$100 - $150

*Please note we can only ship RKI products to customers within the United States

EC60 Premium EC/TDS/Salinity Pocket Tester by Apera

The Apera Instruments EC60 Pocket EC/TDS/Salinity Tester simply tests all kinds of regular EC measurements in an ACCURATE, QUICK, and RELIABLE manner. The applications include hydroponics, tap/drinking water, pools & spas, education, water treatment, environmental monitoring, etc. Up to 3 points of Auto Calibration with auto buffer recognition and 0 to 50°C Auto Temperature Compensation (ATC), 0.01 mS/±1% F.S, 0.5°C accuracy with measuring range of 0-200.0 μS/cm, 0-2000 μS/cm, 0-20.00 mS/cm, 0-50.0°C.

APERA's unique BPB (Brush-Resistant Platinum Black) sensor adopts a special processing technology, which minimizes electrode polarization, expands measuring range, and increases firmness of the electrode, hence ensuring a much higher accuracy and consistency in a wide-range conductivity measurement than traditional stainless steel electrodes, and is easy to clean. The probe is replaceable and easy to install so that you don't have to buy a whole new meter once the probe retires.

Auto recognition and indication of stable values improves consistency, saving you the trouble of guessing when to manually hold measurement. With an large clear 180° viewing angle screen with 2 backlit color (blue for measuring mode and green for calibration mode), it supports dual display of temp./EC value and indications of completed calibrations (where M/H indicate 2 points of calibrations) and stable readings (with a smiley face).

Easy menu setting, customizing your tester functions according to your needs (switch of temperature unit, TDS factor setting, Switch of salinity unit, auto hold on/off). Smart self-diagnosis, warning of out-of-range/preset measurement and incorrect calibrations.

Comes with a complete kit. IP67 waterproof and dustproof, floating on water. 1000 hours' continuous operation powered by AAA batteries (with low power warning and auto power off in 8 min if no operation).

Warranty: 2 years for the meter, 6 months for the probe.

• APERA's unique Replaceable BPB (Brush-resistant Platinum Black) probe ensures high accuracy and consistency in a wide-range conductivity measurement
• EASY Auto Calibration with auto buffer recognition; Auto Temp. Compensation (ATC) ensures accuracy in variant temperatures (0-50.0°C)
• LARGE CLEAR LCD with 2 backlit color (indicating 2 different modes), DUAL Display of temp./EC, and indications of completed calibrations and stable readings
• EASY Switch from EC to TDS/Salinity with customizable TDS factor (0.40-1.00)
• Complete kit with ready-to-use calibration solutions, calibration bottles, AAA batteries, and a lanyard all in a portable carrying case

Part Number: CG2K0.75103

PP1085-J Potassium Phosphate Dibasic, ACS (Dipotassium Hydrogen Phosphate), 100gm by AquaPhoenix

• CAS No. 7758-11-4
• K2HPO4 FW=174.18

Specifications

• Grade: ACS
• Packaging Type: Poly
• Size: 100 gram

Portable Storage Device for Supra Control Settings

WD-00652-22 Traceable® Conductivity and TDS Standard, Batch-Tested, 5 μS; 500 mL by Oakton

• Oakton® Traceable® conductivity and TDS standards have detailed labels: KCl, NaCl, and 442 conversions, temperature corrections, and certified values referenced to 25°C-convenient!!
• Average accuracy at 25°C is ±0.25 microsiemens for 1, 5, 10 microsiemen (μS) solutions, or ±0.25% for all other solutions. The tested uncertainty is shown on the certificate, whichever is greater
• Conductivity options range from 1 to 200,000 μS/cm
• Batch-tested solutions are lot certified; a few bottles from a single lot are analyzed

METHODS SUPPORTED

Certified reference material meets test requirements for Federal, State, and local agencies, CAP, ASTM, NCCLS, CLSI, ACS, CLIA, AOAC, EPA, APHA, AWWA, WEF, USGS, USP, and ISO. Traceable® Conductivity Standards complies with and is essential for use in these official methods: AOAC 973.40, EPA 120.1, Standard Method 2510 (APHA, AWWA, WEF), ISO 7888, DIN 38404, ASTM D1125, USGS I-1780, USP 645, and for A2LA/NVLAP accreditations/ISO 9000 certifications. Material may be used to calibrate all conductivity meters and to determine all conductivity cell constants.

A2LA ACCREDITATION ISO/IEC 17025:2005 (1750.01)

To assure accuracy an individually serial-numbered Traceable® Certificate is supplied to indicate traceability to standards provided by NIST (National Institute of Standards and Technology) and/or a National Standards Laboratory. A2LA accredited certification provides the highest achievable level of quality assurance, documentation, and accuracy. Conductivity Standards are produced in an A2LA accredited ISO/IEC 17025:2005 (1750.01) calibration laboratory. Additional certifications include ISO 31 (certificate content) and ISO 35 (statistical analysis), plus ISO 9001 (certified quality manufacturer).

• All Oakton® Traceable® conductivity standards are NIST-traceable reference materials
• Supplied with a calibration report from an ISO 17034 and ISO 17025 accredited laboratory
• These standard solutions let you calibrate conductivity instruments to ensure accuracy
• If unopened, shelf life is one year; once opened, shelf life will vary by solution value
• Use when readings are expected to be around 5 μS/cm

INCLUDES

temperature compensation chart, TDS conversion chart, and NIST-traceable calibration certificate with data.

08610-26 Traceable® Wall-Mount Digital Clock/Calendar/Thermometer with Calibration by Digi-Sense

Perpetual calendar shows month, date, day of week, and automatically adjusts for leap year. Selectable temperature display for °F or °C; shows room temperature to the nearest 0.5°. Attractive two-tone housing with built-in wall mount bracket.

Traceable® products are calibrated to NIST-traceable standards and ready to use as soon as you receive it. Each product goes through an intense vetting process before it can carry the Traceable name, and it includes NIST-traceable certification. This means that a 17025-accredited calibration test lab has confirmed that the product meets or exceeds all stated specifications, saving you both time and money by not having to calibrate separately.

NIST-traceable calibration also helps you meet quality standards and regulatory compliance for ISO, FDA, cGMP, VFC, CAP, CLIA and Joint Commission requirements.

Features:

• Get accurate, reliable measurements with included NIST-traceable calibration
• Quartz-crystal timing accuracy of 0.01%

Includes:

Two AAA batteries and NIST-traceable calibration certificate with data.

*Please note we can only ship RKI products to customers within the United States

*Please note we can only ship RKI products to customers within the United States