$75 - $100

Part Number: UCSCAB0

Old Part Number: HP101610
New Part Number: H101610PA

Part Number: H10163000PA

Part Number: 500A

91210-45 Traceable® Workhorse Thermocouple Thermometer with Calibration by Digi-Sense

The Workhorse thermometer provides the user with a display that is easy to read in all types of lighting, and long battery life (150 to 200 continuous hours) making it an excellent choice for as a basic meter. This meter has adjustable offset allowing the user to adjust the thermometer exactly to a specific temperature, in-house calibration, or particular sensor for increased accuracy. Workhorse features a Hold button, F/C selectable units, and auto power-off. Accepts every type K thermocouple probe with miniconnector.

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

• Get accurate, reliable measurements with included NIST-traceable calibration
• Front-panel adjustable offset

Includes

NIST-traceable calibration certificate with data, one type K probe (5"L x 1/8" dia. tip), bench stand, carrying case, and one 9 V battery.

94053 Dew Heater Ring - 11" by Celestron

The Celestron Dew Heater Ring is the ideal dew prevention solution for your Celestron telescope. This must-have accessory will improve your observing or imaging nights year-round. The Dew Heater Ring permanently mounts to your 11" Celestron Schmidt-Cassegrain (manufactured 2006 or later), EdgeHD, and RASA optical tube, replacing your retaining ring so you'll never be caught without it. The installation process is quick and easy (follow the manual for instructions).

How it works

The Dew Heater Ring replaces the plastic retaining ring on your Schmidt corrector lens for efficient heating across the lens. The ring is constructed of lightweight, durable aluminum. Its rigid frame supports the cable circuity and the telescope's Schmidt corrector lens. Unlike other heating bands or strips that inefficiently heat the lens cell to warm the glass, the Celestron Dew Heater Ring heats the corrector glass directly, providing the most efficient transfer of heat to prevent dew formation.

Simply plug the ring into an external 12V DC power source for consistent, continuous heat that will prevent dew from forming even under heavy dew conditions. The Dew Heater Ring features two storage clips to keep the power and thermistor jacks secure when not in use while accommodating the telescope's dust cover.

The Dew Heater Ring also comes with a cable management clip that connects to the telescope's front cell. Corral the power and thermistor jack to prevent them from dangling and reduce unwanted pulls on the cable connection to the rings.

The Dew Heater Ring comes complete with:

• Dew Heater Ring
• Cable management clip
• Power jack extension cable
• Paper installation shield

Enhance your setup

To achieve the highest level of dew prevention while maximizing power efficiency, we strongly recommend pairing the Dew Heater Ring with a Smart DewHeater Controller (sold separately). The controller uses the ring's built-in thermistor and its internal environmental sensor to provide just the right amount of heat to the corrector to prevent dew based upon the ambient temperature, ambient humidity, and temperature of the Schmidt corrector, which can dramatically reduce the ring's power draw, greatly increasing battery life. The ring also includes an extension cable for connecting the ring directly to one of the controllers' heater output ports, or to a third-party controller's heater output port. (Note: the ring's integrated thermistor is only compatible with the Celestron Smart DewHeater Controllers).

We also recommend adding a dew shield to your setup. While not mandatory, a shield will cut down on the amount of power the Dew Heater Ring needs to keep the optics clear.

• Heater ring provides the most efficient heating directly to the corrector lens to prevent the formation of dew
• Permanently mounts to your existing telescope tube for a seamless look–plus, you'll never forget to bring it with you
• Integrated thermistor continuously monitors the temperature of the corrector lens when used with the Celestron Smart DewHeater Controllers.
• Rigid, lightweight, and durable aluminum construction
• Included storage clip and cable management clip keep your cables organized

*Please note we can only ship RKI products to customers within the United States

GHS1296VY Environmental Dangerous Goods Laser Drum Labels (Vinyl), 100/Pkg by GHS Safety

GHS pre-printed drum labels come with your choice of pictorgram that meets the UN recommendations on the Transport of Dangerous Goods. These labels make an excellent choice for short production runs or re-labeling of product for transportation. These lebels are printed on a Laser Printable Paper or Vinyl stock with a permanent peel and stick adhesive. Use any desktop publishing package to quickly make your own transportation labels. Available in 8.5" x 14" size and packaged in bundles of 100 sheets.

Old Part Number: HP1016100N
New Part Number: H1016100PN

*Please note we can only ship RKI products to customers within the United States

TT300TB Tagboard Class 3 Flammable Liquids Placard (10.75" x 10.75") by GHS Safety

Placards are displayed on vehicles, tankers, and containers to identify the risk of products being transported. GHS Line of placards are manufactured to meet the UN specifications on the Transport of Dangerous Goods.

These placards are stocked in 3 materials. Paper Tag-board placards are a cost effective single use format. Rigid Plastic placards will withstand multiple uses even in adverse weather conditions.

Outdoor Grade Peel and Stick Vinyl placards offer a permanent marking solution and will withstand outdoor environments.

GHS1259 Explosion Pictogram Labels (4" x 4"), 500/roll by GHS Safety

Quickly and easily mark your goods for shipping with HazCom GHS Hazard Pictograms. These pictograms are 4" x 4" (100 mm x 100 mm) and come in rolls of 500 labels.

Printed on gloss paper with a peel and stick adhesive, these labels are easily applied to metal or plastic containers.