Test and Measurement

ADF25A Differential Probe by Test Products International

Selecting the correct oscilloscope probe ensures accuracy and can improve the performance of your test instrument. TPI offers a wide range of high quality oscilloscope probes designed to meet the most demanding applications.

The IP series monolithic probes have switchable attenuation and are available in 60 and 250MHz. These probes are ideal for technicians that need a basic oscilloscope probe.

The slimline design P and SP series probes are available in fixed or switchable attenuation. These series of probes are perfect for the technician needing additional features such as replaceable cable and interchangeable probe tip. The compensation adjustment for these probes is located in the BNC to eliminate noise pickup.

TPI also offers three models of high voltage differential probes all with high common mode rejection, wide bandwidth, and fast rise times. Differential probes enable the viewing of signals not referenced to earth ground and provide better performance than a matched pair of single ended oscilloscope probes when measuring these types of signals.

Several important factors must be taken into account when selecting the proper probe.

• The probe should have sufficient bandwidth and rise time for the test instrument and application. Choose a probe with at least an equal bandwidth as the scope it will be used with. For best performance a probe with twice the bandwidth as the scope should be selected
• For oscilloscope probes, the input capacitance of your oscilloscope should be within the compensation range specification of the probe. In addition, if your oscilloscope has readout function, select a probe with this capability
• For differential probes, make sure the maximum differential voltage is adequate for your application and the common mode rejection specification meets the requirements of the tests being performed.

Features

• Attenuation: Ratio of the output signal to the input signal. Attenuation should remain constant decreasing by 3dB only as the frequency increases to the maximum bandwidth.
• Bandwidth: The maximum -3dB frequency that can be expected.
• Cable Length: Length of the cable from the end of the probe to the end of the connector. It is important to use a probe with just enough cable length for your needs. Long cables increase the capacitance and propagation delay of the probe.
• Compensation Range: The range a probe can be compensated to match the input capacitance of the test equipment it is being used with.
• IEC 1010: Probes with the IEC 1010 category rating have been designed for safety.
• Input Impedance: The total resistance and capacitance as measured at the tip of the probe. This specification is used to define the loading effect of a probe. At frequencies under 1MHz the input resistance of the probe will have the most influence. At higher frequencies the input capacitance will have the most influence.
• Max Input Voltage: The maximum voltage the probe can be used at.
• Max Differential Voltage: The maximum differential voltage that can be measured by a differential probe
• Readout: Probes with this capability are compatible with readout function oscilloscopes that automatically detect and display the attenuation factor of the probe.
• Rise Time: The time required for the leading edge of a pulse to rise from 10% to 90% of its final value.
• CMRR: Common Mode Rejection Ratio. A measure of a differential probes ability to reject any signals common to both test points in a differential measurement

Applications

• Use TPI Probes with Bench Top, Portable, Analog, and Oscilloscopes
• Logic signal and waveform tests
• Measure voice / data signals
• Analyze power quality
• Test motor control circuits

Markets

• Electronic
• Communication
• Commercial
• Industrial

0572 9001 Penetration Probe TC with Ribbon Cable, Type K, Cable Length 2 m, IP 54 by Testo

This thermocouple (TC) temperature probe with penetration tip can be used for measurements in pastes and semi-solid media and also for measurements in liquids and air.

The temperature probe features a thin, 2 m long ribbon cable. The thin ribbon cable can also be placed through narrow openings such as slits in doors or refrigerator seals.

Protection class IP 54 means that the temperature probe with penetration tip is protected against spray water.

This Type K, Class 1 thermocouple probe has a standardized accuracy of ±2.7 °F (±1.5 °C).

The temperature probe's response time t99 (time it takes for the probe to register 99% of the jump in temperature) of 7 seconds refers to measurements in moving water at 140 °F (+60 °C). This response time is extended when, for example, measurements are taken in still liquid, pastes or air.*

The perfect probe for any application

Don't see the temperature probe you are looking for? Please contact us directly. We have a large range of standard temperature probes and we also manufacture customized probes specifically according to your personal requirements.

* For air temperature measurements, the response time is about 40 - 60 times higher than the indicated value measured in water. If you should require a rather sluggish temperature probe to measure air temperature, this probe is particularly suitable because it does not take brief temperature peaks into account at all, or only to a very small degree, when measuring temperature. For example, if you are planning to use the temperature probe with penetration tip to measure air temperature in the refrigerator, briefly opening the refrigerator door would not take into account the temperature fluctuation which results from mixing the warm room temperature with the refrigerator temperature.

If you need an air temperature probe with a fast response time, your best choice would be the exceptionally fast temperature probe 0602 0493 which has a large measuring range.

• TC Type K temperature probe with exceptionally flat cable, which can be pushed through narrow openings, e.g. through slits in doors
• Temperature measurement in pastes and semi-solid media and also in liquids and air
• Measuring range: -40 to 428 °F (-40 to +220 °C)

Includes:

1 x TC Type K temperature probe with penetration tip 0572 9001, can be connected to the testo Saveris 2-T3 Wi-Fi data logger

ADF25 Differential Probe by Test Products International

Selecting the correct oscilloscope probe ensures accuracy and can improve the performance of your test instrument. TPI offers a wide range of high quality oscilloscope probes designed to meet the most demanding applications.

The IP series monolithic probes have switchable attenuation and are available in 60 and 250MHz. These probes are ideal for technicians that need a basic oscilloscope probe.

The slimline design P and SP series probes are available in fixed or switchable attenuation. These series of probes are perfect for the technician needing additional features such as replaceable cable and interchangeable probe tip. The compensation adjustment for these probes is located in the BNC to eliminate noise pickup.

TPI also offers three models of high voltage differential probes all with high common mode rejection, wide bandwidth, and fast rise times. Differential probes enable the viewing of signals not referenced to earth ground and provide better performance than a matched pair of single ended oscilloscope probes when measuring these types of signals.

Several important factors must be taken into account when selecting the proper probe.

• The probe should have sufficient bandwidth and rise time for the test instrument and application. Choose a probe with at least an equal bandwidth as the scope it will be used with. For best performance a probe with twice the bandwidth as the scope should be selected
• For oscilloscope probes, the input capacitance of your oscilloscope should be within the compensation range specification of the probe. In addition, if your oscilloscope has readout function, select a probe with this capability
• For differential probes, make sure the maximum differential voltage is adequate for your application and the common mode rejection specification meets the requirements of the tests being performed.

Features

• Attenuation: Ratio of the output signal to the input signal. Attenuation should remain constant decreasing by 3dB only as the frequency increases to the maximum bandwidth.
• Bandwidth: The maximum -3dB frequency that can be expected.
• Cable Length: Length of the cable from the end of the probe to the end of the connector. It is important to use a probe with just enough cable length for your needs. Long cables increase the capacitance and propagation delay of the probe.
• Compensation Range: The range a probe can be compensated to match the input capacitance of the test equipment it is being used with.
• IEC 1010: Probes with the IEC 1010 category rating have been designed for safety.
• Input Impedance: The total resistance and capacitance as measured at the tip of the probe. This specification is used to define the loading effect of a probe. At frequencies under 1MHz the input resistance of the probe will have the most influence. At higher frequencies the input capacitance will have the most influence.
• Max Input Voltage: The maximum voltage the probe can be used at.
• Max Differential Voltage: The maximum differential voltage that can be measured by a differential probe
• Readout: Probes with this capability are compatible with readout function oscilloscopes that automatically detect and display the attenuation factor of the probe.
• Rise Time: The time required for the leading edge of a pulse to rise from 10% to 90% of its final value.
• CMRR: Common Mode Rejection Ratio. A measure of a differential probes ability to reject any signals common to both test points in a differential measurement

Applications

• Use TPI Probes with Bench Top, Portable, Analog, and Oscilloscopes
• Logic signal and waveform tests
• Measure voice / data signals
• Analyze power quality
• Test motor control circuits

Markets

• Electronic
• Communication
• Commercial
• Industrial

0572 2031 Saveris 2-T1 WiFi Data Logger by Testo

The testo Saveris 2 WiFi data logger system is the modern solution for monitoring temperature and humidity values as well as CO₂ concentration in storerooms and work rooms.

Installing the system is child's play, and can be carried out either via a browser, or with the testo Saveris 2 App. The WiFi data loggers reliably record temperature, humidity and CO₂ concentration at adjustable intervals and transmit the measurement values directly by wireless LAN to the Testo Cloud.

The readings stored can be analyzed at any time, anywhere, using an internet-enabled smartphone, tablet or PC. Limit value violations are immediately reported by e-mail, optionally by SMS or via the testo Saveris 2 App as a push notification. This allows critical processes to be kept always under control, even if you are not on site.

The long battery life additionally ensures that the testo Saveris 2 system needs to be serviced only rarely.

• Data transfer by wireless LAN
• All measurement data always available, anywhere, on any instrument
• Alarms when limit values are violated
• With testo Saveris 2 App for easier configuration, push alarms and WiFi range analysis
• Cost-free online data store (Testo Cloud)

628NC ORP/Temperature VisionPlus Pen with Memory & Replaceable ORP Electrode by Jenco

VisionPlus ORP628N is a very powerful ORP tester with temperature readout, IP67 rated body, 50 memory storage and replaceable ORP electrode module.

• Clear graphic LCD displays ORP and temperature at the same time
• Replaceable electrode module ensures extended usefulness
• IP67 water-proof, dust-proof body
• Battery life over 300 hours
• 50 memory storage of both ORP and temperature readings with memory location ID and date and time stamp
• Low battery indicator
• RoHS compliant

NX6-RF1-A00 Nautiz X6 Rugged Mobile 6-inch Widescreen Tablet, 4G/Global, BT,WLAN, Camera, NFC, GPS, Battery by Handheld

If you could take the high-visibility functionality of a tablet and the go-anywhere performance of a rugged handheld and combine them, you'd end up with one device that could take you through your workday with ease. Fortunately for you, this state-of-the-art solution already exists: it's the Nautiz X6 ultra-rugged Android phablet.

SMALL PROFILE, BIG IMPACT

The Nautiz X6 brings the best of a conventional tablet and a traditional rugged handheld in a single device. It has the large-screen functionality of a tablet, with the work-anywhere ruggedness of a handheld. Enjoy an expansive 6-inch touchscreen display that's sunlight-readable and protected by super-hardened Gorilla Glass. And this winning combination is still lightweight and super slim, making it a perfect rugged phablet to easily bring anywhere.

REAL-WORLD CAPABILITIES IN THE RUGGED WORLD

The Nautiz X6 ultra-rugged Android phablet is ideal for rough-and-tumble applications like surveying and GIS, with a superior u-blox NEO-M8N receiver for highly accurate navigation using GPS or Galileo. In the warehouse, read NFC tags, or use one-button scanning to track virtually anything. The high-res rear/front cameras capture detailed images, and an array of sensors carry the load for a multitude of tasks. The Nautiz X6 fits perfectly in your mobile workforce - whether you are in utilities, foodservice, field service, GIS, warehousing, or logistics.

DESIGNED SPECIFICALLY FOR OUTDOOR WORK

Field workers need a tool that can handle the job anywhere, and last as long as the shift does. The ultra-rugged Nautiz X6 has both covered. It meets a wide range of the MIL-STD-810G test standards for operating in extreme temperatures, handling drops, vibrations, humidity and altitude. An IP67 rating means that the Nautiz X6 is fully dust- and waterproof. And it's got serious staying power; the robust user-replaceable battery can work even multiple shifts on a single charge.

ANDROID OREO MEANS SEAMLESS DEVICE MANAGEMENT

Just like all Handheld rugged computers, the Nautiz X6 Android phablet is an amazingly versatile communication tool. Android Oreo brings important speed and battery benefits. And Android for Enterprise, coupled with Handheld's proprietary MaxGo software, means easier deployments over large enterprises. Choose from a broad spectrum of communication technologies, including WLAN, cellular (WWAN), BT and NFC. Workers can connect to each other or the back office, sending, accessing and sharing data and reports seamlessly throughout the workday.

RUGGED ACCESSORIES FOR EFFICIENCY

With a long list of options and accessories, you can configure the Nautiz X6 to your field work needs. Add a 2D imager, or accessories like vehicle docks, pole mounts, stylus pens and more, to customize your rugged Android phablet to get the job done easier, faster and more efficiently.

376 Combination Non-contact (IR) and Contact Thermometer by Test Products International

Thoroughly testing and diagnosing high efficiency HVACR systems or large surface areas can be labor intensive and expensive. Using the appropriate non-contact thermometer can reduce man hours and help insure system performance more easily, accurately and affordably.

Features:

• Laser pointer
• Record function (Min/Max)
• Display data hold function
• Back light
• Trigger switch
• 8:1 distance to spot ratio
• °C and °F selectable
• Gun-type compact design
• Operating lock function
• 9V battery and soft pouch included

Applications

• Heating & AC/R system measurements on all non-metallic and many metallic surfaces
• Troubleshoot overheating devices
• Vent and return temperature measurements
• Tubing, piping and sheet metal temperature

NX8-BW Nautiz X8 New Generation Handheld Computer, 1.5Ghz,1Gb/4Gb, WLAN, Bluetooth, 8MP Camera, GPS, Compass, Altimeter and G-Sensor, Windows WEH 6.5.3 by Handheld

A front-runner in the new generation of handheld computers, the ergonomic Nautiz X8 delivers the largest, most brilliant capacitive touchscreen in its class, along with an unprecedented combination of processing power, connectivity and field ruggedness.

The Nautiz X8 won't just keep up with you it'll lead the way. This dynamic handheld features a high-speed Texas Instruments 4470 dual-core 1.5 GHz processor, 1 GB of RAM, 4 GB of iNAND Flash and a 5200 mAh Li-ion battery that lasts up to 12 hours on a single charge. A choice of operating systems Android 4.2.2 or Windows Embedded Handheld 6.5.3 allows you to choose the most suitable platform for your needs.

Each detail of the Nautiz X8 is meticulously designed for field use, without sacrificing style or ergonomics. Its 4.7-inch high-brightness screen is the largest you'll find on any comparable computer, and you can operate the state-of-the-art capacitive touchscreen using light touch and multi-finger gestures the same way you use your personal smart devices. The Nautiz X8's ruggedness is unparalleled. It's IP67-rated and meets stringent MIL-STD-810G U.S. military standards, which means it's impervious to both dust and water and can survive repeated drops, strong vibrations and operating temperatures ranging from -30 C to 60 C (-22 F to 140 F) all in a sleek, attractive 490 gram (17.3 ounces) package.

The Nautiz X8 offers an exceptional combination of connectivity options and standard features, including a dedicated u-blox GPS receiver, Bluetooth 2.0 and 802.11b/g/n WLAN functionality. A built-in 8-megapixel camera with autofocus and an LED flash lets you capture visual data quickly and easily, and connectivity through GSM/UMTS or CDMA phone data transmission keeps you connected wherever you go. Measure acceleration and orientation with the built-in G-sensor/accelerometer and gyroscope, or navigate with the integrated compass and altimeter. This handheld also features an open architecture and an extension cap system that lets you connect additional hardware such as sensors, radios and other add-ons.

The feature-rich Nautiz X8 comes ready for your team with application possibilities in forestry, public safety, field service and GIS/surveying, and it's adaptable to your work environment and performance requirements.

Carry it, wear it in a holster, toss it in your bag or mount it on your vehicle but whatever you do, keep the rugged, reliable Nautiz X8 close at hand. You'll wonder what you ever did without it.

Included Accessories

• Power adapter
• Capacitive stylus
• Battery
• Hand strap
• Headset
• USB cable
• Quick start guide

0563 5915 915i - Smart Probe Set (TC type K) - includes air probe, immersion/penetration probe, surface probe, carry case by Testo

The testo 915i temperature kit with temperature probes will enable you to tackle your temperature measurements with greater speed, flexibility and ease: Included is a wireless thermometer testo 915i, an air probe, an immersion/penetration probe and a surface probe (all TC type K, class 1). The handle is compatible with all standard type K thermocouple probes &nadsh; making it versatile. Thanks to Bluetooth and the testo Smart App, operation, evaluation and documentation can be carried out with exceptional ease and flexibility.

• Robust, fast-response immersion/penetration probe (TC type K, class 1), measuring range -50 to +400 °C, application: Temperature measurement in liquids, pastes and semi-solid media
• Fast-response surface probe (TC type K, class 1) with sprung thermocouple strip, measuring range -50 to +350 °C, application: Temperature measurement on flat and non-planar surfaces, e.g. also for measurements on pipes
• Robust, fast-response air temperature probe (TC type K, class 1), measuring range -50 to +400 °C, application: Measurement of ambient temperature as well as temperatures in ducts and at air outlets
• High measuring accuracy up to ±1.0 °C thanks to system calibration ex-works
• For fast, wireless temperature measurements
• Innovative locking mechanism on the handle for easy, secure attachment of plug-in Testo measuring probes
• Versatile in all temperature-relevant applications: Compatible with all Testo and standard type K thermocouple probes
• testo Smart App: Display of readings, clear graphical presentation of temperature curves, create documentation on site and send as a PDF or CSV file
• Automatic Bluetooth connection to smartphones, tablets or compatible Testo measuring instruments
• Bluetooth with a range of up to 100 m
• Handy, robust housing
• testo Smart Case: Case for safe storage and convenient transportation of thermometer and probes
• Thanks to its proven quality and great durability, you can rely on your Testo Smart Probe in all conditions

Includes:

• Thermometer with smartphone operation, Smart Probe testo 915i
• Air probe (TC type K, class 1)
• Immersion/penetration probe (TC type K, class 1)
• Surface probe (TC type K, class 1)
• testo Smart Case for storage
• Batteries
• Calibration protocol

18528-05 Spade Lugs, Copper, for Type T Thermocouples; 10/pk by Digi-Sense

• Maintain accuracy by choosing spade lugs that match the composition of your thermocouple wires
• Available in the most common reference materials
• Avoid confusion - each connector has the material abbreviation stamped into it
• Sold in packs of ten

HHCARCHARGER-01 Car Charger with Quick Charge, USB Type-C, 12-24V by Handheld

Car Charger with USB-A to USB-C cable.

Features

• Auxiliary power outlet 12-24V
• x1 USB-A socket supporting Qualcomm quick charge 3.0
• x1 USB-A socket supporting 2.4A

Compatibility

• Nautiz X6
• Algiz RT8
• Nautiz X41

NX6-2021 Nautiz X6 Carry Case with Belt Clip by Handheld

Holster solution for the Nautiz X6. Easy installation in belt with the clip solution. The rotating swivel makes it ergonomic and easy to move whilst moving around or sitting down.

Features

• Belt clip
• Rotating swivel
• Compatible with hand strap
• Compatible with NX6EXP-BC

Compatibility

• Nautiz X6

Monitor 200 Compact Radiation Detector by SE International

The Monitor 200 measures alpha, beta, gamma, and x-rays. Its digital display shows readings in your choice of CPM, CPS, μSv/hr, mR/hr, or in accumulated counts. It has a digital display, a red count light, and a beeper that sounds with each count detected. Other features include an adjustable timer, and selectable alert. With the free Observer USB Software Family, you can set computer alarms, calibrate your instrument, and download your collected data from the internal memory for easy reporting!

3621 Industrial pH/ORP Controller, LCD Display, 1/8 Din Panel Mount by Jenco

• Easy to install 1/8 DIN plastic casing.
• Clear LCD displays pH, mV or temperature with backlight.
• Universal power supply input from 100-240VAC.
• Automatic buffer recognition of US and NIST buffer sets. Calibrated data is stored in memory and ready to for use on power up.
• Automatic or manual temperature compensation.
• Displays absolute and relative ORP.
• Two sets of programmable on/off relays for pH or ORP (3621).
• Isolated and reversible 4-20mA current output for pH or ORP allows it to be used as a proportional output (3631).
• RoHs compliant.

08610-20 Traceable® Mount-Anywhere Analog Clock with Calibration; 1.6 inch Diameter by Digi-Sense

Small size and multiple mounting options makes this clock perfect for the individual work area. Includes hook-and-loop fastener and double-sided tape for wall/surface mounting; flat bottom lets you stand it on your shelf, bench, or desk. White numerals and sweeping second hand provide superior visibility.

Traceable® Products have an individually-numbered Traceable® Certificate provided with each unit, that assures accuracy from our ISO/IEC 17025:2017(1750.01) calibration laboratory accredited by A2LA. It indicates traceability of measurements to the SI units through NIST or other recognized national measurement institutes (NMI) that are signatories to the CIPM Mutual Recognition Agreement. Each product goes through an intense vetting process before it can carry the Traceable name, thus saving you both time and money by not having to calibrate separately.

• Includes NIST-Traceable certificate from our A2LA accredited (1750.01) calibration laboratory
• Includes hook-and-loop strip and double-sided tape for fast and easy mounting

Includes

Hook-and-loop fastener, double-sided tape, battery, and NIST-traceable calibration certificate with data.

19601-11 Traceable® Conductivity/TDS Pocket Tester with Calibration by Digi-Sense

Traceable® Products have an individually-numbered Traceable® Certificate provided with each unit, that assures accuracy from our ISO/IEC 17025:2017(1750.01) calibration laboratory accredited by A2LA. It indicates traceability of measurements to the SI units through NIST or other recognized national measurement institutes (NMI) that are signatories to the CIPM Mutual Recognition Agreement. Each product goes through an intense vetting process before it can carry the Traceable name, thus saving you both time and money by not having to calibrate separately.

• Includes NIST-Traceable certificate from our A2LA accredited (1750.01) calibration laboratory
• Waterproof pocket testers fulfill CAP, ASTM, NCCLS, CLSI, ACS, CLIA, AOAC, EPA, APHA, AWWA, WEF, USGS, USP and ISO
• Simply turn on, and insert - dual display shows results and temperature
• Hold key plus arrow keys for calibrating to standards
• Temperature range is 32.0 to 122.0°F (0.0 to 50.0°C)
• Temperature compensation permits readings to be automatically referenced to the international standard of 25°C or user may set a programmable temperature coefficient
• Tester size is 1-1/4 inches in diameter x 6-1/2 inches, weight is 2-1/4 ounces

Includes

NIST-traceable calibration certificate with data.

291 Hand-held Manual Ranging Clamp-on DMM by Test Products International

Digital Clamp-On Meter Amp Plus. The 291 is a hand-held manual ranging clamp-on DMM, an affordable choice offering measurements in all basic electrical functions.

The 291 is a hand-held manual ranging clamp-on DMM. The 291 is an affordable choice offering measurements in all basic electrical functions.

• Bar Graph: When measuring frequency, bar graph indicates current level.
• Peak Mode: For start-up and inrush currents.
• Sleep Mode: Preserves battery life.
• Data Hold: Holds the reading on the display for easy viewing.

Features:

• Agency UL Listed to U.S. and Canadian Safety Standards. Meets CE and IEC 1010.
• 4000 Count Improves the resolution on all functions and ranges.
• Data Hold Maintains the reading on the display for hard to reads areas.
• Peak Mode Measure the inrush current of motors, relays and solenoids.
• Sleep Mode Automatically powers down after 10 minutes of inactivity
• 700 Amps AC
• Measure AC/DC volts, resistance and continuity
• CAT III 600 V rated
• cULus 61010
• 3-year limited warranty

Applications:

• Thermocouples in furnaces and gas appliances
• Heat anticipator current in thermostats
• Test line and control voltage
• Compressor winding resistance
• Contactor and relay coil resistance
• Motor and compressor startup current
• Continuity of wiring
• Measure line current
• Test continuity of circuit breakers and fuses
• Measure voltage of direct drive DC motors
• Measure power supply voltage

The 291 comes complete with the following accessories:

• Carrying Pouch
• Test Lead Set
• Temperature Probe
• Instruction Manual
• Battery

0563 2550 550 Digital Manifold Kit with Bluetooth and Set of 3 Hoses by Testo

The testo 550 Digital Manifold opens up new possibilities for efficient analysis and documentation thanks to the integration of Bluetooth connectivity with the testo Refrigeration App. You can clearly read measurement data, such as automatic calculations of superheat and sub-cool on a Smartphone or Tablet, allowing you to work quickly and conveniently. In addition to this, measurement reports can be created and sent directly from the job site.

The more rugged housing of the testo 550 includes a metal frame around the display which protects the screen from impact. Now with 60 refrigerant profiles standard and the ability to update the refrigerant list directly from the app, you can be confident that your digital manifold will always be up to date. With the added functionality of leak tests and an optional kit which comes complete with hoses, the Testo 550 digital manifold is versatile enough to be the tool for every job.

Includes:

• 550 Digital Manifold with Bluetooth
• Three (3) 60" hoses with 45 degree standard fitting & straight fitting
• 0613 5505 - Two (2) 4.9 ft Clamp Probes (NTC)
• 0516 0012 - Hard carry case
• Certificate of Conformity

• Measures high side / low side pressures and temperatures
• Accurate, simultaneous super heat/subcooling in real time
• App integration via Bluetooth for monitoring and reporting
• 60 refrigerant profiles onboard
• Refrigerant updates in the instrument via App
• 2-way valve block with three connections, large, 2-line backlit display
• 3 year warranty with registration