$100 - $150

510 Solar Irradiance Meter by Test Products International

The TPI 510 is an easy to use, solar irradiance meter for measurement of not only solar radiation, but all measureable light sources including all visible light. The TPI Solar Meter is state of the art and easy to use. It is designed to measure solar power in W/m² or BTU (ft²*h).

Features

• Measure solar radiation (irradiance)
• Displays results in W/m² or BTU
• 0 to 1999 W/m2 (0 to 634 BTU) range
• Min / Max and Data hold functions
• Convenient, no need to adjust, data displayed clearly
• Measurable light sources, including all visible light
• Overload display "OL" when measurement is out of range
• Select either W/m² or BTU / (ft²*h) units

Applications

• Use to find the optimal angle of inclination for installing solar panels
• Measure light intensity through windows
• Determine the effectiveness of solar film / window tint
• Suitable for measuring the effectiveness of solar film
• Car windows light intensity measurement
• Optimal incident angle for solar panels
• Measurement of the sun s transmission through transparent and film glass

H-10-108-22 Hydrogen Chloride Colorimetric Gas Detection Tube, 20 - 500 ppmv (10 Tubes / Box) by RAE Systems

RAE Systems colorimetric gas detection tubes enable quick, on-the-spot measurement of a wide range of toxic and combustible gases and vapors. RAE Systems tubes are easy to read, and provide a sharp, clear color change directly corresponding to the concentration of gas present. RAE Systems tubes are compatible with the RAE Systems piston hand pump, a reliable way to draw samples of an exact volume required for the most accurate measurements.

Key Features

• Wide assortment of tubes available to detect over 300 gases and vapors
• Easyto use, even in multiple layers of gloves
• Easy-to-read with sharp,clearcolorchange
• No calibration or other maintenance required

Applications

• Oil and gas
• Chemicals and petrochemicals
• Agriculture and pestcontro
• Food and beverage production
• Environmental protection
• Fire service
• HazMat response
• Nationalsecurity

*Please note we can only ship RKI products to customers within the United States

*Please note we can only ship RKI products to customers within the United States

*Please note we can only ship RKI products to customers within the United States

H-10-112-20 Xylene Colorimetric Gas Detection Tube, 10 - 200 ppmv (10 Tubes / Box) by RAE Systems

RAE Systems colorimetric gas detection tubes enable quick, on-the-spot measurement of a wide range of toxic and combustible gases and vapors. RAE Systems tubes are easy to read, and provide a sharp, clear color change directly corresponding to the concentration of gas present. RAE Systems tubes are compatible with the RAE Systems piston hand pump, a reliable way to draw samples of an exact volume required for the most accurate measurements.

Key Features

• Wide assortment of tubes available to detect over 300 gases and vapors
• Easyto use, even in multiple layers of gloves
• Easy-to-read with sharp,clearcolorchange
• No calibration or other maintenance required

Applications

• Oil and gas
• Chemicals and petrochemicals
• Agriculture and pestcontro
• Food and beverage production
• Environmental protection
• Fire service
• HazMat response
• Nationalsecurity

Measuring Range: -50 to +80°C

1421300 Copper Test: Hach Color Disc Free Copper by AquaPhoenix

Copper may exist in natural waters and effluents as a soluble salt or as suspended solids. A small amount is essential for plants and animals, and concentrations exceeding 0.1 mg/L are useful for controlling algae and plankton growth. Quantities ranging from 0.02 to 0.1 mg/L are toxic for some fish, so its use for treating fish disease requires careful monitoring. Range: 0.1 - 4 mg/L; contains 100 tests.

• Simple, low-cost color disc method is the most accurate visual test kit method
• Kit contains all required reagents and apparatus in a rugged carrying case for analysis in the field

GHS1053 Flextop Wall Chart (24" x 36") by GHS Safety

HazCom GHS Information Wall Chart provides a comprehensive overview of new HazCom GHS labelling requirements printed on a durable and rigid, 1/8" thickness plastic material called Flextop. The chart details the 3 main hazard groups: Physical, Health & Environmental. The requirements for supplier labels when decanting or transferring hazardous chemicals; visual representations of the precautionary statement pictograms; and a list of the information required on a Safety Data Sheet. Flextop version of HazCom GHS information Wall charts allow for easy mounting on uneven or difficult surfaces and still maintain a smooth flat surface in your facilities where HazCom GHS refresher information is needed. Indoor or outdoor applications. Available in 24" x 36" with 4 pre-drilled mounting holes.

AI4205 T500-S1 AMCO Turbidity Standard Calibration Solution Kit (20/100/400/800NTU) for TN500 by Apera

The standards have a guaranteed one-year shelf life even if you've opened the bottle and happened not to have recapped it tightly.

The convenient submicron polymer suspensions are non-toxic primary calibration standards approved by the US EPA for drinking water analysis for turbidity.

• Standard Calibration Solution Set for Apera Instruments White Light Portable Turbidity Meters (TN500 and TN420)
• AMCO Clear® turbidity standard solutions (20.0 NTU, 100 NTU, 400 NTU, 800 NTU).
• AMCO Clear® is an EPA approved primary standard for calibration of turbidity sensors that is safe, non-toxic and disposable. It is easy-to-use with no dilution or resuspension, and it is available in a wide range of values.

Old Part Number: 105575
New Part Number: J105575PA

GHS1212 Flame Hazard Class Pictogram Label (1"), 1120/Pad by GHS Safety

Provide your employees with a quick and easy way to identify Personal Protective Equipment & Hazard Class requirements. GHS labels are manufactured on a high gloss paper stock with pressure sensitive adhesive for ease of application and longer durability. Designed to be used with you in house labeling system where color printing isn't an option.

Make clean, professional looking labels in minutes. Labels are printed in sheets and padded with a cardboard backer for ease of use. Each sheet is perforated to allow removal when completed.

Labels are sold in pads. 1" diameter labels come 1,120 labels per pad. 1/2" diameter labels come 1,820 per pad.

WD-00652-44 Traceable® Conductivity and TDS Standard, Individually-Tested, 10 μS; 500 mL by Oakton

• Oakton® Traceable® conductivity and TDS standards have detailed labels: KCl, NaCl, and 442 conversions, temperature corrections, and certified values referenced to 25°C-convenient!!
• Average accuracy at 25°C is ±0.25 microsiemens for 1, 5, 10 microsiemen (μS) solutions, or ±0.25% for all other solutions. The tested uncertainty is shown on the certificate, whichever is greater
• Conductivity options range from 1 to 200,000 μS/cm
• Individually-tested solutions are certified by the bottle - each bottle is analyzed for the best accuracy

METHODS SUPPORTED

Certified reference material meets test requirements for Federal, State, and local agencies, CAP, ASTM, NCCLS, CLSI, ACS, CLIA, AOAC, EPA, APHA, AWWA, WEF, USGS, USP, and ISO. Traceable® Conductivity Standards complies with and is essential for use in these official methods: AOAC 973.40, EPA 120.1, Standard Method 2510 (APHA, AWWA, WEF), ISO 7888, DIN 38404, ASTM D1125, USGS I-1780, USP 645, and for A2LA/NVLAP accreditations/ISO 9000 certifications. Material may be used to calibrate all conductivity meters and to determine all conductivity cell constants.

A2LA ACCREDITATION ISO/IEC 17025:2005 (1750.01)

To assure accuracy an individually serial-numbered Traceable® Certificate is supplied to indicate traceability to standards provided by NIST (National Institute of Standards and Technology) and/or a National Standards Laboratory. A2LA accredited certification provides the highest achievable level of quality assurance, documentation, and accuracy. Conductivity Standards are produced in an A2LA accredited ISO/IEC 17025:2005 (1750.01) calibration laboratory. Additional certifications include ISO 31 (certificate content) and ISO 35 (statistical analysis), plus ISO 9001 (certified quality manufacturer).

• All Oakton® Traceable® conductivity standards are NIST-traceable reference materials
• Supplied with a calibration report from an ISO 17034 and ISO 17025 accredited laboratory
• These standard solutions let you calibrate conductivity instruments to ensure accuracy
• If unopened, shelf life is one year; once opened, shelf life will vary by solution value
• Use when readings are expected to be around 10 μS/cm

INCLUDES

temperature compensation chart, TDS conversion chart, and NIST-traceable calibration certificate with data.