All Products

3173RK Large LCD Conductivity/TDS/Temperature Benchtop Meter Kit by Jenco

Conductivity/TDS/Temperature benchtop meter, with an extra large LCD display, adjustable cell constants K=0.1, 1.0, 10.0, programmable temperature co-efficient and reference temperature. Available with RS-232C computer interface. Battery or 115/230 AC powered. CE approved.

Includes:

• 3173R Large LCD Conductivity/TDS/Temperature Benchtop Meter
• K=1 Cond. Probe
• 6230D115 AC Adapter
• 007N Electrode Arm Holder

• Clear, large LCD display (4 1/8 x 3 1/16 in.).
• Displays conductivity and temperature, or tds and temperature readings at the same time.
• Accepts 2-wire conductivity cells with adjustable k=0.1, k=1 and k=10 cell constants for improved flexibility and accuracy.
• Auto or manual ranging of 3 conductivity ranges are available for improved usability.
• Convenient one point calibration. calibration data is stored in memory and is ready for use on power up.
• Readings are automatically compensated for temperature (ATC). meter automatically switches into manual
• compensation when temperature probe is not present.
• Automatic lock mode is available to lock in stable readings.
• Intuitive operation with membrane keypad with tactile and audio feedback.
• Splash resistant case is made with durable, reinforced plastic for added protection. protective covers for connectors are included.
• Large LCD is offset for improved protection against unintentional damage.
• Smaller case does not clutter valuable desk space.
• RS-232 computer interface.
• 8pin DIN connector for conductivity cell & 10k thermistor.
• AC adaptor or battery power.

6250KA Handheld pH/mV/Ion/Temp. Meter Kit by Jenco

pH/mV/ION/Temp. microprocessor handheld meter in splash proof case with RS-232-C IBM compatible communications interface, BNC pH/mV/ION connector and 8-pin DIN ATC connector. AC/DC power. CE Approved.

Includes:

• 6250 Handheld pH/mV/Ion/Temp. Meter
• 600P pH electrode, 3-ft cable, BNC connector, Max Temp. 60° C
• 6250F Carrying case

• CE approved
• RS-232c output
• Power down backup
• Splash resistant/watertight case
• Battery/ac adaptor
• High 50/60hz noise rejection
• High resolution ,4 1/2 digit readout
• Highly reliable mechanical touch keys with audio feedback
• Programmable resolution to 0.001/0.1 pH,1/0.1 mv
• Direct readout in ion concentration (calibration units conform to that of the calibration standard solutions)

MiSC-LED MiScope Slim Light Table by Zarbeco

The portable 4 x 5 inch illuminated light table works with a rechargeable lithium battery or the USB/AC adapter.

The light table is suitable for viewing transparent objects that need bottom lighting to see.

Use with any MiScope or MiScope megapixel 2 that has a switch to turn off the LEDs (MISC-SW; MISC-IR; MISC-UV; MISC-UVIR; MISC-MP2; MISC-M2P-IR; MISC-MP2-UV; MISC-MP2-WUVIR).

View slides, detect watermarks, or view through any transparent object.

Features

• portable, lightweight
• powered by rechargeable lithium battery or USB/AC adapter

Applications

• Forensics (ie watermarks)
• Laboratory to view slides
• Quality inspection of transparent samples

M-700513 Manning AirScan IRF9 Transmitter, R513A 0-3,000 ppm, stainless steel enclosure by Honeywell Analytics

The industrial refrigeration industry is changing rapidly. The manufacture of R-22 and other HCFCs are being phased out. Influential organizations such as EPA and CARB (California Air Resources Board) are enforcing lower level monitoring requirements. Manufacturers of cooling systems are introducing new equipment that runs on 407a, 422d, 410a, HFO-1234yf, NH3 and CO2. In step with these changes, EPA fines have escalated for anyone venting ozone-depleting gases. What's your best move? Contact Honeywell Analytics to learn how to detect for these new refrigerants. With Honeywell Analytics, you can green the environment—and green your bottom line.

Honeywell Analytics Infrared monitoring solutions are designed to help your plant operate more efficiently and cost effectively. Unlike sample draw systems which take longer to pinpoint a gas leak, our diffusion sensing technology cuts downtime and the cost of expensive refrigerant replacement. Other technological advantages include flexible standalone or networkable configurations, long operating life expectancy (10+ years); fewer calibration requirements; self-monitoring SensorCheck technology; EPA compliance including newer requirements set by CARB (California Air Resources Board); and accurate, reliable response to the most common refrigerant gases used in industrial or commercial processes.

Refrigerant Specific

• Rapid response to refrigerants including R-404a, R-22, R-507a, R-134a, R-407a, R-410a, R-422d, HFO-1234yf, NH3 and CO2
• Internal monitoring of 4/20 mA loop circuitry continuously
• Compliant with new monitoring standards set by CARB

Diffusion-Design Sensor

• Has no moving parts and doesn't require pumps or filters
• All points of detection can be monitored continuously at an affordable cost

Versatility

• Can be used with any Honeywell Analytics readout
• Standard range of 0-3,000 ppm, can be rescaled for lower trip points
• Provides a linear output of 4/20 mA as a function of refrigerant concentration
• Simple, real-time calibration eliminates maintenance downtime
• Automatically adapts to fluctuating temperatures

Long-Lasting Performance

• Unique internal reference channel compensates for dust particles, source degradation, humidity and temperature fluctuation, food odors, chemical cleaners, etc.

ATMOS™ Technology

• Allows for operation down to -60°F and in condensing humidity environments or during washdown
• Automatically adapts to its environment and provides accurate and reliable performance under the harshest conditions

SensorCheck™ Technology

• Checks operating parameters of sensors and sends a notification output signal if an anomaly is identified
• Tests the sensor every 24 hours for electrical viability
• Indication can be detected by a Manning gas monitor or PLC

Housing

• High-mass metal bench provides structural and thermal stability and greater immunity to vibration
• Superior EMI/RFI shielding

Applications

• Banana and Produce Rooms
• Beverage Plants
• Wineries and Breweries
• Confined Space Entry
• Food Processing
• Gas Bottling Plants
• Ice Rinks
• Product Coolers
• Rack Houses
• Refrigeration Systems
• Supermarkets

726-101-P1 Eagle 2 Portable Monitor for LEL & PPM/O2/H2S/CO/SO2/VOC's (0 - 50 ppm, PID) by RKI Instruments

Continuing in its legacy of durable and reliable gas detection and monitoring systems, RKI Instruments is proud to offer a new product in its popular Eagle portable gas detector series. The Eagle 2 can monitor up to 6 different gases and is equipped with several exclusive features that can only be found with the Eagle series. In addition, its large glove friendly push buttons and LCD screen ensure an ease of use when onsite. Rated intrinsically safe, the Eagle 2 is equipped with state of the art technologies that are not available with other competitive gas detectors and monitors.

Specialty Sensors

The Eagle 2 has a variety of available specialty sensors. Workers can use a photoionization detector for low or high range VOC detection and Fence Electrode Technology for humidity and contamination resistance. An infrared sensor is available for Co2, % LEL CH4, % Volume CH4, % LEL HC, and % Volume HC. Thermal conductivity sensors are available for % Volume H2 and % Volume CH4. The unit is also compatible with the smart plug and play toxic sensors for the detection of NH3, AsH3, CI2, HCN, PH3, and SO2. With the wide variety of sensors and gas detection available, the Eagle 2 can be customized to meet almost all worksite gas detection needs.

Exclusive Features

The monitor has a long internal pump that can draw samples for up to 125 feet. The pump features a low flow auto shut off and alarm. This allows operators to respond swiftly from a safe distance. The unit is multilingual with 5 different language preferences, and features an alkaline battery life of 18 hours or a NiMH life of 20 hours. To protect the integrity of the device and the configurations, the unit can be password protected. The Eagle 2 also has standard data logging capabilities for easy research, evaluation, and site monitoring. To reduce calibration costs and time, the unit features an automatic calibration option and a single gas calibration option.

The Eagle 2 is heavily protected from environmental conditions by a weather proof, chemical resistant RFI/EMI coated high impact polycarbonate/PBT blend enclosure. The enclosure also renders the unit water and dust resistant. Because of the enclosure, the Eagle 2 can function in 2 inches of water without leakage.

Eagle 2 Specifications

The portable and durable unit is lightweight at less than 4 pounds. Its dimensions are suitable for convenient carrying (9.5?L x 5.25?W x 5.875?H), and it features a conveniently placed durable top handle. The large easy to read display has a polyurethane overlay backlights on demand and when the alarm is activated. The 2 alarm channels are fully adjustable for the user and can be password protected. With a 95 dB buzzer and 4 high intensity LEDs, the alarm is sure not to be missed. The Eagle 2 is standard with a 2 year warranty for material and workmanship and a 1 year warranty for PID sensor.

*Please note we can only ship RKI products to customers within the United States

0699 6446/2 6446 Compressed Air Meter by Testo

The compressed air counters testo 6441 to testo 6444 are designed for the measurement, monitoring and recording of compressed air consumption, and therefore also for the determination of leakages in compressed air systems, consumption-based allocation of costs and the implementation of peak load management. The compressed air counters testo 6441 to testo 6444 record norm volume flow according to the calorimetric principle, which means the measurement procedure is independent of the process pressure and does not cause a permanent pressure drop.

The version testo 6447 offers everything the testo 6446 provides, in addition the removal of the probe under pressure is possible (patented screw fitting). The larger nominal values refer especially to important compressed air pipelines, often the main supply line after preparation.

• Measurement of norm volume flow in the measuring range 6.7 to 27500 m³/h (DN65 to DN350 or 21/2"-10")
• Exchangeable fitting: Probe removal under pressure possible (testo 6447 only)
• Material selectable between galvanized steel and stainless steel
• Highest flexibility thanks to different signal outputs: Analog output 4 to 20 mA (4-wire), Pulse output, 2 switch outputs (parameterizable: consumption or volume flow-dependent, opener, closer, hysteresis, window)
• Built-in totalizer, even without additional analysis unit
• Operating menu with LED display
• Cleanable sensor

7460NS/7465NS Intrinsically Safe Dual Angle Flashlight Rechargeable (Orange) by Western Technology

The 7465 LED - Intrinsically Safe Rechargeable Flashlight is a lightweight, rechargeable, hand-held work light with a 210 degree articulating head that rotates a full 360 degrees. This flashlight features an extremely strong magnet, the latest in C4® power LED technology, microprocessor controlled high and low intensity modes, emergency flash and moonlight mode. The 7465 LED Intrinsically safe flashlight is the Flood Light model with either an integrated storable hang hook(Yellow) or spring-loaded clip(Orange). Removable magnet with 135 lb pull strength features a replaceable rubber boot. Available with optional 4 "AA" battery carrier for non-rechargeable operation.

Features

• Safety Rating: Class I & II, Div 1, Groups C, D, F, G;
• Safety Rating: Class III, Temp Code: T4 Exia;
• Safety Rating: Non-Incendive: Class I, Div 2, Groups A, B, C, D; T4
• LED Emitter: 2 C4® LEDs, impervious to shock (50K hour lifetime)
• Light Output:High Beam- 163 Lumens, 3h 45min runtime, 54m beam distance
• Light Ouput: Low Beam- 50 Lumens, 12h runtime, 10m beam distance
• 4 Output Modes: High, Low, Emergency Flash, Moonlight
• Dual Power Source Options: rechargeable NiCd battery pack or 4 "AA" alkaline battery carrier
• Body: High-impact, super-tough nylon polymer construction
• Body Dimensions: Full Extended- 9.2"H, w/ Lighthead Bent- 7.5" H x 2.75" W
• Light Head Diameter: 1.625" H x 2.25" L
• Net Weight: 23.1 oz (655 g) w/ NiCd Battery; 18.3 oz (519 g) w/ Alkaline Batteries
• Yellow Model: features a magnet & stowable hook for hands-free use
• Orange Model: features a magnet & spring-loaded clip for hands-free use
• Light Head: features a 210 degree articulating head that rotates a full 360 degrees
• Lens: Unbreakable polycarbonate w/ scratch-resistant coating
• Engineering Reflector: produces a smooth flood beam to illuminate your work area
• On/Off Switch: Rubber dome push button actuator provides easy operation even when wearing heavy gloves
• Impact Resistance: 2 meter impact-resistance tested
• IPX4 Water-Resistant

*Please note we can only ship RKI products to customers within the United States

M020-11212-141 QRAE 3 LEL / O2 / CO / HCN Multigas Monitor - Pumped, Wireless, Accessories Kit by RAE Systems

The QRAE 3 is a full featured compact 4-gas monitor that provides detection and monitoring of Oxygen (O2), Combustibles and toxic gases that include Carbon Monoxide (CO), Hydrogen Sulfide (H2S), Sulfure Dioxide (SO2) and Hydrogen Cyanide (HCN) and others.

QRAE 3 can deliver wireless real-time instrument readings and alarm status 24/7. This provides better incident visibility and can improve response time.

Monitor-only configuration includes

• Monitor as specified
• Sensors as specified
• Sampling option as specified
• Calibration adapter (diffusion model only)
• T Calibration tube (pumped model only)
• Internal filters (mounted - diffusion model only)
• External filters (one mounted plus pack of 3 - pumped model only)
• Travel charger cradle with computer cable
• Lithium-ion battery pack
• Universal wall adapter
• CD ROM with ProRAE Studio II
• CD ROM with product content
• Quick Reference Guide

Key Features

• Available in Diffusion or Pumped version
• IP-65/67 water and dust resistant case
• Strong, protective, concussion-proof design
• Real-time gas concentration readings and alarm status enabled by state-of-the-art wireless technology
• Unmistakable five-way local and remote wireless notification of alarm conditions
• Large graphical display icon-driven user interface through intuitive, simple-to-operate two-button user interface
• Multi-language support: 18 languages encoded
• Easy access to pump, sensors, filter and battery compartment

Applications

• Industrial safety
• Oil and gas
• Fireground "Toxic Twins" detection
• Environmental
• Fire and Emergency response
• Chemical
• Pharmaceutical
• Telecommunications

SXL Liquid Level Control Set by Agrowtek

Electronic optical "liquid level control system" includes two liquid sensors for high and low "fill" or "drain" control of fluids in tanks, reservoirs, etc. Only power and a valve or relay is required to complete the level control system; no external controller required. Easy to wire and setup. Includes one standard and one latching sensor. Compatible with 5-24Vdc valves and relays. Available with optional VX1 water valve kit or RX1 outlet kit for direct operation of 120Vac pumps, valves and other equipment.

AAA104626 SP-MGTP Portable Multi Gas Detector, O2, CO, H2S, CH4 (Catalytic), HCL by Senko

SP-MGTP is a sampling-type multi-gas detector capable of monitoring up to 6 gases with 37 possible gas combinations, including Volatile Organic Compounds (VOC). It continuously detects oxygen (O2), toxic, flammable gases, and VOCs, providing real-time alerts through LED indicators, sound alarms, and vibration signals. Designed to prevent industrial accidents caused by hazardous gas exposure, this device offers reliable protection in demanding environments.

KEY FEATURES

• Sampling-type with embedded pump & probe
• Max 6 gases with 37 different gas combinations
• Event log (Recent 30 event / bump / calibration)
• Easy to maintain (2 filters in probe & in detector)
• Inner teflon coating of gas tube line

2801-08-003 CC 28 Fixed Gas Transmitter with Gas Optimized Catalytic Sensor 0-100% LEL (MK 208-1), Hexane (C6H14), Display / Alarm by GfG

Superior technology

In areas where combustible gas or vapor hazards may exist, GfG s new CC 28 combustible transmitter is the perfect choice for reliable area monitoring. With its proven design, this ATEX certified transmitter offers an integrated explosion-proof buzzer and bright-alarm LEDs for reliable warning of combustible gas hazards (even in hazardous locations). This superior design provides warnings for immediate personnel, and ensures entire plant safety.

Easy handling

Smart sensor technology allows easy installation. Sensor replacement takes only a few seconds-simply plug in the sensor. User adjustments are performed at the transmitter with simple touch keys, or with the optional remote control interface (one person calibration).

RC2 remote control

Several combustible gases are lighter than air. With the transmitter mounted close to the ceiling, calibration can be difficult. The remote control for the CC 28 allows you to perform calibration or zero adjustments without the need of a ladder or lift. A flexible cable connects the remote control to the transmitter and displays the same reading as the display on the transmitter. With the remote control inspection,service and calibration can be performed easily by one person.

The sensor and the integrated temperature compensation provide highest measurement accuracy.

Low maintenance requirements and long sensor life reduce your cost of ownership. Just sign a service contract and don t worry about any problems. We will service your system at regular intervals.

Models

Model CC 28D allows you to read the gas concentration both at the transmitter and at the GMA controller.With the RC2 remote control - the CC 28 is easy to use and to operate even if it is mounted at the ceiling.

Model CC 28DA provides additional warning with bright integrated alarm LEDs and a buzzer.

Features

• Full-featured smart transmitter for combustible gas measurement
• Non-intrusive calibration adjustment
• Expected sensor life of 5 years
• Increased safety design to reduce installation cost in potentially hazardous locations
• ATEX EEx dem [1b] IIC T4
• Proprietary, high performance combustible gas sensor
• Available in three configurations: Blind (no display), Display, Display with local alarms

Advantages at a glance

• Display of gas concentration at transmitter or remote control
• ATEX II G EEx dem [ib] IIC T4
• Ex-proof visual and audible alarms
• No need of expensive EX-proof buzzer or wiring
• Easy sensor replacement with plug-in sensors
• Long life sensor
• Low service requirement
• Permanent status and function display at transmitter
• Adjustments by means of touch keys or remote control without opening the casing
• Easy handling even at hard-to-reach accessible transmitter positions.

WD-20250-24 Infrared Wand by Digi-Sense

The Digi-Sense Infrared Temperature Wand (Model 20250-24) is a noncontact measurement accessory to be used with the Digi-Sense Professional series of thermocouple thermometers (models 20250-17, -18, -19, -20).

Part Number: 17L-49-50

WD-20250-20 Professional 4 Input Data Logging Thermocouple Thermometer with NIST Traceable Calibration by Digi-Sense

Handheld thermocouple thermometers provide precise measurements when accuracy is a must, delivering dependable results every time! Each model is packed with distinctive features for use in a wide array of applications.

Features

• Reliable measurements, guaranteed! Precalibrated to NIST-traceable standards.
• Large backlight LCD for easy viewing in dimly lit conditions
• Minimum, maximum, and average readings, plus data Hold function
• Display of temp differential (except model 20250-01)
• Relative time clock on Min/Max/Avg provides a time reference for major events
• Electronic offset function allows compensation of probe errors to maximize overall accuracy
• User-selectable readout in °C, °F, or Kelvin (K) with 0.1 resolution
• Simple, intuitive setup and operation
• Auto power-off mode extends battery life
• Ergonomic design fits comfortably in your hand
• Data logging models available
• Accept a wide variety of thermocouple probes
• Infrared input port allows safe, noncontact measurements with optional IR wand
• Heavy-duty construction withstands knocks and jars
• Scan function for continuous reading in real time (except model 20250-18)
• Data logging software features graphing function

Applications

• Agricultural
• Educational
• Food processing
• HVAC
• Industrial
• Laboratory
• R&D
• Preventive maintenance

6010N Handheld pH/ORP Meter by Jenco

• Simultaneous displays pH or mV and temperature.
• 50 data set reviewable memory (6010M only).
• Convenient calibration with automatic buffer recognition of US and European buffer sets. Calibration data is stored in memory and ready for use on power up.
• Automatic or manual temperature compensation.
• Automatic lock mode and end point sensing are available to lock in stable readings.
• Automatic shutoff function (30 minutes of non-use).
• Battery life over 1000 hours.
• IP65 waterproof
• Low battery indicator.
• RoHS and CE compliant.

*Please note we can only ship RKI products to customers within the United States

059-B111-100 MiniRAE 3000+ Portable Handheld VOC Monitor - 10.6 eV Lamp, Li-Ion / Universal Charger, Accessories Kit, Calibration Kit, Wireless Bluetooth by RAE Systems

The MiniRAE 3000 is a comprehensive handheld VOC (Volatile Organic Compound) monitor that uses a third-generation patented PID technology to accurately measure more ionizable chemicals than any other device on the market. It provides full-range measurement from 0 to 15,000 ppm of VOCs.

The MiniRAE 3000 has a built-in wireless modem that allows real-time data connectivity with the ProRAE Guardian command center located up to 2 miles (3 km) away through a Bluetooth connection to a RAELink 3* portable modem or optionally via Mesh Network.

Monitor only includes

• MiniRAE 3000 Monitor, Model PGM-7320
• Wireless communication module built in, as specified
• Datalogging with ProRAE Studio II Package
• Charging/download adapter
• RAE UV lamp, as specified
• Flex-I-Probe™
• External filter
• Rubber boot
• Alkaline battery adapter
• Lamp-cleaning kit
• Tool kit
• Operation CD-ROM
• Operation and Maintenance manual
• Soft leather case

Optional calibration kit adds

• 100 ppm isobutylene calibration gas, 34L
• Calibration regulator and flow controller

Optional guaranteed cost-of-ownership program

• 4-year repair and replacement guarantee
• Annual maintenance service

Key Features

• Third-generation patented PID technology
• VOC detection range from 0 to 15,000 ppm
• 3-second response time
• Humidity compensation with built-in humidity and temperature sensors
• Six-month datalogging
• Real-time wireless built-in - Bluetooth (and optional RAELink3 portable modem) or Mesh Network support
• Large graphic display with integrated flashlight
• Multi-language support with 10 languages encoded
• IP-67 waterproof design

Application

• Oil and Gas
• HazMat
• Industrial Safety
• Civil Defense
• Environmental and Indoor Air Quality

Part Number: P1016300PN