$100 - $150

H-10-137-30 Butane Colorimetric Gas Detection Tube, 25 - 1,400 ppmv (10 Tubes / Box) by RAE Systems

RAE Systems colorimetric gas detection tubes enable quick, on-the-spot measurement of a wide range of toxic and combustible gases and vapors. RAE Systems tubes are easy to read, and provide a sharp, clear color change directly corresponding to the concentration of gas present. RAE Systems tubes are compatible with the RAE Systems piston hand pump, a reliable way to draw samples of an exact volume required for the most accurate measurements.

Key Features

• Wide assortment of tubes available to detect over 300 gases and vapors
• Easyto use, even in multiple layers of gloves
• Easy-to-read with sharp,clearcolorchange
• No calibration or other maintenance required

Applications

• Oil and gas
• Chemicals and petrochemicals
• Agriculture and pestcontro
• Food and beverage production
• Environmental protection
• Fire service
• HazMat response
• Nationalsecurity

GHS1256 Clear Workplace Label Protectors (8.5" x 14"), 100/Pkg by GHS Safety

Use GHS clear poly shields as long term protection for you workplace labels. Shields offer surface protection from weather and off chemical resistance. Shields are sized to match GHS stock workplace label sizes. 8.5? x 14? 100/package

1421300 Copper Test: Hach Color Disc Free Copper by AquaPhoenix

Copper may exist in natural waters and effluents as a soluble salt or as suspended solids. A small amount is essential for plants and animals, and concentrations exceeding 0.1 mg/L are useful for controlling algae and plankton growth. Quantities ranging from 0.02 to 0.1 mg/L are toxic for some fish, so its use for treating fish disease requires careful monitoring. Range: 0.1 - 4 mg/L; contains 100 tests.

• Simple, low-cost color disc method is the most accurate visual test kit method
• Kit contains all required reagents and apparatus in a rugged carrying case for analysis in the field

GHS1255 Clear Workplace Label Protectors (8.5" x 11"), 100/Pkg by GHS Safety

Use GHS clear poly shields as long term protection for you workplace labels. Shields offer surface protection from weather and off chemical resistance. Shields are sized to match GHS stock workplace label sizes.

8.5" x 11" 100/package

CS150-K=0.1/BNC Light-Duty Contacting Conductivity / TDS Sensor with Automatic Temperature Compensation (ATC), Graphite, 12mm, K=0.1, BNC by Sensorex

The CS150 and CS150TC conductivity probes are a cost effective solution for measuring conductivity in light industrial and laboratory applications.

Sensors feature measuring surfaces. The durable epoxy body construction provides a rugged and dependable sensor for portable and laboratory use. Suitable for use with most portable conductivity meters.

By adding a simple mounting gland fitting, customers may use these in process applications. Mount them in-line, in a pipe "T" fitting, or submerse them into a tank.

Features:

• Ideal for laboratory and light duty process applicationsAvailable with or without ATC (temperature sensor)
• Easy to submerge in a tank or mount inline in a pipe
• Cell constant choices of 0.1 or 1.0
• Compatible with most portable and benchtop meters

F501-S 3-in-1 Fluoride Electrode (built-in temperature sensor) by Apera

The F501-S Fluoride Ion Electrode is the replacement electrode for Apera Instruments WS100/WS200 Fluoride Meter. It's featured with a 3-in-1 combination structure, which provides a convenient user experience and reliable measuring performance. Connector: 8-pin; Cable length: 3 ft.

18525-21 Type J Spring Loaded Ind Thermocouple Probe Probe 12" L, 12" Ext .250 Dia, Ung Jct by Digi-Sense

These probes cannot be inserted directly into a medium. Spring loaded industrials are not sealed where the threads meet the probe. They must be inserted into a thermowell or other sealed vessel.

The temperature range is for the probe tip only. The handle material may be affected if the probe is rated higher than the handle depending on exposure time, application, and handle material. ABS handles are rated to 220°F (104°C); PVC handles are rated to 200°F (93°C); Stainless Steel handles are rated at 450°F (232°C); Mini Connectors are rated to 392°F (200°C)

• The probes can be installed with current housing without having to purchase a whole new industrial assembly
• Response Time: 3.75 seconds or greater
• Each probe comes with ½" NPT insertion threads
• Probes are spring loaded which allows the probe to be bottomed out into a thermowell
• Probes are welded and sealed which allows for direct insertion into a vessel
• Custom designs or changes to this product are available upon request
• Each probe comes with a color coded ANSI stripped leads: type J-red/white, type K-red/yellow, type T-red/blue

2653299 Ammonia Salicylate Reagent Powder Pillows, 10 mL by AquaPhoenix

For determination of Ammonia Nitrogen by the Salicylate method. Hach Method 8155.
Range: 0.01 - 0.50 mg/L NH3-N. Sample Size: 10 mL.
Pack of 100 Powder Pillows.

Wall, desk or vehicle storage compartment mounting, holds T3 firmly for charging.

Part Number: CG2RX103

98768-61 Traceable Folding Stem Thermometer with Calibration, NSF-Certified; 1 2.8" Stainless Steel Probe by Digi-Sense

These digital thermometers are ideal for food applications. The silver-impregnated coating is 99% effective, and 100% safe! The stainless-steel probe is resistant to both corrosion and chemicals. Fold-up penetration sensor protects both the user and the probe from damage.

Obtain a measurement within 0.9°C in seconds! The wide range covers 99% of routine temperature checks: -40.0 to 250.0°C, with a resolution of 0.1° and ±0.5°C accuracy from -20 to 250°C, ±1.0°C otherwise.

The IP65 rating is ideal for wet areas. Protected against splashes and minor jets of water (like those from a tap), and ideal for kitchen and lab use. A magnetic back lets you stick the thermometer in convenient locations; its compact, foldable size lets you put it in your pocket.

Traceable® Products have an individually-numbered Traceable® Certificate provided with each unit, that assures accuracy from our ISO/IEC 17025:2017(1750.01) calibration laboratory accredited by A2LA. It indicates traceability of measurements to the SI units through NIST or other recognized national measurement institutes (NMI) that are signatories to the CIPM Mutual Recognition Agreement. Each product goes through an intense vetting process before it can carry the Traceable name, thus saving you both time and money by not having to calibrate separately.

• Includes NIST-Traceable certificate from our A2LA accredited (1750.01) calibration laboratory|Rapid-response means readings within 0.9°C in 2 to 3 seconds|Foldable stem can be used at any angle|Use in messy and wet areas - antimicrobial coating and IP65 rated
• NSF-certified - ideal for use in the food industry|Thermometer is preset to Fahrenheit

Includes

NIST-traceable calibration certificate with data and battery.