All Products

5601-3059 GDX-350 Gas Sensor Transmitter/Monitor, [NH3] 0-500 ppm, 2.4 GHz by Bacharach

Bacharach's new state-of-the-art GDX-350 transmitters, with Smart Sensor technology, provide accurate and continuous detection of toxic, combustible and asphyxiate gases. The full-featured design of the GDX-350 includes a large LCD display, a 4-20 mA interface, programmable alarms, optional relays and a Modbus interface. Exclusive pre-calibrated replacement sensor technology makes occasional maintenance practically effortless. Rugged construction, intrinsic safety capability (in two-wire mode with barrier) and an explosion-proof housing allow the GDX-350 to operate directly in hazardous-rated areas of many industrial environments, delivering reliable, superior-sensing performance to protect human life, equipment and property.

With its large LCD display, the GDX-350 shows gas concentrations, engineering units and bar graphs along with the most recent 30 minutes of trend data. Utilizing the on-board magnetic keypad, users can also navigate through the display to change alarm set points, instrument configurations, or enter into maintenance mode for non-intrusive sensor calibration. For security, menu options also enable the selection of an authorization code to lock critical parameters. Accompanying the LCD display are standard LED alarm indicators that show when low and high alarm conditions are met. An optional relay board is available to provide three 5-amp relays that can be used to drive audible/visual alarms, or activate exhaust fans.

Features & Benefits:

• Pre-calibrated Smart Sensor capability with 'plug-n-play' convenience minimizes maintenance and downtime
• Non-Dispersive Infrared (NDIR), Catalytic Bead and Electrochemical sensor options available
• Can be placed directly in hazardous environments where leaks occur for quick detection and rapid response
• Graphic LCD for real-time monitoring of concentrations
• 4-20 mA, optional Modbus RTU® and wireless interface
• Easily update alarm set points, configurations or maintenance modes using the LCD display
• 30-minute onboard data trend

98767-06 Traceable Pure H2O Tester with Calibration by Digi-Sense

This pure-water conductivity meter meets lab certification requirements for pure water analysis - CAP, ASTM, NCCLS, USP, and ACS standards. The built-in temperature probe automatically compensates readings for more accurate results. Simple and single-use operation of the instrument helps to eliminate errors and ensure repeatable results. Meter features Hold function, calibration adjustment, and overrange and low-battery indications.

Traceable® Products have an individually-numbered Traceable® Certificate provided with each unit, that assures accuracy from our ISO/IEC 17025:2017(1750.01) calibration laboratory accredited by A2LA. It indicates traceability of measurements to the SI units through NIST or other recognized national measurement institutes (NMI) that are signatories to the CIPM Mutual Recognition Agreement. Each product goes through an intense vetting process before it can carry the Traceable name, thus saving you both time and money by not having to calibrate separately.

• Includes NIST-Traceable certificate from our A2LA accredited (1750.01) calibration laboratory
• Designed for labs required to periodically check water purity
• Obtain readings from 0.1 to 20,000 µS on pure to raw waterSingle-purpose use for greater accuracy

Includes

conductivity probe with built-in ATC and 40" (1 m) cable, 9 V battery, and NIST-traceable calibration certificate with data.

Multiflow Regulator

The 6000 Series regulators are for use with 58 liter and 103 liter non-refillable cylinders having a CGA 165 (5/8"-18 UNF) inlet connection. They may also be configured for use on returnable cylinders having pressures to 2400 PSIG. These aluminum-bodied, singlestage, piston-style regulators have eight flow settings from 0.2 LPM to 6 LPM. They are compatible with non-reactive as well as reactive gas mixtures like hydrogen sulfide, nitric oxide and ammonia. 1000 PSI gauges are used for non-refillable cyclinders and 3000 PSI gauges are used for refillable cylinders.

Part Number: 6165

Part Number: H1049100PN

Part Number: 17L-135A-1.25

*Please note we can only ship RKI products to customers within the United States

6011BKA Bluetooth Handheld pH/ORP Meter Kit With Batteries Only by Jenco

Well-designed, Inside and Out

The Basis Portable Series is Jenco's latest iteration of our portable meters and represents a huge step forward for on-location water quality measurements. This series introduces Bluetooth or non-Bluetooth connectivity and a merging of the best features from our other series, which means we double down on reliability, usability and value.

Accurate, Reliable Measurements

• Up to 5Point calibration (pH)
• mV zero adjust (ORP)
• > 1012 Ω input impedance (pH)
• Each and every unit is hand calibrated and QC ed by at least 2 teams.
• CE, RoHS, FCC ID complaint

Improved Usabiltiy

• Clear, large LCD
• Membrane buttons with tactile feedback On-devicememory storage
• 750 point memory with date/time stamp for GLP
• IP67 water-tight housing
• Removable, rugged protective case
• Inclined back for tabletop use

App-Enhanced Productivity

Transfer 750 saved measurement data from meter to app for sharing and further analysis.

Other Meters In This Series

• Single and dual parameter pH, ORP, conductivity, TDS, salinity,dissolved oxygen, optical dissolved oxygen, pH/ORP/EC, pH/ODO.
• Polarographic or optical DO
• Bluetooth and non-Bluetooth models
• With memory storage
• With or without protective case

Kit Includes:

• 6011B - Bluetooth Handheld pH/ORP Meter With Batteries Only
• 600P - pH Electrode, 3-ft Cable, BNC Connector, Max Temp. 60 Deg. C
• 6011AST - Stainless Steel Temperature Sensor, 10K ATC, 1m, 6 PIN
• 6011F - Carrying Case

Part Number: P1016500PN

FS24X-911-22-4 FS24X QuadBand™ IR3+ Fire and Flame Detector, Aluminum, NPT INMETRO by Honeywell Analytics

Fire Sentry FS24X is a quantum leap in flame detection with its sophisticated software and detection technology.

The Fire Sentry FS24X is the latest generation high technology Multi-Spectrum Triple IR (IR/IR/IR/Visible) Flame Detector, which is part of our FSX family of advanced technology Electro-Optical fire detectors. Using our patented* WideBand IR™, WideBand 4.3 micron IR™, and Visible detection technology, the Fire Sentry FS24X is a quantum leap in flame detection. Sophisticated software algorithms and dual microprocessors ensure that the Fire Sentry FS24X has the highest flame detection performance combined with optimal false alarm rejection.

The WideBand IR™ Infrared technology using high-speed solid-state Quantum sensors allows detection of all types of fires, hydrocarbon and non-hydrocarbon, in all weather conditions. If the detector's signal is blocked by ordinary window glass, the patented WideBand IR sensors will still alarm to the fire albeit at a reduced sensitivity and slower response time.

Dual microprocessors provide a high level of fail-safe operation combined with fast and reliable performance. The master microprocessor performs high-speed digital sampling and signal-processing calculations, while the slave microprocessor handles various sensor data, performs communications, self-diagnostics and provides interface versatility and additional memory for storing Event Log and FirePic™ data.

The Fire Sentry FSX family of detectors feature our patented* FirePic data storage and information retrieval facility. FirePic™ records pre-fire data, which can be recovered from the Detector's non-volatile flash memory for post fire analysis and postulation of the fire cause. Additionally, unique Real-Time Graphing (RTG™) allows viewing of the data which the Detector actually sees. A combination of outputs makes the Fire Sentry FS24X a truly versatile detector for today's demanding industrial requirements.

The Fire Sentry FS24X detector has a detection range greater than 200 feet (Very High Sensitivity setting) for the detection of a one square-foot Heptane reference fire and has a cone of vision far greater in volumetric coverage than any other Multi-Spectrum IR Detector. This means fewer Detectors can be used as compared to other manufacturers' Detectors.

Features

• Patented* WideBand IR™ technology
• Patented* Electronic Frequency Analysis™
• Visible sensor for optimum false alarm rejection
• Selectable detection sensitivities
• Field-of-View: 110° cone-of-vision (90° cone-of-vision model also available)
• Dual microprocessors for reliable performance
• Real-time clock for accurate time dating of events
• FirePic™ - pre-fire event data storage
• Event log with date and time stamp
• RS-485 ModBus communication
• Non-Isolated 4-20 mA Analog output (sink or source)
• Alarm, Fault and Fire Verification relays
• Automatic optical path and electronic self-test
• Patented* Electronics Module for components protection with easy plug-in terminations and field installation
• Two 3/4" NPT conduit entries
• Low power consumption
• High RFI and EMI immunity
• FM, ATEX, CE mark approvals
• CU-TR approved
• INMETRO approved
• Meets SIL 2 requirements
• Certified to EN54-10:2002 (FS24X-9) option
• FM 3260 Performance

Benefits

• Detects hydrocarbon and non-hydrocarbon fuel fires in all environmental conditions
• User selectable outputs
• Wide operating temperature range
• Optimal false alarm rejection
• Minimal maintenance for trouble-free operation
• PC software and Interface Module (FSIM) for fault diagnostics, real-time graphics (RTGs), and downloading of FirePics™ and event log
• Suitable for a wide variety of applications
• Easy electronics module replacement
• Test lamps for manual testing

Applications

• Refineries and oil production facilities
• Off-Shore platforms
• Turbine/Compressor enclosures
• Oil and gas pipelines and pumping stations
• LNG/LPG loading and unloading facilities
• Natural Gas and CNG plants
• Ethanol, Methanol, and IPA production and storage
• Crude oil and gasoline storage and tank farms
• Aircraft hangars
• Paint and solvent storage
• Chemical production, storage, and loading facilities
• Power plants

BW Technologies Replacement Combustible Sensor

BW Technologies produces and manufactures a range of replacement sensors for your BW Technologies device. When in need of a replacement combustible sensor, BW Technologies produces some of the most reliable plug in sensors on the market. These heavy duty sensors are compatible for a range of BW Technologies instruments. For more information on compatible devices and product safety, please consult your device's specification sheet.

Part Number: SRW0475C

Part Number: CGQ344JK

*Please note we can only ship RKI products to customers within the United States

Sperian Biosystems PhD6 Multigas Detector

The Biosystems PhD6 Multigas Detector is the latest development in compact multigas detection systems. The detector is proven to be compact, efficient, and cost effective. With dual alarm systems featuring ultra-loud audible indicators and ultra-bright LED visual indicators, users and those nearby are always notified when potential hazards may be present. When developing this detector, the engineers at SperianProtection Instrumentation also developed an express docking station that would reduce calibration time and labor costs. The detection and docking station help users meet record keeping requirements and reduce the risks of human error. With the SperianBiosystems PhD6 Multigas Detector, users can rest assured that they are receiving the very best in gas detection technology.

Key Features

The Biosystems PhD6 Multigas Detector is compatible with over 19 sensor choices including:

• PID
• IR-CO2
• IR-CH4
• Conventional LEL
• Oxygen
• 15 different toxic gas sensors

The gas detector is encased in a durable solid polycarbonate case with a rubber over mold for easy handling. It has an interchangeable battery pack with both Alkaline and Li-Ion rechargeable batteries. Both battery types offer up to 24 hour run times. The unit features dual audible alarms at 92 decibels and front and side ultra-bright LED visual alarms to ensure that the user and those nearby are always notified of possible hazardous conditions. For easy interpretation, the detector has an easy to read status bar and large LCD display that notifies users of the device s functionality and calibration due date. Using the menu options, users can easily adjust a variety of the instrument s settings.

Automatic Docking Station

When developing the PhD6 Multigas Detector, product developers also created an automatic docking station (Biosystems IQ6 Express Dock) to be fully compatible with the detector. The docking station aims to reduce labor time and costs by fully automating certain aspects of instrument maintenance including calibration, functionality testing, and record keeping. Using the Express Dock, users can maintain compliance with recordkeeping requirements by simply docking the detector in the station. The station will automatically perform a variety of operations without user intervention.

Sperian Protection Instrumentation and Honeywell

Sperian Protection Instrumentation is a global leader in personal safety equipment. The company was recently acquired by Honeywell, another global leader in technology and innovation. As a Fortune 100 company, Honeywell has a vested interest in maintaining its reputation as a developer of efficient and reliable safety equipment. Sperian Protection Instrumentation helps to expand Honeywell s personal safety offerings while advancing their position in the American market. By purchasing a product by Sperian and Honeywell, customers can be assured they are receiving the very best in safety technology and equipment.

72-5265RK-05-1K Eagle Portable Monitor for H2S (0 - 1,000 ppm)/CO2 (0 - 60%) by RKI Instruments

The Eagle Portable Monitor can simultaneously detect up to 6 different gases. With over 400 gas monitoring configurations, the unit can detect a wide range of toxic gases. RKI Industries offers long life protection for workplace safety and hazardous jobsites. With a reputation for advanced engineering and state of the art technology, the RKI Industries' Eagle One to Six Gas Portable Monitor is an industry leader in accuracy and affordability.

Features

The Eagle One to Six Gas Portable Monitor is available with a wide variety of exclusive features. The unit is capable of PPM/LEL hydrocarbon detection and for environmental use, has a methane elimination switch. The dual hydrophobic filters (available on some models) ensure quality control. To preserve the integrity and safety of the device, the portable monitor also has an adjustment lockout switch to prevent tampering. For quick and easy testing, the monitor offers autocalibration and single gas calibration.

The Eagle is housed in an ergonomic RFI, EMI, chemical, and weather resistant polycarbonate and polyester enclosure. It can operate in the rain or in 2 inches of water without damage. It features an ergonomically designed top handle to ensure durability.

Accessories and Options

IR Sensors are available for CO2, % LEL CH4 or HC, and % volume CH4 or HC. Each unit also has datalogging capabilities for research, evaluation, and analysis of worksite atmospheres. The unit comes standard with several accessories including a shoulder strap, alkaline batteries, a hydrophobic probe, a 5 foot hose, and an internal hydrophobic filter with most models. Optional accessories can be purchased to fully customize the portable monitor to meet specific needs including a datalogging kit, remote alarms, dilution fitting, Ni-Cad batteries, battery chargers, continuous operation adapter, extra loud buzzer, extension probes, and large internal hydrophobic filter.

Specifications

The Eagle has a battery life of up to 30 hours of continuous operation with alkaline or Ni-cad capability and a sensor life of approximately 2 years. Its standard weight is approximately 5 pounds with dimensions of 10.5 L x 5.9 W x 7 H. The formidable long life pump (with a life of approximately 6,000 hours) reaches up to 125 feet in range with filters and has a low flow pump shut off and alarm. The unit has a response time of up to 30 seconds for most gases, and features a double alarm of audible alerts at 85 dB and visual alerts of dual high intensity LEDs and a flashing display screen.

The display screen is an easy to read 4 x 20 LCD readout. The backlit display sits at the top of the unit for full visibility, and displays the readings and statuses of 4 channels simultaneously.

The portable monitor is rated as intrinsically safe and has a standard 2 year warranty for materials and craftsmanship.

*Please note we can only ship RKI products to customers within the United States

Part Number: C2HOSE110

Part Number: REGTRIG1

SG-3040-S Glasses, Safety (Ztek) by AquaPhoenix

Lightweight, wraparound frame / lens offers superior side protection without the distraction of seams or bends. Soft, rubber temple tips provide comfort without slipping. Coated, scratch-resistant lenses provide 99% UV protection

MPstand MiScope Megapixel Stand by Zarbeco

The MiScope Megapixel stand is designed to position the MiScope Megapixel 2 when operating at 12x (its lowest magnification). The fixed height allows precise calibration and repeatable measurements when operating at low magnification.

The MPstand works with the MiScope-MP2 (including MiScope-MP2-IR; MiScope-MP2-UV; MiScope-MP2-WUVIR). MiScope Megapixel 2 is not included (must be purchased separately).

Features

• Lowers magnification
• Increases field of view
• Gives additional working room for larger samples
• Portable
• Includes stand
• MiScope Megapixel not included (must be purchased separately)

Applications

• Forensics to lower magnification to see more of signature
• Field Sciences, Biology, Entomology, to view larger objects

SCT-108.005.05 SCT-EC-MINI-HR EC Mini HR Controller by ScichemTech

Includes:

• Conductivity sensor
• Fixation clamps
• Instruction manual

Features:

• SCT EC MINI-HR online Conductivity controller is an panel Instrument for online monitoring of Industrial process conductivity
• Simple and compact design
• Three ranges of conductivity measurements in on single controller
• Range switch over and constant check can be easily adjusted from the rear panel.
• Unique signal collecting and processing technology.
• Special think film circuit for accurate measurement and stable operations.
• Linearized data and automatic temperature compensations.
• In line measurement and control of conductivity.
• Conductivity electrode is supplied with 5 meter cable.