$200 - $300

Part Number: 58L-406

Part Number: F105325PM66

Part Number: 58L-448

WD-17006-05 InnoCal NIST-Traceable Calibration; 5 to 9 Points, Liquid-in-Glass Thermometer by Oakton

Glass thermometers are one of the most common types of temperature instruments and are available in a variety of styles, sizes, and versions. Their unique characteristics of wide range, precision, repeatability, and quick response create a unique challenge for the metrologist who is calibrating these instruments. InnoCal can calibrate spirit-in-glass (SIG) thermometers. Calibrations for glass thermometers use direct comparison in high-stability liquid baths using Precision Reference Thermometers (PRTs) and Standard Platinum Resistance Thermometers (SPRTs) and high precision displays. The glass thermometers are inspected for cracks and liquid-column separations before testing.

• InnoCal is the only authorized service center for ERTCO brand liquid-in-glass (LIG) thermometers in the United States
• We also calibrate any make and model of LIG thermometers including Brooklyn Thermometer, Miller and Weber, Inc., LSW, and H-B Instruments
• Testing range for liquid-in-glass thermometers is from -80 to 420°C (-176 to 788°F)
• Calibrated at manufacturer's recommended points or at your desired points depending on your specific requirements. Correction factors are also provided for your convenience.

To meet your calibration needs:

• All calibration certificates contain as-found and as-left data, estimated measurement uncertainties (emu's), and test uncertainty ratios (TUR's) at no additional cost!
• This NIST-traceable calibration allows you to confirm that the specific asset you purchase meets the manufacturer's published specification
• EPA, USDA, ISO, and GLP/GMPs standards require regular NIST-Traceable calibration of all test equipment being used in critical applications
• Receive your product calibrated and ready to use rather than sending it to a third-party or internal calibration lab and incurring additional delays

All measurements reported are traceable to SI units via national standards maintained by NIST and performed in compliance with ANSI Z540, ISO17025, and MIL-STD-45662A. FDA Compliant.

InnoCal is accredited to ISO/IEC 17025 by the American Association for Laboratory Accreditation (A2LA) under certificate number 1746.01. This accreditation is your assurance that the calibration is performed in a qualified, controlled laboratory.

Calibrations on glass thermometers are performed using direct comparison in high-stability liquid baths using high-precision PRT's and SPRT's and displays. Thermometers are inspected for cracks and liquid-column separations before testing. Measurements are performed at 5 to 9 points between -197°C and 550°C.

Points are generally selected at the manufacturer's specified points but customer-specified points can be accommodated. For certificates with more calibrations points, see 17006-06 for 10 to 15 points.

Part Number: 58L-411

Part Number: C2HOSE450

*Please note we can only ship RKI products to customers within the United States

Part Number: F105325PM79

0560 3161 316i Gas Leak Detector with Flexible Probe by Testo

Ideal if you wish to rule out or locate leaks in gas fittings – equipped with simple traffic light LED on the head and self-explanatory bar scale. In addition, ppm values and even %LEL (lower explosive limit) can be called up and documented via the app.

With the testo 316i gas leak detector, you can locate leaks easily and precisely. The acoustic and visual alarm via the multicolor LED on the sensor head and the self-explanatory bar scale ensure simple leak detection.

• Multi-colour LED (visual and acoustic alarm
• Sensor self-test and automatic zeroing
• Flexible measuring probe for locations that are difficult to access
• Connection to testo Smart App for documentation and ppm display
• Battery-powered

Part Number: 44L-490T

Part Number: CGQ5813

WD-35634-66 pHTestr® 5 Waterproof Pocket Tester with pH Buffer Pouches by Oakton

These pocket-sized testers have a replaceable single-junction sensor which can be easily switched out, allowing you to save money by using the tester body over and over again. A large LCD makes viewing measurements easy and features a three-color backlight indicating operational mode - blue for measurement, green for calibration and red for alarm condition.

Additional features include hold function to lock in measurements, self-diagnostic error message, and status icons for measurement stability and low battery voltage. The IP67-rated housing features an easy-to-grip design and floats if accidentally dropped in water when sensor cap is on. Powered by four AAA batteries, the testers can operate up to 400 hours continuously. To conserve power, the unit will auto power-off after 8 minutes of nonuse.

Buffers are traceable and offer ±0.01 accuracy at 77°F (25°C).

Key Features

• Large easy-to-read LCD features three-color backlight
• Simple to calibrate with automatic standard recognition
• Rugged IP67-rated housing is waterproof, dustproof, and floats in water with sensor cap on
• Leakproof cap with fill line functions as a sample/calibration and hydrating cup
• Secure - attach a lanyard to prevent losing or dropping in the field
• Auto shutoff extends battery life
• Bundled kit for convenience and savings!
• Economical pH buffer pouches are accurate and convenient

Includes

Pack of 20 assorted (4, 7, and 10) buffer pouches, plastic storage case, lanyard, and four AAA batteries.

Part Number: 58L-469

WD-35807-05 Semi-Domed, Double-junction pH Electrode (Use with pH 100, 200, 800, and 1000 controllers) by Oakton

A. In-line submersible electrodes feature a probe guard to protect sensor from damage. They can be placed in a tee fitting for in-line use. CPVC body with 3/4" NPT thread on both ends withstands temperatures up to 80°C.

B. Submersible electrodes are permanently encapsulated in a 3-ft pipe - perfect for tank installation. ABS plastic body withstands temperatures up to 80°C.

C. Semi-domed bulb electrodes with solution ground have a unique surface design that protects electrode from particulates and increases flow across the junction to keep the bulb clean. Graphite body acts as a solution ground. Withstand temperatures up to 100°C.

D. Self-cleaning flat electrodes have an innovative flat surface that prevents solids buildup. CPVC body with 3/4" NPT thread on both ends withstands temperatures up to 80°C.

E. PTFE junction electrodes are excellent for simple wastewater applications. PTFE junction and polymer gel reference electrolyte resist clogging. CPVC body with 3/4" NPT thread on both ends withstands temperatures up to 80°C.

F. PTFE junction electrodes with solution ground are excellent for tough wastewater applications. Solution ground pin eliminates ground loop and electrical noise problems. PTFE junction and polymer gel reference electrolyte resist clogging. Ryton body with 3/4" NPT thread on both ends withstands temperatures up to 100°C.

• Include BNC connector
• Built-in Pt RTD sensor with stripped ends for temperature (ATC) element
• ORP electrodes feature Pt band sensor
• Use electrodes with solution ground with our pH 200, 800, or 1000 controllers in areas with high electrical noise

Old Part Number: F105325MX48
New Part Number: F105325PM48

TPI-1200 BNC Attenuator Kit by Test Products International

Includes

• 805-53-000 BNC Shunt
• 120082 Individual BNC Attenuator, 3 dB 1.0 Watt
• 120083 Individual BNC Attenuator, 6 dB 1.0 Watt
• 120085 Individual BNC Attenuator, 20 dB 0.5 Watt
• 105-52-000 BNC Termination

610-1085-000 Single-Gas Calibration (Benzene, 5 PPM, Balance Air), 34 Liters by RAE Systems

Green cylinder technology not only saves the environment, it also saves time and money.

• Gas cylinder size options 34, 58 and 116 liter
• Green Refillable cylinder
• "Strip and Ship" program for easy return of empty cylinders
• Small cylinder footprint
• Cylinder technology offers exceptional gas stability
• All gas cylinders use the same valve