Schaefer

545SC112G 54" Galvanized Slant Wall Exhaust Fan with Cone, 5-Wing Galvanized Blade, 1-1 / 2 Hp by Schaefer

Schaefer 54" galvanized cone fans with butterfly shutters offers high quality and at an economic price. The galvanized design protects against corrosion in hash agricultural applications and prolongs the life of the fan, greatly lowering the environmental and economic cost. The two-piece butterfly shutter keeps light out and improves performance.

Features and Benefits:

• G90 galvanized construction, for corrosion resistance
• Matched motors and blade combination for greater airflow and maximum efficiency
• Totally enclosed, thermally protected and maintenance free motor with completely sealed ball bearings motors for safety and long life
• Easy belt replacement, minimal maintenance required
• 3-wing or 5-wing blade style
• Two year warranty
• Made in the USA

57" Fiberglass Exhaust Fan with Cone, 3-Wing Cast Aluminum Blade, 2 Hp, High Efficiency

PS22 22" PVC Shutter by Schaefer

Schaefer PVC shutters are maintenance free, resistant to rust and corrosion and have an efficient, aerodynamic design. Louvers are curved for a tight seal when closed and corners are fused together for exceptional strength and durability. Optional integrated shutter motors available.

The 115 volt, 1/2 amp gear motor and arm assembly opens shutter when energized and closes shutter when de-energized. Nylon bearings will not corrode and never needs lubrication.

AM-DDISP500 Disposable Poly Ducting, 500' by Schaefer

Available in 500 foot rolls and can be cut to any length. Made of 4 mil disposable ducting. For use on the exhaust side of blower only.

5-Staged Environmental Control

WS-120E 22" Aluminum Shutter by Schaefer

12" Schaefer economy aluminum shutters allow airflow in a single direction and are used as building air inlets to feed Schaefer exhaust fans, or on exhaust fans to prevent air entry when the fan is not operating.

Aluminum shutters are built tough for long life in the most demanding environments, all at an affordable price.

Features

• Constructed of heavy-duty brushed aluminum for corrosion resistance and greater durability
• Interlocking louvers for maximum weather protection and lightweight for high efficiency and easy installation
• Tie bar to eliminate shutter flapping
• Shutter motor kits available for automated opening/closing

24CFO-SWDS-3 24" Washdown Duty Fan, Stainless Steel Motor, Stainless Steel OSHA Guards and Stainless Steel Blade, 3-Phase by Schaefer

Increase productivity and improve work area safety with high performance Schaefer washdown duty air circulators. Designed to withstand frequent washing and for long life in wet and moist environments these fans are ideal for food and beverage processing facilities, kitchens, hospitals and other clean, corrosive or humid environments.

Features and Benefits

• Choice of three sizes: 20", 24" and 30" diameter
• Corrosion resistant electro-polished 304 stainless steel, OSHA compliant guards
• Extremely high airflow compared to competitive offerings
• Pedestals and stainless steel wall mounts available

Blade Choices:

• Stainless Steel: Excellent corrosion resistance. Electro-polished surface for easy cleaning and minimal bacteria growth. Meets USDA, FDA and NSF/ANSI/3-A standards. Rigid enough to be pressure washed while operating.
• Polypropylene: A less expensive option. Excellent corrosion resistance. Excellent tolerance to a broad range of chemicals. Lighter weight. Should not be pressure washed while operating. The only blade choice for anodized aluminum motors.

Motor Choices:

• Stainless Steel: Best for frequent wash downs. IP55 enclosure protection. Meets USDA and NSF/ANSI/3-A standards. 1-phase and 3-phase. 3-phase is VFD compatible. 2-year warranty.
• Epoxy Coated: Very powerful motors. Best for occasional wash downs. USDA and FDA approved corrosion resistant white epoxy finish. IP55 enclosure protection. 1-phase and 3-phase. 1-year warranty.
• Anodized Aluminum: Best for high temperature applications. Only available with a polypropylene blade. IP55 enclosure protection. Class F insulation. Meets UL, CSA and CE standards. 1-phase is speed controllable. 3-phase is VFD compatible. 3-year warranty.

Condenser Filter

24" Versa-Kool Circulation Fan, High Efficiency

WS-570 57" Aluminum Shutter by Schaefer

Schaefer aluminum shutters allow airflow in a single direction and are used as building air inlets to feed Schaefer exhaust fans, or on exhaust fans to prevent air entry when the fan is not operating.

Aluminum shutters are built tough for long life in the most demanding environments, all at an affordable price.

Features and Benefits:

• Constructed of heavy-duty brushed aluminum for corrosion resistance and greater durability
• Interlocking louvers for maximum weather protection and lightweight for high efficiency and easy installation
• Tie bar to eliminate shutter flapping
• Shutter motor kits available for automated opening/closing

AM-DDISP1325-4P 13" x 25' Disposable Ducting, 4-Pack by Schaefer

Available in 500 foot rolls and can be cut to any length. Made of 4 mil disposable ducting. For use on the exhaust side of blower only.

Hose High Pressure 16"

AVS-650 Automatic Variable Speed Control w/Heater Interlock by Schaefer

Our broad range of sensors and manual/automatic controls allow dairymen, greenhouse operators, plant managers and others to control fans and heaters and optimize thermal comfort in their facilities.

WS-200 20" Aluminum Shutter by Schaefer

Schaefer aluminum shutters allow airflow in a single direction and are used as building air inlets to feed Schaefer exhaust fans, or on exhaust fans to prevent air entry when the fan is not operating.

Aluminum shutters are built tough for long life in the most demanding environments, all at an affordable price.

Features and Benefits:

• Constructed of heavy-duty brushed aluminum for corrosion resistance and greater durability
• Interlocking louvers for maximum weather protection and lightweight for high efficiency and easy installation
• Tie bar to eliminate shutter flapping
• Shutter motor kits available for automated opening/closing

1-Phase/Single-Speed Motor, 1/3 Hp, 115/230V, 60 Hz, 1725 rpm

485B1-2 48" Galvanized Exhaust Fan in Box Housing, 5-Wing, 1 Hp, Belt Drive, 2-Speed, 230 Volt Only by Schaefer

Maintain a safe and productive work environment by exchanging hot or contaminated air using Schaefer low cost galvanized, box exhaust fans. These low cost, high volume exhaust fans are protected from the elements with outlet side aluminum shutters and mount in walls of almost any thickness, typically with the outlet shutter flush, or nearly flush with the outside wall. Fans ship fully assembled with aluminum inlet shutters, self-adjusting belt tensioner and galvanized outlet guard.

Features and Benefits:

• G90 galvanized construction, for corrosion resistance and long life
• Totally enclosed, thermally protected motors for safety and long life
• Easy belt replacement, minimal maintenance required
• Remote Lubrication System optional
• Suitable for buildings with any wall thickness
• Available in 36" or 48" sizes
• 3-wing or 5-wing blade style
• Two year warranty
• Made in the USA

543GP1 54" Galvanized Panel Fan, 3-Wing, 1 Hp by Schaefer

Schaefer's galvanized steel panel fans combine low cost, high airflow and high air speeds for very high ROI livestock cooling. These fans are designed for agricultural livestock buildings requiring large volumes and velocities of air with a belt driven preference. Regardless of application, free stall barns, feed lines or holding pens, Schaefer offers a wide variety of galvanized panel fans to meet your specific needs. Ships fully assembled, complete with belt tensioner.

Features and Benefits

• Industry leading airflow and efficiency with airflows up to 40,000 cfm and efficiencies up to 40 cfm/watt
• Lab tested design for maximum performance and quiet operation
• Heavy gauge galvanized and powder coated steel components
• Thermally protected TEAO motors for long life
• Optional post and column mounts available
• Available in 24", 36", 48", 52" and 54" sizes
• 3-wing or 5-wing blade style
• Two year warranty
• Made in the USA

WS-270E 27" Aluminum Shutter by Schaefer

27" Schaefer economy aluminum shutters allow airflow in a single direction and are used as building air inlets to feed Schaefer exhaust fans, or on exhaust fans to prevent air entry when the fan is not operating.

Aluminum shutters are built tough for long life in the most demanding environments, all at an affordable price.

Features

• Constructed of heavy-duty brushed aluminum for corrosion resistance and greater durability
• Interlocking louvers for maximum weather protection and lightweight for high efficiency and easy installation
• Tie bar to eliminate shutter flapping
• Shutter motor kits available for automated opening/closing

VKT36 36" Versa-Kool Mobile Tiltable Fan by Schaefer

Tired of continually replacing your mobile drum fans? Schaefer mobile drum fans have "Schaefer-Tough" polyethylene housing and durable reinforced galvanized steel wheel carriage for impact and rust resistance. These fans are built to last, the best looking fans in the industry and move massive amounts of air at high velocities. A single "Schaefer-Tough" mobile fan will not only take the place of several lower performance fans, but out live them as well, lasting for 10+ years.

Features and Benefits:

• Non-OSHA deep guards
• Incredibly quiet for its size and performance levels
• Extremely high airflow and air throw, rated up to 18,000 cfm
• Single and two-speed models available
• UL approved power cord included
• Optional stacking tabs available
• Two year warranty
• Made in the USA

In addition, VKM models feature:

• Large rubber wheels mounted inside the fan profile for convenience and safety
• Galvanized steel base for complete corrosion resistance inside and out
• Narrow fan profile, and ergonomic pull and base handles for easy portability
• Stacking capability up to four fans high

MKLP30-5B Low Pressure Mist Kit for 30" Fans; 5 x 0.012" Nozzles, Black by Schaefer

Instantly convert your circulation fan into a misting fan with Schaefer low pressure misting kits. The misting kits can reduce air temperature up to 30°F with wind from a fan and standard water pressure from an ordinary garden hose. The kits are easy to use with push releasable connections and optional ball valve water shut offs. Available for fans of all sizes, Schaefer mist kits provide an easy economical solution for your evaporative cooling needs.

Features and Benefits:

• 1/4" black polyethylene tubing for durability and resistance to cracking
• Brass and stainless steel nozzles to atomize the water
• Push releasable nozzles and fittings for easy cleaning
• Optional ball valve for quick and easy shutoff of water supply
• Standard garden hose connection for water pressure, no additional power required
• Minimal water consumption, as low as 1.7 gallons per hour, for energy efficiency and low environmental impact.
• 8 foot water supply line connection from ring to base
• Two year warranty
• Made in the USA

36DF 36" Direct Flow Circulation Fan, Mount by Schaefer

Direct flow circulation fans feature very high airflow with a narrow airflow pattern to deliver high volumes of fast moving air to cool cows and other animals. Ships fully assembled, available unassembled for high packing density and low shipping cost.

Features and Benefits

• Powerful 1/2 hp motor provides high airflow with a narrow airflow pattern for very high air speeds and effective cooling
• Thermally protected TEAO motors with matching blades for high performance and long life
• Safety spaced steel guards dipped in zinc and powder coated for superior corrosion resistance
• Easy open guards for cleaning and/or blade replacement
• 19" T-shaped, powder coated steel, fan mount included
• Single speed and direct drive
• Two year warranty
• Made in the USA

VK20-B 20" Versa-Kool Circulation Fan, Cord, Mount, Black by Schaefer

Reduce heat stress and improve air quality with Schaefer's uniquely designed circulation fans. Unrivaled in the market, these fans are engineered to produce greater air movement and superior cooling no matter the application. You don't hear them. You don't see them. You only feel them!

Also known as Horizontal Air Flow (HAF) fans, these fans move air in a coherent horizontal pattern creating a gentle 'racetrack' air flow pattern needed in greenhouses to maximize heat distribution and humidity control by mixing the air, from ceiling to floor.

Features and Benefits

• Deep guard design for unmatched performance, low noise levels and safety without sacrificing airflow
• Matched high quality motors and blades for maximum efficiency
• Powder coated steel guards for increased durability and corrosion resistance
• Hot dipped galvanized guards on VK12-GA and VK20-GA models for even greater rust protection
• Powder coated steel mounting bracket and power cord included
• Wide variety of mounting options available for flexible and easy installation
• Variable speed controls available
• Misting kits available for even greater cooling
• Two year warranty
• Made in the USA

545SC112G-3 54" Galvanized Slant Wall Exhaust Fan with Cone, 5-Wing Galvanized Blade, 1-1 / 2 Hp, 3-Phase by Schaefer

Schaefer 54" galvanized cone fans with butterfly shutters offers high quality and at an economic price. The galvanized design protects against corrosion in hash agricultural applications and prolongs the life of the fan, greatly lowering the environmental and economic cost. The two-piece butterfly shutter keeps light out and improves performance.

Features and Benefits:

• G90 galvanized construction, for corrosion resistance
• Matched motors and blade combination for greater airflow and maximum efficiency
• Totally enclosed, thermally protected and maintenance free motor with completely sealed ball bearings motors for safety and long life
• Easy belt replacement, minimal maintenance required
• 3-wing or 5-wing blade style
• Two year warranty
• Made in the USA

1-Phase/2-Speed Motor, 1/4 Hp, 115V, Oscillating, 1075/750 rpm