$75 - $100

18520-54 Type T Thermocouple Probe Quick Dis-connector, Dual with Std-Connector, 12" L, .125 Dia, Ungrounded Junction by Digi-Sense

The temperature range is for the probe tip only. The handle material may be affected if the probe is rated higher than the handle depending on exposure time, application, and handle material. ABS handles are rated to 220°F (104°C); PVC handles are rated to 200°F (93°C); Stainless Steel handles are rated at 450°F (232°C); Mini Connectors are rated to 392°F (200°C)

• Ideal for continuous monitoring
• Designed with 316 stainless steel sheath
• Response Time: 1.2 - 5 seconds or greater
• Includes a stand alone female connector for instalation to a thermocouple extension cable
• Each probe comes with a color coded ANSI dual standard connector: type J-black, type K-yellow, type T-blue, and type E-purple.
• Custom designs or changes to this product are available upon request

Old Part Number: HP120820
New Part Number: H120820LA

18520-36 Type K Thermocouple Probe Quick DisConnector, Dual with Std-Connector, 6" L, .125 Dia, Grounded Junction by Digi-Sense

The temperature range is for the probe tip only. The handle material may be affected if the probe is rated higher than the handle depending on exposure time, application, and handle material. ABS handles are rated to 220°F (104°C); PVC handles are rated to 200°F (93°C); Stainless Steel handles are rated at 450°F (232°C); Mini Connectors are rated to 392°F (200°C)

• Ideal for continuous monitoring
• Designed with 316 stainless steel sheath
• Response Time: 1.2 - 5 seconds or greater
• Includes a stand alone female connector for instalation to a thermocouple extension cable
• Each probe comes with a color coded ANSI dual standard connector: type J-black, type K-yellow, type T-blue, and type E-purple.
• Custom designs or changes to this product are available upon request

Part Number: H10111000PM2

0613 5506 Clamp Probe (NTC) with 5 m Cable Length by Testo

Use the clamp probe (NTC) to accurately measure surface temperatures on heating system pipes, water pipes, refrigeration systems or heat pumps (pipe diameter 6 to 35 mm). Depending on the measuring instrument connected, the clamp probe can be used to detect superheating/subcooling on refrigeration systems, but also to determine flow and return temperatures in heating technology, for example. The collet enables the surface probe to be attached quickly and easily.

• Precision NTC temperature sensor
• Collet for quick attachment
• Measuring range: -40 to +125 °C

18526-62 Economic Cryogenic Probe, 100 Ohm, 6" L, 3 Pin, .188 Dia, 5ft FEP by Digi-Sense

Time constant is the time required to reach 63.2% of the new reading. To determine how long it will take to reach 99% of the new reading multiply the time constant by five.

The temperature range is for the probe tip only. The handle material may be affected if the probe is rated higher than the handle depending on exposure time, application, and handle material. ABS handles are rated to 220°F (104°C); PVC handles are rated to 200°F (93°C); Stainless Steel handles are rated at 450°F (232°C); Mini Connectors are rated to 392°F (200°C).

• Temperature ranges from -321°F - +300°F (-196°C to - +150°C)
• Time Constant: 3 seconds or greater
• Maximum error for probe assembly is ±1.1°C + 0.35% of reading below 300°F,. Alpha coefficient is 0.003850 U/U/°C (DIN IEC 751). Resistance at ice point (0°C) is 100 omega.
• Custom designs or changes to this product are available upon request

08133-04 TI.31 6 Bottom-Mount Bimetal Thermometer, 3" Dial, 6" L/50-550F/10-290C by Digi-Sense

Accuracy is ±1% full-scale when stem is immersed 2" in liquids or 4" in gases (immerse models with a 2.5" stem length 2" in gases). Measured stem length from the top of the threads to the bottom tip of the stem. Stem dia is 0.25"; threaded connection is 1/2" NPT(M). All thermometers meet or exceed ASME B40.3 standards. Maximum environmental temperature for glass lens thermometers is 500°F (148°C).

Key Features

• Greater temperature range
• Anti-parallax dial for accurate readings
• Hermetically sealed per ASME B40.3 standard to prevent fogging and protect against tough environments
• Rugged 304 stainless steel construction with a clear glass lens
• Recalibrate using the external reset screw

Part Number: H19711.62VM2

2610910 Bacteria Tests: Hach Paddle Test Total Aerobic Bacteria / Total Coliforms 10 pk by AquaPhoenix

Hach Paddle Testers allow fast, easy screening of water samples, solid surfaces, and nonviscous liquids where unsanitary conditions may exist. The paddle is a double-sided slide attached to the vial cap. Each side of the slide is used to perform a separate test. The slide has a molded-in grid for easy colony counting without opening the optically clear, leakproof vial.
Paddle Tester, Total Aerobic Bacteria/Total Coliforms (Tryptic Soy Agar/Violet Red Bile Agar), pk/10.

• Save time and simplify lab and field testing with Hach prepared P/A media
• Report Total Coliform values with EPA accepted Presence-Absence bottles and media
• Simplify routine testing with self-contained, easy-to-use Paddle Testers and BART™ products

*Please note we can only ship RKI products to customers within the United States

WD-20250-57 1000A AC Clamp Meter with NIST-Traceable Calibration by Digi-Sense

Reliably detect and measure the power quality running to your equipment to quickly find hidden issues. These meters feature durable, double-molded plastic housing and jaw.

Features

• Reliable measurements, guaranteed! Precalibrated to NIST-traceable standards
• Large backlit display provides easy-to-read measurements
• Autorange feature automatically selects optimal measuring range
• Low-battery indicator alert for when it s time for a fresh battery

400 A AC Clamp Meters (20250-55, -56)

• Diode testing, continuity check with a buzzer sound at 50 ?, and a measurement rate of 2 readings per second
• Built-in noncontact AC voltage detector
• CAT III-1000 V safety rating
• Improved measurement ease with data Hold function
• Model 20250-56 also measures DC current and capacitance, and features a peak Hold function that captures the peak AC current or voltage reading

1000 A AC Clamp Meters (20250-57, -58)

• Improve accuracy with True RMS check for load current and AC voltage, as well as continuity of contacts, fuses, circuits, and switches
• See power variations on analog bar graph display
• CAT III-600 V safety rating
• Model 20250-58 also features DC current measurement and True RMS for more accurate current readings

Applications

• Electrical
• Industrial
• Laboratory
• HVAC
• R & D

Includes

Test leads, temperature probe (models 20250-55, -56, and -58), carrying case, 9 V battery, and NIST-traceable calibration report supplied by InnoCal.

EC330 VisionPlus Conductivity Meter by Jenco

Jenco EC330 is an easy to use, IP67 rated conductivity tester with TDS and temperature readout. Key features include dual display of conductivity or TDS with temperature, selectable or auto ranging, replaceable conductivity cell and IP67 rated body.

This tester is RoHS compliant.

• Simultaneous display of conductivity and temperature, or TDS and temperature
• 1 or 2 point calibration
• Automatic temperature compensation
• Selectable or auto ranging of conductivity and TDS readings
• Replaceable conductivity cell
• 6 selectable units of measure (uS/cm, mS/cm, mg/L, g/L, °C, °F)
• Data hold