All Products

72-5328RK Eagle Portable Monitor for LEL & PPM/CO/H2S by RKI Instruments

The Eagle Portable Monitor can simultaneously detect up to 6 different gases. With over 400 gas monitoring configurations, the unit can detect a wide range of toxic gases. RKI Industries offers long life protection for workplace safety and hazardous jobsites. With a reputation for advanced engineering and state of the art technology, the RKI Industries' Eagle One to Six Gas Portable Monitor is an industry leader in accuracy and affordability.

Features

The Eagle One to Six Gas Portable Monitor is available with a wide variety of exclusive features. The unit is capable of PPM/LEL hydrocarbon detection and for environmental use, has a methane elimination switch. The dual hydrophobic filters (available on some models) ensure quality control. To preserve the integrity and safety of the device, the portable monitor also has an adjustment lockout switch to prevent tampering. For quick and easy testing, the monitor offers autocalibration and single gas calibration.

The Eagle is housed in an ergonomic RFI, EMI, chemical, and weather resistant polycarbonate and polyester enclosure. It can operate in the rain or in 2 inches of water without damage. It features an ergonomically designed top handle to ensure durability.

Accessories and Options

IR Sensors are available for CO2, % LEL CH4 or HC, and % volume CH4 or HC. Each unit also has datalogging capabilities for research, evaluation, and analysis of worksite atmospheres. The unit comes standard with several accessories including a shoulder strap, alkaline batteries, a hydrophobic probe, a 5 foot hose, and an internal hydrophobic filter with most models. Optional accessories can be purchased to fully customize the portable monitor to meet specific needs including a datalogging kit, remote alarms, dilution fitting, Ni-Cad batteries, battery chargers, continuous operation adapter, extra loud buzzer, extension probes, and large internal hydrophobic filter.

Specifications

The Eagle has a battery life of up to 30 hours of continuous operation with alkaline or Ni-cad capability and a sensor life of approximately 2 years. Its standard weight is approximately 5 pounds with dimensions of 10.5 L x 5.9 W x 7 H. The formidable long life pump (with a life of approximately 6,000 hours) reaches up to 125 feet in range with filters and has a low flow pump shut off and alarm. The unit has a response time of up to 30 seconds for most gases, and features a double alarm of audible alerts at 85 dB and visual alerts of dual high intensity LEDs and a flashing display screen.

The display screen is an easy to read 4 x 20 LCD readout. The backlit display sits at the top of the unit for full visibility, and displays the readings and statuses of 4 channels simultaneously.

The portable monitor is rated as intrinsically safe and has a standard 2 year warranty for materials and craftsmanship.

*Please note we can only ship RKI products to customers within the United States

MCB3-A3C1REZ-42M MultiRAE Pro Pumped Portable Multi-gas Monitors - 10.6 eV ppb PID / LEL / CO + H2S / O2 / Gamma / Li-ion / Wireless / Accessories Kit / Confined Space and Calibration Kit (4-gas + 10 ppm Iso) by RAE Systems

The MultiRAE Pro is the industry's only portable wireless multithreat monitor. The MultiRAE Pro's ability to simultaneously detect gamma radiation and toxic industrial chemicals (TICs/TIMs) enables responders to reduce the equipment footprint and achieve greater agility when operating downrange.

The MultiRAE Pro's optional wireless capability improves safety by providing commanders and safety officers real-time access to instrument readings and alarm status from any location for better situational awareness and faster incident response.

Key Features

• All-in-one monitoring capabilities for radiation, VOCs, oxygen, toxic and combustible gases, up to 6 threat types at a time
• Over 25 interchangeable sensor options, including parts-per-billion PID and gamma radiation
• Wireless access to real-time instrument readings and alarm status from any location
• Unmistakable five-way local and remote wireless notification of alarm conditions
• Intelligent sensors store calibration data, so they can be swapped in the field
• Large graphical display with easy-to-use, icon-driven user interface

Applications

• Civil defense (search and rescue)
• Homeland security
• HazMat response
• Military
• Semiconductor manufacturing
• Environmental

Measuring Range: 0 to +2000 hPa

*Please note we can only ship RKI products to customers within the United States

0590 0009 Set Alligator Clips by Testo

Crocodile clips are practical when measuring electrical parameters, because you can clamp the cable with them. For mounting, the crocodile clips are simply attached to the Testo standard measuring cables (order-number 0590 0010) or other makes of measuring cables.

• CAT IV 600 V / CAT III 1000 V measurement category
• Maximum current: 10 A
• For attachment onto Testo standard measuring cables (order-number 0590 0010) or other makes of measuring cables
• Delivery quantity: 1 set of crocodile clips

Includes:

1 set of crocodile clips, CAT IV 600 V / CAT III 1000 V measurement category, maximum current 10 A.

Old Part Number: E1016250
New Part Number: E1016250

90550-40 Dampened Adjustable Angle Bimetal Thermometer, 3" Dial, 6" L/50-550F/10-290C by Digi-Sense

Accuracy is ±1% full-scale when stem is immersed 2" in liquids or 4" in gases (immerse models with a 2.5" stem length 2" in gases). Measured stem length from the top of the threads to the bottom tip of the stem. Stem dia is 0.25"; threaded connection is 1/2" NPT(M). All thermometers meet or exceed ASME B40.3 standards. Maximum environmental temperature for glass lens thermometers is 500°F (148°C).

• Dampened movement
• More economical than silicone gauges
• Greater temperature range than silicone-filled gauges
• Anti-parallax dial for accurate readings
• Eliminate the risk of a leaking case and cross-contamination
• Hermetically sealed per ASME B40.3 standard to prevent fogging and protect against tough environments
• Rugged 304 stainless steel construction with a clear glass lens
• Recalibrate using the external reset screw

GasAlertMicroClip X3 3-Gas Detector, O2/H2S/CO, Black, North America by BW Technologies

With that combination of benefits, it's no wonder the GasAlertMicroClip is the world's most popular multi-gas detector, serving as your trusted companion in hazardous environments - keeping you safe without weighing you down.

Plus, it's the first multi-gas detector with a rating of IP68 for unmatched water protection. So you can be confident it will stand up to challenging conditions.

Choose from two detectors, both with extended 18-hour battery runtime, one-button operation and Honeywell's rigorous approach to quality:

GasAlertMicroClip XL: low up-front cost with a two-year warranty.

GasAlertMicroClip X3: three-year warranty and a new oxygen sensor that extends overall operational life expectancy.

Use our unique advanced technology for safety, compliance and productivity.

• Advanced engineering for reliable battery performance
• Reflex Technology™ automated self-test function routinely checks the operating condition of the sensors to increase safety, up-time, and overall worker confidence
• Compact, lightweight and easy to use - no expertise required
• Flashing green IntelliFlash™ light for compliance at a glance

GasAlertMicroClip Standard Features:

• Guaranteed runtime for at least a 12-hour shift - down to -20°C - without compromising LEL detection of hydrogen, acetylene and other combustible gases
• Durable, rechargeable lithium polymer battery - tested to last in extreme environments
• Ergonomic and wearable - doesn't weigh you down
• Real-time gas concentrations shown on LCD
• Bright, wide-angle visual alarm bars
• IP68 rating ensures maximum protection against dust and water
• User-friendly, tamper-proof operation with just one button and intuitive LCD icons
• IntelliFlash™ light indicating detector has been bump tested and is monitoring correctly
• Self-test of sensors, battery status, circuit integrity and audible/visual alarms on startup
• Compatible with MicroDock II docking station for automated bump tests and calibration
• Compatible with Fleet Manager II software for reporting and fleet management
• Multi-language support in English, French, German, Spanish and Portuguese

New to GasAlertMicroClip X3:

• Five-year life expectancy - plus a three-year warranty
• An all-new oxygen sensor that operates consistently for five years - with no replacement costs for the life of the detector
• Superior cost of ownership - with minimized maintenance and maximized uptime

Part Number: MCX3-X0HM-B-NA

QFP1X10-3/4 Single 10" Cartridge Housing, 304SS by Quantrol

QFP1X Series housings are designed for demanding industrial and commercial applications. Heavy duty 316L stainless steel constructio nprovides maximum durability and corrosion resistance. Ring nut closure allows for easy access and quick cartridge changeouts. Available in 10, 20 and 30" lengths with flow rates up to 21 GPM to best fit your application requirements.

Features

• Designed for industrial and commercial applications
• Heavy duty cast head with mounting bracket
• Constructed of corrosion resistant 316L Stainless Steel
• 300 PSI @ 200 Fpressure rating
• Ring nut closure for easy cartridge change out (wrench included)
• Spring loaded knife edge bottom cup provides a positive seal
• Buna O-Ring seal
• 1/8" bottom drain with plug
• For use with double open end filter cartridges
• Maximum cartridge diameter 2.75"
• Made in the USA

H-D03-0009-000 RAEGuard 2 PID Transmitter Kit, UL, 0.01 - 100 ppm Isobutylene Equivalent by Honeywell Analytics

The RAEGuard 2 PID operates on 10 to 28 VDC and provides an analogue (4-20 mA) three-wire signal output, and RS-485 Modbus digital signal output. It is available in two different models, pumped or diffusion, to best fit your needs.

Calibration has been greatly simplified with the introduction of Electronic Auto-Zero patented by Honeywell.

The RAEGuard 2 PID is utilizing many of Honeywell's PID patents such as the Electronic Auto-Zero that guarantees an incomparable base line stability making it the best in class product.

Polynomial based calibration provides superior calibration linearity throughout the full range.

The RAEGuard 2 PID has a graphic display and LED light status indicator for fault and alarm conditions. In addition, low, high, and fault relays1 can be configured to trigger external alarms or process controls.

A magnetic key interface enables the detector to be calibrated and operational parameters adjusted with the explosion-proof enclosure in place.

MODEL OPTIONS: PUMPED OR DIFFUSION

• Pumped is used for sticky gas
• Diffusion is used for high humidity ambients

REDUCED MAINTENANCE COSTS

• Easy to remove sensor module in hazardous locations without use of tools

REDUCED LIFE COSTS

• Unique lamp design makes the product more robust and enables longer life time

AVAILABILITY

• Continuous VOC monitoring in hazardous and non-hazardous locations

PROVIDES FASTER RESPONSE TIMES

• The sample flow-through design powered by an internal diaphragm pump provides faster response times

ACCURATE READINGS

• Guaranteed by humidity compensation even in humid environments

ADVANCED TECHNOLOGY

• Patented pump duty cycle extending the sensor and lamp cleaning interval
• Patented Electronic Zero keeping the zero point stable
• Patented 3D sensor technology lower quenching effect - faster response to high concentration - lower RH response

SUITABLE FOR A WIDE RANGE OF APPLICATIONS

• Over 200 correction factors are pre-programmed and allow users to display readings of specific target gas

KEY APPLICATIONS AND THEIR VOCS

• Benzene in refinery analyser shelters
• Ammonia in industry
• Vinyl Chloride in chemical manufacturing
• Toluene or Ammonia in semi-conductor plants
• Solvent and chemicals storage
• Phenol and DME in pharmaceutical
• Toluene in printing
• Air quality
• Methyl Ethyl Ketone in paint spray booths
• Heat transfer fluids
• Acetone, Xylene, Phenol in medical, pathology, histology lab

25555 Si-RM3 Wireless Digital Manifold by Sauermann

The Si-RM3 manifold comes with two pressure probes that accurately measure high side and low side pressure and two temperature probes that are used to accurately and simultaneously provide real-time superheat/sub cooling calculations.

Si-Manifold software is provided that instantly displays condensation/evaporation temperatures for up to 126 refrigerants.

DEVICE KEY FEATURES

Smart wireless manifold probes for pressure and temperature measurements in a refrigeration system.

• Light and curved design for easy plug-in to facilities
• Dual valve system for simultaneous measurement and charge/discharge of refrigerant
• Built-in Schrader® cores for easy refrigerant charging
• Range up to 60 bar (870 psi)
• Reduce the use of cumbersome hoses
• Overmoulding for easy handling and protection
• Two temperature clamps
• Long range wireless connection 4.2 low energy

SI-MANIFOLD APP KEY FEATURES

General features

• Clear interface for easy reading in any condition
• Gauge, table or graphic visualizations
• Creation of measurements report with possibility to add pictures
• Report exportation in PDF, CSV and XML formats
• Data logging
• Chronometer function
• Free app for iOS and Android devices
• Minimum required versions: Android 4.4, IOS 8.0, BLE 4.0

Manifold features

• Superheat and subcooling real time calculation
• Configuration of superheat/subcooling target values
• Heating and cooling functions
• 126 refrigerant gases with favorite list

Vacuum features

• Vacuum measurement function
• Configuration of vacuum target value
• Temperature of water evaporation

Kit Includes

• 2 pressure probes. Ref: Si-RM1
• 2 temperature probes. Ref: Si-RM2
• Adjustment certificate
• Simplified User Manual
• 6 AAA batteries
• Elastomer rings
• Soft case. Ref: Si-RM4

90494-01 Adjustable Angle Bimetal Thermometer, 3" Dial, 12" L/0-250F/-20-120C by Digi-Sense

Accuracy is ±1% full-scale when stem is immersed 2" in liquids or 4" in gases (immerse models with a 2.5" stem length 2" in gases). Measured stem length from the top of the threads to the bottom tip of the stem. Stem dia is 0.25"; threaded connection is 1/2" NPT(M). All thermometers meet or exceed ASME B40.3 standards. Maximum environmental temperature for glass lens thermometers is 500°F (148°C).

• Greater temperature range
• Anti-parallax dial for accurate readings
• Hermetically sealed per ASME B40.3 standard to prevent fogging and protect against tough environments
• Rugged 304 stainless steel construction with a clear glass lens
• Recalibrate using the external reset screw

G02-B020-000 ToxiRAE Pro PID Personal Monitor - 9.8 eV PID Lamp, Datalogging, Rechargeable Battery, Rubber Boot by RAE Systems

The ToxiRAE Pro PID is the world's smallest volatile organic compound (VOC) monitor. Featuring RAE Systems' next-generation PID sensor, the ToxiRAE Pro PID can quickly detect and accurately monitor over 300 VOCs. The ToxiRAE Pro PID provides safety professionals wireless remote access to real-time instrument readings and alarm status for better visibility and faster incident response. With an onboard library of 190 correction factors, the ToxiRAE Pro PID can be programmed to automatically read in equivalent units of the specified compound.

ToxiRAE Pro PID comes with

• ToxiRAE Pro PID monitor with sensor and wireless option as specified, rechargeable battery, alligator clip, and protective rubber boot installed
• Charging and PC communication cradle
• PC communication cable
• AC adapter (100 to 240 V, 50/60 Hz AC to 12 V DC)
• Calibration adapter
• Combined instrument / sensor cap removal tool
• Quick Start Guide
• CD with documentation
• CD with ProRAE Studio II monitor configuration & data management software
• Technical Note TN-106 with ionization energies and correction factors for 300+ VOCs (Industrial Hygiene versions only)
• Calibration and test certificate
• Warranty/registration card

Key Features

• Wireless access to real-time instrument readings and alarm status from any location
• Unmistakable five-way local and remote wireless notification of alarm conditions
• Largest display in its class
• Continuous datalogging
• On-board correction factor library for 190 compounds
• Easy to use
• Reliable, rugged, and intrinsically safe

Applications for Industrial hygiene and safety

• Chemical plants
• Government health, Safety, Security, and environmental agencies
• Hazardous materials teams, first responders
• Oil and gas
• Pharmaceutical plants

Applications for Environmental applications

• Environmental consulting
• Soil remediation

Part Number: 58L-439

2811-731-001 EC 28 Gas Transmitter with Sensor, Sulfur Dioxide (SO2), No Display by GfG

Advanced Technology

Wherever hazards are expected, the EC 28 transmitter and GfG s proven monitoring systems are the right choice for reliable surveillance. The ATEX-certified design, an integrated, Ex-proof buzzer, and bright alarm LEDs provide the highest safety in hazardous areas by including visual and audible alarms. The gas alarm not only alerts the person in the control room of hazards, but also the person on-site.

Easy handling

Smart sensor technology allows a user to install the transmitter or to replace a sensor within a few seconds just plug the sensor into the transmitter. Adjustments are done directly at the transmitter using touch keys or with the remote control (one-person calibration).

Remote Control RC2

Ammonia and hydrogen are lighter than air. With the transmitter installed close to the ceiling, GfG can provide permanently connected cables with plugs for the remote control, which allow the user to do all adjustments without having to climb a ladder. In addition, one remote control can be used for several transmitters, which helps cut costs and increase efficiency.

The remote control display is always identical to that of the transmitter, making inspection, service, and calibration considerably simple.

The remote control reads the current gas concentration and can be used as an external display.

Integrated Alarm Saves Money on Ex-proof Alarm and Wiring!

The EC 28 D model shows the current gas concentration on-site at the display of the transmitter and also at GfG s GMA controller.

The EC 28 DAprovides additional bright alarm LEDs and a buzzer avoiding costs for a separate Ex-proof horn and an Ex-proof light. You also save money on wiring to connect the controller and alarm devices.

In combination with GfG's flexible control units, the EC 28 provides various possibilities for reliable and cost-effective gas monitoring.

Reliable Measurement, Increased Safety, Minimized Cost of Operation

Accurate sensors and integrated temperature compensation provide the highest measurement accuracy. Low maintenance requirements and the long sensor life reduce your cost of ownership.

Features

• Reading of gas concentration at transmitter display
• Ex-proof visual and audible alarms
• ATEX certificate II 1 G EEx ia IIC T4 / II 2 G EEx em [ib] IIC T4
• One-person calibration at transmitter using touch keys or remote control
• Plug-in smart sensor sensor replacement without opening the casing

Advantages

• Concentration display at transmitter or at remote control
• ATEX II 1 G EEx ia IIC T4 / II 2 G EEx dem [ib] IIC T4
• Ex-proof visual and audible alarms
• No need for expensive Ex-proof buzzer or wiring
• Easy sensor replacement by means of plug-in smart sensors
• Long sensor life
• Low service requirement
• Permanent status and function display at transmitter
• Adjustments without opening the casing using touch keys or remote control; easy handling even for hardto-reach transmitter positions

Sperian Biosystems PhD6 Multigas Detector

The Biosystems PhD6 Multigas Detector is the latest development in compact multigas detection systems. The detector is proven to be compact, efficient, and cost effective. With dual alarm systems featuring ultra-loud audible indicators and ultra-bright LED visual indicators, users and those nearby are always notified when potential hazards may be present. When developing this detector, the engineers at SperianProtection Instrumentation also developed an express docking station that would reduce calibration time and labor costs. The detection and docking station help users meet record keeping requirements and reduce the risks of human error. With the SperianBiosystems PhD6 Multigas Detector, users can rest assured that they are receiving the very best in gas detection technology.

Key Features

The Biosystems PhD6 Multigas Detector is compatible with over 19 sensor choices including:

• PID
• IR-CO2
• IR-CH4
• Conventional LEL
• Oxygen
• 15 different toxic gas sensors

The gas detector is encased in a durable solid polycarbonate case with a rubber over mold for easy handling. It has an interchangeable battery pack with both Alkaline and Li-Ion rechargeable batteries. Both battery types offer up to 24 hour run times. The unit features dual audible alarms at 92 decibels and front and side ultra-bright LED visual alarms to ensure that the user and those nearby are always notified of possible hazardous conditions. For easy interpretation, the detector has an easy to read status bar and large LCD display that notifies users of the device s functionality and calibration due date. Using the menu options, users can easily adjust a variety of the instrument s settings.

Automatic Docking Station

When developing the PhD6 Multigas Detector, product developers also created an automatic docking station (Biosystems IQ6 Express Dock) to be fully compatible with the detector. The docking station aims to reduce labor time and costs by fully automating certain aspects of instrument maintenance including calibration, functionality testing, and record keeping. Using the Express Dock, users can maintain compliance with recordkeeping requirements by simply docking the detector in the station. The station will automatically perform a variety of operations without user intervention.

Sperian Protection Instrumentation and Honeywell

Sperian Protection Instrumentation is a global leader in personal safety equipment. The company was recently acquired by Honeywell, another global leader in technology and innovation. As a Fortune 100 company, Honeywell has a vested interest in maintaining its reputation as a developer of efficient and reliable safety equipment. Sperian Protection Instrumentation helps to expand Honeywell s personal safety offerings while advancing their position in the American market. By purchasing a product by Sperian and Honeywell, customers can be assured they are receiving the very best in safety technology and equipment.