$100 - $150

Part Number: M5IRBAT04B

WD-00652-48 Traceable® Conductivity and TDS Standard, Individually-Tested, 1000 μS; 500 mL by Oakton

• Oakton® Traceable® conductivity and TDS standards have detailed labels: KCl, NaCl, and 442 conversions, temperature corrections, and certified values referenced to 25°C-convenient!!
• Average accuracy at 25°C is ±0.25 microsiemens for 1, 5, 10 microsiemen (μS) solutions, or ±0.25% for all other solutions. The tested uncertainty is shown on the certificate, whichever is greater
• Conductivity options range from 1 to 200,000 μS/cm
• Individually-tested solutions are certified by the bottle - each bottle is analyzed for the best accuracy

METHODS SUPPORTED

Certified reference material meets test requirements for Federal, State, and local agencies, CAP, ASTM, NCCLS, CLSI, ACS, CLIA, AOAC, EPA, APHA, AWWA, WEF, USGS, USP, and ISO. Traceable® Conductivity Standards complies with and is essential for use in these official methods: AOAC 973.40, EPA 120.1, Standard Method 2510 (APHA, AWWA, WEF), ISO 7888, DIN 38404, ASTM D1125, USGS I-1780, USP 645, and for A2LA/NVLAP accreditations/ISO 9000 certifications. Material may be used to calibrate all conductivity meters and to determine all conductivity cell constants.

A2LA ACCREDITATION ISO/IEC 17025:2005 (1750.01)

To assure accuracy an individually serial-numbered Traceable® Certificate is supplied to indicate traceability to standards provided by NIST (National Institute of Standards and Technology) and/or a National Standards Laboratory. A2LA accredited certification provides the highest achievable level of quality assurance, documentation, and accuracy. Conductivity Standards are produced in an A2LA accredited ISO/IEC 17025:2005 (1750.01) calibration laboratory. Additional certifications include ISO 31 (certificate content) and ISO 35 (statistical analysis), plus ISO 9001 (certified quality manufacturer).

• All Oakton® Traceable® conductivity standards are NIST-traceable reference materials
• Supplied with a calibration report from an ISO 17034 and ISO 17025 accredited laboratory
• These standard solutions let you calibrate conductivity instruments to ensure accuracy
• If unopened, shelf life is one year; once opened, shelf life will vary by solution value
• Use when readings are expected to be around 1000 μS/cm

INCLUDES

temperature compensation chart, TDS conversion chart, and NIST-traceable calibration certificate with data.

7701HDNS Intrinsically Safe Low-Profile Dual-Light Headlamp (Hard Hat Strap) by Western Technology

The 7701 HD Intrinsically Safe LED Headlamp is an intrinsically safe and safe for use in hazardous environments (industrial, utility, oil, gas, mining, etc). Now the 7701 HD Intrinsically Safe LED Headlamp is now brighter than ever with 120 lumens and a measured beam range of 541 feet. The 7701 HD LED headlamp is made of impact resistant resin offering exceptional durability and weather resistance. All openings are O-ring sealed. This headlamp runs for 11 hours on three (3) AA alkaline batteries. The 7701 HD Intrinsically Safe LED Headlamp includes both adjustable cloth headstrap and rubber hard hat strap.

Features

• Safety Rating: Class I, Div 1, Groups A, B, C, D;
• Safety Rating: Class II, Div 1, Groups E, F, G;
• Safety Rating: Class III, Temp Code: T4
• LED Emitter: C4® LED, impervious to shock (50K hour lifetime)
• Light Output: 120 Lumens, 11 hour runtime, 165m beam
• Powered by: (3) AA alkaline batteries (included)
• Light Body: Engineered resign case. All openings are O-ring sealed.
• Light Body Dimensions: 2.0" W x 3.08" L x 2.5" D
• Light Head Diameter: 1.88"
• Net Weight: 7.1oz w/ batteries & head strap
• Headband: (1) Elastic head strap & (1) Rubber hard hat strap [included]
• Lens: Unbreakable polycarbonate
• Parabolic reflector: Long range brilliance & smooth uniform beam pattern
• Switch: Push-button on/off - easy to use even when wearing heavy gloves
• Impact Resistant: One meter impact-resistance tested
• 90 degree tilting head

MC410 TDS - PPM Monitor by Milwaukee

The MC Monitors are designed to continuously monitor pH, EC or TDS values directly in your reservoir. Each unit features a user selectable set-point. An LED visual alarm is activated and flashes when the pH, EC or TDS level rises either Above or Below (user selected) that set-point.

All these instruments run on a 12V adapter so there's no need to worry about failed batteries and each unit comes with mounting kit, probe, probe holder and starter calibration solution.

• User selectable Hi/Low Set Point
• Manual 1 points calibration
• Visual LED alarm
• Supplied with 12 VDC adapter, mounting kit, and 20ml 1382ppm calibration solution
• MA81/2 PPM Probe with 2m cable (BNC connector)

*Please note we can only ship RKI products to customers within the United States

WD-00652-56 Traceable® Conductivity and TDS Standard, Individually-Tested, 150,000 μS; 500 mL by Oakton

• Oakton® Traceable® conductivity and TDS standards have detailed labels: KCl, NaCl, and 442 conversions, temperature corrections, and certified values referenced to 25°C-convenient!!
• Average accuracy at 25°C is ±0.25 microsiemens for 1, 5, 10 microsiemen (μS) solutions, or ±0.25% for all other solutions. The tested uncertainty is shown on the certificate, whichever is greater
• Conductivity options range from 1 to 200,000 μS/cm
• Individually-tested solutions are certified by the bottle - each bottle is analyzed for the best accuracy

METHODS SUPPORTED

Certified reference material meets test requirements for Federal, State, and local agencies, CAP, ASTM, NCCLS, CLSI, ACS, CLIA, AOAC, EPA, APHA, AWWA, WEF, USGS, USP, and ISO. Traceable® Conductivity Standards complies with and is essential for use in these official methods: AOAC 973.40, EPA 120.1, Standard Method 2510 (APHA, AWWA, WEF), ISO 7888, DIN 38404, ASTM D1125, USGS I-1780, USP 645, and for A2LA/NVLAP accreditations/ISO 9000 certifications. Material may be used to calibrate all conductivity meters and to determine all conductivity cell constants.

A2LA ACCREDITATION ISO/IEC 17025:2005 (1750.01)

To assure accuracy an individually serial-numbered Traceable® Certificate is supplied to indicate traceability to standards provided by NIST (National Institute of Standards and Technology) and/or a National Standards Laboratory. A2LA accredited certification provides the highest achievable level of quality assurance, documentation, and accuracy. Conductivity Standards are produced in an A2LA accredited ISO/IEC 17025:2005 (1750.01) calibration laboratory. Additional certifications include ISO 31 (certificate content) and ISO 35 (statistical analysis), plus ISO 9001 (certified quality manufacturer).

• All Oakton® Traceable® conductivity standards are NIST-traceable reference materials
• Supplied with a calibration report from an ISO 17034 and ISO 17025 accredited laboratory
• These standard solutions let you calibrate conductivity instruments to ensure accuracy
• If unopened, shelf life is one year; once opened, shelf life will vary by solution value
• Use when readings are expected to be around 150,000 μS/cm

INCLUDES

temperature compensation chart, TDS conversion chart, and NIST-traceable calibration certificate with data.

383A Non-Contact Infrared Thermometer by Test Products International

Thoroughly testing and diagnosing high efficiency HVACR systems or large surface areas can be labor intensive and expensive. Using the appropriate non-contact thermometer can reduce man hours and help insure system performance more easily, accurately and affordably.

Measure Hard-to-reach, sensitive, or large moving target areas. Use the 380, 381, and 383 to measure surface temperature and watch the LCD immediately display accurate data without the use of a probe.

Features

• Easy to use single button operation
• 0.1 resolution for best reading (380/381)
• Last reading hold
• Soft holster pouch included
• 8:1 distance to spot ratio
• Large, easy to read display
• °C and °F selectable
• 9V battery included

Application

• Vent air and return temperature measurements
• Tubing, piping and sheet metal temperature
• Leaks around cooler or freezer doors

HVAC/R

• Compressor heads
• Vents
Insulation
• leaks around cooler or freezer doors
• Steam traps
• Registers

Food

• Grill & surface temperatures
• Holding cabinets
• serving temperatures
• storage temperatures

Electrical

• Cables
• circuit breakers
• connections
• machinery
• motors
• transformers