$100 - $150

F501-S 3-in-1 Fluoride Electrode (built-in temperature sensor) by Apera

The F501-S Fluoride Ion Electrode is the replacement electrode for Apera Instruments WS100/WS200 Fluoride Meter. It's featured with a 3-in-1 combination structure, which provides a convenient user experience and reliable measuring performance. Connector: 8-pin; Cable length: 3 ft.

Part Number: CG2J2.534

98767-62 Traceable Ultra™ Refrigerator/Freezer Thermometer with Calibration; 2 Plastic Bottle Probes by Digi-Sense

Accurately monitor temperatures in refrigerators, freezers, water baths, and incubators. Thermometers have accuracy of ±0.5°C (-30 to 50°C). Built-in audible and visual alarms activate when temperature rises or falls below the alarm set point, and is programmable in 0.1° increments.

Traceable® Products have an individually-numbered Traceable® Certificate provided with each unit, that assures accuracy from our ISO/IEC 17025:2017(1750.01) calibration laboratory accredited by A2LA. It indicates traceability of measurements to the SI units through NIST or other recognized national measurement institutes (NMI) that are signatories to the CIPM Mutual Recognition Agreement. Each product goes through an intense vetting process before it can carry the Traceable name, thus saving you both time and money by not having to calibrate separately.

Thermometer comes with plastic bottle probes filled with nontoxic glycol solution, eliminating the possibility of contamination from mercury. Solution is GRAS (generally recognized as safe) by the FDA. The solution filled bottle simulates the temperature of other stored liquids and eliminates the rapid temperature fluctuation caused by opening the refrigerator/freezer door.

• Includes NIST-Traceable certificate from our A2LA accredited (1750.01) calibration laboratory|Triple display simultaneously shows MIN/MAX and current temperature|10-ft microcable allows refrigerator/freezer doors to close on it
• Temperature-buffered glycol bottle probe mimics solution

Includes

plastic bottle probes with 10-ft cable, flip-open stand, hook-and-loop strips, magnetic strips, wall mount, batteries, and NIST-traceable calibration certificate with data.

768JC-02 Panel Mount Digital Thermometer with Analog Voltage Output, Type J, Range 0 to 220 °C by Jenco

Panel mount digital thermometer with analog voltage output of 1 mV per digit, with analog output accuracy of ± 0.5% of span ± 1 digit, features a bright red LED display and 1/8 DIN plastic housing. Available in types. J or K with 4 available temperature ranges per type, specify degrees °C or °F. Ambient range 0 to 40°C. 115/230V AC operation.

18525-05 Type J Spring Loaded Ind Thermocouple Probe Probe 4" L, 12" Ext .250 Dia, Ung Jct by Digi-Sense

These probes cannot be inserted directly into a medium. Spring loaded industrials are not sealed where the threads meet the probe. They must be inserted into a thermowell or other sealed vessel.

The temperature range is for the probe tip only. The handle material may be affected if the probe is rated higher than the handle depending on exposure time, application, and handle material. ABS handles are rated to 220°F (104°C); PVC handles are rated to 200°F (93°C); Stainless Steel handles are rated at 450°F (232°C); Mini Connectors are rated to 392°F (200°C)

• The probes can be installed with current housing without having to purchase a whole new industrial assembly
• Response Time: 3.75 seconds or greater
• Each probe comes with ½" NPT insertion threads
• Probes are spring loaded which allows the probe to be bottomed out into a thermowell
• Probes are welded and sealed which allows for direct insertion into a vessel
• Custom designs or changes to this product are available upon request
• Each probe comes with a color coded ANSI stripped leads: type J-red/white, type K-red/yellow, type T-red/blue

WD-20250-57 1000A AC Clamp Meter with NIST-Traceable Calibration by Digi-Sense

Reliably detect and measure the power quality running to your equipment to quickly find hidden issues. These meters feature durable, double-molded plastic housing and jaw.

Features

• Reliable measurements, guaranteed! Precalibrated to NIST-traceable standards
• Large backlit display provides easy-to-read measurements
• Autorange feature automatically selects optimal measuring range
• Low-battery indicator alert for when it s time for a fresh battery

400 A AC Clamp Meters (20250-55, -56)

• Diode testing, continuity check with a buzzer sound at 50 ?, and a measurement rate of 2 readings per second
• Built-in noncontact AC voltage detector
• CAT III-1000 V safety rating
• Improved measurement ease with data Hold function
• Model 20250-56 also measures DC current and capacitance, and features a peak Hold function that captures the peak AC current or voltage reading

1000 A AC Clamp Meters (20250-57, -58)

• Improve accuracy with True RMS check for load current and AC voltage, as well as continuity of contacts, fuses, circuits, and switches
• See power variations on analog bar graph display
• CAT III-600 V safety rating
• Model 20250-58 also features DC current measurement and True RMS for more accurate current readings

Applications

• Electrical
• Industrial
• Laboratory
• HVAC
• R & D

Includes

Test leads, temperature probe (models 20250-55, -56, and -58), carrying case, 9 V battery, and NIST-traceable calibration report supplied by InnoCal.

Old Part Number: 101125
New Part Number: J101125LA

90550-35 Dampened Adjustable Angle Bimetal Thermometer, 3" Dial, 2.5" L/0-250F/-20-120C by Digi-Sense

Accuracy is ±1% full-scale when stem is immersed 2" in liquids or 4" in gases (immerse models with a 2.5" stem length 2" in gases). Measured stem length from the top of the threads to the bottom tip of the stem. Stem dia is 0.25"; threaded connection is 1/2" NPT(M). All thermometers meet or exceed ASME B40.3 standards. Maximum environmental temperature for glass lens thermometers is 500°F (148°C).

• Dampened movement
• More economical than silicone gauges
• Greater temperature range than silicone-filled gauges
• Anti-parallax dial for accurate readings
• Eliminate the risk of a leaking case and cross-contamination
• Hermetically sealed per ASME B40.3 standard to prevent fogging and protect against tough environments
• Rugged 304 stainless steel construction with a clear glass lens
• Recalibrate using the external reset screw

90446-83 Probe Type J 316 Stainless Steel 12" L Iron Heads by Digi-Sense

These MgO thermocouple assemblies consist of a single or dual thermocouple element constructed of various sheath materials, assembled together with a connection head.

Features

• Inconel, 316 Stainless steel or 304 Stainless steel sheath materials
• 1/2" X 1/2" NPT stainless steel hex nipple for head mounting fittings
• Aluminum screw cover, Cast iron screw cover, or Cast iron/aluminum explosion proof class C Heads
• Standard Limits of Error
• Grounded Measuring Junction
• Custom built assemblies available upon request

90447-40 Probe RTD 1/4" OD 9" L Miniplug by Digi-Sense

Resistance Temperature Detectors, or RTDs, are used in many process and laboratory applications where accuracy and repeatability are of prime importance. RTD elements are available in many different materials and with different temperature coefficients. The most commonly used element is a wire-wound platinum element, conforming to the DIN standard and with a .00385 temperature coefficient.

Key Features

• All probes are low range
• 316 stainless steel sheath material
• Extension leadwire transition with relief spring (350,°F)
• 3-wire RTD, 100 Ω
• Accuracy ±0.1%
• -328 to 400°F (-200 to 204°C)
• .00385°C temperature coefficient
• Constructed using PTFE Insulated silver plated copper internal leads

VK12 Multi Bracket T-Slot Mount

WD-35634-12 EcoTestr™ Salt1 Waterproof Pocket Tester by Oakton

Designed to be durable and easy to use

These economical, simple-to-use pocket testers quickly measure conductivity, TDS, or salinity levels accurately while simultaneously displaying the temperature. A large dual-line display makes viewing measurements easy and features indicators for measurement stability, calibration, and battery life.

Additional features include a long-lasting, durable electrode with polymer reference electrolyte, auto recognition of calibration standards, and self-diagnostics. The IP67-rated housing features an easy-to-grip design and floats if accidentally dropped in water when sensor cap is on. The testers, powered by four AAA batteries, can operate up to 400 hours continuously. The unit will auto power-off after 8 minutes of nonuse to conserve power.

• View measurements clearly on large LCD
• Rugged IP67-rated housing is waterproof, dustproof, and floats in water
• Leakproof cap with fill line functions as a sample/calibration and hydrating cup
• Secure attach a lanyard to prevent losing or dropping in the field
• Auto shutoff extends battery life

Part Number: M4CKCC

2610910 Bacteria Tests: Hach Paddle Test Total Aerobic Bacteria / Total Coliforms 10 pk by AquaPhoenix

Hach Paddle Testers allow fast, easy screening of water samples, solid surfaces, and nonviscous liquids where unsanitary conditions may exist. The paddle is a double-sided slide attached to the vial cap. Each side of the slide is used to perform a separate test. The slide has a molded-in grid for easy colony counting without opening the optically clear, leakproof vial.
Paddle Tester, Total Aerobic Bacteria/Total Coliforms (Tryptic Soy Agar/Violet Red Bile Agar), pk/10.

• Save time and simplify lab and field testing with Hach prepared P/A media
• Report Total Coliform values with EPA accepted Presence-Absence bottles and media
• Simplify routine testing with self-contained, easy-to-use Paddle Testers and BART™ products

*Please note we can only ship RKI products to customers within the United States