All Products

M011-0006-000 MP184 PPB Black Boot Kit, 0.001-15,000 ppm VOC, BLE(Bluetooth Low Energy) by mPower Electronics

The NEO is one of the most advanced handheld VOC (Volatile Organic Compound) monitors available for ppb (parts per billion) detection. VOCs include a variety of chemicals such as benzene, alcohols, fuels, paint thinners, industrial solvents and many others, which can have short and long-term adverse health effects. Measuring these compounds is essential for worker protection in industries like oil & gas, fire & hazmat, pharmaceuticals, paints & adhesives, and many others. In addition, VOC monitoring is useful chemical process control, detecting leaks and other releases to the environment, and in measuring indoor air quality. The NEO offers several models from the most sensitive 1 ppb to a high range up to 15,000 ppm for different applications, and a filter tube version (NEO BENZ) for benzene-specific or butadiene-specific measurements. In addition to the standard continuous read-out, a Leak Detection and Repair (LDAR) mode is included. Novel designs of the Photo-ionization Detector (PID) and Ultraviolet (UV) lamp provide outstanding sensitivity, stability and reproducibility. Includes real-time data monitoring using mPower Suite software via cable to a PC or via Bluetooth to an Android phone or tablet.

Features, Functions and Benefits

• Smaller and lighter weight than comparable PIDs
• Most stable ppb-level PID on the market
• Outstanding linearity over full measurement range
• Easy charging on laptop or other USB port
• USB Micro Charger; combination USB-m charging and communications cable
• Powerful battery (run time 24 hours)
• Bluetooth Low Energy (BLE) connectivity standard
• Search Mode for LDAR Sampling
• Filter tube version for benzene- or butadiene-selective measurements
• Large backlight graphic display
• Lamp glow indicator
• Rugged, stainless-steel housing with rubber outer boot

400563 6251 625 Hygrometer Remote Probe Kit by Testo

The compact instrument with built-in humidity probe head for measuring air moisture and temperature. The large 2 line display shows humidity, wet bulb temperature or dewpoint as well as temperature. When measuring at hard-to-access points, the humidity probe head can be easily removed and attached to the handle via the probe cable (accessory). Alternatively, the readings can be transmitted wirelessly over wide distances from the probe to the measuring instrument. To do this, the humidity probe head is attached to the radio handle (accessory) and the radio module (accessory) is added to testo 625.

Kit Includes:

• 0563 6251 - 625 Hygrometer with integral humidity probe head
• 0516 0201 - Compact class service case
• 0430 9725 - Handle for RH probe head 625, includes cable

• Displays temperature and relative humidity / wet bulb temperature / dewpoint
• Max./min. values
• Hold button to freeze readings
• Display light
• Auto Off function
• TopSafe, the indestructible protection case (optional)
• Patented humidity sensor
• 2 year guaranteed long-term stability
• TopSafe, instrument protection against dirt and knocks (optional)

Part Number: 103L-248-100

Multiflow Regulator

The 8000 Series regulators are used for calibration of instruments that draw the gas mixture with an internal pump. Constructed of nickelplated brass and aluminum, they are compatible with reactive and non-reactive gas mixtures. They supply flows of 0.1 LPM to 3.0 LPM, and are suitable for use with high pressure refillable cylinders as well as nonrefillables.

Part Number: 8330

Part Number: E1016500PA

GrowControl™ SXF Flow & Temperature Monitor Kit by Agrowtek

GrowControl™ SXF series precision digital sensor transmitters and controllers for inline flow and temperature feature an advanced flow sensor with no moving parts. Vortex flow meters create eddys as water flow through which are picked up and converted to a flow reading by an accoustic sensor. SXF flow meters have no moving parts and won't jam or clog with small debris and minor sludge.

Color LCD display and button interface model allows instant access to sensor readings, guided calibration, alarms, historical graphing and more. Internal memory logs over 20,000 data points per sensor. Connects to Agrowtek's GrowControl™ GCX Cultivation Controllers as part of a complete facility control solution.

LX1 USB AgrowLink connects the GrowNET™ port to a PC with free PC software for datalog download, graphing, calibration, configuration, firmware updates, etc. LX2 ModLINK™ connects GrowNET™ devices to RS-485 for MODBUS RTU protocol communication.

Features

• Water Temperature -20 - 60°C x 0.1°
• Flow Rate 2 - 40 gpm
• Color LCD display for sensor monitoring & graphing (optional)
• Made in USA
• GrowNET™ port for connection to AgrowDose Pumps, LX1 USB link or LX2 ModLINK
• MODBUS RTU for industrial PLC applications Power Input: 12-24Vdc
• Durable splash-proof ABS plastic enclosure Conformal coated circuit boards
• 1-Year Warranty

Features

• Greenhouses & Indoor Growing Facilities
• Industrial Processes, PLC's
• Aquarium
• Pool & Spa
• Analytical, Data Logging research & academic applications
• OEM & custom applicatoins

UVT-LED-SW Submersible UV Transmittance Monitor by Sensorex

Sensorex's UVT-LED transmittance monitors are the first UVT monitors in the world to use a UV-C LED light source. This technology offers advantages over traditional mercury lamp UVT instrumentation, including stable output with zero warm up time. The result is more accurate UVT measurements over a longer period of time, without the need for frequent recalibration or light source replacement.

Automatic Cleaning and Calibration

Maintenance is minimal thanks to our patented wiper technology, which delivers a swift cleaning cycle and automatic calibration to a quartz reference standard.

Effortless Installation or Retrofitting

We offer several different mounting kits - perfect for new installs in an open channel, retrofits for Hach⪚ models, or various in-line configurations using a sanitary connection.

Simple Connectivity

The sensor directly outputs a 4-20mA signal for tuning the power of a UV disinfection system or monitoring with a data logger.

• Stable measurements driven by UV-C LED technology
• Patented automatic cleaning and calibration
• Simple connectivity with direct 4-20mA output
• Reduced maintenance with no field servicable parts
• Continuous monitoring for UV disinfection control

2122011 GMA 104-R Four Channel Rack Mounted Controller Card Includes Feature Relays by GfG

Stationary gas monitoring systems

In many industrial operations, toxic or combustible gases and vapors or oxygen deficiency can be hazardous to personnel and disruptive to production. Even small amounts of some materials can cause dangerous situations. Both legal regulations and your responsibility to your workers demand continuous, responsive, and reliable monitoring for such dangerous gases. Only a fixed gas warning system like the GMA 100 II provides the security of a round-the-clock gas monitoring without the expense of manual measurement by your staff.

Control module GMA 100 II

The GMA 100 II stationary gas warning system is comprised of a control module and a remote sensor (MWG). The sensor continuously monitors the gas concentration and sends a signal via cable to the GMA 100 II control module for evaluation. The GMA 100 II constantly monitors its own operational status and powers the remote sensor.

Immediate recognition and warning of gas hazards

The GMA 100 II provides three alarm levels that can be used to initiate appropriate responses to gas hazards. The pre-alarm, for example, warns of low gas concentrations, indicating leaks, before dangerous situations occur. The other two main alarm thresholds indicate direct danger requiring immediate action. Alarm levels can be variably adjusted within the detection range and adapted to changing requirements. Every threshold can be set to latching / non-latching and resettable / non-resettable alarm points.

Quick reaction means increased safety

Every control module provides optional voltage-free relays for the three alarms and for fault warning. The relays may be used for controlling external alarm devices like beacons or buzzers, or they can activate specific counter measures (closing valves or turning on a fan) to eliminate the danger from gases or vapors. The GMA 100 II is flexible enough to accommodate your individual requirements. Every relay can be either a normally closed (NC) or normally open (NO) contact, and works in either closed or open circuit operation.

Easy Handling

A keypad controls the display of detection range, gas and units. Relays can be controlled and checked individually. No special tools or instruments are required. Alarm levels and calibration are set with push button menu control mechanical fine tuning with potentio meters is a thing of the past.

Single or collective alarm

The GMA RB relay module and the GMA SW key-operated switch allow you to group several control modules. The key-operated switch suppresses alarms during servicing.

In addition to the collective alarm, each controller can have up to four relays which can activate or deactivate electrical devices such as exhaust fans, valves, alarm horns or lights.

Protected against power failure

In case of a power failure, the optional battery back-up NAV takes over automatically and without delay to preserve safety. The NAV slides directly into the rack; no additional wiring is required.

More than 100 GfG sensors safety for all gas hazards

GfG Instrumentation s array of powerful and dependable remote sensors (MWG) provide a safe and reliable solution for individual detection tasks.

Combustible gases

Where combustible gases may build up to explosive concentrations, GfG Instrumentation offers a variety of monitoring techniques.

Toxic gases

Specially selected GfG sensors provide reliable monitoring of areas where toxic gases and vapors may be present.

Oxygen

Electrochemical sensors ensure reliable protection from hazards caused by oxygen deficiency or surplus.

GfG s remote sensors are available for more than 100 gases. Every remote sensor can be connected to the GMA 100 II. A simple calibration with a laptop rapidly configures the GMA 100 II to almost all requirements.

Monitoring four detection points simultaneously: GMA 100 / 4

The model GMA 100 / 4 has all the features of the GMA 100 II, and can operate four remote sensors simultaneously on one control module. This allows the configuration of a lowcost and space-saving gas monitoring system for multiple detection points.

Features

• Flexible, customizable, and economical
• Microprocessor controlled for all monitoring tasks
• Easy to operate

Includes

• G300 Detector
• Specified sensor
• Alkaline batteries or rechargeable NiMH battery pack as specified
• Charger (with rechargeable battery pack only)
• Fixed gooseneck (with alkaline battery pack only)
• Manual

1690D In-line Heater, 70,000 BTU, 120V/Propane - Requires Blower Model 1325D by Pelsue

Model 1690D, when coupled with the 1325D Axial Ventilator, provides fresh warm air for all your confined space needs. This unit is propane fired and electrically powered. Requires the model 1325D Ventilator to operate. A Remote Thermostat Control (Model 1620) is also available.

8325800 X-am 8000 Multi-Gas Detector with Battery, Shoulder Strap, Internal Pump, Pump Adaptor, Inductive Charger and Power Supply by Draeger

Clearance measurement was never this easy and convenient: The 1 to 7 gas detector detects toxic and flammable gases as well as vapors and oxygen all at once – either in pump or diffusion mode. Innovative signaling design and handy assistant functions ensure complete safety throughout the process.

Multi-gas detector

• 1- to 7 gas detection device
• for clearance measurement
• detection of toxic and combustible gases as well as vapors and oxygen

Specially designed for use with a pump, optimized for clearance measurement

The Draeger X-am® 8000 is equipped with a very powerful pump. It can be connected with hoses of up to 45 meters in length. A pump adapter makes it easy to switch between diffusion and pump mode at any time. This means the pump is only operated when you actually need it. That saves energy, reduces wear and tear, and extends the lifespan of the pump.

Handy and durable, the Draeger X-am® 8000 is intuitive to operate single-handedly using three function keys. The easy-to-read color display clearly lays out all the information for you.

The multi-gas detector also features advanced software functions including change of measurement gas for PID, CatEx and IR sensor during operation. This is based on an on-board library and a convenient assistant to hide unused sensor channels and adapt the flexible instrument to the measurement task.

Standard accessories include a sturdy shoulder strap so you can comfortably carry the X-am 8000. Thanks to its compact and robust construction, the device can withstand even the harshest conditions.

Clearance measurement, release and documentation in no time

The X-am 8000 effectively supports various applications with specially developed assistant functions that guide you through each process step by step. During clearance measurement, for example, the smart assistant calculates the necessary flooding time for the device and probe (FKM hose) based on parameters such as measuring gases, temperature limits, and the indicated hose length. Additionally, customer defined flooding times are also possible.

When monitoring for potentially high methane concentrations, an optional automatic measurement range switch makes it easier to take a reading: If the Cat-Ex sensor measures values above 100 % LEL, the display switches to the range of 0 to 100 vol %. A similar function to measure in % LEL and vol % simultaneously is also available for the IR EX ES sensor.

The DraegerSensor CatEx 125 PR Gas offers a special variant for the measuring gas methane, which enables measurements in the ppm range. The performance of selected sensors has been verified by an external approval body within the scope of the measurement performance approval (EN 60079-29-1) for combustible gases and vapors including methane, propane and n-nonane.

An additional useful tool is CSE Connect. It combines an app, specially designed for the X-am 8000, with a cloud-computing solution. Measuring jobs can be quickly and easily transferred to the app using an online application. An optional Bluetooth® module in the Draeger X-am 8000 enables measured values to be transferred automatically to the CSE Connect app. You can also easily and conveniently use the app to create measurement reports. This saves time and helps you manage your measuring tasks during clearance measurements more efficiently.

Clear signaling design

The signal system of the Draeger X-am 8000 is based on a clear color code, in accordance with the requirements of EN 60079-29-1, EN 45544-1 and EN 50104:

• Red light = gas alarm
• Yellow light = device-related alarm, e.g. low battery
• Green light = device is ready for use

The green glow of the D-Light allows you to see from a distance whether the device has been properly tested and is ready for use.

In case of an alarm, the X-am 8000 alerts you with colorful warning LEDs, a loud horn (100 dB(A) at a distance of 30 cm), and clearly palpable vibration. Optionally, four preset hazard symbols are available for the display which explicitly indicate the presence of explosive or toxic gas hazards, for example. This allows the user to easily recognize the type of hazard based purely on the symbol displayed.

The X-am 8000 is equipped with an impact detection system. The event report indicates whenever severe mechanical impacts have occurred that might result in functional impairments of the device or the sensors. These are also documented in the data logger. With this information, a device operator can specifically check the device. The instrument can also be locked after a detected impact as well.

Economical Fleet Management

Bumptest and calibration are carried out simply and quickly using the Draeger X-dock® calibrating station. Its low test gas consumption keeps operating costs to a minimum.

Its reporting function and numerous other useful features make the X-dock Manager PC software a smart addition to any fleet management operation. To identify devices in your fleet, you can either use tried and tested barcodes or an integrated RFID transponder.

Specialist for high and low hydrocarbon concentrations

To measure hard-to-detect hydrocarbons, you can fit the Draeger X-am 8000 with one of two high-performance PID sensors. The PID HC covers a measurement range of 0 to 2,000 ppm (isobutene). The PID LC ppb is particularly suited for a measurement range of 0 to 10 ppm (isobutene) with a high resolution in the range below 1 ppm.

For benzene-specific measurements, the X-am 8000 can be used with a pre-tube. The advantage: You only need one measuring device for this application, which significantly reduces the costs of purchasing, maintaining and transporting devices in use. The use of pre-tubes is supported by a built-in assistant.

Inductive charging protects against wear and tear

The X-am 8000 features inductive charging. This makes it easier to operate and increases the lifespan of the device. Issues like corrosion and contact problems in the charging cradle are a thing of the past. You can charge (outside of explosion-hazard zones) and measure at once, e.g, when using inside vehicles or on machinery.

The charging cradles can connect with one another, take up minimal space, and are compatible with existing Draeger X-am® series cradles.

M031-1111-0000 MicroRAE Wireless Gas Monitor, CSA/BLE/LEL.U/O2/CO by RAE Systems

The MicroRAE four-gas portable detector brings enhanced user-friendliness and flexibility to wireless gas detection. This enables continuous, instant visibility of safety threats for faster, more informed decisions, to protect workers, facilities, and the environment, and to optimize operations.

The MicroRAE is a wireless diffusion detector that simultaneously monitors up to four gases, including hydrogen sulfide, carbon monoxide, oxygen and combustibles (LEL). With its different wireless connectivity options the MicroRAE can deliver real-time instrument readings and alarm status to other wireless offerings such as ConneXt Plus, ConneXt Pro, ConneXt Loneworker4 and Safety Communicator.

• Man Down Alarm with real-time remote wireless notification1
• GPS module for location
• Bluetooth® low energy connection to a Smart Phone device for uplink data communication and device configuration
• Remote notification and Panic function
• Fully automated bump testing and calibration with AutoRAE 2

Industries

Personal protection and general safety and compliance in:

• Lone Worker Applications
• Oil and Gas
• Waste water treatment
• Utilities
• Telecommunications
• Firefighting
• Petrochemicals
• Construction

Optional Accessories

• AutoRAE 2 Automatic Test and Calibration Systems
• Gang Charger (5 units)
• Auxiliary filter
• Hand pump kit
• Truck mount charger

Features & Benefits

• Honeywell ConneXt compatible with Mesh and Wifi wireless configurations
• Compact and lightweight
• IP-67 water and dust-resistant case
• Strong, protective, concussion-proof design
• Real-time gas concentration readings, location, alarm and status enabled by state of-the-art wireless technology
• Unmistakable five-way local and remote notification of alarm conditions
• Short bump test and calibration time
• Global approval for worldwide acceptance
• Filtered LEL sensor options to inhibit sensor poisoning
• Compatible with Safety Communicator
• Device Management with Honeywell SafetySuite

GHS1296VY Environmental Dangerous Goods Laser Drum Labels (Vinyl), 100/Pkg by GHS Safety

GHS pre-printed drum labels come with your choice of pictorgram that meets the UN recommendations on the Transport of Dangerous Goods. These labels make an excellent choice for short production runs or re-labeling of product for transportation. These lebels are printed on a Laser Printable Paper or Vinyl stock with a permanent peel and stick adhesive. Use any desktop publishing package to quickly make your own transportation labels. Available in 8.5" x 14" size and packaged in bundles of 100 sheets.

0560 6220 622 Hygrometer with Pressure Indicator by Testo

In addition to temperature and humidity, the testo 622 also measures pressure. In the large, clear display, it shows the current measurement values as well as the date and time. It thus provides all important values at a glance.

• Hanging and standing bracket allows felxible positioning on a wall or desktop
• Large, optimally legible display
• Precise measurement of temperature, humidity and pressure
• All important values at a glance: current measurement values as well as date and time
• Calibration and adjustment of the measuring instrument possible on site with the optional calibration and adjustment software
• Adjustable calibration reminder function

24FC-B 24" OSHA Cart Fan, Black Fan by Schaefer

Schaefer OSHA compliant cart fans are designed to last many years. Schaefer portable circulation fans deliver quiet, powerful, efficient and long lasting air movement. Use these rugged portable fans in warehouses, work areas, loading docks, greenhouses, farms, and other locations where quality matters.

Features and Benefits:

• Matched direct drive motor and blades for highest achievable levels of airflow
• Powder coated steel guards for corrosion resistance and durability
• Energy efficient design for additional cost savings, draws as little as 1.6 amps
• Thermally protected, heavy-duty, maintenance free, 2-speed motors for long life
• Two-speed pull chain
• Ten foot, 115 volt grounded attached cord
• Mist rings available for additional cooling
• Two year warranty
• Made in the USA

72-5200-10 Eagle Portable Monitor, H2S / HCl by RKI Instruments

The Eagle Portable Monitor can simultaneously detect up to 6 different gases. With over 400 gas monitoring configurations, the unit can detect a wide range of toxic gases. RKI Industries offers long life protection for workplace safety and hazardous jobsites. With a reputation for advanced engineering and state of the art technology, the RKI Industries' Eagle One to Six Gas Portable Monitor is an industry leader in accuracy and affordability.

Features

The Eagle One to Six Gas Portable Monitor is available with a wide variety of exclusive features. The unit is capable of PPM/LEL hydrocarbon detection and for environmental use, has a methane elimination switch. The dual hydrophobic filters (available on some models) ensure quality control. To preserve the integrity and safety of the device, the portable monitor also has an adjustment lockout switch to prevent tampering. For quick and easy testing, the monitor offers autocalibration and single gas calibration.

The Eagle is housed in an ergonomic RFI, EMI, chemical, and weather resistant polycarbonate and polyester enclosure. It can operate in the rain or in 2 inches of water without damage. It features an ergonomically designed top handle to ensure durability.

Accessories and Options

IR Sensors are available for CO2, % LEL CH4 or HC, and % volume CH4 or HC. Each unit also has datalogging capabilities for research, evaluation, and analysis of worksite atmospheres. The unit comes standard with several accessories including a shoulder strap, alkaline batteries, a hydrophobic probe, a 5 foot hose, and an internal hydrophobic filter with most models. Optional accessories can be purchased to fully customize the portable monitor to meet specific needs including a datalogging kit, remote alarms, dilution fitting, Ni-Cad batteries, battery chargers, continuous operation adapter, extra loud buzzer, extension probes, and large internal hydrophobic filter.

Specifications

The Eagle has a battery life of up to 30 hours of continuous operation with alkaline or Ni-cad capability and a sensor life of approximately 2 years. Its standard weight is approximately 5 pounds with dimensions of 10.5 L x 5.9 W x 7 H. The formidable long life pump (with a life of approximately 6,000 hours) reaches up to 125 feet in range with filters and has a low flow pump shut off and alarm. The unit has a response time of up to 30 seconds for most gases, and features a double alarm of audible alerts at 85 dB and visual alerts of dual high intensity LEDs and a flashing display screen.

The display screen is an easy to read 4 x 20 LCD readout. The backlit display sits at the top of the unit for full visibility, and displays the readings and statuses of 4 channels simultaneously.

The portable monitor is rated as intrinsically safe and has a standard 2 year warranty for materials and craftsmanship.

*Please note we can only ship RKI products to customers within the United States

2811-724-002M EC 28 Gas Transmitter with MODBUS, Nitrogen Oxide (NO), Display by GfG

Advanced Technology

Wherever hazards are expected, the EC 28 transmitter and GfG s proven monitoring systems are the right choice for reliable surveillance. The ATEX-certified design, an integrated, Ex-proof buzzer, and bright alarm LEDs provide the highest safety in hazardous areas by including visual and audible alarms. The gas alarm not only alerts the person in the control room of hazards, but also the person on-site.

Easy handling

Smart sensor technology allows a user to install the transmitter or to replace a sensor within a few seconds just plug the sensor into the transmitter. Adjustments are done directly at the transmitter using touch keys or with the remote control (one-person calibration).

Remote Control RC2

Ammonia and hydrogen are lighter than air. With the transmitter installed close to the ceiling, GfG can provide permanently connected cables with plugs for the remote control, which allow the user to do all adjustments without having to climb a ladder. In addition, one remote control can be used for several transmitters, which helps cut costs and increase efficiency.

The remote control display is always identical to that of the transmitter, making inspection, service, and calibration considerably simple.

The remote control reads the current gas concentration and can be used as an external display.

Integrated Alarm Saves Money on Ex-proof Alarm and Wiring!

The EC 28 D model shows the current gas concentration on-site at the display of the transmitter and also at GfG s GMA controller.

The EC 28 DAprovides additional bright alarm LEDs and a buzzer avoiding costs for a separate Ex-proof horn and an Ex-proof light. You also save money on wiring to connect the controller and alarm devices.

In combination with GfG's flexible control units, the EC 28 provides various possibilities for reliable and cost-effective gas monitoring.

Reliable Measurement, Increased Safety, Minimized Cost of Operation

Accurate sensors and integrated temperature compensation provide the highest measurement accuracy. Low maintenance requirements and the long sensor life reduce your cost of ownership.

Features

• Reading of gas concentration at transmitter display
• Ex-proof visual and audible alarms
• ATEX certificate II 1 G EEx ia IIC T4 / II 2 G EEx em [ib] IIC T4
• One-person calibration at transmitter using touch keys or remote control
• Plug-in smart sensor sensor replacement without opening the casing

Advantages

• Concentration display at transmitter or at remote control
• ATEX II 1 G EEx ia IIC T4 / II 2 G EEx dem [ib] IIC T4
• Ex-proof visual and audible alarms
• No need for expensive Ex-proof buzzer or wiring
• Easy sensor replacement by means of plug-in smart sensors
• Long sensor life
• Low service requirement
• Permanent status and function display at transmitter
• Adjustments without opening the casing using touch keys or remote control; easy handling even for hardto-reach transmitter positions

M011-0013-000 MP186 BENZ (Red Boot) Kit by mPower Electronics

The NEO is one of the most advanced handheld VOC (Volatile Organic Compound) monitors available for ppb (parts per billion) detection. VOCs include a variety of chemicals such as benzene, alcohols, fuels, paint thinners, industrial solvents and many others, which can have short and long-term adverse health effects. Measuring these compounds is essential for worker protection in industries like oil & gas, fire & hazmat, pharmaceuticals, paints & adhesives, and many others. In addition, VOC monitoring is useful chemical process control, detecting leaks and other releases to the environment, and in measuring indoor air quality. The NEO offers several models from the most sensitive 1 ppb to a high range up to 15,000 ppm for different applications, and a filter tube version (NEO BENZ) for benzene-specific or butadiene-specific measurements. In addition to the standard continuous read-out, a Leak Detection and Repair (LDAR) mode is included. Novel designs of the Photo-ionization Detector (PID) and Ultraviolet (UV) lamp provide outstanding sensitivity, stability and reproducibility. Includes real-time data monitoring using mPower Suite software via cable to a PC or via Bluetooth to an Android phone or tablet.

Features, Functions and Benefits

• Smaller and lighter weight than comparable PIDs
• Most stable ppb-level PID on the market
• Outstanding linearity over full measurement range
• Easy charging on laptop or other USB port
• USB Micro Charger; combination USB-m charging and communications cable
• Powerful battery (run time 24 hours)
• Bluetooth Low Energy (BLE) connectivity standard
• Search Mode for LDAR Sampling
• Filter tube version for benzene- or butadiene-selective measurements
• Large backlight graphic display
• Lamp glow indicator
• Rugged, stainless-steel housing with rubber outer boot

*Please note we can only ship RKI products to customers within the United States