$100 - $150

765PTAC Thermocouple Panel Thermometer, Type PTA, Range -50.00 to 199.9 °C by Jenco

Panel mount digital thermometer with analog voltage output of 1 mV per digit, with analog output accuracy of ± 0.2%, features a bright red LED display and 1/8 DIN plastic housing. °C/°F selectable via plastic jumper behind front bezel. Available in types. J, K, T, E, and 3-wire Pt-100 RTD. Ambient range 0 to 60°C. 115/230V AC operation.

• High accuracy
• 50/60 hz rejection design
• Compact 1/8 DIN plastic case
• °C/°F selectable w/ re-calibration
• Models available for k,j,t,e pt-100
• Upscale break detection
• Cold junction consumption design
• 1mv/digit analog output
• Easy to install
• 0.56 high efficiency ide display

0613 5507 Clamp Temperature Probe Kit (fixed cable, NTC) - For measurements on pipes (Ø 6-35 mm) by Testo

Use the fixed cable clamp probe (NTC) to accurately measure surface temperatures on heating system pipes, water pipes, refrigeration systems or heat pumps (pipe diameter 6 to 35 mm). Depending on the connected measuring instrument, the robust clamp probe can be used to detect superheating/subcooling on refrigeration systems, but also to determine flow and return temperatures in heating technology, for example. The collet enables the surface probe to be attached quickly and easily.

WD-00652-54 Traceable® Conductivity and TDS Standard, Individually-Tested, 100,000 μS; 500 mL by Oakton

• Oakton® Traceable® conductivity and TDS standards have detailed labels: KCl, NaCl, and 442 conversions, temperature corrections, and certified values referenced to 25°C-convenient!!
• Average accuracy at 25°C is ±0.25 microsiemens for 1, 5, 10 microsiemen (μS) solutions, or ±0.25% for all other solutions. The tested uncertainty is shown on the certificate, whichever is greater
• Conductivity options range from 1 to 200,000 μS/cm
• Individually-tested solutions are certified by the bottle - each bottle is analyzed for the best accuracy

METHODS SUPPORTED

Certified reference material meets test requirements for Federal, State, and local agencies, CAP, ASTM, NCCLS, CLSI, ACS, CLIA, AOAC, EPA, APHA, AWWA, WEF, USGS, USP, and ISO. Traceable® Conductivity Standards complies with and is essential for use in these official methods: AOAC 973.40, EPA 120.1, Standard Method 2510 (APHA, AWWA, WEF), ISO 7888, DIN 38404, ASTM D1125, USGS I-1780, USP 645, and for A2LA/NVLAP accreditations/ISO 9000 certifications. Material may be used to calibrate all conductivity meters and to determine all conductivity cell constants.

A2LA ACCREDITATION ISO/IEC 17025:2005 (1750.01)

To assure accuracy an individually serial-numbered Traceable® Certificate is supplied to indicate traceability to standards provided by NIST (National Institute of Standards and Technology) and/or a National Standards Laboratory. A2LA accredited certification provides the highest achievable level of quality assurance, documentation, and accuracy. Conductivity Standards are produced in an A2LA accredited ISO/IEC 17025:2005 (1750.01) calibration laboratory. Additional certifications include ISO 31 (certificate content) and ISO 35 (statistical analysis), plus ISO 9001 (certified quality manufacturer).

• All Oakton® Traceable® conductivity standards are NIST-traceable reference materials
• Supplied with a calibration report from an ISO 17034 and ISO 17025 accredited laboratory
• These standard solutions let you calibrate conductivity instruments to ensure accuracy
• If unopened, shelf life is one year; once opened, shelf life will vary by solution value
• Use when readings are expected to be around 100,000 μS/cm

INCLUDES

temperature compensation chart, TDS conversion chart, and NIST-traceable calibration certificate with data.

*Please note we can only ship RKI products to customers within the United States

*Please note we can only ship RKI products to customers within the United States

0572 9001 Penetration Probe TC with Ribbon Cable, Type K, Cable Length 2 m, IP 54 by Testo

This thermocouple (TC) temperature probe with penetration tip can be used for measurements in pastes and semi-solid media and also for measurements in liquids and air.

The temperature probe features a thin, 2 m long ribbon cable. The thin ribbon cable can also be placed through narrow openings such as slits in doors or refrigerator seals.

Protection class IP 54 means that the temperature probe with penetration tip is protected against spray water.

This Type K, Class 1 thermocouple probe has a standardized accuracy of ±2.7 °F (±1.5 °C).

The temperature probe's response time t99 (time it takes for the probe to register 99% of the jump in temperature) of 7 seconds refers to measurements in moving water at 140 °F (+60 °C). This response time is extended when, for example, measurements are taken in still liquid, pastes or air.*

The perfect probe for any application

Don't see the temperature probe you are looking for? Please contact us directly. We have a large range of standard temperature probes and we also manufacture customized probes specifically according to your personal requirements.

* For air temperature measurements, the response time is about 40 - 60 times higher than the indicated value measured in water. If you should require a rather sluggish temperature probe to measure air temperature, this probe is particularly suitable because it does not take brief temperature peaks into account at all, or only to a very small degree, when measuring temperature. For example, if you are planning to use the temperature probe with penetration tip to measure air temperature in the refrigerator, briefly opening the refrigerator door would not take into account the temperature fluctuation which results from mixing the warm room temperature with the refrigerator temperature.

If you need an air temperature probe with a fast response time, your best choice would be the exceptionally fast temperature probe 0602 0493 which has a large measuring range.

• TC Type K temperature probe with exceptionally flat cable, which can be pushed through narrow openings, e.g. through slits in doors
• Temperature measurement in pastes and semi-solid media and also in liquids and air
• Measuring range: -40 to 428 °F (-40 to +220 °C)

Includes:

1 x TC Type K temperature probe with penetration tip 0572 9001, can be connected to the testo Saveris 2-T3 Wi-Fi data logger

ORP60 Premium ORP Pocket Tester by Apera

The Apera Instruments ORP60 tester is simply the best pocket ORP tester you can get in the market for all kinds of regular ORP testing. The platinum ORP probe is replaceable and easy to install, so you don t have to buy a whole new meter once the probe retires.

Auto Calibration with buffer recognition and 0 to 50°C Auto Temperature Compensation (ATC), 1 mV/±0.2% F.S, 0.5°C accuracy with -1000 to 1000 mV measuring range, auto recognition and indication of stable values (optional auto hold function available) improves consistency, saving you the trouble of guessing when to manually hold measurement (with optional auto hold function). A Large clear 180° viewing angle screen with 3 backlit color (blue for measuring mode, green for calibration mode, red for warnings), it supports dual display of temp./pH value and stable readings (with a smiley face).

Comes with a complete kit of premixed standard solution (222 mV), soaking solutions (KCL), AAA batteries, and a lanyard all in a portable carrying case. Easy menu setting, customizing your tester according to your needs. IP67 water-proof and dust-proof, floats on water so you don't have to worry if dropped in water by accident. Longest 2000 hours' continuous operation (without backlit) powered by 4 AAA batteries (with low power warning and auto power off in 8 min if no operation).

Warranty: 2 years for the ORP meter, 6 months for the ORP probe.

• Easy-to-install Replaceable FLAT sensor, Triple-Junction structure prevents clogging, designed for Skin, Fabrics, Paper, and other flat surface pH testing, also works great for micro-volume and regular liquid pH measurement
• Easy Auto Calibration with auto buffer recognition (1 to 3 points); Auto Temperature Compensation (ATC)
• Replaceable ORP Platinum Probe, easy to install so that you don t have to buy a whole new meter once the probe retires
• Auto recognition of stable values (optional auto hold function available) improves consistency so you don't have to guess when to manually hold measurement
• LARGE CLEAR LCD with 3 backlit color (indicating 3 different modes), dual display of temp./ORP, and indications of completed calibrations and stable readings
• COMPLETE KIT with ready-to-use calibration solutions, a calibration bottle, storage solutions, AAA batteries, and a lanyard all in a premium portable carrying case

H-10-105-10 Hydrogen Fluoride Colorimetric Gas Detection Tube, 0.5 - 20 ppmv (10 Tubes / Box) by RAE Systems

RAE Systems colorimetric gas detection tubes enable quick, on-the-spot measurement of a wide range of toxic and combustible gases and vapors. RAE Systems tubes are easy to read, and provide a sharp, clear color change directly corresponding to the concentration of gas present. RAE Systems tubes are compatible with the RAE Systems piston hand pump, a reliable way to draw samples of an exact volume required for the most accurate measurements.

Key Features

• Wide assortment of tubes available to detect over 300 gases and vapors
• Easyto use, even in multiple layers of gloves
• Easy-to-read with sharp,clearcolorchange
• No calibration or other maintenance required

Applications

• Oil and gas
• Chemicals and petrochemicals
• Agriculture and pestcontro
• Food and beverage production
• Environmental protection
• Fire service
• HazMat response
• Nationalsecurity

Old Part Number: 1016150
New Part Number: J1016150PA

*Please note we can only ship RKI products to customers within the United States

K-7511 Dissolved Oxygen Test Kit: CHEMetrics, 0-20 ppb by AquaPhoenix

Oxygen, dissolved — CHEMets® Visual Kit
Catalog No.: K-7511
Range: 0-20 ppb
MDL: 2 ppb
Method: Rhodazine D

Kit comes in a cardboard box and contains everything needed to perform 30 tests: Refill, Comparator, adhesive mounting clamp, permanent mounting clamp, sampling tube, and instructions.

Range: 0-20 ppb. MDL: 2 ppb. Method: Rhodazine D