$25 - $50, Digi-Sense

WD-20250-24 Infrared Wand by Digi-Sense

The Digi-Sense Infrared Temperature Wand (Model 20250-24) is a noncontact measurement accessory to be used with the Digi-Sense Professional series of thermocouple thermometers (models 20250-17, -18, -19, -20).

08402-60 Traceable® Mini-Thermistor Thermometer with Calibration by Digi-Sense

Small but powerful unit reads across a wide temperature range, with a high degree of accuracy. Designed to easily fit in a tool box or coat pocket. Features an easy-to-read display, °F/°C selection, hold button, on/off switch, and stainless steel probe.

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

Features

• Get accurate, reliable measurements with included NIST-traceable calibration

Includes

NIST-traceable calibration certificate with data, probe, and one silver-oxide coin cell battery.

WD-20250-50 Compact Digital Multimeter, Manual-Ranging with NIST-Traceable Calibration by Digi-Sense

Get quality instruments that deliver consistent, reliable measurements without depleting your budget. These durable, handheld multimeters are an economical alternative to higher-priced instruments on the market today.

Features

• Reliable measurements, guaranteed! Precalibrated to NIST-traceable standards
• Autoranging on select models, automatically selects the optimal measuring range for maximum resolution
• Stay safe and prevent damage with overload protection
• Increased durability with double-molded plastic housing

Three-in-One Digital Multimeter (20250-52)

• Three practical instruments in one: multimeter, noncontact voltage detector, and flashlight
• Permanently attached test leads so they don't get lost
• Diode check and continuity test included to check accuracy

Compact Digital Multimeters (20250-50, -51)

• CAT III-600 V designation for safety
• Available in manual ranging version
• Bright backlight display has 1.1" tall digits
• Model 20250-50 offers dedicated battery test function to check the quality of your 9 V and 1.5 V batteries

Industrial Digital Multimeters (20250-53, -54)

• CAT III-600 V and CAT III-1000 V ratings for safety
• IP67 rating for dustproof and waterproof protection
• Flashing red LED alerts you to presence of live voltage
• Model 20250-54 has True RMS for improved reading accuracy and an analog bar graph for viewing trends

Applications

• Electrical
• Industrial
• Laboratory
• HVAC
• R & D

Includes

Test leads (models 20250-50, -51, -52), carrying case (models 20250-50, -51) batteries, and NIST-traceable calibration report with data supplied by InnoCal.

94440-00 Traceable® Triple-Display Digital Clock/Timer by Digi-Sense

Triple-display clock/timer features three channels, a count up stopwatch, 500-lap memory, and a clock. All three channels can be operated simultaneously. Memories of all channels can be recalled together. Stopwatch counts up to 24 hours with 0.01-second resolution. Countdown range is 20 hours; countdown and clock functions have a 1-second resolution. Timer counts up to show time elapsed since the alarm.

• Get timing faster-recall all channels' settings instantly
• Use as a countdown timer, count up stopwatch, or clock
• Count up to 24 hours, count down to 20 hours
• Displays time elapsed since alarm

Includes

Magnetic clip and battery.

WD-20250-38 Optional Tri-POD Stand for Meters by Digi-Sense

Use this tripod stand to mount select Digi-Sense test and measurement instruments for stationary measurement applications.

97152-17 Cole-Parmer Traceable® Carbon Fiber Digital Caliper with Calibration; 0 to 6" by Digi-Sense

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

This caliper does not measure depth, nor does it have a friction thumb roller.

• Get accurate, reliable measurements with included NIST-traceable calibration

Includes:

NIST-traceable calibration certificate with data.

90205-25 Traceable® Robo™ Thermometer with Calibration; ±1.0 accuracy (-20 to 100°C) by Digi-Sense

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

• Get accurate, reliable measurements with included NIST-traceable calibration
• Piercing-tip probe is ideal for measuring foods, liquids, and semisolids
• Extra long 8" (200 mm) stem is ideal for measuring reagents, water baths, air and liquids
• °F/°C switchable

Includes

NIST-Traceable calibration certificate with data, probe case with clip, and battery.

WD-20250-35 Precalibrated Pocket Size Moisture Meter by Digi-Sense

Rugged meter measures moisture level in wood products (sawn timber, cardboard, and paper) and hardened materials (plaster, concrete, and mortar).

Features

• Reliable measurements, guaranteed! Precalibrated to NIST-traceable standards.
• Easy-to-use! Insert pins into material and repeat throughout test area
• Convenient measurement modes for wood or material humidity
• User-selectable °F or °C units
• See in all conditions with backlit display
• Low-battery indicator
• Preserve battery with automatic shutoff

Applications

• Building inspection/restoration
• Wood products/woodworking
• Flooring
• Paper products

Includes

Batteries and NIST-traceable calibration report.

35002-13 Waterproof/Shock-Resistant Digital Stopwatch with Calibration by Digi-Sense

Economical NIST-traceable stopwatch features split-mode timing to display the split-time while total timing continues. Alarm clock shows time of day and day of week. Water, dust, and shock resistant.

Includes:

NIST-traceable certificate based on a 24-hour period, 46"L neck cord, and 1.5 V button cell battery.

WD-20250-51 Compact Digital Multimeter, Auto-Ranging with NIST-Traceable Calibration by Digi-Sense

Get quality instruments that deliver consistent, reliable measurements without depleting your budget. These durable, handheld multimeters are an economical alternative to higher-priced instruments on the market today.

Features

• Reliable measurements, guaranteed! Precalibrated to NIST-traceable standards
• Autoranging on select models, automatically selects the optimal measuring range for maximum resolution
• Stay safe and prevent damage with overload protection
• Increased durability with double-molded plastic housing

Three-in-One Digital Multimeter (20250-52)

• Three practical instruments in one: multimeter, noncontact voltage detector, and flashlight
• Permanently attached test leads so they don't get lost
• Diode check and continuity test included to check accuracy

Compact Digital Multimeters (20250-50, -51)

• CAT III-600 V designation for safety
• Available in manual ranging version
• Bright backlight display has 1.1" tall digits
• Model 20250-50 offers dedicated battery test function to check the quality of your 9 V and 1.5 V batteries

Industrial Digital Multimeters (20250-53, -54)

• CAT III-600 V and CAT III-1000 V ratings for safety
• IP67 rating for dustproof and waterproof protection
• Flashing red LED alerts you to presence of live voltage
• Model 20250-54 has True RMS for improved reading accuracy and an analog bar graph for viewing trends

Applications

• Electrical
• Industrial
• Laboratory
• HVAC
• R & D

Includes

Test leads (models 20250-50, -51, -52), carrying case (models 20250-50, -51) batteries, and NIST-traceable calibration report with data supplied by InnoCal.

08649-10 Four-Channel, Jumbo-Display Clock/Timer by Digi-Sense

This timer allows you to count up to or down from 100 hours with 1-second resolution. This timer features a 3/4" high display and multiple channels that can be used simultaneously.

Each channel has a distinctive alarm that sounds for 1 minute, pressing any button will turn off the alarm. Timer memory recalls previous time set. Features time-of-day in 12- or 24-hour formats.

Features:

• Memory returns display to previously programmed countdown time with touch of a button
• Extra-loud alarms sound for 1 minute

Includes:

Magnetic clip, stand, and button cell battery.

94416-00 Push-button Clock/Timer with Back Clip and Magnet by Digi-Sense

Numbered push buttons let you set time quickly and easily. Functions as a clock, 10-hour countdown timer, or 24-hour count up stopwatch. Loud, 70 dB beep and visual "time's up" flashing on the LCD at the completion of the countdown alert you even in noisy industrial settings.

Includes

A built-in clip, magnet, stand for upright display, and one 1.5 V button cell battery.

90205-03 Traceable® Digital Pocket Thermometer with Calibration; ±1°C accuracy by Digi-Sense

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

• Get accurate, reliable measurements with included NIST-traceable calibration
• Wide temperature range from -58 to 572°F (-50 to 300°C)
• Large, bright LCD with 3/8"H digits
• 4-3/4"L x 0.19" dia stainless steel stem fits nicely into included protective sleeve

Includes

Protective case with clip, battery, and NIST-traceable calibration certificate with data.

06449-08 Traceable® Color Frame Four-Channel Timer with Calibration by Digi-Sense

Three bright, colorful frames permit personalization-or dedicate a certain frame for a certain timing task. Four independent timing channels feature unique audible alarms for simultaneous timing. Count up or down from 100 hours for longer duration experiments. Memory function returns the display to the programmed time.

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

Features:

• Get accurate, reliable measurements with included NIST-traceable calibration

Includes:

Three colorful faceplates/frames, built-in stand/pocket clip, magnetic back, two 1.5 V button cell batteries, and NIST-traceable calibration certificate with data.

08610-32 Traceable® Clip-It Single-Channel Digital Timer with Calibration by Digi-Sense

Timer counts down in hours or minutes and also functions as a stopwatch. Acts as a handy reminder for meetings or tasks. The 1/3-inch four-digit display is easy to read. Features time-out function in both up and down counting. Weighs only 1/2 ounce. Features a chemical-resistant ABS case and a magnet for attaching to metal.

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

Features:

• Get accurate, reliable measurements with included NIST-traceable calibration

Includes:

NIST-traceable calibration certificate with data, magnet, clip, and battery.

35002-11 Waterproof/Shock-Resistant Digital Stopwatch by Digi-Sense

Economical and rugged stopwatch features separate stop/stop and reset buttons. Includes alarm clock that shows time of day and day of week. Also includes split-mode timing to freeze the split-time display while total timing continues. Water, dust, and shock-resistant.

Includes:

46"L neck cord and 1.5 V button cell battery.

86460-01 Traceable® Kangaroo Thermocouple Thermometer with Calibration by Digi-Sense

This pocket sized meter comes with a 42-inch probe cable that stores in the 'Kangaroo Pouch' located in the back of the meter. Unwrap the desired length of cable required for your application and simply close the pouch door to lock the cable in place. The cable is attached to a highly accurate stainless steel probe that can be used from general purpose to semi-caustic applications. Unit automatically captures and recalls minimum and maximum temperature readings over any time period. High and low alarm may be programmed in 1deg increments, with the alarm sounding every minute until temperature returns to non-alarm condition. The meter features selectable temperature scale, on/off, Min/Max, hold, and alarm buttons.

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

• Get accurate, reliable measurements with included NIST-traceable calibration
• Perfect 'carry around' portable thermometer fits in a shirt pocket
• High-impact, ABS case

Includes

NIST-traceable calibration certificate with data, and one silver-oxide battery

86460-05 Traceable® Remote-Monitoring Thermocouple Thermometer with Calibration; Celsius by Digi-Sense

This meter has a 4-ft. ribbon micro-cable that allows you to place the probe within an area and close the door without affecting the probe or the door seal. Accurately monitor temperature within freezers, water baths, heating blocks, incubators, refrigerators, and other areas. The meter includes a fast-response type-K probe that can be used for general purpose applications. Users can also choose from a wide verity of probe sold separately for surface, liquid, air or semi-solid materials.

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

• Get accurate, reliable measurements with included NIST-traceable calibration
• For use in remote measurement applications
• High-impact, chemical-resistant ABS case

Includes

One beaded-wire type K probe, NIST-traceable calibration certificate with data, leatherette case, and one 9 V battery.

WD-20250-33 Precalibrated Pen Style Digital Pocket Thermometers by Digi-Sense

Get years of reliable service with these handy temperature measurement instruments. Select from pen-style, large head, and folding-probe models.

All models feature

• Reliable measurements, guaranteed! Precalibrated to NIST-traceable standards.
• 304 stainless steel penetration probe
• User-selectable °F or °C
• Preserve battery with auto shut-off

Pen-style model (20250-33) features

• Min/Max/Hold button
• Protect probe against damage with probe guard protective sleeve

Large-head model (20250-32) features

• Won't roll when placed on a flat surface square head keeps it from tumbling
• Protect probe against damage with probe guard protective sleeve

Waterproof model with folding probe (20250-34) features

• HACCP-approved for food and lab applications
• IP67-rated for use in harsh conditions
• Min/Max/Hold button

Applications

• Food preparation/processing
• Laboratory
• Educational
• R&D
• Light industrial

Includes

Batteries and NIST-traceable calibration report with data supplied by InnoCal.

WD-20250-52 Three-in-One Digital Multimeter with NIST-Traceable Calibration by Digi-Sense

Get quality instruments that deliver consistent, reliable measurements without depleting your budget. These durable, handheld multimeters are an economical alternative to higher-priced instruments on the market today.

Features

• Reliable measurements, guaranteed! Precalibrated to NIST-traceable standards
• Autoranging on select models, automatically selects the optimal measuring range for maximum resolution
• Stay safe and prevent damage with overload protection
• Increased durability with double-molded plastic housing

Three-in-One Digital Multimeter (20250-52)

• Three practical instruments in one: multimeter, noncontact voltage detector, and flashlight
• Permanently attached test leads so they don't get lost
• Diode check and continuity test included to check accuracy

Compact Digital Multimeters (20250-50, -51)

• CAT III-600 V designation for safety
• Available in manual ranging version
• Bright backlight display has 1.1" tall digits
• Model 20250-50 offers dedicated battery test function to check the quality of your 9 V and 1.5 V batteries

Industrial Digital Multimeters (20250-53, -54)

• CAT III-600 V and CAT III-1000 V ratings for safety
• IP67 rating for dustproof and waterproof protection
• Flashing red LED alerts you to presence of live voltage
• Model 20250-54 has True RMS for improved reading accuracy and an analog bar graph for viewing trends

Applications

• Electrical
• Industrial
• Laboratory
• HVAC
• R & D

Includes

Test leads (models 20250-50, -51, -52), carrying case (models 20250-50, -51) batteries, and NIST-traceable calibration report with data supplied by InnoCal.

90205-15 Traceable® Pocket Thermometer with Calibration; ±1.5°C accuracy by Digi-Sense

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

Thermometer feature a chemical resistant stainless steel stem, plastic casing, protective case with pocket clip, battery and is F°/C° selectable. Thermometer has a unique, flat-profile design. Probe guard snaps into handle to extend the overall length to 10-3/4 inches (275mm) making it ideal for heard to reach applications such as HVAC grills and registers.

• Get accurate, reliable measurements with included NIST-traceable calibration
• Unique flat-profile design
• Features MIN/MAX, HOLD, and selectable °F/°C
• NIST-Traceable

Includes

Probe guard, pocket clip, battery, and NIST-traceable calibration certificate with data.

90205-24 Traceable® Remote Probe Digital Thermometer with Calibration; Stick-Style, Fahrenheit by Digi-Sense

Stick-Style Remote Probe Thermometers have a 3-ft flexible cord, Min/Max memory, and simultaneous display of probe and ambient temperatures. Meter is chemical-resistant and shockproof; comes with a remote sensor and cable that can be submerged. Use as a pocket thermometer or mount for continuous use with the supplied self-adhesive Velcro® tabs.

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

• Get accurate, reliable measurements with included NIST-traceable calibration

Includes

NIST-traceable calibration certificate with data.

WD-20250-32 Precalibrated Large Head Digital Pocket Thermometer by Digi-Sense

Get years of reliable service with these handy temperature measurement instruments. Select from pen-style, large head, and folding-probe models.

All models feature

• Reliable measurements, guaranteed! Precalibrated to NIST-traceable standards.
• 304 stainless steel penetration probe
• User-selectable °F or °C
• Preserve battery with auto shut-off

Pen-style model (20250-33) features

• Min/Max/Hold button
• Protect probe against damage with probe guard protective sleeve

Large-head model (20250-32) features

• Won't roll when placed on a flat surface square head keeps it from tumbling
• Protect probe against damage with probe guard protective sleeve

Waterproof model with folding probe (20250-34) features

• HACCP-approved for food and lab applications
• IP67-rated for use in harsh conditions
• Min/Max/Hold button

Applications

• Food preparation/processing
• Laboratory
• Educational
• R&D
• Light industrial

Includes

Batteries and NIST-traceable calibration report with data supplied by InnoCal.

94460-28 Traceable® Big-Digit Stopwatch with Calibration by Digi-Sense

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

Jumbo 1/2" H digits and high accuracy make this the perfect stopwatch for the lab or the field. Display time-of-day, date, and day of week. Also includes time of day alarm. ABS plastic case is water-, dust-, and shock-resistant. Mount to various surfaces with the included clip and Velcro®.

• Get accurate, reliable measurements with included NIST-traceable calibration
• Features: water-resistant, time-of-day alarm, ABS plastic case, AM/PM, date, day, alarm
• Stopwatch functions: single-action, time-out, cumulative-split, and continuous timing

Includes

42"L neck cord, one 1.5V button cell battery, and NIST-traceable calibration certificate with data.