$2000 - $4000

2811-724-003M EC 28 Gas Transmitter with MODBUS, Nitrogen Oxide (NO), Display / Alarm by GfG

Advanced Technology

Wherever hazards are expected, the EC 28 transmitter and GfG s proven monitoring systems are the right choice for reliable surveillance. The ATEX-certified design, an integrated, Ex-proof buzzer, and bright alarm LEDs provide the highest safety in hazardous areas by including visual and audible alarms. The gas alarm not only alerts the person in the control room of hazards, but also the person on-site.

Easy handling

Smart sensor technology allows a user to install the transmitter or to replace a sensor within a few seconds just plug the sensor into the transmitter. Adjustments are done directly at the transmitter using touch keys or with the remote control (one-person calibration).

Remote Control RC2

Ammonia and hydrogen are lighter than air. With the transmitter installed close to the ceiling, GfG can provide permanently connected cables with plugs for the remote control, which allow the user to do all adjustments without having to climb a ladder. In addition, one remote control can be used for several transmitters, which helps cut costs and increase efficiency.

The remote control display is always identical to that of the transmitter, making inspection, service, and calibration considerably simple.

The remote control reads the current gas concentration and can be used as an external display.

Integrated Alarm Saves Money on Ex-proof Alarm and Wiring!

The EC 28 D model shows the current gas concentration on-site at the display of the transmitter and also at GfG s GMA controller.

The EC 28 DAprovides additional bright alarm LEDs and a buzzer avoiding costs for a separate Ex-proof horn and an Ex-proof light. You also save money on wiring to connect the controller and alarm devices.

In combination with GfG's flexible control units, the EC 28 provides various possibilities for reliable and cost-effective gas monitoring.

Reliable Measurement, Increased Safety, Minimized Cost of Operation

Accurate sensors and integrated temperature compensation provide the highest measurement accuracy. Low maintenance requirements and the long sensor life reduce your cost of ownership.

Features

• Reading of gas concentration at transmitter display
• Ex-proof visual and audible alarms
• ATEX certificate II 1 G EEx ia IIC T4 / II 2 G EEx em [ib] IIC T4
• One-person calibration at transmitter using touch keys or remote control
• Plug-in smart sensor sensor replacement without opening the casing

Advantages

• Concentration display at transmitter or at remote control
• ATEX II 1 G EEx ia IIC T4 / II 2 G EEx dem [ib] IIC T4
• Ex-proof visual and audible alarms
• No need for expensive Ex-proof buzzer or wiring
• Easy sensor replacement by means of plug-in smart sensors
• Long sensor life
• Low service requirement
• Permanent status and function display at transmitter
• Adjustments without opening the casing using touch keys or remote control; easy handling even for hardto-reach transmitter positions

72-61ABXX-A GX-6100 Multigas Detector, LEL / O2 / H2S / CO / VOC's (0 - 4, 000 ppm PID) with alkaline battery pack by RKI Instruments

The GX-6100 is a powerful hand-held instrument capable of simultaneously monitoring up to 6 gases. In addition to the standard 4 confined space gases which include combustibles, O2, CO, & H2S, the GX-6100 has 2 additional smart channels that accept PID, PPM, IR or super toxic sensors. The updated GX-6100 can measure combustible gases in PPM range and %volume in the same monitor.

Equipped with a strong internal sample pump, a man-down alarm, a panic alarm, an LED flashlight, and large auto rotating LCD display, the GX-6100 can operate as a single gas PID unit or a multifunctional tool utilizing all 6 channels. The GX-6100 with a PID sensor will come equipped with a library of over 600 VOC gases to choose from as standard. Choosing from the library is easy with a personalized favorites list of 30 commonly used VOC's as well as a list of 8 of the most recently used VOC's. A benzene-specific version is available using a pre-filter tube for detecting low levels of benzene. Four PID sensors are available, 10.0 eV, 10.6 eV (low or high range), and 11.7 eV. Any combination of two PID sensors can be installed. GX-6100 PID sensors are also resistant to humidity.

The GX-6100 has a rugged design built for the nastiest environments. It is equipped with a removable impact-resistant rubber boot and a dust and water resistant enclosure with an IP-67 rating. With 5 bright LED lights on 3 sides of the instrument, alarms are easily seen from a variety of perspectives. With vibration and loud audible alarm, GX-6100 will easily alert users when needed.

Features

• Smallest 6 gas sample draw detector
• New 4-gas sensors with up to 3-year warranty
• 2 Interchangeable smart sensor slots
• TE sensor for %volume measurement of combustibles
• New ppm MOS CH4 and ppm MOS i-C4H10 sensors
• 4 PID options: 10.6 (2 ranges) eV, 10.0 eV, and 11.7 eV lamps
• Supports dual PID sensors
• PID library of over 600 VOCs
• Rapid sharing of emergency alerts via Bluetooth®
• Benzene specific version
• PPM Leak Check mode
• LEL sensor protection mode
• Man-down alarm & Panic alarm
• Auto display rotation
• Peak-bar display
• LED Light source
• Internal sample pump
• Light weight, small, rugged IP-67 design
• Interchangeable battery packs (Li-ion / alkaline)
• Operates up to 28 hours on Li-ion battery pack, 8 hours operation with alkaline pack
• Field replaceable sensors, batteries, filters and pump
• Intrinsically safe ATEX / IECEx / cCSAus (pending)

Applications

• Confined space entry
• Hazmat response teams
• Arson investigation
• Remediation sites
• Perimeter monitoring
• Leak detection
• Landfill monitoring
• Wing tank entry

*Please note we can only ship RKI products to customers within the United States

Simple to operate and reliable tight area gas detection adds more protection with enhanced features

5 gas protection with the Honeywell BW™

Made for confined or tight areas

Are you concerned with worker safety? Honeywell joins you in this concern, and this is the reason we designed the Honeywell BW™ Ultra. It is one of the easiest and most effective ways to maintain worker safety on the job. The Honeywell BW™ Ultra monitors and checks gases in small and confined areas. Honeywell technology gives you advanced sensors, increased comfort, connectivity, and it's easy to read. It is one of the toughest and more durable monitors available.

Why Choose the Honeywell BW™ Ultra?

• You can monitor gases remotely
• LCD screen is simple to use and easy to read
• Manage your instruments with TouchConnect™ technology
• 1-Series sensors give you enhanced reliability
• Better awareness for monitoring environments

Do you need the best possible gas monitoring for confined or tight spaces? Consider the pump driven Honeywell BW™ Ultra and here is why:

• Protect your people from five kinds of problem gases
• Keep up with the latest regulations
• Confidently enter confined areas with possible gas issues

A better way to prevent on the job gas-related incidents – the Honeywell BW™ Ultra. Here are some of its benefits:

• Monitor from remote locations
• Better gas safety in a user-friendly package. Confined or tight spaces are its specialty.
• Enhanced hole watch options
• Bigger LCD screen for easier readings
• 1-Series sensor delivers enhanced safety and dependability
• TouchConnect™ gives you faster instrument reading and management.

Internal pump runs continuously. This simplifies the process of taking in gases and analyzing them. Your instrument is very easy to operate, and it offers valuable protection from hazardous environments.

An innovative way to monitor dangerous gases in confined space. Simple and easy to read gives you outstanding protection.

If you have people working in a potentially volatile atmosphere, you need to keep constant watch on the gases in the air. The Honeywell BW™ Ultra makes monitoring very easy with its high-resolution screen. You have no delays so you can take action immediately to protect your crew.

Gas Detection on the Go

Your Honeywell BW™ Ultra is one of the toughest and most durable gas monitors on the market. You have a great deal of protection from dust ingress and moisture penetration (even in high-pressure spraying and total water submersion at 3.9 feet). It has a rating of IP66/68. Even if you accidentally abuse this unit, it can take a beating and keep on working. Works well in the dustiest and wettest of environments.

Ergonomic design is easy to use

You do not have to wear the Honeywell BW™ Ultra.

It is made for handheld operation as you check the safety of the atmosphere. This unit is one of the most comfortable detectors you can buy because it perfectly fits into the hand. The profile is nice and slim, and it does not weigh a lot. This is a good way to lessen the fatigue factor while increasing productivity.

It operates by just using a single button. This is the kind of experience Honeywell is famous for. Wearing your Honeywell BW™ Ultra is easy and perfect for working in confined areas. Because the pump is inside, your instrument stays in one position and moves when you move. No snagging or getting in the way.

5 Sensors are Better Than 4

Do you have more than one gas to monitor in an environment? Your Honeywell BW™ Ultra can sense these gases:

Oxygen
Hydrogen sulfide
Carbon monoxide
LEL – lower explosive limit levels

Maybe chlorine is a hazard where you work. Perhaps you have to watch conditions for sulfur dioxide levels. Are some of your workers around VOCs (volatile organic compounds)? You can choose a fifth selection for gas monitoring.

The Honeywell BW™ Ultra is a good choice for people working in water treatment facilities and chemical plants. Those in the marine and paper industries can also benefit because you have so many choices for gas monitoring.

Monitor possible dangerous situations in real-time for faster action when needed

Industrial businesses pay out a lot of money every year on safety issues like dangerous gases in the air. Often times, they spend more than they need to because they are not proactive with safety management.

With the help of equipment like the Honeywell BW™ Ultra, many volatile gas incidents can be avoided. It's user-friendly and simple to operate design makes it a breeze to use. In fact, you can keep someone just outside a dangerous area to monitor gases. This lets you take care of most issues before they become problems. It lowers work stress levels because your people know someone has their backs and they are safer and more productive.

Real-time remote monitoring for high risk workers

Just because the Honeywell BW™ Ultra is made for confined spaces doesn't mean you cannot use it anywhere. You only need the Honeywell Safety Communicator app to start taking important gas readings where needed, and this can be done remotely.

Do you need to monitor a high-risk area in a tight or small space? You can send vital readings via Bluetooth to your gas monitoring software from Honeywell. This info is easily accessed from control rooms or any remote location. This gives you an extra monitoring function in case of trouble or emergency issues.

Simple Design and Operation Simplifies Hole Watch

When you monitor vital gas readings where people are working you have their lives in your hands. There is no room for guesswork or using equipment which doesn't measure up to the task. Thanks to the Hole Watch function, your Honeywell BW™ Ultra can give you accurate and constant gas readings of a designated area. With Hole Watch you see all gas readings in real-time. For example, you also have a graph next to each gas so you can see immediate changes in concentrations. As soon as a hazardous gas gets close to dangerous levels, you can take the needed action to keep everyone safe from harm.

Only Honeywell lets You check gas levels as they happen

You can have the best people with the right kind of training, but if they have poorly designed gas monitoring equipment, they cannot do their jobs. They need the Honeywell BW™ Ultra.

Honeywell – setting the standard for sensor reliability

The 1-Series sensor was a product of a combined effort between Honeywell and City Technology, a worldwide producer of gas sensors for over four decades. This sensor came from the same technology that brought you the GasAlert detector with its 40XV oxygen sensor and the GasAlertMicroClip X3 with its 40xLL high quality sensor you can depend on this technology to give you the most accurate and dependable service.

Great Performance and no false alarms to worry about – even in high risk areas.

Our 1-Sensor is not large, but it is powerful.
This compact sensor delivers some of the most precise and accurate readings no matter what the ambient temperature is. For example, it performs just as well in extreme cold (-40C) as it does in very warm temperatures (60C). You get the same reliability even in the most extreme conditions.

Extended Sensor Life

Not all gas detectors can give you long service without interruption. In fact, some gas sensors wear out fast, and you have to replace them at the most inconvenient times. This costs money and valuable time on the job. When you buy the Honeywell BW™ Ultra, you can receive as much as 5 years (60 months) of service, and it comes with a full 3-year guarantee. This is the best way to maintain a lean and efficient operation without sacrificing quality.

Honeywell Technology – giving you The Honeywell BW™ Ultra for more uptime and lower costs: Bump Tests Made Simple

How often do you bump test your gas detectors? Do you need a docking station for the task? Many people do. However, with TouchConnect™ you do not need docking stations. It finds all your units in range and takes care of matters.

Do you have an entire fleet of Detectors to look after?

TouchConnect™ can do more than just Bump tests. Suppose you want to update your set points for dangerous gas level alarms. This is done automatically when you use the TouchConnect™ device.

How many detectors are in your fleet? The larger the fleet, the easier it is when you have TouchConnect™.
No docking station needed. Just send TouchConnect™ where you need it, and it handles the updating task thanks to its Bluetooth capabilities.

Are you monitoring many gases at once?

Some confined spaces have multiple risks due to a combination of dangerous gases. This is where the Honeywell BW™ Ultra is very handy. You can set it up to handle a wide range of gases like LEL, CO, H2S, and O2. But this is not all. You have the option of monitoring a fifth dangerous gas. For instance:

SO2 (Sulfur Dioxide)

NH3 (Ammonia)

CL2 (Chlorine)

VOCs (Volatile Organic Compounds)

CO2 (Carbon Dioxide)

NO2 (Nitrogen Dioxide)

HCN (Hydrogen Cyanide)

Inert Atmospheres Solutions

What is Intelligent Inert Mode from the Honeywell BW™ Ultra? Suppose you need to check for low levels of oxygen in the air. This is a dangerous condition and must be constantly monitored. The Honeywell BW™ Ultra can automatically adjust alarms for inert environments and for normal environments.

The Value of Versatility More than just confined areas

Use your Honeywell BW™ Ultra for dependable gas monitoring in the most confined areas you have. Yet, it also works well as an everyday gas detector.

Do you have people working around ammonia refrigeration systems or chlorine gas? Maybe someone uses solvents for cleaning and the danger of VOCs exists. You only need to remove the Honeywell BW™ Ultra's sampling hose, and it becomes a valuable piece of protection gear. This cuts your equipment costs.

The Honeywell BW™ Ultra protects your business and crew with its innovative technology

Do you need to protect your workers from dangerous gases? You can turn to Honeywell Industrial Safety for help. We are the leading source for industrial safety gear and equipment. You can depend on Honeywell for the latest in cost effective and high-quality personal protection gear for all kinds of uses.

We help you lower your safety gear costs, risk factors, and you can enjoy fewer downtime issues and a more productive workforce. We also offer safety administration and analytics in addition to our other safety and safety monitoring equipment.

Part Number: HU-X1W1H1M1Q1-B-N

72-2110RK-HR Rig Monitor System, with Beacon 110 Single Channel Controller, Hydrogen Sulfide (H2S) 0-100 ppm Sensor with Cal Cup/Splash Guard and 25 Cable, Horn/Strobe, and 50 Power Cable with Battery Clamps by RKI Instruments

RKI Instruments is proud to announce our new RM series continuous gas monitors. These monitors are specifically designed for detection of H2S around temporary drilling rigs. All units include our long-life plug in electrochemical H2S sensor, range 0-100 ppm. All cable connections are protected by rugged strain relief cord grips, and sensors are mounted in an explosion proof enclosure that includes a convenient mounting bracket.

Model Beacon 110RM: Based on our Beacon 110 single channel controller, this version includes the standard Beacon 110 in NEMA 4X enclosure, outfitted with the sensor and splash/mud guard on a 25 ft. cable. Included is a 50 ft. power cable with battery clamps for connection to a user-provided 12 VDC battery. Also included is a powerful horn / strobe mounted directly to the Beacon 110. Standard features of the Beacon 110 include 4-20 ma and relay outputs, large easy to read LCD display with backlight, and simple calibration and setup routines through the front panel display and controls.

Features:

• H2S detection, 0-100 ppm range
• Explosion proof enclosure
• Convenient mounting bracket
• Easily installed and moveable
• Battery clamps for easy connection
• Powerful horn and strobe

Applications:

• Workover rigs
• Drilling rigs
• Fractionators
• Water reclamation
• Pumpers
• Water haulers
• Exploration

*Please note we can only ship RKI products to customers within the United States

Max XT (internal pump included)

The Max XT confined space kit (CSK) includes:

Part Number: XTXWHMYNACS

4021-1 RAM 4021 Respiratory Air Monitor, Carbon Monoxide (CO) and Oxygen (O2) by GfG

The RAM 4021 AutoCal® series is the unit of choice where specific and accurate measurement of carbon monoxide, oxygen or dew-point levels are required. Designed to meet OSHA requirements for monitoring of Grade D respirable air, this unit is equipped with a reliable electrochemical sensor that accurately indicates the level of carbon monoxide on an illuminated liquid crystal display. Adding versatility, this unit offers optional oxygen or dew point sensors for applications where detection or measurement is needed.

Calibration and maintenance are simple with our innovative AutoCal® system. Additional features including alarm relay contacts, user adjustable alarm point, low flow alarm indicator and many more make this unit an intelligent choice. The RAM 4021 is available in four models, the 4021 (CO), 4021-1 (CO and O2), 4021-DPX (CO and dew point levels) and 4021-PR (CO and additional relay to signal power loss to monitor, complies with newest NFPA regulation). All models may be purchased with or without airline filter systems

Respiratory air specifications

All GfG Instrumentation RAM Instruments satisfy the requirements of OSHA rule 29 CFR 1910.134 (d) (2) (ii) for carbon monoxide monitoring. They will also monitor Grade E air, generally specified for breathing air in cylinders (SCBA).

Wall mounted filter panel option

The 25, 50 and 100 CFM panels filter out dangerous toxins from supplied air sources and ensure clean, breathable air. The threestage filter system efficiently removes particulates, oil vapors and hydrocarbons from an air supply. After filtration, the regulator sets the pressure for the respiratory equipment and the manifold assembly provides multiple outlets for airline hose quick connections. The model 8025 panel includes two user female quick connect outlets; the 8050 includes four, and the 8100 includes eight. A 1/2" FPT connection is standard on all 50 and 100 CFM panels, and a 3/8" FPT connection is standard on all 25 CFM panels.

Features

• Continuous compressed air CO monitor
• Integrated dew point measurement
• Robust easy-to-operate design

Features

• RAM 4021 Monitor
• Carbon monoxide (CO) sensor
• Other sensors (as specified)
• Manual

2811-722-003 EC 28 Gas Transmitter with Sensor, Nitrogen Dioxide (NO2), Display / Alarm by GfG

Advanced Technology

Wherever hazards are expected, the EC 28 transmitter and GfG s proven monitoring systems are the right choice for reliable surveillance. The ATEX-certified design, an integrated, Ex-proof buzzer, and bright alarm LEDs provide the highest safety in hazardous areas by including visual and audible alarms. The gas alarm not only alerts the person in the control room of hazards, but also the person on-site.

Easy handling

Smart sensor technology allows a user to install the transmitter or to replace a sensor within a few seconds just plug the sensor into the transmitter. Adjustments are done directly at the transmitter using touch keys or with the remote control (one-person calibration).

Remote Control RC2

Ammonia and hydrogen are lighter than air. With the transmitter installed close to the ceiling, GfG can provide permanently connected cables with plugs for the remote control, which allow the user to do all adjustments without having to climb a ladder. In addition, one remote control can be used for several transmitters, which helps cut costs and increase efficiency.

The remote control display is always identical to that of the transmitter, making inspection, service, and calibration considerably simple.

The remote control reads the current gas concentration and can be used as an external display.

Integrated Alarm Saves Money on Ex-proof Alarm and Wiring!

The EC 28 D model shows the current gas concentration on-site at the display of the transmitter and also at GfG s GMA controller.

The EC 28 DAprovides additional bright alarm LEDs and a buzzer avoiding costs for a separate Ex-proof horn and an Ex-proof light. You also save money on wiring to connect the controller and alarm devices.

In combination with GfG's flexible control units, the EC 28 provides various possibilities for reliable and cost-effective gas monitoring.

Reliable Measurement, Increased Safety, Minimized Cost of Operation

Accurate sensors and integrated temperature compensation provide the highest measurement accuracy. Low maintenance requirements and the long sensor life reduce your cost of ownership.

Features

• Reading of gas concentration at transmitter display
• Ex-proof visual and audible alarms
• ATEX certificate II 1 G EEx ia IIC T4 / II 2 G EEx em [ib] IIC T4
• One-person calibration at transmitter using touch keys or remote control
• Plug-in smart sensor sensor replacement without opening the casing

Advantages

• Concentration display at transmitter or at remote control
• ATEX II 1 G EEx ia IIC T4 / II 2 G EEx dem [ib] IIC T4
• Ex-proof visual and audible alarms
• No need for expensive Ex-proof buzzer or wiring
• Easy sensor replacement by means of plug-in smart sensors
• Long sensor life
• Low service requirement
• Permanent status and function display at transmitter
• Adjustments without opening the casing using touch keys or remote control; easy handling even for hardto-reach transmitter positions

059-A110-300 MiniRAE Lite+ Portable Handheld VOC Monitor - 10.6 eV Lamp, Li-Ion / Universal Charger, Accessories Kit by RAE Systems

The MiniRAE Lite is the most reliable handheld volatile organic compound (VOC) monitor on the market. Its photoionization detector's (PID) range of 0 to 5,000 ppm makes it an ideal instrument for applications ranging from environmental to construction.

Monitor only includes

• MiniRAE Lite Monitor, Model PGM-7300
• RAE Systems 10.6 eV UV lamp
• Flex-I-Probe
• External filter
• Green rubber boot
• Alkaline battery adapter
• Lamp cleaning kit
• Tool kit
• Lithium-ion (Li-ion) battery, if specified with universal AC/DC charger and international plug kit
• Travel charger, if specified
• Universal wall adapter, if specified
• Operation & Maintenance manual
• Soft leather carrying case

Monitor with accessories kit adds

• Hard transport case with pre-cut foam padding
• 5 Porous metal filters and O-rings
• Organic vapor zeroing kit
• Gas outlet port adapter and tubing

Optional calibration kit adds

• 100 ppm isobutylene calibration gas, 34L
• Calibration regulator and flow controller

Key Features

• Proven PID technology-The patented sensor provides the following unique features: 3-second response time, Range up to 5,000 ppm, Humidity compensation
• Designed for service-Easy access to lamp and sensor in seconds without tools
• Big graphic display for easy overview of concentration
• Field-interchangeable battery pack, replaceable in seconds without tools
• Integrated flashlight for better visibility in low light
• Multi-language support with 12 languages encoded
• Rugged housing withstands use in harsh environments: IP-65 design and Strong, protective removable rubber boot

Additional Advantages

• Duty-cycling™ lamp and sensor auto-cleaning technology
• Tough, flexible inlet Flexi-Probe™
• Large keys are operable with 3 layers of gloves
• Strong, built-in sample pump draws up to 100' (30m) horizontally or vertically
• Loud, 95 dB audible alarm
• Bright red flashing visible alarm
• Interchangeable drop-in Lithium-ion and alkaline battery packs
• 3-year 10.6 eV lamp warranty

Measuring Range: -60 to +50 °C tpd
Measuring Range: 0 to +100%RH

M5-XW0Y-R-D-D-B-N-00 GasAlertMicro 5 Detector % LEL, O2, H2S, CO - Rechargeable Battery - Black Housing by BW Technologies

The GasAlertMicro 5 Series is the most customizable gas monitoring series on the market. With an extensive selection of models, user options, and instrument settings, this multi-gas detector series is an industry leader. BW Technologies by Honeywell recognizes that not all worksites can operate with a one size fits all model of gas detection devices. With the introduction of the GasAlertMicro 5 Series multi-gas detectors, worksites, managers, and users can utilize the customizable features to ensure that the instrument meets their specific worksite needs.

GasAlertMicro 5 Series models

This multi-gas monitor series is available in several models: the standard toxic gas model, a PID model for detection of VOCs, or an IR model for CO2 detection. The unit accurately and reliably identifies up to five atmospheric hazards simultaneously and can rapidly switch from diffusion mode to the optional integrated pump.

Each model of GasAlertMicro 5 Series has several distinct features. With the GasAlertMicro 5 Series, the standard toxic gas model, users can monitor several standard gases with a plug in electrochemical cell sensor and catalytic cell sensor and a typical battery life of 20 hours (AA Alkaline rechargeable). The GasAlertMicro 5 PID is standard with several gas detections, a plug in electrochemical cell sensor and photoionization detector, and a battery life of approximately 15 hours (AA Alkaline rechargeable). Finally, the GasAlertMicro 5 IR features specific gas detection ranges, a plug in electrochemical cell sensor, a catalytic cell sensor, and an infrared sensor for carbon dioxide monitoring. This model also has a battery life of approximately 15 and AA Alkaline rechargeable batteries. For more information about available sensor configurations, please contact BW Technologies by Honeywell.

Exclusive features

Each GasAlertMicro 5 Series device features several exclusive features including a triple alarm system, raised glove-friendly buttons, a large easy to read display, stainless steel alligator clip, visual filter inspection, and automatic activation tests. When the unit is activated, the gas detector will automatically test for sensor integrity, circuitry, and battery. This continuous and reliable testing process ensures that the integrity and dependability of the device is never a concern.

BW Technologies by Honeywell also recognizes the unique needs of the various industries with environmental hazards. With each industry anticipating a separate set of possible dangers, the ability to customize safety devices is critical.

Users and worksite managers will be comforted to know their GasAlertMicro 5 series model is fully customizable. Customizable features include STEL intervals, TWA methods, sensor activation, alarms, display settings, record keeping, pumps, combustible gas measurements, start up calibration, backlights, activation modes, calibration levels, daily bump tests, and languages. To protect the integrity of the user settings and the safety of the gas monitoring device, the GasAlertMicro 5 device features a passcode function to prevent unauthorized manipulation of settings.

Accessories

The GasAlertMicro 5 Series is also compatible with BW's MicroDock II automatic test and calibration system. Users may purchase additional accessories to help fully tailor the gas detection unit to their needs. Accessories include an integral pump and battery charger, a confined space kit, a belt holster, and a collapsible sampling probe.

Part Number: M5XW0YRDDBN00

M5-XW0Y-A-D-D-Y-N-00 GasAlertMicro 5 Detector % LEL, O2, H2S, CO - Alkaline Batteries - Yellow Housing by BW Technologies

The GasAlertMicro 5 Series is the most customizable gas monitoring series on the market. With an extensive selection of models, user options, and instrument settings, this multi-gas detector series is an industry leader. BW Technologies by Honeywell recognizes that not all worksites can operate with a one size fits all model of gas detection devices. With the introduction of the GasAlertMicro 5 Series multi-gas detectors, worksites, managers, and users can utilize the customizable features to ensure that the instrument meets their specific worksite needs.

GasAlertMicro 5 Series models

This multi-gas monitor series is available in several models: the standard toxic gas model, a PID model for detection of VOCs, or an IR model for CO2 detection. The unit accurately and reliably identifies up to five atmospheric hazards simultaneously and can rapidly switch from diffusion mode to the optional integrated pump.

Each model of GasAlertMicro 5 Series has several distinct features. With the GasAlertMicro 5 Series, the standard toxic gas model, users can monitor several standard gases with a plug in electrochemical cell sensor and catalytic cell sensor and a typical battery life of 20 hours (AA Alkaline rechargeable). The GasAlertMicro 5 PID is standard with several gas detections, a plug in electrochemical cell sensor and photoionization detector, and a battery life of approximately 15 hours (AA Alkaline rechargeable). Finally, the GasAlertMicro 5 IR features specific gas detection ranges, a plug in electrochemical cell sensor, a catalytic cell sensor, and an infrared sensor for carbon dioxide monitoring. This model also has a battery life of approximately 15 and AA Alkaline rechargeable batteries. For more information about available sensor configurations, please contact BW Technologies by Honeywell.

Exclusive features

Each GasAlertMicro 5 Series device features several exclusive features including a triple alarm system, raised glove-friendly buttons, a large easy to read display, stainless steel alligator clip, visual filter inspection, and automatic activation tests. When the unit is activated, the gas detector will automatically test for sensor integrity, circuitry, and battery. This continuous and reliable testing process ensures that the integrity and dependability of the device is never a concern.

BW Technologies by Honeywell also recognizes the unique needs of the various industries with environmental hazards. With each industry anticipating a separate set of possible dangers, the ability to customize safety devices is critical.

Users and worksite managers will be comforted to know their GasAlertMicro 5 series model is fully customizable. Customizable features include STEL intervals, TWA methods, sensor activation, alarms, display settings, record keeping, pumps, combustible gas measurements, start up calibration, backlights, activation modes, calibration levels, daily bump tests, and languages. To protect the integrity of the user settings and the safety of the gas monitoring device, the GasAlertMicro 5 device features a passcode function to prevent unauthorized manipulation of settings.

Accessories

The GasAlertMicro 5 Series is also compatible with BW's MicroDock II automatic test and calibration system. Users may purchase additional accessories to help fully tailor the gas detection unit to their needs. Accessories include an integral pump and battery charger, a confined space kit, a belt holster, and a collapsible sampling probe.

Part Number: M5XW0YADDYN00

0028-8002 Tru Pointe 1100 kit with noise-attenuating headphones by Bacharach

The MSA Bacharach Tru Pointe® series products are advanced digital ultrasonic inspection systems used by maintenance personnel for mechanical inspections, troubleshooting and PPM (preventative and predictive maintainence) or scheduled maintenance in a variety of industries and ideal for tanks,enclosures, building doors & windows, automobile windows & windshields, walk-in coolers, clean rooms ship hatches and compartments.

The principle of operation of the Tru Pointe® series product line is based on the detection of ultrasonic acoustics generated by leaks produced by the turbulent flow of gases and liquids, inaudible to humans, and pinpoints them at the speed of sound. Carrying multiple patents, the Tru Pointe® Series incorporates independent sensors that identify external airborne leaks and internal structural leaks. Such as leaks in steam traps, valves, solenoids, pumps and hydraulics, compressed air, refrigerants, nitrogen, CO2, helium, vacuum and many others sources for accurate, repeatable results, saving time and money for every HVAC/R technician and contractor.

Features

• Ultrasonic to detect any gas leaks
• Sensitivity Adjustments
• Visual indication
• Unique Volume control
• Pocket Sized
• Dual Audio Intensity Displays

Benefits

• Capable of detecting a 5 PSI leak out of a 0.005" hole, 30 to 40 feet away. Ideal for stream trap testing and bearing wear detection. Unaffected by wind or temperature fluctuations. Find a leak as small as 2.5-3 oz./yr (84 g/yr)
• Unaffected by other gases, even at high-concentrations or sounds in the test area.
• Ten-step LED Bar Graphs shows signal strength.
• True sound reproduction ensures fast recognition of leaks.
• Easy to carry
• Easily see bar graph or alpha/numeric displays

VN01706 X-am 5800 Multi-Gas Detector with CATEX,O2/H2S-LC,CL2,CO,NIMH by Draeger

The X-am® 5800 multi-gas detector measures up to six gases and is equipped with a particularly shock-resistant CatEx sensor. With the Drager Gas Detection Connect software, it offers live data transmission and powerful asset management. Designed for personal monitoring, the X-am 5800 offers you the highest level of safety at a low cost of ownership.

Benefits

Powerful data analysis in the cloud

Safety and efficiency thanks to its networking capability: Transfer your recorded data directly and conveniently via Bluetooth® to a smartphone and from there to the backend of the Gas Detection Connect software. As an alternative, you can also transfer the data directly to the cloud with the X-dock test station. This way, you have secure access to your data and its analysis at any time and from anywhere – simply via your internet browser.

Comfortable asset management

With the X-am 5800 you can manage your fleet of equipment comfortably and efficiently in daily use. Save operating costs and time through fast tests by using the automatic test station X-dock with low gas consumption or a pure mechanical bump test station. Further advantages: powerful asset management via our smart software solution, convenient firmware updates in the X-dock, an optional RFID transponder and individual colour marking of the devices. Few, easy-to-replace spare parts – including the power supply – and sensors ensure that your devices remain operational for many years. Drager provides a 4-year manufacturer's warranty on the basic device. Existing, compatible accessories from its predecessor, the X-am® 2500/5000/5600 can continue to be used.

Tailor-made gas monitoring

Small and lightweight: The X-am 5800 is comfortable to wear and easy to use even with gloves on thanks to its large buttons. The display clearly shows important information such as gas readings, alarms and time. The green D-light indicates that the unit is ready for use. All this, plus the completely language-free icon based user interface, makes it pleasantly simple to use and familiarise yourself with. For your added safety, its oxygen channel has four alarm thresholds – real pre-alarms and main alarms for falling and rising concentrations. Approved for use in Ex zone 0, it has also been tested according to protection class IP 68.

Powerful sensors

The new CatEx sensor offers you even more advantages: readiness for calibration within seconds, extreme robustness against shocks and the measurement of flammable vapours – such as petrol, diesel and nonane. You can also set the measurement gas to methane, propane, hydrogen, and many other gases. The performance is complemented by Drager's simple cross calibration concept, in which the measurement gas, calibration gas and bump test gas can be specified individually. Upon testing, the X-am 5800 then takes over the necessary conversions. The sensor is target to meet the demanding requirements of the new IEC standard 60079-29-1 (International Electrotechnical Commission).

At the same time, the CatEx sensor is resistant to poisoning substances such as silicones and other harmful substances. This combination of properties is exceptional. With years of experience in sensor technology, Drager develops and produces the sensors itself, including the powerful and durable electrochemical sensors in the XXS format. Your advantage: sensors and device are perfectly matched to each other – saving you operating costs. We are currently developing a durable, power-saving infrared sensor to measure flammable gases and vapours and/or carbon dioxide, as well as a photo-ionisation detector sensor for measuring volatile organic compounds (VOCs). These can be used instead of the CatEx sensor.

Focus on sustainability

During the development of the X-am 5800, great importance was given to sustainability. The optimised Drager Sensors and the rechargeable power supply, which can be easily replaced with one screw, ensure it has a long service life. Almost all spare parts can be replaced by trained users, while all remaining parts can be repaired by Drager Service. Furthermore, existing accessories from the previous series can still be used. Environmental protection has also been taken into account in the technical documentation and packaging: Designed to save paper, when you order two or more units, we can reduce the number of instruction manuals supplied if you order the modular version. For your convenience, Drager also takes back old devices and ensures that they are recycled properly.

VN01707 X-am 5800 Multi-Gas Detector with CATEX,O2/H2S-LC,CO,NH3,NIMH by Draeger

The X-am® 5800 multi-gas detector measures up to six gases and is equipped with a particularly shock-resistant CatEx sensor. With the Drager Gas Detection Connect software, it offers live data transmission and powerful asset management. Designed for personal monitoring, the X-am 5800 offers you the highest level of safety at a low cost of ownership.

Benefits

Powerful data analysis in the cloud

Safety and efficiency thanks to its networking capability: Transfer your recorded data directly and conveniently via Bluetooth® to a smartphone and from there to the backend of the Gas Detection Connect software. As an alternative, you can also transfer the data directly to the cloud with the X-dock test station. This way, you have secure access to your data and its analysis at any time and from anywhere – simply via your internet browser.

Comfortable asset management

With the X-am 5800 you can manage your fleet of equipment comfortably and efficiently in daily use. Save operating costs and time through fast tests by using the automatic test station X-dock with low gas consumption or a pure mechanical bump test station. Further advantages: powerful asset management via our smart software solution, convenient firmware updates in the X-dock, an optional RFID transponder and individual colour marking of the devices. Few, easy-to-replace spare parts – including the power supply – and sensors ensure that your devices remain operational for many years. Drager provides a 4-year manufacturer's warranty on the basic device. Existing, compatible accessories from its predecessor, the X-am® 2500/5000/5600 can continue to be used.

Tailor-made gas monitoring

Small and lightweight: The X-am 5800 is comfortable to wear and easy to use even with gloves on thanks to its large buttons. The display clearly shows important information such as gas readings, alarms and time. The green D-light indicates that the unit is ready for use. All this, plus the completely language-free icon based user interface, makes it pleasantly simple to use and familiarise yourself with. For your added safety, its oxygen channel has four alarm thresholds – real pre-alarms and main alarms for falling and rising concentrations. Approved for use in Ex zone 0, it has also been tested according to protection class IP 68.

Powerful sensors

The new CatEx sensor offers you even more advantages: readiness for calibration within seconds, extreme robustness against shocks and the measurement of flammable vapours – such as petrol, diesel and nonane. You can also set the measurement gas to methane, propane, hydrogen, and many other gases. The performance is complemented by Drager's simple cross calibration concept, in which the measurement gas, calibration gas and bump test gas can be specified individually. Upon testing, the X-am 5800 then takes over the necessary conversions. The sensor is target to meet the demanding requirements of the new IEC standard 60079-29-1 (International Electrotechnical Commission).

At the same time, the CatEx sensor is resistant to poisoning substances such as silicones and other harmful substances. This combination of properties is exceptional. With years of experience in sensor technology, Drager develops and produces the sensors itself, including the powerful and durable electrochemical sensors in the XXS format. Your advantage: sensors and device are perfectly matched to each other – saving you operating costs. We are currently developing a durable, power-saving infrared sensor to measure flammable gases and vapours and/or carbon dioxide, as well as a photo-ionisation detector sensor for measuring volatile organic compounds (VOCs). These can be used instead of the CatEx sensor.

Focus on sustainability

During the development of the X-am 5800, great importance was given to sustainability. The optimised Drager Sensors and the rechargeable power supply, which can be easily replaced with one screw, ensure it has a long service life. Almost all spare parts can be replaced by trained users, while all remaining parts can be repaired by Drager Service. Furthermore, existing accessories from the previous series can still be used. Environmental protection has also been taken into account in the technical documentation and packaging: Designed to save paper, when you order two or more units, we can reduce the number of instruction manuals supplied if you order the modular version. For your convenience, Drager also takes back old devices and ensures that they are recycled properly.

M5-XW0Y-R-D-0-Y-N-00 GasAlertMicro 5 Detector %LEL, O2, H2S, CO - NiMH Battery by BW Technologies

The GasAlertMicro 5 Series is the most customizable gas monitoring series on the market. With an extensive selection of models, user options, and instrument settings, this multi-gas detector series is an industry leader. BW Technologies by Honeywell recognizes that not all worksites can operate with a one size fits all model of gas detection devices. With the introduction of the GasAlertMicro 5 Series multi-gas detectors, worksites, managers, and users can utilize the customizable features to ensure that the instrument meets their specific worksite needs.

GasAlertMicro 5 Series models

This multi-gas monitor series is available in several models: the standard toxic gas model, a PID model for detection of VOCs, or an IR model for CO2 detection. The unit accurately and reliably identifies up to five atmospheric hazards simultaneously and can rapidly switch from diffusion mode to the optional integrated pump.

Each model of GasAlertMicro 5 Series has several distinct features. With the GasAlertMicro 5 Series, the standard toxic gas model, users can monitor several standard gases with a plug in electrochemical cell sensor and catalytic cell sensor and a typical battery life of 20 hours (AA Alkaline rechargeable). The GasAlertMicro 5 PID is standard with several gas detections, a plug in electrochemical cell sensor and photoionization detector, and a battery life of approximately 15 hours (AA Alkaline rechargeable). Finally, the GasAlertMicro 5 IR features specific gas detection ranges, a plug in electrochemical cell sensor, a catalytic cell sensor, and an infrared sensor for carbon dioxide monitoring. This model also has a battery life of approximately 15 and AA Alkaline rechargeable batteries. For more information about available sensor configurations, please contact BW Technologies by Honeywell.

Exclusive features

Each GasAlertMicro 5 Series device features several exclusive features including a triple alarm system, raised glove-friendly buttons, a large easy to read display, stainless steel alligator clip, visual filter inspection, and automatic activation tests. When the unit is activated, the gas detector will automatically test for sensor integrity, circuitry, and battery. This continuous and reliable testing process ensures that the integrity and dependability of the device is never a concern.

BW Technologies by Honeywell also recognizes the unique needs of the various industries with environmental hazards. With each industry anticipating a separate set of possible dangers, the ability to customize safety devices is critical.

Users and worksite managers will be comforted to know their GasAlertMicro 5 series model is fully customizable. Customizable features include STEL intervals, TWA methods, sensor activation, alarms, display settings, record keeping, pumps, combustible gas measurements, start up calibration, backlights, activation modes, calibration levels, daily bump tests, and languages. To protect the integrity of the user settings and the safety of the gas monitoring device, the GasAlertMicro 5 device features a passcode function to prevent unauthorized manipulation of settings.

Accessories

The GasAlertMicro 5 Series is also compatible with BW's MicroDock II automatic test and calibration system. Users may purchase additional accessories to help fully tailor the gas detection unit to their needs. Accessories include an integral pump and battery charger, a confined space kit, a belt holster, and a collapsible sampling probe.

Part Number: M5XW0YRD0YN00

GD-70DP-NF3 GD-70D Sample Drawing Sensor/Transmitter for Nitrogen Trifluoride (NF3), 0 - 30 ppm, Includes Pyrolyzer by RKI Instruments

RKI Instruments has been making high quality gas detection and monitoring units for over 15 years. With an emphasis on safety and reliability, RKI Instruments excels at providing the best products in gas detection and sensor technology on the market. Every year, RKI strives to improve its product offering and scours the globe for the latest technologies and innovative designs. With the introduction of the GD-70D Series Intelligent Gas Detector, employers and workplace safety managers can feel confident that they have purchased a reliable detector that is built to last.

GD-70D Series Intelligent Gas Detector

The GD-70D Series Intelligent Gas Detector is a new smart gas detection transmitter that monitors combustibles, oxygen, and a wide range of toxic gases. The unit can be used as a standalone device, integrated with other PLC systems, or integrated with RKI's Beacon series of single and multi-channel controllers. Its common platform integrates numerous detection methods and requires very little maintenance.

Exclusive Features

The plug and play intelligent sensors make for easy setup and calibration by internally retaining calibration and sensor data. This allows workers to replace sensors while in the field without the need to reprogram the equipment. For little maintenance and optimal reliability, the internal technology automatically adjusts for long-term zero and span drift. The pump flow is also self-tuning for low maintenance functioning. In general, the smart sensors use electrochemical cell detection, semiconductor detection, pyrolysis-particle detection, galvanic cell detection, and catalytic combustion detection.

The GD-70D Series features a large LCD display that easily reads all notifications and provides a color coded graph for alarm status (first and second alarms are red, and fault alarms are yellow). The LCD screen displays the pyrolyzer connection, gas concentration, detection unit of measurement, the detected gas, the maintenance status, sensor identification, the flow rate, a graph of gas concentration, error codes, and alarm points. All operational settings are completely user adjustable from the front panel. The unit also has a self-diagnosing function which detects sensor trouble and system failure. The Intelligent Gas Detector has a convenient troubleshoot feature through its firmware. This allows users to investigate and resolve their own equipment issues while minimizing maintenance costs.

Specifications

The Intelligent Gas Detector is a convenient size for workplace and wall space efficiency with dimensions of 2.8 D x 4.7 H x 5.9 D and weighs approximately 2 pounds. It can be mounted to a wall easily with a base plate and 2 or 3 screws. Sensor replacements and pump replacements can be performed quick and easily without tools.

*Please note we can only ship RKI products to customers within the United States

4021-DPX-PR RAM 4021 Respiratory Air Monitor, Carbon Monoxide (CO) and Dew Point, Complies with NFPA 99 C-26 (5.1.3.5-15) by GfG

The RAM 4021 AutoCal® series is the unit of choice where specific and accurate measurement of carbon monoxide, oxygen or dew-point levels are required. Designed to meet OSHA requirements for monitoring of Grade D respirable air, this unit is equipped with a reliable electrochemical sensor that accurately indicates the level of carbon monoxide on an illuminated liquid crystal display. Adding versatility, this unit offers optional oxygen or dew point sensors for applications where detection or measurement is needed.

Calibration and maintenance are simple with our innovative AutoCal® system. Additional features including alarm relay contacts, user adjustable alarm point, low flow alarm indicator and many more make this unit an intelligent choice. The RAM 4021 is available in four models, the 4021 (CO), 4021-1 (CO and O2), 4021-DPX (CO and dew point levels) and 4021-PR (CO and additional relay to signal power loss to monitor, complies with newest NFPA regulation). All models may be purchased with or without airline filter systems

Respiratory air specifications

All GfG Instrumentation RAM Instruments satisfy the requirements of OSHA rule 29 CFR 1910.134 (d) (2) (ii) for carbon monoxide monitoring. They will also monitor Grade E air, generally specified for breathing air in cylinders (SCBA).

Wall mounted filter panel option

The 25, 50 and 100 CFM panels filter out dangerous toxins from supplied air sources and ensure clean, breathable air. The threestage filter system efficiently removes particulates, oil vapors and hydrocarbons from an air supply. After filtration, the regulator sets the pressure for the respiratory equipment and the manifold assembly provides multiple outlets for airline hose quick connections. The model 8025 panel includes two user female quick connect outlets; the 8050 includes four, and the 8100 includes eight. A 1/2" FPT connection is standard on all 50 and 100 CFM panels, and a 3/8" FPT connection is standard on all 25 CFM panels.

Features

• Continuous compressed air CO monitor
• Integrated dew point measurement
• Robust easy-to-operate design

Features

• RAM 4021 Monitor
• Carbon monoxide (CO) sensor
• Other sensors (as specified)
• Manual

Sperian Biosystems PhD6 Multigas Detector

The Biosystems PhD6 Multigas Detector is the latest development in compact multigas detection systems. The detector is proven to be compact, efficient, and cost effective. With dual alarm systems featuring ultra-loud audible indicators and ultra-bright LED visual indicators, users and those nearby are always notified when potential hazards may be present. When developing this detector, the engineers at SperianProtection Instrumentation also developed an express docking station that would reduce calibration time and labor costs. The detection and docking station help users meet record keeping requirements and reduce the risks of human error. With the SperianBiosystems PhD6 Multigas Detector, users can rest assured that they are receiving the very best in gas detection technology.

Key Features

The Biosystems PhD6 Multigas Detector is compatible with over 19 sensor choices including:

• PID
• IR-CO2
• IR-CH4
• Conventional LEL
• Oxygen
• 15 different toxic gas sensors

The gas detector is encased in a durable solid polycarbonate case with a rubber over mold for easy handling. It has an interchangeable battery pack with both Alkaline and Li-Ion rechargeable batteries. Both battery types offer up to 24 hour run times. The unit features dual audible alarms at 92 decibels and front and side ultra-bright LED visual alarms to ensure that the user and those nearby are always notified of possible hazardous conditions. For easy interpretation, the detector has an easy to read status bar and large LCD display that notifies users of the device s functionality and calibration due date. Using the menu options, users can easily adjust a variety of the instrument s settings.

Automatic Docking Station

When developing the PhD6 Multigas Detector, product developers also created an automatic docking station (Biosystems IQ6 Express Dock) to be fully compatible with the detector. The docking station aims to reduce labor time and costs by fully automating certain aspects of instrument maintenance including calibration, functionality testing, and record keeping. Using the Express Dock, users can maintain compliance with recordkeeping requirements by simply docking the detector in the station. The station will automatically perform a variety of operations without user intervention.

Sperian Protection Instrumentation and Honeywell

Sperian Protection Instrumentation is a global leader in personal safety equipment. The company was recently acquired by Honeywell, another global leader in technology and innovation. As a Fortune 100 company, Honeywell has a vested interest in maintaining its reputation as a developer of efficient and reliable safety equipment. Sperian Protection Instrumentation helps to expand Honeywell s personal safety offerings while advancing their position in the American market. By purchasing a product by Sperian and Honeywell, customers can be assured they are receiving the very best in safety technology and equipment.

WD-35660-80 PCD380 Waterproof 3-Channel pH, ORP, Conductivity, TDS, Resistivity, Salinity, and DO Smart Handheld Meter Kit by Oakton

Get easy-to-read and accurate readings with auto-hold, auto-stable, and real-time measurements with stability indicators. The Environmental Express® Oakton® 300 series multiparameter meters utilize smart sensor technology with sensor heads that feature a built-in digital circuit for automatic sensor recognition. Sensor information including sensor ID, calibration data, and measurement setup is stored in sensor head and viewable on the meter display when sensor is connected.

Sensor heads are easy to connect and disconnect with waterproof push-lock connector. Sensor cartridges (pH and EC) are replaceable for a cost-efficient and environmentally friendly system. Blue LED light on the sensor head functions as a reading stability indicator, flashing until the reading is stable.

Meter stores up to 10,000 data sets with date-and-time stamp for accurate and easy analysis. Quickly transfer data from meter to computer seamlessly via USB cable or wirelessly via Wi-Fi.

Easily take measurements and conveniently store meter and electrodes with built-in foldable stand on the back of the meter. Three grooves on the meter serve as electrode holders, to hold up to three electrodes simultaneously.

• Extremely versatile—the meter automatically recognizes which sensors you plug in so you can easily switch parameters whenever you want
• Select a meter with the number of channels you need (1, 2, or 3) and the sensors for the parameters you are measuring (pH, conductivity, or DO)
• Eliminate downtime with smart sensors that feature built-in calibration and measurement information
• Rugged, waterproof and dustproof housing with an IP67 rating for use in any environment
• Nonslip ergonomic design is comfortable to use and shock-proof and scratch-resistant
• Easily view measurements with large color graphic TFT-LCD, even in dim lighting or bright outdoor sunlight
• Download and analyze up to 10,0000 data points easily with micro USB
• Accurately measure pH, ORP, conductivity, TDS, resistivity, salinity, dissolved oxygen, and temperature

Includes

meter, pH sensor head, pH sensor cartridge, pH buffer set, EC sensor head, EC sensor cartridge, conductivity standards set, DO sensor with cap, four AA batteries, wireless SD card, and carrying case.

2811-724-001M EC 28 Gas Transmitter with MODBUS, Nitrogen Oxide (NO), No Display by GfG

Advanced Technology

Wherever hazards are expected, the EC 28 transmitter and GfG s proven monitoring systems are the right choice for reliable surveillance. The ATEX-certified design, an integrated, Ex-proof buzzer, and bright alarm LEDs provide the highest safety in hazardous areas by including visual and audible alarms. The gas alarm not only alerts the person in the control room of hazards, but also the person on-site.

Easy handling

Smart sensor technology allows a user to install the transmitter or to replace a sensor within a few seconds just plug the sensor into the transmitter. Adjustments are done directly at the transmitter using touch keys or with the remote control (one-person calibration).

Remote Control RC2

Ammonia and hydrogen are lighter than air. With the transmitter installed close to the ceiling, GfG can provide permanently connected cables with plugs for the remote control, which allow the user to do all adjustments without having to climb a ladder. In addition, one remote control can be used for several transmitters, which helps cut costs and increase efficiency.

The remote control display is always identical to that of the transmitter, making inspection, service, and calibration considerably simple.

The remote control reads the current gas concentration and can be used as an external display.

Integrated Alarm Saves Money on Ex-proof Alarm and Wiring!

The EC 28 D model shows the current gas concentration on-site at the display of the transmitter and also at GfG s GMA controller.

The EC 28 DAprovides additional bright alarm LEDs and a buzzer avoiding costs for a separate Ex-proof horn and an Ex-proof light. You also save money on wiring to connect the controller and alarm devices.

In combination with GfG's flexible control units, the EC 28 provides various possibilities for reliable and cost-effective gas monitoring.

Reliable Measurement, Increased Safety, Minimized Cost of Operation

Accurate sensors and integrated temperature compensation provide the highest measurement accuracy. Low maintenance requirements and the long sensor life reduce your cost of ownership.

Features

• Reading of gas concentration at transmitter display
• Ex-proof visual and audible alarms
• ATEX certificate II 1 G EEx ia IIC T4 / II 2 G EEx em [ib] IIC T4
• One-person calibration at transmitter using touch keys or remote control
• Plug-in smart sensor sensor replacement without opening the casing

Advantages

• Concentration display at transmitter or at remote control
• ATEX II 1 G EEx ia IIC T4 / II 2 G EEx dem [ib] IIC T4
• Ex-proof visual and audible alarms
• No need for expensive Ex-proof buzzer or wiring
• Easy sensor replacement by means of plug-in smart sensors
• Long sensor life
• Low service requirement
• Permanent status and function display at transmitter
• Adjustments without opening the casing using touch keys or remote control; easy handling even for hardto-reach transmitter positions

73-0610RK RX-515 Multigas IR Monitor, 0 - 100% LEL/0 - 100% Vol CH4/0 - 25% O2/0 - 1000 PPM CO/0 - 20% CO2 by RKI Instruments

The LNG Carrier model is a combination type portable CH4, O2, CO and CO2 gas detector with an Infrared (NDIR) type sensor, galvanic cell type sensor and Electro-chemical cell type sensor. These sensors provide accurate detection of CH4, O2, CO and CO2 levels even in N2 and other inert environemnts. The measuring ranges are 0-100%LEL / 0-100%vol for CH4, 0-25%vol for O2, 0-1000ppm for CO and 0-20.0%vol for CO2 respectively. The RX-515 has an explosion proof and Intrinsically Safe design so that it can be used safely in any environment.

Features

• Dual range detection of CH4 or HC in %vol and %LEL.
• Unique gas combinations include : CH4/O2/CO/CO2 HC/O2/H2S
• Accurately measure CH4 or HC from inerted tanks with infrared sensor.
• High range H2S 0 - 1,000ppm available (RX-517).
• Intrinsically safe design.
• Datalogging (Max 30hours of interval trend).

Application

• LNG Carrier Storage Vessel gas monitoring

*Please note we can only ship RKI products to customers within the United States

48027 Shipsurveyor 7 Portable Gas Detector c/w Carrying Case and Accessories - O2 / CO2 by GMI

With 8 models to choose from, this extremely versatile instrument complies with international marine regulations for Confined Space Monitoring, Inerting, Pre-entry Testing, Tank Cleaning and many other marine applications in vessels such as LNG / LPG Tankers, Oil Tankers, Fruit Carriers and Refrigerated Cargoes.

Features

• Fully certified to MED.
• Simple user interface.
• Infrared (IR) technology for inerting / purging operations.
• Ability to enter up to 300 unique user identified location areas.
• Integral pump capable of drawing a sample from 30 metres.
• Dual mode operation: Confined Space Monitor (CSM) or Combustible Gas Indicator (CGI).
• Rugged impact resistant carbon impregnated casing.
• LCD with automatic backlighting.
• Complete with Data Downloading and flexiCal Plus (Calibration) software.

Includes

• Hard Carrying Case
• User Handbook
• Probe Handle with Dust and Water Filters
• 1m Conductive Tubing with Quick Connect
• 15cm Probe
• Neck/Shoulder and Waist Harness
• Hex Driver
• 10 x Dust Filters
• Quick Op Guide
• Calibration Certificate
• Configuration Report
• Data Downloading
• Software CD & Calibration Software (Flexical)