Digi-Sense

WD-36225-78 1-Zone Temperature Controller; Limit/Alarm, Type T, 120V/15A by Digi-Sense

A limit control is a secondary safety device and a must for applications where temperature overshoot can cause serious problems. Used in conjunction with a primary temperature control, the limit control will cut power to its output and turn off all resistive loads if your upper temperature setpoint is achieved. Display shows both limit set point and safe mode/alarm condition at the same time. A manual reset is required if an alarm condition occurs. The controller also features an audible alarm function, temperature selectable and one panel mounted receptacle that accept a three-prong plug. Select from models for types J, K, or T thermocouples with miniconnectors, or 100 ohm platinum RTD probes. This unit comes with a lattice support bracket, which is ideal for mounting to maximize space.

• Models available for type J, K, or T thermocouples or RTD probes

Includes

6' detachable power cord and lattice support bracket.

WD-36225-79 1-Zone Temperature Controller; Limit/Alarm, RTD, 120V/15A by Digi-Sense

A limit control is a secondary safety device and a must for applications where temperature overshoot can cause serious problems. Used in conjunction with a primary temperature control, the limit control will cut power to its output and turn off all resistive loads if your upper temperature setpoint is achieved. Display shows both limit set point and safe mode/alarm condition at the same time. A manual reset is required if an alarm condition occurs. The controller also features an audible alarm function, temperature selectable and one panel mounted receptacle that accept a three-prong plug. Select from models for types J, K, or T thermocouples with miniconnectors, or 100 ohm platinum RTD probes. This unit comes with a lattice support bracket, which is ideal for mounting to maximize space.

• Models available for type J, K, or T thermocouples or RTD probes

Includes

6' detachable power cord and lattice support bracket.

WD-36225-90 104A PL512 On/Off Temperature Controller, Type J, -328 to 2192°F, 120V by Digi-Sense

This controller is designed to turn the power on and off to the output receptacle based on the set temperature. Equipped with a dial contol that allows you to set and regulate the desired temperature. Features a digital display, selectable temperature scales, and one panel-mointed receptacle. To save bench space, mount the unit to a support pole or lattice

• A basic on/off controller for processes where temperature stability is less critical

WD-89800-11 TC9100 Benchtop Temperature Controller for Thermocouples; 115 VAC by Digi-Sense

The benchtop single-loop temperature controllers are designed to regulate a user-defined set point temperature. The microprocessor control provides heating/cooling tolerances for demanding applications found in laboratory or industrial environments. Temperature scale selectable to read in °F, °C, K (Kelvin), or °R (Rankine). An auto-tuning function provides automatic configuration of the PID parameters with minimum user configuration required. Nonvolatile memory stores all user-defined information.

A convenient output receptacle, located on the back of the units, allows for direct plug-in of heaters and other devices. All models accept eight thermocouple types (J, K,N,R,S,T B, and E). Safety features include a loop-break alarm, overtemperature and timer cutoffs, separate fuses for instrument and output receptacle, and audible/visible out-of-range alarms.

Includes

grid support bracket, electrical noise canceling ferrite clip, and 6 ft power cord with U.S. standard plug.

• Simple on/off control to sophisticated auto-tuning PID control
• Simultaneous view measured value and set point on two-line display
• Front panel indicates output and alarm conditions
• Grid support bracket ideal for fume hood mounting

WD-89800-12 TC9100 Benchtop Temperature Controller for Thermocouples; 230 VAC by Digi-Sense

The benchtop single-loop temperature controllers are designed to regulate a user-defined set point temperature. The microprocessor control provides heating/cooling tolerances for demanding applications found in laboratory or industrial environments. Temperature scale selectable to read in °F, °C, K (Kelvin), or °R (Rankine). An auto-tuning function provides automatic configuration of the PID parameters with minimum user configuration required. Nonvolatile memory stores all user-defined information.

A convenient output receptacle, located on the back of the units, allows for direct plug-in of heaters and other devices. All models accept eight thermocouple types (J, K,N,R,S,T B, and E). Safety features include a loop-break alarm, overtemperature and timer cutoffs, separate fuses for instrument and output receptacle, and audible/visible out-of-range alarms.

Includes

grid support bracket, electrical noise canceling ferrite clip, and IEC socket power connector for interchangeable cord sets (specify country of destination when ordering).

• Simple on/off control to sophisticated auto-tuning PID control
• Simultaneous view measured value and set point on two-line display
• Front panel indicates output and alarm conditions
• Grid support bracket ideal for fume hood mounting

WD-89800-13 TC9600 Benchtop Temperature Controller with USB Output, for Thermocouple, RTD, or Thermistors; 115 VAC by Digi-Sense

The benchtop single-loop temperature controllers are designed to regulate a user-defined set point temperature. The microprocessor control provides heating/cooling tolerances for demanding applications found in laboratory or industrial environments. Temperature scale selectable to read in °F, °C, K (Kelvin), or °R (Rankine). An auto-tuning function provides automatic configuration of the PID parameters with minimum user configuration required. Nonvolatile memory stores all user-defined information.

A convenient output receptacle, located on the back of the units, allows for direct plug-in of heaters and other devices. All models accept eight thermocouple types (J, K,N,R,S,T B, and E). Safety features include a loop-break alarm, overtemperature and timer cutoffs, separate fuses for instrument and output receptacle, and audible/visible out-of-range alarms.

The advance controllers also include a USB communication port, audible alarm, external alarm relay output, and a detachable power cord. Free software features real-time graphing, logging of measured temperature and set point temperature, help menu, and ability to interface with other Windows-based programs.

Includes

grid support bracket, electrical noise canceling ferrite clip, and 6 ft power cord with U.S. standard plug.

• Simple on/off control to sophisticated auto-tuning PID control
• Simultaneous view measured value and set point on two-line display
• Front panel indicates output and alarm conditions
• Grid support bracket ideal for fume hood mounting
• Free software offers remote computer control of system operations
• Program up to nine ramp and soak profiles of up to 16 segments each

WD-91428-01 Temp10 Single-Input Type K Thermocouple Thermometer by Digi-Sense

These robust and reliable meters work in any environment from the lab to the production floor. The sturdy armored construction protects against knocks and jars. All models are ergonomically designed for both large and small hands alike. The sealed keypad and ABS plastic case meet IP54 standards for splash resistance. Select from the three most popular thermocouple types J, K, or T to meet all your basic temperature measurement needs.

Features include a large, easy-to-read illuminated display; an easy-to-use five button control panel; Min/Max and Hold functions; °F/°C selection; auto shutoff; and low-battery indicator. Each thermometer is individually factory calibrated. Automatic field calibration is easily performed: simply place the probe in a container packed with ice, fill with water, then press the "CAL" button meter automatically recognizes the freezing point.

Digi-Sense's exclusive "3-WAY HANDS-FREE" capability allows "hands-free" use use the built-in stand on a table top, attach the meter to metal objects through magnets inserted into the armor boot, or hang from a pipe or belt using the hook-and-loop strap. Meters come standard with the integral stand; the "hands-free" option adds magnets and strap (order separately).

Includes

Protective rubber armor/boot with stand and three AA batteries.

Key Features

• 3-way hands-free operation available
• Large easy-to-read screen with back light
• Rugged armor with built-in stand—withstand the toughest conditions
• Easy-to-use automatic field calibration ensures accurate readings
• Probes are sold separately

WD-91428-03 Temp100 Dual-Input Thermocouple Thermometer by Digi-Sense

Choose the Digi-Sense® Temp-100 thermometer for single temperature readings or dual temperature readings simultaneously. Meter accepts all Type J, T, E, and K thermocouple probes with ANSI miniconnector. This robust and reliable meter works in any environment from the lab to the production floor. The sturdy armored construction protects against knocks and jars. Ergonomically designed for both large and small hands alike. The sealed keypad and ABS case meet IP54 standards for splash resistance. The meter has a large illuminated display, and a seven-button control panel that allows the user through easy-to-use menus to choose desired functionality.

Features include Min/Max, Hold, and average functions; °F/°C selection; offset; out-of-range alarm with audible/visible indicator; auto shutoff; and low-battery indicator. Store up to 1000 sets of readings in the nonvolatile memory. Take differential temperature measurements with the T1/T2 function.

The multidata LCD simultaneously indicates the readings of each probe, as well as the differential reading. For improved readability with rapidly changing temperatures, the meter resolution is keypad selectable. Above 999.9°, the meter automatically switches from 0.1° resolution to 1° resolution, below -99°C the meter autoranges to 1°C resolution.

The Temp-100 is individually factory calibrated. Automatic field calibration is easily performed for oither a single- or dual-point calibration for each probe. Simply place the probe in a container packed with ice, fill with water, activate the calibration function, and the meter automatically recognizes the freezing point.

Digi-Sense s exclusive "3-WAY HANDS-FREE" capability allows "hands-free" operation use the built-in stand on a table top, attach the meter to metal objects through magnets inserted into the armor boot, or hang from a pipe or belt using the hook-and-loop strap. Meter comes standard with the integral stand; the "hands-free" option adds magnets and strap (order separately)

Includes

Protective rubber armor/boot with stand and three AA batteries.

Key Features

• 3-way hands-free operation available
• 3-way hands-free operation available
• Nonvolatile memory stores up to 1000 sets of readings!
• Rugged armor with built-in stand withstand the toughest conditions
• Easy-to-use automatic field calibration ensures accurate readings
• Probes are sold separately

WD-91428-06 Temp340 Single-Input Data Logging Thermistor Thermometer by Digi-Sense

Choose the Digi-Sense® Temp-340 thermometer that has real time data logging and a USB data output. This robust and reliable meter is ideal for use in food processing plants, research and science labs, building maintenance areas, and more! The sturdy armored construction protects against knocks and jars. Ergonomically designed for both large and small hands alike. The sealed keypad and ABS case meet IP54 standards for splash resistance. The meter has a large illuminated display, and a seven-button control panel that allows the user through easy-to-use menus to choose desired functionality.

The seven-button control panel and intuitive on-screen menu guide you in choosing your desired functionality. Additional meter features include Min/Max, Hold, and average functions; °F/°C selection; time stamp/clock; countdown timer; out-of-range alarm with audible/visible indicator; auto shutoff; and low-battery indicator. Manually or automatically log up to 2000 sets of readings in real time. Logging interval is selectable from 1 second to 60 minutes. Order an optional AC adapter to conserve battery life during extended operation.

Digi-Sense s exclusive "3-WAY HANDS-FREE" capability allows "hands-free" operation use the built-in stand on a table top, attach the meter to metal objects through magnets inserted into the armor boot, or hang from a pipe or belt using the hook-and-loop strap. Meter comes standard with the integral stand; the "hands-free" option adds magnets and strap (order separately).

Includes

Protective rubber armor/boot with stand and three AA batteries.

Key Features

• 3-way hands-free operation available
• Transfer data via USB
• Menu-driven set up to easily customize your meter
• Rugged armor with built-in stand withstand the toughest conditions
• Easy-to-use automatic field calibration ensures accurate readings

WD-91428-07 Temp16 Single-Input RTD Thermometer by Digi-Sense

This robust and reliable meter work in any environment from the lab to the production floor. The sturdy armored construction protects against knocks and jars. All models are ergonomically designed for both large and small hands alike. The sealed keypad and ABS case meet IP54 standards for splash resistance.

Features include a large easy-to-read illuminated display, an easy-to-use five-button control panel, Min/Max, Hold, degF / degC switchable, auto shutoff, and low battery indicator. Each thermometer is individually factory calibrated. Automatic field calibration is easily performed. Simply place the probe in a container packed with ice, fill with water, then press the "CAL" button meter automatically recognizes the freezing point.

Meter requires a RTD probe with a Digi-Sense three-pin plug.

OAKTON's exclusive "3-WAY HANDS-FREE" capability allows "hands-free" operation use the built-in stand on a table top, attach the meter to metal objects through magnets inserted into the armor boot, or hang from a pipe or belt using the hook-and-loop strap. Meter comes standard with the integral stand; the "hands-free" option adds magnets and strap (order separately).

Includes

Protective rubber armor/boot with stand and three AA batteries.

Key Features

• 3-way hands-free operation available
• Large easy-to-read screen with back light
• Rugged armor with built-in stand withstand the toughest conditions
• Easy-to-use automatic field calibration ensures accurate readings
• Probes are sold separately

WD-91428-08 Temp360 Single-Input Data Logging RTD Thermometer by Digi-Sense

Choose the Digi-Sense® Temp-340 thermometer for real-time data logging with USB data output. This robust and reliable meter is ideal for use in food processing plants, research and science labs, building maintenance areas, and more! The sturdy armored construction protects against knocks and jars. Ergonomically designed for both large and small hands alike. The sealed keypad and ABS case meet IP54 standards for splash resistance. The meter has a large illuminated display, and a seven-button control panel that allows the user through easy-to-use menus to choose desired functionality.

Features include real-time data logging and a USB data output. The seven-button control panel and intuitive on-screen menu guides you in choosing the desired functionality. Additional meter features include Min/Max, Hold, and average functions; °F/°C selection; time stamp/clock; countdown timer; out-of-range alarm with audible/visible indicator; auto shutoff; and low-battery indicator. Order an optional AC adapter to conserve battery life during extended operations. Manually or automatically log up to 2000 sets of readings in real time. Logging interval is selectable from 1 second to 60 minutes.

Meter requires a RTD probe with a Digi-Sense three-pin plug.

Digi-Sense s exclusive "3-WAY HANDS-FREE" capability allows "hands-free" operation use the built-in stand on a table top, attach the meter to metal objects through magnets inserted into the armor boot, or hang from a pipe or belt using the hook-and-loop strap. Meter comes standard with the integral stand; the hands-free option adds magnets and strap (order separately).

Includes

Protective rubber armor/boot with stand and three AA batteries.

Key Features

• 3-way hands-free operation available
• Transfer data via USB
• Menu-driven set up to easily customize your meter
• Rugged armor with built-in stand withstand the toughest conditions
• Easy-to-use automatic field calibration ensures accurate readings
• Probes are sold separately

WD-99460-05 Refrigerator/Freezer Data Logger with TraceableLIVE® Wireless Capability and Calibration; 1 Bottle/1 Bullet Probes by Digi-Sense

TraceableLIVE Wireless Technology allows multiple users to stay connected and monitor critical environments 24/7 wherever you go.

These data logging thermometers with Wi-Fi offer an easy and secure way to connect your smartphone, tablet, or personal computer remotely with your water baths, refrigerators, freezers, and biological/pharmaceutical lab equipment.

Once setup is complete you can securely monitor current temperatures, control your alarm parameters remotely, view your data logging history, run reports in real time, and give access to other team members. No local software is required to use the cloud-based data interface. Get mobile push notifications, emails, or texts for temperature alarms, connectivity interruptions, or low-battery condition. Up to 672 records can be stored in seven days if the device is set to 15-minute intervals.

Use the included Velcro® strip to mount the probe to the inside of a freezer. Micro cable on the probe permits freezer door to close on it. Mount the logger to the outside of the freezer with the included magnetic strip or use the built-in bench stand to place on countertop. A large LCD displays probe and MIN/MAX temperatures. A low-cost subscription is required for TraceableLIVE® use.

Plus the NIST-traceable precalibration means you get reliable measurements right out of the box, saving you time and money!

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately. NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

Each thermometer comes with two probes. Model 99460-00 is supplied with two probes enclosed in nontoxic glycol-filled bottles, protecting them from rapid temperature changes when refrigerator door is opened.

*Requires a TraceableLIVE subscription.

For sale only in Australia, Brazil, Canada, China, Europe, India, Japan, Mexico, New Zealand, Singapore, South Korea, and USA.

Includes

Two probes, Velcro® strip, magnetic strip, built-in stand, four AAA alkaline batteries, and NIST-traceable calibration certificate with data.

Key Features

• Connect to your data via smartphone, tablet, or PC using TraceableLIVE wireless capability*
• View current temperature conditions anywhere cloud-based interface sends email, text, and push notifications
• No software required web, Android™, Apple® iOS data visibility
• Get accurate, reliable measurements with included NIST-traceable calibration

WD-99460-10 Refrigerator/Freezer Data Logger with TraceableLIVE® Wireless Capability and Calibration; 2 Bullet Probes by Digi-Sense

TraceableLIVE Wireless Technology allows multiple users to stay connected and monitor critical environments 24/7 wherever you go.

These data logging thermometers with Wi-Fi offer an easy and secure way to connect your smartphone, tablet, or personal computer remotely with your water baths, refrigerators, freezers, and biological/pharmaceutical lab equipment.

Once setup is complete you can securely monitor current temperatures, control your alarm parameters remotely, view your data logging history, run reports in real time, and give access to other team members. No local software is required to use the cloud-based data interface. Get mobile push notifications, emails, or texts for temperature alarms, connectivity interruptions, or low-battery condition. Up to 672 records can be stored in seven days if the device is set to 15-minute intervals.

Use the included Velcro® strip to mount the probe to the inside of a freezer. Micro cable on the probe permits freezer door to close on it. Mount the logger to the outside of the freezer with the included magnetic strip or use the built-in bench stand to place on countertop. A large LCD displays probe and MIN/MAX temperatures. A low-cost subscription is required for TraceableLIVE® use.

Plus the NIST-traceable precalibration means you get reliable measurements right out of the box, saving you time and money!

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately. NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

Each thermometer comes with two probes. Model 99460-00 is supplied with two probes enclosed in nontoxic glycol-filled bottles, protecting them from rapid temperature changes when refrigerator door is opened.

*Requires a TraceableLIVE subscription.

For sale only in Australia, Brazil, Canada, China, Europe, India, Japan, Mexico, New Zealand, Singapore, South Korea, and USA.

Includes

Two probes, Velcro® strip, magnetic strip, built-in stand, four AAA alkaline batteries, and NIST-traceable calibration certificate with data.

Key Features

• Connect to your data via smartphone, tablet, or PC using TraceableLIVE wireless capability*
• View current temperature conditions anywhere cloud-based interface sends email, text, and push notifications
• No software required web, Android™, Apple® iOS data visibility
• Get accurate, reliable measurements with included NIST-traceable calibration

WD-99460-15 Refrigerator/Freezer Data Logger with TraceableLIVE® Wireless Capability and Calibration; 2 SS Probes by Digi-Sense

TraceableLIVE Wireless Technology allows multiple users to stay connected and monitor critical environments 24/7 wherever you go.

These data logging thermometers with Wi-Fi offer an easy and secure way to connect your smartphone, tablet, or personal computer remotely with your water baths, refrigerators, freezers, and biological/pharmaceutical lab equipment.

Once setup is complete you can securely monitor current temperatures, control your alarm parameters remotely, view your data logging history, run reports in real time, and give access to other team members. No local software is required to use the cloud-based data interface. Get mobile push notifications, emails, or texts for temperature alarms, connectivity interruptions, or low-battery condition. Up to 672 records can be stored in seven days if the device is set to 15-minute intervals.

Use the included Velcro® strip to mount the probe to the inside of a freezer. Micro cable on the probe permits freezer door to close on it. Mount the logger to the outside of the freezer with the included magnetic strip or use the built-in bench stand to place on countertop. A large LCD displays probe and MIN/MAX temperatures. A low-cost subscription is required for TraceableLIVE® use.

Plus the NIST-traceable precalibration means you get reliable measurements right out of the box, saving you time and money!

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately. NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

Each thermometer comes with two probes. Model 99460-00 is supplied with two probes enclosed in nontoxic glycol-filled bottles, protecting them from rapid temperature changes when refrigerator door is opened.

*Requires a TraceableLIVE subscription.

For sale only in Australia, Brazil, Canada, China, Europe, India, Japan, Mexico, New Zealand, Singapore, South Korea, and USA.

Includes

Two probes, Velcro® strip, magnetic strip, built-in stand, four AAA alkaline batteries, and NIST-traceable calibration certificate with data.

Key Features

• Connect to your data via smartphone, tablet, or PC using TraceableLIVE wireless capability*
• View current temperature conditions anywhere cloud-based interface sends email, text, and push notifications
• No software required web, Android™, Apple® iOS data visibility
• Get accurate, reliable measurements with included NIST-traceable calibration