All Products

*Please note we can only ship RKI products to customers within the United States

0516 0012 Transport Case for Manifolds by Testo

• Robust case for the secure transport of your equipment
• Provides space for measuring instrument and accessories

T815/T850 Battery-operated Crawler System, Auto Drum by Troglotech

Our new Crawler System is battery-powered, robust and all you need for successful surveys

robust, safe, zero emmisions, lightweight

• 300 metre Auto Drum 4" to 24" Centred - up to 39"/1000m
• Pan & Tilt with 'auto-home' to simplify operation
• complete system fully waterproof to IP67
• full days operation from supplied batteries
• Wifi Video Streaming to customer
• reversing camera
• 25kg inc crawler
• Inclinometer
• Powerful Sonde
• Lithium-Ion powered
• 4mm Kevlar cable
• 300m as standard
• steerable as standard
• locking wheel bolts
• cable auto-layering
• Elevator

The complete system is Lithium-Ion battery-operated using the latest technology for long mission times and this means that the system is lightweight and highly portable - and very economic to use. As usual with Troglotech products, the system is highly robust with the crawler being machined from solid brass and stainless steel.

With a range of quick-release wheel sets (the wheel bolts are locked into position for security) you can survey the full range of pipe sizes from 4" (100mm). The crawler is steerable and has a reversing camera and lights so that a survey can be performed in either direction.

The batteries on the crawler have a long mission time (up to a full days inpection work) are quick-release and can be charged on-site or via a mains supply.

safety first

Our systems are all battery operated so there are no dangerous voltages or generators required. We use the latest battery technology to provide a full days work from two crawler batteries and a single charge of the control unit battery.

why battery power?

On most crawler systems up to 90% of the power is lost in the main cable. The cable can be increased in size with more copper to reduce the loss - but then the crawler needs to be bigger and heavier. In addition the cable voltage is often at lethal levels.

We have produced a crawler that carries its own power source meaning that the main cable does not conduct any power allowing it to be much lighter. The composition of our cable is mainly Kevlar and the three small conductors only carry signals at safe voltages below 5V.

a complete automatic crawler system for 4" to 36"

our crawler system competes with hugely expensive mainline crawler systems for the price of a pushrod system

Troglotech's designers worked on the early, bulky crawler systems at Pearpoint from the 80's to the 00's. These were huge systems that required generators, cranes, custom-built vans and needed a team to operate. Troglotech decided that this was completely the wrong method to provide what is essentially a video camera for inspecting pipelines

To this end, Troglotech designed a crawler that carried its own power supply using in custom-designed Lithium-Ion batteries. This removed the need for the heavy support equipment.

• No need for generators
• No cranes needed
• No heavy main cable - we use a 4mm Kevlar cable - 300 metres weighs less than 10kg
• No need for multiple crawlers - our crawler is used from 4" to 36"
• No need for large power supplies, our batteries are quick-release and weigh 2kg
• No need for heavy cable drums, our is automatic and weighs around 15kg
• No need for a custom-made van, our system will fit in the trunk of a sedan - ready for 300m survey of 36"

0646 0916 Self-adhesive Temperature Strips +71 to +110 °C (pack of 10) by Testo

testoterm thermometer strips are self-adhesive foils with temperature sensitive elements for temperature control and monitoring compressors, for example.

• Measuring range +71 °C to +110 °C
• Self-adhesive temperature strips
• Change color in 2 - 3 sec when thresholds are exceeded
• Ideal for monitoring temperature of small/moving objects / long-term monitoring of transport/storage temperatures

Includes:

testoterm temperature measurement strips for measurement ranges from +71 °C to +110 °C, 10 strips per booklet.

Please note: special prices available for orders exceeding 5 booklets.

90550-88 Dampen Bottom-Con Bimetal Thermometer 5" Dial 6" L Range 50-550F/10-290C by Digi-Sense

Accuracy is ±1% full-scale when stem is immersed 2" in liquids or 4" in gases (immerse models with a 2.5" stem length 2" in gases). Measured stem length from the top of the threads to the bottom tip of the stem. Stem dia is 0.25"; threaded connection is 1/2" NPT(M). All thermometers meet or exceed ASME B40.3 standards. Maximum environmental temperature for glass lens thermometers is 500°F (148°C).

• Dampened movement
• More economical than silicone gauges
• Greater temperature range than a silicone-filled gauges
• Anti-parallax dial for accurate readings
• Eliminate the risk of a leaking case and cross-contamination
• Rugged 304 stainless steel construction with a clear glass lens
• Recalibrate using the external reset screw
• Hermetically sealed per ASME B40.3 standard to prevent fogging and protect against tough environments

H-10-132-10 Amines Colorimetric Gas Detection Tube, 0.5 - 10 ppmv (10 Tubes / Box) by RAE Systems

RAE Systems colorimetric gas detection tubes enable quick, on-the-spot measurement of a wide range of toxic and combustible gases and vapors. RAE Systems tubes are easy to read, and provide a sharp, clear color change directly corresponding to the concentration of gas present. RAE Systems tubes are compatible with the RAE Systems piston hand pump, a reliable way to draw samples of an exact volume required for the most accurate measurements.

Key Features

• Wide assortment of tubes available to detect over 300 gases and vapors
• Easyto use, even in multiple layers of gloves
• Easy-to-read with sharp,clearcolorchange
• No calibration or other maintenance required

Applications

• Oil and gas
• Chemicals and petrochemicals
• Agriculture and pestcontro
• Food and beverage production
• Environmental protection
• Fire service
• HazMat response
• Nationalsecurity

18100060-3B Gasbadge Pro Single Gas Monitor, O2, BRAZIL INMETRO by Industrial Scientific

Built to Industrial Scientific's highest quality and reliability standards, GasBadge® Pro provides a lifetime of gas hazard protection with more features than any other single gas monitor available. Interchangeable "smart" sensors enable the GasBadge Pro to be quickly adapted to monitor unsafe levels of oxygen or any one of the following toxic gases: carbon monoxide, hydrogen sulfide, nitrogen dioxide, sulfur dioxide, chlorine, chlorine dioxide, phosphine, ammonia, hydrogen cyanide and hydrogen. GasBadge Pro communicates directly via an infrared interface to optional accessories like the DSX Docking Station, Datalink and infrared printer to further simplify and automate calibration, function (bump) testing and data downloading. Standard STEL and TWA readings, and datalogging of up to one year of survey data are featured along with an event-logger that records the past 15 alarm events.

Housed in a rugged enclosure, the monitor is immune to RF, water resistant and extremely durable. A protective concussion-proof overmold protects the unit from extreme abuse in a variety of harsh industrial environments. It's simple and intuitive four-button navigation allows easy access to setup, operation and calibration functions.

• Interchangeable "smart" sensors monitor oxygen or any one of many toxic gases
• One-year data logging capacity (minimum)
• Standard STEL and TWA
• iNet® ready and DSX™ Docking Station compatible

*Please note we can only ship RKI products to customers within the United States

Part Number: 221L-80-100

2811-731-002M EC 28 Gas Transmitter with MODBUS, Sulfur Dioxide (SO2), Display by GfG

Advanced Technology

Wherever hazards are expected, the EC 28 transmitter and GfG s proven monitoring systems are the right choice for reliable surveillance. The ATEX-certified design, an integrated, Ex-proof buzzer, and bright alarm LEDs provide the highest safety in hazardous areas by including visual and audible alarms. The gas alarm not only alerts the person in the control room of hazards, but also the person on-site.

Easy handling

Smart sensor technology allows a user to install the transmitter or to replace a sensor within a few seconds just plug the sensor into the transmitter. Adjustments are done directly at the transmitter using touch keys or with the remote control (one-person calibration).

Remote Control RC2

Ammonia and hydrogen are lighter than air. With the transmitter installed close to the ceiling, GfG can provide permanently connected cables with plugs for the remote control, which allow the user to do all adjustments without having to climb a ladder. In addition, one remote control can be used for several transmitters, which helps cut costs and increase efficiency.

The remote control display is always identical to that of the transmitter, making inspection, service, and calibration considerably simple.

The remote control reads the current gas concentration and can be used as an external display.

Integrated Alarm Saves Money on Ex-proof Alarm and Wiring!

The EC 28 D model shows the current gas concentration on-site at the display of the transmitter and also at GfG s GMA controller.

The EC 28 DAprovides additional bright alarm LEDs and a buzzer avoiding costs for a separate Ex-proof horn and an Ex-proof light. You also save money on wiring to connect the controller and alarm devices.

In combination with GfG's flexible control units, the EC 28 provides various possibilities for reliable and cost-effective gas monitoring.

Reliable Measurement, Increased Safety, Minimized Cost of Operation

Accurate sensors and integrated temperature compensation provide the highest measurement accuracy. Low maintenance requirements and the long sensor life reduce your cost of ownership.

Features

• Reading of gas concentration at transmitter display
• Ex-proof visual and audible alarms
• ATEX certificate II 1 G EEx ia IIC T4 / II 2 G EEx em [ib] IIC T4
• One-person calibration at transmitter using touch keys or remote control
• Plug-in smart sensor sensor replacement without opening the casing

Advantages

• Concentration display at transmitter or at remote control
• ATEX II 1 G EEx ia IIC T4 / II 2 G EEx dem [ib] IIC T4
• Ex-proof visual and audible alarms
• No need for expensive Ex-proof buzzer or wiring
• Easy sensor replacement by means of plug-in smart sensors
• Long sensor life
• Low service requirement
• Permanent status and function display at transmitter
• Adjustments without opening the casing using touch keys or remote control; easy handling even for hardto-reach transmitter positions

Part Number: 103L-305

*Please note we can only ship RKI products to customers within the United States

24PF-B 24" OSHA Pedestal Fan, Black Fan by Schaefer

When you're tired of replacing damaged pedestals, use Schaefer OSHA compliant portable circulation fans with heavy-duty pedestal mounts, designed to last many years. Schaefer portable circulation fans deliver quiet, powerful, efficient and long lasting air movement. Use these rugged portable fans in warehouses, work areas, loading docks, greenhouses, farms, and other locations where quality matters.

Features and Benefits:

• Square, round or tripod pedestal for portability needs
• Matched direct drive motors and blades for highest achievable levels of airflow, rated up to 12,000+ cfm
• Powder coated steel guards for corrosion resistance and durability
• Energy efficient design for additional cost savings, draws as little as 1.6 amps
• Thermally protected, heavy-duty, maintenance free, 2-speed motors for long life
• Two-speed pull chain
• Ten foot, 115 volt grounded attached cord
• Mist rings available for additional cooling
• Optional wheel kit for square pedestal available by ordering FP-Wheelkit
• Two year warranty
• Made in the USA