable Universal Thermohygrometer with Calibration, 10 to 95% RH, -40 to 220°F by Digi-Sense

Thermohygrometers accurately measure humidity and temperature, and calculate dew point. Program high/low audible/visual alarms for temperature, humidity, and dew point. Choose from two models: universal or fast-response.

Traceable® Products have an individually-numbered Traceable® Certificate provided with each unit, that assures accuracy from our ISO/IEC 17025:2005(1750.01) calibration laboratory accredited by A2LA. It indicates traceability of measurements to the SI units through NIST or other recognized national measurement institutes (NMI) that are signatories to the CIPM Mutual Recognition Agreement. Each product goes through an intense vetting process before it can carry the Traceable name, thus saving you both time and money by not having to calibrate separately.

• Includes NIST-Traceable certificate from our A2LA accredited (1750.01) calibration laboratory
• Audible alarm and flashing display actuate when high or low limits are exceeded

Includes

ABS plastic housing, probe with 4 1/2-ft cable, one 9 V battery, plastic carrying case and NIST-traceable calibration certificate with data.

03313-86 Traceable® Jumbo Display Thermohygrometer with Calibration by Digi-Sense

This thermohygrometer is perfect for both indoor and outdoor applications. Large, 1 1/8"' H display can be read as far as 35 feet away! Unit features ABS plastic housing. Wall-mount the thermohygrometer or use the flip-open stand.

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

Features

• Get accurate, reliable measurements with included NIST-traceable calibration

Includes

NIST-traceable calibration certificate with data, submersible temperature sensor on a 10-ft cable and one AAA battery.

03313-88 Traceable Handheld General-Purpose Thermohygrometer with Calibration by Digi-Sense

The perfect quality-control unit that displays humidity and temperature quickly and accurately. The self-contained sensors are built into the case and are designed for use in harsh applications. Features a separate data hold switch so that readings may be captured and noted. The unit can be used up to 100 continuous hours or for 6 months of intermittent used on a one 9 volt battery.

Traceable® Products have an individually-numbered Traceable® Certificate provided with each unit, that assures accuracy from our ISO/IEC 17025:2005(1750.01) calibration laboratory accredited by A2LA. It indicates traceability of measurements to the SI units through NIST or other recognized national measurement institutes (NMI) that are signatories to the CIPM Mutual Recognition Agreement. Each product goes through an intense vetting process before it can carry the Traceable name, thus saving you both time and money by not having to calibrate separately.

• Includes NIST-Traceable certificate from our A2LA accredited (1750.01) calibration laboratory
• Humidity sensor is thin film capacitance
• Self-contained unit

Includes

Carrying case, NIST-traceable calibration certificate with data, and one 9-volt battery

06449-08 Traceable® Color Frame Four-Channel Timer with Calibration by Digi-Sense

Three bright, colorful frames permit personalization-or dedicate a certain frame for a certain timing task. Four independent timing channels feature unique audible alarms for simultaneous timing. Count up or down from 100 hours for longer duration experiments. Memory function returns the display to the programmed time.

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

Features:

• Get accurate, reliable measurements with included NIST-traceable calibration

Includes:

Three colorful faceplates/frames, built-in stand/pocket clip, magnetic back, two 1.5 V button cell batteries, and NIST-traceable calibration certificate with data.

08006-02 Galileo Thermometer; 64 to 80°F (18 to 26°C), 7 in. by Digi-Sense

Colorful glass thermometer is based on Galileo's theory developed over 400 years ago: in liquid, a body of fixed mass becomes less buoyant as the liquid temperature rises, and more buoyant as the temperature decreases - due to changes in liquid density. As temperature changes, the multi-colored balls rise and fall within the liquid-filled thermostatic tube. Lowest sphere in the top group within the instrument indicates ambient temperature.

• Hand-crafted thermometers
• Non-mercury liquid
• Five floating spheres provide both Fahrenheit and Celsius readings
• Seven inches tall

08006-03 Galileo Thermometer; 64 to 80°F (18 to 26°C), 11 in. by Digi-Sense

Colorful glass thermometer is based on Galileo's theory developed over 400 years ago: in liquid, a body of fixed mass becomes less buoyant as the liquid temperature rises, and more buoyant as the temperature decreases - due to changes in liquid density. As temperature changes, the multi-colored balls rise and fall within the liquid-filled thermostatic tube. Lowest sphere in the top group within the instrument indicates ambient temperature.

• Hand-crafted thermometers
• Non-mercury liquid
• Five floating spheres provide both Fahrenheit and Celsius readings
• Seven inches tall

08006-04 Galileo Thermometer; 64 to 80°F (18 to 26°C), 13 in. by Digi-Sense

Colorful glass thermometer is based on Galileo's theory developed over 400 years ago: in liquid, a body of fixed mass becomes less buoyant as the liquid temperature rises, and more buoyant as the temperature decreases - due to changes in liquid density. As temperature changes, the multi-colored balls rise and fall within the liquid-filled thermostatic tube. Lowest sphere in the top group within the instrument indicates ambient temperature.

• Hand-crafted thermometers
• Non-mercury liquid
• Five floating spheres provide both Fahrenheit and Celsius readings
• Thirteen inches tall

08006-05 Galileo Thermometer; 64 to 88°F (18 to 30°C), 17 in. by Digi-Sense

Colorful glass thermometer is based on Galileo's theory developed over 400 years ago: in liquid, a body of fixed mass becomes less buoyant as the liquid temperature rises, and more buoyant as the temperature decreases - due to changes in liquid density. As temperature changes, the multi-colored balls rise and fall within the liquid-filled thermostatic tube. Lowest sphere in the top group within the instrument indicates ambient temperature.

• Hand-crafted thermometers
• Non-mercury liquid
• Seven floating spheres provide both Fahrenheit and Celsius readings
• Seventeen inches tall

08006-09 Dry Block/Incubator Liquid-In-Glass Thermometer; 18 to 60C, PFA Safety Coated; 35mm Immersion, Organic Liquid Fill by Digi-Sense

These thermometers are designed for use in specific applications. These Durac thermometers feature markings that are permanently printed on the glass, individually serialized, and red spirit liquid that has a dark scale contrasts against a white background. Some thermometers are PFA coated for added safety which may cause a slight change in accuracy up to 1 division.

Incubator thermometers - designed with a swell in the glass to hold the thermometer in place.

• Non-mercury liquid

Warning: This product is not approved or intended for, and should not be used for medical, clinical, surgical or other patient oriented applications.

08006-12 Dry Block/Incubator Liquid-In-Glass Thermometer; 50 to 110C, PFA Safety Coated, 35mm Immersion, Organic Liquid Fill by Digi-Sense

These thermometers are designed for use in specific applications. These Durac thermometers feature markings that are permanently printed on the glass, individually serialized, and red spirit liquid that has a dark scale contrasts against a white background. Some thermometers are PFA coated for added safety which may cause a slight change in accuracy up to 1 division.

Incubator thermometers - designed with a swell in the glass to hold the thermometer in place.

• Non-mercury liquid

Warning: This product is not approved or intended for, and should not be used for medical, clinical, surgical or other patient oriented applications.

08006-14 Dry Block/Incubator Liquid-In-Glass Thermometer; -15 to 105C, PFA Safety Coated, Total Immersion, Organic Liquid Fill by Digi-Sense

These thermometers are designed for use in specific applications. These Durac thermometers feature markings that are permanently printed on the glass, individually serialized, and red spirit liquid that has a dark scale contrasts against a white background. Some thermometers are PFA coated for added safety which may cause a slight change in accuracy up to 1 division.

Dry block thermometers - designed for use in all standard heating blocks and water baths with most having arrows indicating critical temperatures.

• Non-mercury liquid