$75 - $100

94460-82 Traceable® Jumbo Fridge/Freezer Digital Thermometer with Calibration; Bottle Probe by Digi-Sense

The jumbo digit thermometer is designed for monitoring freezers, water baths, heating blocks, incubators, refrigerators and other gerneral-purpose applications. Triple display simultaneously shows maximum, minimum, and current probe temperatures plus room temperature. Min/max monitors high/low readings overnight, on weekends, or for any time period -a significant advantage over reading-only glass thermometers. Alarm feature provides alert when temperature rises above or falls below a set point. Alarm is programmable in 1° increments. Ten-foot micro-cable with solid-state probe permits doors to close on it and eliminates mercury contamination.

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

Model 94460-82 is supplied with special bottle probe specifically designed for refrigerator/freezer applications. The temperature sensor is enclosed in a bottle, which protects it from rapid temperature changes when refrigerator door is opened.

• Get accurate, reliable measurements with included NIST-traceable calibration
• Easy-view, jumbo 1 1/2-inch-high digits may be read from 30-feet
• Glass bottle probe are sealed and filled with nontoxic glycol solution
• Sensor with 10-foot cable

Includes

NIST-traceable calibration certificate with data, flip-open stand, Velcro® and magnetic strips, and one AAA alkaline battery.

TT420 Tagboard Class 4.2 Spontaneously Combustible Placard (10.75" x 10.75") by GHS Safety

Placards are displayed on vehicles, tankers, and containers to identify the risk of products being transported. GHS Line of placards are manufactured to meet the UN specifications on the Transport of Dangerous Goods.

These placards are stocked in 3 materials. Paper Tag-board placards are a cost effective single use format. Rigid Plastic placards will withstand multiple uses even in adverse weather conditions.

Outdoor Grade Peel and Stick Vinyl placards offer a permanent marking solution and will withstand outdoor environments.

WD-35634-03 Replacement pH Sensor for Tester 30+; DJ by Oakton

Replace electrodes when they break, no longer hold calibration, cannot be rehydrated, or are not compatible with your sample. For your convenience, cables, power adapters, and other accessories are available for your Oakton meters and pocket testers.

98767-41 Traceable Jumbo-Display Thermometer with Calibration, ±0.3°C accuracy at tested points; 1 Piercing-Tip Probe by Digi-Sense

Traceable® Products have an individually-numbered Traceable® Certificate provided with each unit, that assures accuracy from our ISO/IEC 17025:2017(1750.01) calibration laboratory accredited by A2LA. It indicates traceability of measurements to the SI units through NIST or other recognized national measurement institutes (NMI) that are signatories to the CIPM Mutual Recognition Agreement. Each product goes through an intense vetting process before it can carry the Traceable name, thus saving you both time and money by not having to calibrate separately.

• Includes NIST-Traceable certificate from our A2LA accredited (1750.01) calibration laboratory|Display updates every second|Stainless steel piercing probe is perfect for measuring semisolids|Flat-surface probe available|°F/°C switchable|ON/OFF switch to preserve battery life
• Features a piercing-tip probe|Has enhanced accuracy at tested points

Includes

NIST-Traceable calibration certificate with data and battery

Part Number: H197160LM2

343C1 Dual Input K-Type Thermocouple Thermometer with Two GK11M Probes by Test Products International

TPI contact temperature testers are accurate, reliable, and built to last. Models 341K, 343 and 367D can be auto field calibrated to system accuracy (tester plus probe) of ± 1°F in less than 10 seconds in ice water.

Auto Field Calibration Perform ice bath calibration to achieve ±1°F system accuracy within the 30°F to 120°F temperature range. Calibration is an easy two-step process performed with instrument keypad, no additional tools needed.

Features:

• Auto Field Calibrate in less than 10 seconds in ice water to achieve ± 1°F system (tester & probe) accuracy within 30°F to 120°F temperature range
• Temp1, Temp2, Temp1-Temp2 display modes
• Min / Max Record
• Auto Resolution (0.1° / 1°)
• °C/°F Selectable
• Hold feature freezes reading on display
• Auto Off
• Protective rubber boot
• Easy to read LCD display

Includes:

• Two GK11M temperature probe
• A304 protective boot
• A255 soft pouch

H-10-100-10 Ammonia Colorimetric Gas Detection Tube, 5 - 100 ppmv (10 Tubes / Box) by RAE Systems

RAE Systems colorimetric gas detection tubes enable quick, on-the-spot measurement of a wide range of toxic and combustible gases and vapors. RAE Systems tubes are easy to read, and provide a sharp, clear color change directly corresponding to the concentration of gas present. RAE Systems tubes are compatible with the RAE Systems piston hand pump, a reliable way to draw samples of an exact volume required for the most accurate measurements.

Key Features

• Wide assortment of tubes available to detect over 300 gases and vapors
• Easyto use, even in multiple layers of gloves
• Easy-to-read with sharp,clearcolorchange
• No calibration or other maintenance required

Applications

• Oil and gas
• Chemicals and petrochemicals
• Agriculture and pestcontro
• Food and beverage production
• Environmental protection
• Fire service
• HazMat response
• Nationalsecurity

Part Number: H101635PM2

H-10-116-20 Phosphine Colorimetric Gas Detection Tube, 25 - 500 ppmv (10 Tubes / Box) by RAE Systems

RAE Systems colorimetric gas detection tubes enable quick, on-the-spot measurement of a wide range of toxic and combustible gases and vapors. RAE Systems tubes are easy to read, and provide a sharp, clear color change directly corresponding to the concentration of gas present. RAE Systems tubes are compatible with the RAE Systems piston hand pump, a reliable way to draw samples of an exact volume required for the most accurate measurements.

Key Features

• Wide assortment of tubes available to detect over 300 gases and vapors
• Easyto use, even in multiple layers of gloves
• Easy-to-read with sharp,clearcolorchange
• No calibration or other maintenance required

Applications

• Oil and gas
• Chemicals and petrochemicals
• Agriculture and pestcontro
• Food and beverage production
• Environmental protection
• Fire service
• HazMat response
• Nationalsecurity

SXM-1 Soil Moisture Sensor by Agrowtek

SXM-1 Electronic volumetric water content (VWC) moisture sensor for soil and other growing media. SXM sensors allow GrowControl™ GCX systems to monitor and log VWC levels and dry-down times, as well as manage irrigation based on VWC.

Water-proof probe inserts into media up to 4" deep or can be fully buried. DXI8 input modules connect the probe to the GCX control systems. Each DXI8 module can support up to eight (8) SXM-1 moisture probes.

Advanced high frequency electronic design is immune to e ects from salinity and composition. Probe is water proof and constructed of non-corrosive materials.

Applications

• Soil
• Inert Media
• Direct Burial