All Products

Lumidor MiniMAX XT Personal Detector

MiniMAX XT is technically crafted to be, quite simply, the easiest and most cost effective to use single gas on the market. Utilizing patented sensing technologies, the MiniMAX XT provides 24/7 user confidence. That means solid, reliable, continuous protection always.

Lumidor identified that the market demanded more than tiny good looks in a single gas detector. Our customers said that in addition to a small and rugged design, single gas monitors must offer comprehensive sensor options, simple operation and most importantly, reliable and accurate readings without false alarms triggered by common radio interference.

Simple one button operation reduces time consuming and costly training issues. Our unique Temperature Compensation and Cell Output Decay Compensation features ensure improved accuracy across wide temperature ranges, providing our 2 year, no calibration needed facility.

Cost Effective

• No calibration required
• Unit may be calibrated if site procedures necessitate
• Remaining lifetime display enables planned replacement
• 24 month continuous operation
• Low cost investment

Easy to use

• Out-of-the-box solution
• Provided with an interactive Product Guide
• One button operation

Excellent EMC / RFI performance

• No false alarms due to common radio interference or cell phones
• Complies with toughest industrial standards for RFI immunity and EMC compatibility

Reliable operation

• Uses patented SureCell (CO and H2S only) and Reflex* technology
• Stable and accurate gas readings
• Intrinsically safe

Compact Design

• Small ergonomic design
• Lightweight
• Comfortable to wear

Durable housing

• Rugged and impact resistant
• Weather resistant

Versatile clip design

• Clips anywhere
• Optional crocodile clip design

Large Display

• Battery life status
• Actual gas reading during alarm
• Peak reading and when it occured
• Remaining lifetime
• Alarm status
• Test status

Demanding Alarms

• Distinctive two-tone alarm
• Rapid flashing alarm alerts user of danger
• Vibrating alarm
• Low battery alarm - indicates unit nearing end of life

MCXL-000M-Y-CN GasAlertMicroClip XL Detector, Carbon Monoxide (CO) - Yellow Housing, CN Version (China/New Zealand) by BW Technologies

The easy to wear, slim and compact GasAlertMicroClip provides affordable protection from atmospheric gas hazards. For standard operation with features you can count on, opt for the GasAlertMicroClip XT. For extended battery life, especially in cold weather, choose the GasAlertMicroClip XL. Both offer visual compliance at a glance with the flashing, green IntelliFlash™. Easy onebutton operation reduces training time and lets workers focus on the job at hand. For simple, cost-effective management of your records, calibration and bump testing, choose BW's MicroDock II automatic test and calibration system and Fleet Manager II software.

• Easy and comfortable to wear; thin and lightweight
• Easy operation and straightforward training with one-button simplicity
• Easy visual compliance with flashing, green IntelliFlash™
• Easy and cost effective to own

Additional GasAlertMicroClip features:

• Choose the GasAlertMicroClip XL for cold weather performance
• IntelliFlash™ verifies operation and compliance to both the user and supervisor
• Tamper-proof, one button operation
• Powered by a rechargeable lithium polymer battery

Standard features of BW multi-gas products:

• Continuous LCD shows real-time gas concentrations
• Compact and lightweight design makes it comfortable to wear
• Water-resistant
• Simple automatic calibration procedure; compatible with BW MicroDock II automatic test and calibration station
• Full function self-test of sensor, battery status, circuit integrity and audible/visual alarms on start up
• Bright wide-angled visual alarm bars
• Built-in concussion-proof boot
• Multi-language support in English, French, German, Spanish and Portuguese
• Conveniently manage your fleet using Fleet Manager II

Part Number: MCXL000MYCN

5201-1029 GDC-150 Gas Sensor Transmitter, NEMA 1 Housing, TVOC (0-300 ppm) PID Sensor by Bacharach

The all new GDC-150 transmitter from Bacharach offers detection and protection for a wide range of hazards including toxic gases such as carbon monoxide (CO), oxygen depletion, combustible gases, refrigerant leaks and total volatile organic compounds (TVOCs). Analog interfaces allow the transmitter to be connected back to Bacharach's GDA Series of controllers (or any other gas detection controller), building management systems or control systems. The GDC-150 features 4-20 mA or 0-10 VDC linear output signals, an automatic thermal resetting fuse, RoHS compliant circuit boards and LED indicators for power and open loop.

The onboard alarm LED's indicate when alarm threshold values are exceeded. The unit can be ordered with an optional alpha numeric LED display that shows gas concentrations in real time while alarm relays alert personnel of potential dangers, avoiding incidents and potential hazards.

The GDC-150 is packaged in a rugged, polycarbonate housing for both indoor and outdoor applications. When leaks occur, the GDC-150 sensors respond quickly and accurately to protect people and property. Automated calibration and simple maintenance procedures performed in the field allow for continuous operation and assurance that areas are monitored and protected at all times.

MC-CK-DL Deluxe Confined Space Kit for the GasAlertMicroClip, GasAlertMicroClip XT, and GasAlertMicroClip XL versions

What comes with it?

Inside you will find:

• Regulator (REG-0.5)
• IR connectivity kit with Fleet Manager Software (GA-USB1-IR)
• Carrying strap (GA-ES-1)
• Test cap and hose (MC-TC-1)
• Manual aspirator pump kit with 1 ft probe (MC-AS01)
• Carrying case (MC-CK-CC)
• Auxiliary Filter Kit (MC-AF-K1)
• Leather carrying case (MC2-LC-1)

*Please note we can only ship RKI products to customers within the United States

*Please note we can only ship RKI products to customers within the United States

Gasman Personal Gas Monitor

For over 40 years, Crowcon Detection Instruments has produced state of the art gas detection devices for personal and industrial use. Building upon their reputation for reliable and innovative gas monitoring products, Crowcon introduces the Gasman personal gas monitor. Its lightweight and compact design is convenient for jobsites where workers need not be weighed down by excessive bulk and equipment. The unit conveniently clips to a pocket or helmet and operates continuously.

The Gasman personal gas monitor has numerous convenient features such as:

• One button technology
• Backlit LCD display
• Durable polycarbonate casing
• Quick response triple alert system
• Compact and lightweight design

Easy to Use

The Gasman s true one button technology is an ideal and simple design. The large glove friendly button is mounted on the front of the unit for easy access and controls all of the unit s programmable features. Also on the front, the Gasman s easy to read backlit LCD screen indicates gas readings and the battery status. The simple screen provides a clear indication of the unit s operation status. It will also alert the user 30 days in advance of when a calibration test is due. With a simple and intuitive design, Crowcon has produced a gas detector that reduces the complexities of workplace safety, and ensures workers in a straightforward manner that their equipment is on and operational.

Triple Alarm System

This portable single gas detection system features a triple alarm system that is sure to alert the user and anyone in the vicinity. The visible alarm utilizes a dual red and blue flashing LED light, and the unit houses an internal vibrating alert system. These two indicators allow for visual recognition in loud environments and working conditions. The alarm system also features a programmable audible alarm at 95 decibels. The unit is capable of a variety of alarm tones, and users can select which tone may be best for the individual workplace setting. The triple alarm system with multiple sensory indicators is sure to be noticed in almost any work environment.

Specifications

The Gasman single gas monitor is lightweight and compact, weighing less than 135 grams and with dimensions of 90 x 48 x 24 mm. The unit is available with a wide variety of gas sensors which feature various detection and alarm levels. The unit also features a quick response time of 20 seconds for flammable and toxic gases or 10 seconds for oxygen. Its datalogging feature has approximately 900 hours of storage and all events are time stamped. The battery life for this unit is incredible with 12 hours of runtime on a rechargeable battery or up to 2 years on a non-rechargeable battery.

2801-22-002 CC 28 Fixed Gas Transmitter with Gas Optimized Catalytic Sensor 0-100% LEL (MK 208-1), Benzene (C6H6), Display by GfG

Superior technology

In areas where combustible gas or vapor hazards may exist, GfG s new CC 28 combustible transmitter is the perfect choice for reliable area monitoring. With its proven design, this ATEX certified transmitter offers an integrated explosion-proof buzzer and bright-alarm LEDs for reliable warning of combustible gas hazards (even in hazardous locations). This superior design provides warnings for immediate personnel, and ensures entire plant safety.

Easy handling

Smart sensor technology allows easy installation. Sensor replacement takes only a few seconds-simply plug in the sensor. User adjustments are performed at the transmitter with simple touch keys, or with the optional remote control interface (one person calibration).

RC2 remote control

Several combustible gases are lighter than air. With the transmitter mounted close to the ceiling, calibration can be difficult. The remote control for the CC 28 allows you to perform calibration or zero adjustments without the need of a ladder or lift. A flexible cable connects the remote control to the transmitter and displays the same reading as the display on the transmitter. With the remote control inspection,service and calibration can be performed easily by one person.

The sensor and the integrated temperature compensation provide highest measurement accuracy.

Low maintenance requirements and long sensor life reduce your cost of ownership. Just sign a service contract and don t worry about any problems. We will service your system at regular intervals.

Models

Model CC 28D allows you to read the gas concentration both at the transmitter and at the GMA controller.With the RC2 remote control - the CC 28 is easy to use and to operate even if it is mounted at the ceiling.

Model CC 28DA provides additional warning with bright integrated alarm LEDs and a buzzer.

Features

• Full-featured smart transmitter for combustible gas measurement
• Non-intrusive calibration adjustment
• Expected sensor life of 5 years
• Increased safety design to reduce installation cost in potentially hazardous locations
• ATEX EEx dem [1b] IIC T4
• Proprietary, high performance combustible gas sensor
• Available in three configurations: Blind (no display), Display, Display with local alarms

Advantages at a glance

• Display of gas concentration at transmitter or remote control
• ATEX II G EEx dem [ib] IIC T4
• Ex-proof visual and audible alarms
• No need of expensive EX-proof buzzer or wiring
• Easy sensor replacement with plug-in sensors
• Long life sensor
• Low service requirement
• Permanent status and function display at transmitter
• Adjustments by means of touch keys or remote control without opening the casing
• Easy handling even at hard-to-reach accessible transmitter positions.

72-2102-H2-02 Beacon 200 Two Channel Wall Mount Controller, 115/220 VAC, for Two H2 Specific Channels by RKI Instruments

RKI Instruments is an industry leader in gas monitoring and detection devices. Understanding the unique needs of hazardous workplace conditions, RKI Instruments offers the widest selection of standard and toxic gas detection sensors. With an emphasis on reliability and dependency, their products are some of the safest and most dependable gas monitors on the market. In researching workplace safety solutions, RKI's research and development team used the latest microprocessor technology to develop the Two Channel Wall Mount Controller Beacon 200 Model, a gas detection system designed with the everyday hazards of dangerous work environments in mind.

Two Channel Wall Mount Controller

The Two Channel Wall Mount Controller Beacon 200 Model utilizes microprocessors and state of the art technology to ensure accurate gas detection and alert those nearby of atmospheric conditions. The unit is affordable, versatile, user-friendly, and easy to install. This model connects directly to long lasting RKI sensors for LEL level combustible gases, oxygen, and toxic gases. These sensors may be connected directly to the unit or may be wired remotely.

Two Channel Wall Mount Controller Beacon 200 Model Features

The unit features simultaneous atmospheric condition readout on 2 channels with 2 alarm levels per channel and a built in audible alarm system. The unit also houses 4-20 mA outputs and accepts any 4-20 mA transmitter input (24 VDC). The unit can also be wired with a variety of RKI Instrument sensors.

The Two Channel Wall Mount Controller Beacon 200 Model is housed in a wall mounting grey polycarbonate casing with a hinged cover. The NEMA 4X enclosure is waterproof, chemical resistant, and weather resistant ensuring maximum protection against potential environmental hazards that could damage safety equipment. It is user-friendly with 4 push buttons for setup, programming, and calibration. The unit also features 1 external push button for alarm reset.

The alarm system features an audible and visual alert system. The built-in audible alarm uses a 94 dB alert system, and the visual alerts feature 4 ultra-bright LED lights on the front cover. The alarms will alert users about potentially dangerous atmospheric conditions in addition to potential unit malfunctions.

Beacon 200 Model Specifications

The Two Channel Wall Mount Controller Beacon 200 Model features a backlit alphanumeric display that is easy to read and practical with 20 characters per line and a 4 line capacity. The wall mounted controller is approximately 10.5 H x 8.5 W x 6.3 D and is powered by 115 VAC or 24 VDC standard with an optional 230 VAC and an available battery backup option. The Two Channel Wall Mount Controller Beacon 200 Model is CSA Certified and comes standard with a 1 year warranty for materials and workmanship.

*Please note we can only ship RKI products to customers within the United States

3622-211 D-ReX PoS Gas Detector with 5 relays, Nitrous oxide (N2O) MK263-10, 0 - 1% vol. by GfG

Not all gases can be monitored directly at the measuring point. This may be because the maintenance of a remote sensor would be too complicated or because the target gas has to be broken down into detectable components first. This can be done using a pyrolyzer.

In these cases, the D-ReX PoS with its integrated pump is an ideal solution. The point of sampling (PoS) can be up to 100 feet / 30 meters away from the D-ReX. This also applies to the length of the recirculation hose.

Available Accessory:

• DIN rail
• PTFE hose
• Various particle filters
• Push-Pull plug-in adapter
• Angle braces

Features:

• 5x internal relays (form C, configurable)
• Smart sensors for more than 60 gases
• Hot-swappable smart sensor cartridge
• Tool-free maintenance
• Power-over-Ethernet (PoE) communication
• Web server for browser access
• Password-protected menu
• Interface: Analog outlet: 4 20 mA output; Digital: RS-485 (Modbus/RTU); 10/100 Mbit Ethernet (Modbus/TCP)
• Bright status and alarm LEDs
• Data logger to review sensor and alarm history
• Marked as FCC, CE, IC and UKCA

SST4-MINI-X3OMD-Y SST4 Portable Multi Gas Detector, Mini 3 Gas LEL NDIR/O2/CO/DUMMY by WatchGas

The SST4 Micro and SST4 Mini are four-gas devices designed with simplicity, size, and the user in mind. From use in the hot temperatures of the steel industry or Hazmat users to the extreme environments in the Oil and Gas industry. With a wide range of user options, the SST4 can be tailored for many use cases and applications.

As many industries move from single gas to a multigas approach, it is essential for end-user adoption. The SST4 Range is designed with simplicity, size, and with the user in mind. With its compact yet rugged design, the SST4 is there when needed. From use in the hot temperatures of the steel industry or Hazmat users to the extreme environments in the Oil and Gas industry. With a wide range of user options, the SST4 can be tailored for many use cases and applications. The device can be set up simply by using the WatchGas SST application, calibration, and bump test records. With Compliance Check, it has never been easier to manage, maintain, and ensure maximum uptime of your fleet of devices.

Applications

• Oil and gas upstream
• First responders
• Steel production
• Manufacturing
• Wastewater
• Shipping
• Ship building
• Power generation
• Shipping
• Power generation
• Telecommunications

Features and Benefits

• Display: With the largest LCD in its category the SST4 display ensures information is displayed clearly and allows users to make quick decisions. Four gases can be displayed with clarity and shown in PPM, %vol, mg/m3 and %LEL. Correction factors can be set through the WatchGas SST Application and allows for a one to one reading for the target gas required. With its Backlight it can be used in dark environments and will be illuminated in an alarm occasion.
• NFC: Near Field Communication built in as standard and allows for a wide range of solutions depending on your needs. Simply pair SST4 with the WatchGas SST Application to manage your fleet, bump, calibrate, assign, or download event logs and data logs.
• Wireless Charging: In dirty and harsh environments that gas detectors are often used in many charging connectors become damaged. SST4 has been designed with induction charging allowing for simple and quick charging with no risk of cables and ports becoming damaged and failing. A complete charge cycle takes 2-3 hours. Different charging accessories are available within the portfolio.
• Sensor: Using the latest in Solid State Technology our H2S, CO, O2 and SO2 offer stability and reliability over extreme temperatures and conditions. Toxic sensors have a smaller form factor and with the removal of liquid electrolyte provides a long-lasting sensor. A choice of 3 different LEL sensors allows the buyer to tailor the device to your application and allows longer runtimes compared to conventional technology.
• Alert: As a safety device it is essential that the device clearly notifies users of the presence of gas. The SST4 has a 95dB alarm at 30 centimetres which is the industry standard and is required in loud industrial environments. High, HighHigh, Low, LowLow, TWA and STEL alarms can be configured by the user and updated directly on the device through the SST Dock or WatchGas SST Application.
• Rugged: Designed with the harshest environments in mind the SST4 offers an IP rating of 65-68. The casing is a double shot housing that gives extra robustness while not compromising on quality. The screen protectors located either side of the display protect the LCD from scratching.

S01-A120-200 ProRAE Guardian CD by RAE Systems

ProRAE Guardian is real-time gas, radiation, dust, weather, and physiological monitoring software that connects, integrates, and relays data from various wireless monitors to a centralized system. The command center instantly displays device status, alarm, and sensor reading information, integrating all information in a single dynamic view. ProRAE Guardian real-time monitoring empowers safety professionals with instant updates of monitor data for making intelligent time critical decisions.

ProRAE Guardian advanced device management enables operational managers to manage their fleets of monitors and track worker device assignments. In addition, it can automate several common tasks to improve worker productivity along with the flexibility to define custom alerts specific to a work environment.

Key Features

• Real-time display of device status, sensor readings, and alarms
• Integrated Google Maps show precise instrument locations with alarm status
• Datalogging in text and graphical formats, and includes boolean filters
• Supports all RAE Systems wireless enabled products
• Supports up to 512 instruments simultaneously
• Dashboard for overall system status
• Fleet management for instruments
• Activity automation for calibration, bump test and report generation
• Custom rules for alarm notifications
• Remote notifications via email and text messages
• Worker-instrument association
• Security features for data protection and networking
• Leasing option for short duration projects
• Software Development Kit for integration with external systems
• Centralized monitoring of wide areas
• Simultaneous monitor data aggregation
• Increased situational awareness
• 24/7 monitoring of exposure conditions
• Early warning and tracking of hazardous threats
• Distributed Control Systems integration for process automation
• Management and control of monitors and detectors
• Increased productivity through task automation
• Lower deployment costs

SST1-H2HR SST1 Single Gas Detector, H2 0-20,000ppm High Serviceable (Hydrogen) by WatchGas

The SST1 Serviceable offers one of the most cost-effective solutions on the market. With its 3-year replaceable battery and solid polymer sensor technology, the SST1 offers a compact and modular design without compromising its ruggedness. The SST1 Serviceable can be configured to your needs with one simple tap of the NFC and paired with the WatchGas Application. Monitoring for Low, High STEL, and TWA the SST1 will indicate any immediate risks and long-term exposure to toxic gases. SST1 is the platform that will allow us to expand on up to 8 different gases, so this is the ideal solution for your application.

Applications

• Oil and gas upstream
• Oil and gas downstream
• Contractors
• Site maintenance
• Turn arounds and shutdowns
• Boiler rooms
• Steel plants
• Laboratories
• Shipping
• Power generation
• Mining

Features and Benefits

• Easy Setup: Near Field Communication (NFC) is built in as standard and allows for a wide range of solutions depending on your needs. Simply pair with the WatchGas SST App to manage your fleet - bump, calibrate, assign or download event logs.
• Sensor: Using the latest in Solid Polymer Sensor Technology, our different target gases offer stability andreliability over extreme temperatures and conditions. With its smaller form factor and the removal of traditional Electrolyte, it is setting a new standard in the single gas market.
• Display: With the largest LCD in its category, the SST1's display shows the Real Time Gas Reading, TWA and STEL alarms. This allows for the user to make quicker decisions in a gas alarm environment. Bumper screens on either side of the LCD provide anti scratch protection ensuring the clearest of readings.
• Rugged: Designed with the harshest environments in mind, the SST1 offers an Ingress Protection rating of 67-68. The casing is a double shot housing that gives extra robustness while not compromising on quality. The screen protectors located on either side of the display are to protect the LCD from scratching and is required due to its smaller sensor profile.
• Alert: As a safety device it is essential that the device clearly notifies users of the presence of gas. The SST1 has a 95dB alarm at 30 centimetres which is the industry standard and is required in loud industrial environments. High and Low alarms can be configured by the customer and automatically updated directly on the device or through the SST Dock.
• Serviceable: The SST1 real time monitor is a cost efficient solution for users with STEL, TWA and real time requirements. SST1 real time allows users to replace battery and sensors to maximize the lifetime of the unit. Press and hold the button for 10 seconds to reset TWA/STEL for worker shift change.

ULTIMA® X5000 Gas Monitor (A-X5000) by MSA

The ULTIMA® X5000 Gas Monitor is the future of gas detection for oxygen, toxic and combustible gases. MSA XCell® gas sensors with TruCal® technology offer calibration cycles up to 24 months (local calibration respected). The gas transmitter's advanced, multi-lingual OLED display is easy to read and the unique touch-screen interface makes it simple to navigate.

FEATURES:

• TruCal* technology actively monitors the sensor integrity and compensates for environmental factors that cause regular electrochemical sensors to drift.
• Organic LED (OLED) display and bright status LED's for extreme visibility
• SafeSwap enables safe and quick replacement of gas sensors without turning off the instrument
• Dual sensor capability doubles the sensing power with half of the footprint of a single gas transmitter
• Bluetooth wireless technology allows mobile device to act as an HMI screen and controller. The X/S Connect App is designed with high security standards and provides real-time information to your mobile device
• Unique touch-button interface for an intuitive user experience and tool-free operation.
• Identical footprint and wiring as the ULTIMA X series makes retrofits simple using the existing conduit and wiring as well as an integral mounting bracket
• Cloud connectivity available with FieldServer ProtoAir FGFD Gateway
• Three-year warranty on XCell sensors
• TruCal* technology actively monitors the sensor integrity and compensates for environmental factors that cause regular electrochemical sensors to drift.
• An industry first, Diffusion Supervision warns if sensor inlet becomes blocked and unable to detect gas
• Organic LED (OLED) display and bright status LED's for extreme visibility
• SafeSwap enables safe and quick replacement of gas sensors without turning off the instrument
• Dual sensor capability doubles the sensing power with half of the footprint of a single gas transmitter
• Bluetooth wireless technology allows mobile device to act as an HMI screen and controller. The X/S Connect App is designed with high security standards and provides real-time information to your mobile device
• Unique touch-button interface for an intuitive user experience and tool-free operation.
• Identical footprint and wiring as the ULTIMA X series makes retrofits simple using the existing conduit and wiring as well as an integral mounting bracket
• Cloud connectivity available with FieldServer ProtoAir FGFD Gateway

TX2-5G111 Tango TX2 Dual Gas Monitor, English by Industrial Scientific

• Protect workers, reduce false alarms, and spend less time managing your gas detector fleet with the Tango TX2.
• The Tango TX2 is the most accurate two-gas monitor featuring individual sensors that increase alarm accuracy.
• A two-year runtime and replaceable battery simplify gas detection management by eliminating the need for charging infrastructure.