$200 - $300

3500-41541003 OEM - 3500 LED Blast/Helmet Light 100' Power Cord w/ small plug on one end by Western Technology

The 3500 LED - FIELD REPAIRABLE BLAST LIGHT is the best solution for abrasive blast lighting that gives the user the flexibility to do on the job field repairs. With the number of available and replaceable parts and accessories, this LED light will help reduce down time and get you back on the job. It is a must have tool for your abrasive blast lighting needs.

Features

• Light Output: 295 Lumens
• Brightness @ 48": 3110 Lux @ 8.5" Diameter
• Emitter Type: LED
• Color Temperature: +5500K
• Power Consumption: ~4 Watts
• Voltage Range: 12-30 VDC
• Light Body: Cast Aluminum
• Length: 4 3/8"
• Width: 2 5/8"
• Diameter: 2 5/8"
• Weight: 20 oz.
• Field Repairable Parts & Accessories (See Accessories)
• Battery Pack & Accessories (See Model 3510 LED)

Part Number: 34L-449

WD-35805-14 Platinum Band Sensor, Submersible, Single-junction, Epoxy-body, Gel-filled ORP Electrode (Use with all OAKTON pH meters except pH Wand and pH/CON 10) by Oakton

Use with any meter with a BNC connector

Choose a single junction electrode for field, clean water, and general purpose applications. Choose a double junction electrode for most applications, including dirty water, heavy metals and organics applications.

All electrodes have a BNC connector, and are 12 mm dia with a 3 ft cable (except submersible electrode, which is 25 mm dia with a 10 ft cable). We offer many other pH and ORP electrodes for specialty applications.

• Each 12 mm electrode includes a FREE electrode saver bottle to extend electrode life
• Use ORP electrodes with meters that read mV to take REDOX readings

A740 Infrared Printer by Test Products International

Use the A740 with select TPI instruments to print hard paper copies of your measurement data.

• Power On indication (red LED)
• Adjustable contrast (low, norm, high)
• Manual paper feed (advance)
• Operates on 4 "AA" batteries or optional AC adapter
• Self test at Power On
• 3-Year Warranty

Part Number: F105325PM59

Part Number: 34L-409

93830-72 Universal Industrial Thermocouple Probes Type J 6" Length by Digi-Sense

The Uniwell eliminates the need for thermowells and spring loaded probes. With a unique adjustable feature that allows the probe to be customized to the required insertion length, through the use of an adjustable 1/2" NPT compression fitting. Also designed to be directly inserted into the medium being measured without the use of a thermowell. This allows for ease of installation where a thermowell is not required. The probes conductor is made of 14 gauge wire and is encased with Magnesium Oxide insulation, and has a 446 stainless steel heavy wall sheath producing an increased life span. Featuring a standard size aluminum protection head with a gasketed cap to seal out dust and moisture and houses a ceramic terminal block.

Part Number: M19781000PA

37804-05 Traceable® High-Accuracy RTD Digital Thermometer with Calibration; Bullet Probe by Digi-Sense

Easily monitor temperature in liquids, baths, air/gas, incubators, refrigerators, or freezers. Keep track of temperature conditions overnight or for any time period-minimum and maximum temperatures are stored until the memory is cleared. The 4-wire platinum probe insures linear response and high accuracy across the entire range.

The built-in alarm provides an alert when temperature rises above or falls below a user defined set point, and is programmable in 1° increments. A visual and audible signal continues even if the temperature returns to non-alarm range until reset by the user.

Probe is attached to a 10-ft (3 m) micro-cable that permits a doors to close on it; probe and cable are both submersible. Mount meter with included Velcro® strips, wall-mount slots, or use flip-open stand on benchtop.

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

Model 37804-05 has a wire probes with staunless steel bullet sytle end and is designed for general-purpose applications.

• Get accurate, reliable measurements with included NIST-traceable calibration
• Temperature-buffered platinum RTD probe
• RTD probe insures linear response and high accuracy across the entire range
• Triple-display-shows high, low, and current temperature simultaneously

Includes

NIST-traceable calibration certificate with data, plastic stand, double back tape and Velcro® for attaching holder to any surface, stainless-steel probe(s), and two AA batteries

Part Number: 34L-420

CONEXTEND2 Connect Range Extender 2 by Bluelab

Product Features / Benefits

• Increases Connect wireless range by a further 100 metres/330 feet (typically indoors)
• Link multiple Range Extenders for extra-long range (up to 700 metres/2300 feet)
• Water resistant for peace of mind
• International power supply included for easy use anywhere
• Easy access to Bluelab Connect software

Part Number: 1991-0159

Part Number: M1016200PM4

*Please note we can only ship RKI products to customers within the United States

Part Number: 34L-14-25

WD-35805-18 Spear Tip, Double-junction, Glass-body, Refillable pH Electrode (Use with all OAKTON pH meters except pH Wand and pH/CON 10) by Oakton

Use with any meter with a BNC connector

Choose a single junction electrode for field, clean water, and general purpose applications. Choose a double junction electrode for most applications, including dirty water, heavy metals and organics applications.

All electrodes have a BNC connector, and are 12 mm dia with a 3 ft cable (except submersible electrode, which is 25 mm dia with a 10 ft cable). We offer many other pH and ORP electrodes for specialty applications.

• Each 12 mm electrode includes a FREE electrode saver bottle to extend electrode life
• Use ORP electrodes with meters that read mV to take REDOX readings

Old Part Number: Z107925MX1
New Part Number: Z107925PM1

Part Number: 34L-443