$200 - $300

Part Number: 44L-415

90447-19 RTD Probe 1/8" OD 11" Length Miniature Jack by Digi-Sense

Resistance Temperature Detectors, or RTDs, are used in many process and laboratory applications where accuracy and repeatability are of prime importance. RTD elements are available in many different materials and with different temperature coefficients. The most commonly used element is a wire-wound platinum element, conforming to the DIN standard and with a .00385 temperature coefficient.

Key Features

• All probes are low range
• 316 stainless steel sheath material
• Extension leadwire transition with relief spring (350,°F)
• 3-wire RTD, 100 Ω
• Accuracy ±0.1%
• -328 to 400°F (-200 to 204°C)
• .00385°C temperature coefficient
• Constructed using PTFE Insulated silver plated copper internal leads

*Please note we can only ship RKI products to customers within the United States

WD-59002-75 "All-in-one" pH Probe with ATC for 300/310 Series Meters by Oakton

Replace electrodes when they break, no longer hold calibration, cannot be rehydrated, or are not compatible with your sample.

Measuring Range: -50 to +400 °C

CS8000TC-K=1/P1K Conductivity Sensor, K=1, P1K, 8-Pin Din Top Cap by Sensorex

Ideal for continuous monitoring in boiler, cooling tower, and other process applications, the CS8000 is a convenient and reliable conductivity monitoring probe.

The probe installs in seconds, with a keyed flange to ensure proper sensor orientation. Cleaning, calibrating, and replacing sensors has never been easier. The S855 cable assembly detaches from the sensor body in seconds with no tools required, just hand loosen the knurled nut and remove the sensor. Flush mount graphite measuring suface is easily cleaned with detergent and a soft bristled brush.

Temperature compensation is included with a choice of sensor types (10K NTC, 30K NTC, Pt 1000RTD & Pt100 RTD) to match the requirements of your conductivity transmitter or controller. Compatible with Sensorex controllers and transmitters as well as those from other manufacturers.

Order the CS8000TC by itself, or in a pre-configured kit that includes the cable assembly and flow cell.

Features:

• Installs in seconds with no tools necessary
• Quick disconnect cable enables easy sensor maintenance
• Flat measurement surface resists coating
• Built in automatic temperature compensation Compatible with a wide range of transmitters and controllers

FLT007 Heavy Duty Float Switch with 1' NPT Mount and 1/2' NPT Conduit by Chicago Sensor

• Rugged, heavy duty switch.
• 304 Stainless steel.
• Horizontal mount suitable for mounting through the side of a chamber
• UL Recognized part.
• Normally closed; mount inverted for normally open operation.
• 1" NPT (1-11.5) tapered stem threading; self-sealing; does not come with a nut.
• Warranted against manufacturer defect for one year from delivery date.

*Please note we can only ship RKI products to customers within the United States

Ethernet Port by Agrowtek

An Ethernet port is optional providing the capability to connect the controller directly to an Ethernet network for access and control via remote internet connections. A serial port is included on all systems for direction connection to a PC.

90131-04 Solar-Powered Adjustable-Angle Celsius Thermometer; 4" L by Digi-Sense

View readings from almost any angle by simply adjusting the angle of the head. Three-inch diameter adjustable head has an easy-to-read LCD. Requiring no batteries these thermometers are ideal in pilot plant or research and development applications where exact readings are required. The safety circuit prevents false readings. Each thermometer is housed in a weather-resistant 304 stainless steel (SS) case. Stem is 304 SS. An acrylic lens protects the face. To further protect thermometer order a thermowell from page 1052. Simply match the stem length to the probe depth "A" for the thermowell.

94460-46 Traceable Memory-Loc™ Datalogging Thermometer with Calibration; 2 Stainless Steel Probes by Digi-Sense

Easily monitor temperatures overnight or for any time period - stores over 1 million temperature observations. Datalogger will stop recording when storage is full and will not overwrite recorded data. Memory can be cleared after downloading data and alarm events. Set high and low alarms in 1° increments; alarm sounds when temperature rises above or falls below set points. The alarm tracking feature stores data for up to 10 different alarm events detailing when the alarm state occurred, as well as when the unit returned within range. Alarm state indicator include audio alerts and flashing LCD segments. Transfer data recorded in a CSV format to any computer via a USB flash drive - no software is required. Unit continues to record data while downloading data. Sampling rate is 5 sec (10 sec for models 98768-55, -56, -59, and -60). Select logging interval ranging from 1 min to 24 hours. Other status indicators include low-battery, memory full, USB data transfer, and active alarm state. Probe is attached to a 10-ft (3 m) microcable that permits a door to close on it. Mount meter with included hook-and-loop strips, wall-mount slots, or use flip-open stand on benchtop.

Select from glycol-filled glass, or vaccine bottle probe(s), standard plastic Bullet™ probe(s), or stainless steel probe(s). Bottle probes contain nontoxic glycol solution which is considered GRAS (generally recognized as safe) by the FDA. The solution filled bottle simulates the temperature of other stored liquids and eliminates the rapid temperature fluctuation caused by opening the refrigerator/freezer door. Vaccine bottles are designed to fit vaccine trays. Use standard Bullet probe to measure air and liquid temperatures. Bullet probe sensor and cable may be completely immersed; sensor measures 3/4"L x 0.187" dia (19 x 4.75 mm). Durable stainless steel probes measure 6-1/4"L x 0.125" dia (159 x 3.18 mm) and withstand both low and high temperatures - ideal for measuring temperatures of air, liquids, and semi-solids.

Traceable® Products have an individually-numbered Traceable® Certificate provided with each unit, that assures accuracy from our ISO/IEC 17025:2017(1750.01) calibration laboratory accredited by A2LA. It indicates traceability of measurements to the SI units through NIST or other recognized national measurement institutes (NMI) that are signatories to the CIPM Mutual Recognition Agreement. Each product goes through an intense vetting process before it can carry the Traceable name, thus saving you both time and money by not having to calibrate separately.

Thermometer features 2 stainless steel probes.

Key Features

• Store up to 10 unique alarm events, memory can be cleared after downloading data
• Smart-Alarm™ with visual/audible alarm continues to alert even if the unit returns to nonalarm conditions
• Triple-display - shows high, low, and current temperature simultaneously
• Includes NIST-Traceable certificate from our A2LA accredited (1750.01) calibration laboratory
• Thermometer logs 2 years of observations with a 1 minute logging interval. Device will stop recording when storage is full and will not overwrite recorded data. Data is unable to be deleted from memory once stored. Meter will store 1 million temperature observations

Includes

NIST-Traceable calibration certificate with data, stainless steel probes with 5-ft cable, magnetic strips, hook-and-loop strips, flip-open stand, and batteries.

Old Part Number: F105325MX45
New Part Number: F105325PM45