Vertex

1290-0019 Vertex Base Rack Enclosure by Honeywell Analytics

Vertex™ provides the most sensitive and reliable multi-point low level toxic gas monitoring system backed by physical evidence of an actual gas release.

Vertex™ provides a cost-effective monitoring solution that adapts to your changing gas detection needs

Flexible

Start your Vertex™ System with as little as eight points. As your monitoring needs change, Vertex™ expands, offering you up to 72 points of continuous gas detection. Place your sampling points up to 400 feet (120 meters) from the system. There is a choice of universal analyzer modules and/or pyrolyzer analyzers.

Reliable

Vertex™ offers powerful, built-in system redundancy as standard equipment to effectively safeguard against downtime.

• Back-up pump and internal power module
• Chemcassette® technology provides physical evidence of gas event
• System data back-up. If main data acquisition PC fails, analyzers continue to monitor, log data and alarm
• Drip resistant cap for system protection from overhead leaks
• Automated leak test with line integrity option

Easy to use

• Touch screen for easy access to data
• Software updates via CD-ROM or network to all system components
• Configuration profile editing and data retrieval are all achievable without taking unit offline
• Radio frequency identification tag (RFID) ensures Chemcassettes® are installed into appropriately programmed analyzer, eliminating human error
• On-line help system

Security

• Multiple levels of password protection
• Reconfigure security setup without taking unit offline

Low cost of ownership

• Vertex's™ smaller footprint and greater density of points reduce your cost per point
• Eight points per analyzer lowers Chemcassette® costs
• Maximized 72 point systems provide low cost per point as compared to other continuous monitors
• One system monitors up to nine gas families and more than 40 gases
• You can split your sample to more than one analyzer

Easy to maintain

• Vertex™ uses cost-effective XP Chemcassettes®, providing up to three months of continuous monitoring
• Simplified replacement of Chemcassettes® and automated optics verification
• No dynamic calibration required
• No flow balancing
• Easy access to analyzers, pumps, power supplies and touch screen from front panel
• Onscreen interactive electronic manual

Advanced communications

• Built-in configurable PLCs with optional 176 relay contacts
• Standard OPC interface for easy integration into your existing factory automation system or HMI
• Optional Ethernet/CIP, LONWORKS®, DeviceNetTM, DF1 Interface, PROFIBUS, Modbus Plus, Modbus/TCP or ControlNet outputs available
• Optional Chemcam camera permits viewing of stain, locally or remotely, for proof of gas event. Image is electronically saved for future retrieval.
• Optional remote control/viewing software enables total visualization of the monitor screens at a remote PC

Vertex Win10 Upgrade Kit

VERTEX WIN10 LICENSE DONGLE KIT

110 VAC Vertex MTM Base Rack

220 VAC Vertex MTM Base Rack

Vertex M Windows 10 Upgrade Kit

Vertex PLC Upgrade Kit With PC

1502-2000 Vertex Edge Base Rack Enclosure by Honeywell Analytics

Honeywell Vertex™ Edge delivers the reliable performance and versatility of Honeywell Vertex™ — with a lower cost and easier experience. To help you protect people and assets while reducing downtime, Honeywell Vertex™ Edge provides:

• Authentic Chemcassette® technology for enhanced standard of accuracy: The system detects highly toxic gases quickly and definitively — down to parts per billion (ppb) — as evidenced by a clear, easy-to-view stain on chemically treated tape. This technology, pioneered by Honeywell, delivers low-level gas detection you can count on.
• Monitoring of more than 40 toxic gases: Start with as few as eight sampling points and add up to 72. Place each point up to 400 feet (120 meters) away for flexible reach.
• Lower cost of ownership: Get a lower system price than Honeywell Vertex™ — plus Chemcassette® tapes for ammonia, hydrides and mineral acids that last six months instead of the usual three. That means double the usage at a lower operating cost.
• Smart, intuitive interface for enhanced performance and simple operation: Touchscreen and large icons make it easy to see gas readings, alarms, event logs, real-time trends and overall system status. Minimal training required.

MORE FEATURES & BENEFITS

• FRONT ACCESS: Easily service the power and data cables with a clear view of the touchscreen and Chemcassette® analyzers. Pullout tray makes it easy to replace and service pumps.
• SIMPLIFIED OUTPUT: Vertex Edge offers Modbus TCP and Modbus RTU for interfacing to your sites control systems.
• EASY TUBE MANAGEMENT: Quickly identify sampling tubes for corresponding analyzers, so you can address a fault or install a new point.
• NO-SCREW SERVICE PANELS: Access the inside of the unit with keylock and latch — no screwdriver needed.
• SMART REMINDERS: Use the touchscreen to set customized reminders for maintenance tasks; clearly see which elements to service.
• DURABLE DESIGN: Steel door stands up to traffic, while a splash-proof cap protects the system from overhead liquid exposure.

Vertex M PLC Upgrade Kit With PC

Pack (25) stoppers for unused sample ports on top manifold of Vertex

1290-0072 Vertex M Rack (110 VAC) with One (1) Universal Chemcassette Analyzer by Honeywell Analytics

Vertex M is the industry's most flexible, advanced toxic gas monitoring system offering parts per billion detection levels and physical evidence of a gas leak. Vertex M ensures productivity as well as life safety.

Flexible

The Vertex M System includes as standard one eight-point analyzer. As your monitoring needs change, Vertex M expands, offering you up to 24 points of continuous gas detection. Place your sampling points up to 400 feet (120 meters) from the system. There is a choice of universal analyzer modules and/or pyrolyzer analyzers. (Note: If Vertex M is used with one pyrolyzer module, the maximum number of points of detection is 16.)

Reliable

Vertex M offers powerful, built-in system redundancy as standard equipment to effectively safeguard against downtime.

• Back-up pump and internal power module
• Chemcassette® technology provides physical evidence of gas event
• System data back-up (if main data acquisition PC fails, analyzers continue to monitor, log data and alarm)
• Automated leak test with line integrity option

Easy to use

• Touch screen for easy access to data
• Software updates via CD-ROM or network to all system components
• Configuration profile editing and data retrieval are all achievable without taking unit offline
• Radio frequency identification tag (RFID) ensures Chemcassettes® are installed into appropriately programmed analyzer, eliminating human error
• On-line help system

Security

• Multiple levels of password protection
• Reconfigure security setup without taking unit offline

Low cost of ownership

• Vertex's M smaller footprint and greater density of points reduce your cost per point
• Eight points per analyzer lowers Chemcassette® costs
• Maximized 24 point systems provide low cost per point as compared to other continuous monitors
• One system monitors up to three gas families and more than 40 gases
• You can split your sample to more than one analyzer

Easy to maintain

• Vertex M uses cost-effective XP Chemcassettes®, providing up to three months of continuous monitoring
• Simplified replacement of Chemcassettes® and automated optics verification
• No dynamic calibration required
• One-touch flow balancing
• Easy access to analyzers, pumps, power supplies and touch screen from front panel
• Onscreen interactive electronic manual

Advanced communications

• Built-in configurable PLCs with optional 64 relay contacts non-isolated; 32 isolated
• Standard OPC interface for easy integration into your existing factory automation system or HMI
• Optional Ethernet/CIP, LONWORKS®, DeviceNetTM, DF1 Interface, PROFIBUS, Modbus Plus, Modbus/TCP, ControlNet or 4-20mA outputs available
• Optional Chemcam camera permits viewing of stain, locally or remotely, for proof of gas event. Image is electronically saved for future retrieval.
• Optional remote control/viewing software enables total visualization of the monitor screens at a remote PC

1290-0073 Vertex M Rack (110 VAC) with One (1) Pyrolyzer Analyzer by Honeywell Analytics

Vertex M is the industry's most flexible, advanced toxic gas monitoring system offering parts per billion detection levels and physical evidence of a gas leak. Vertex M ensures productivity as well as life safety.

Flexible

The Vertex M System includes as standard one eight-point analyzer. As your monitoring needs change, Vertex M expands, offering you up to 24 points of continuous gas detection. Place your sampling points up to 400 feet (120 meters) from the system. There is a choice of universal analyzer modules and/or pyrolyzer analyzers. (Note: If Vertex M is used with one pyrolyzer module, the maximum number of points of detection is 16.)

Reliable

Vertex M offers powerful, built-in system redundancy as standard equipment to effectively safeguard against downtime.

• Back-up pump and internal power module
• Chemcassette® technology provides physical evidence of gas event
• System data back-up (if main data acquisition PC fails, analyzers continue to monitor, log data and alarm)
• Automated leak test with line integrity option

Easy to use

• Touch screen for easy access to data
• Software updates via CD-ROM or network to all system components
• Configuration profile editing and data retrieval are all achievable without taking unit offline
• Radio frequency identification tag (RFID) ensures Chemcassettes® are installed into appropriately programmed analyzer, eliminating human error
• On-line help system

Security

• Multiple levels of password protection
• Reconfigure security setup without taking unit offline

Low cost of ownership

• Vertex's M smaller footprint and greater density of points reduce your cost per point
• Eight points per analyzer lowers Chemcassette® costs
• Maximized 24 point systems provide low cost per point as compared to other continuous monitors
• One system monitors up to three gas families and more than 40 gases
• You can split your sample to more than one analyzer

Easy to maintain

• Vertex M uses cost-effective XP Chemcassettes®, providing up to three months of continuous monitoring
• Simplified replacement of Chemcassettes® and automated optics verification
• No dynamic calibration required
• One-touch flow balancing
• Easy access to analyzers, pumps, power supplies and touch screen from front panel
• Onscreen interactive electronic manual

Advanced communications

• Built-in configurable PLCs with optional 64 relay contacts non-isolated; 32 isolated
• Standard OPC interface for easy integration into your existing factory automation system or HMI
• Optional Ethernet/CIP, LONWORKS®, DeviceNetTM, DF1 Interface, PROFIBUS, Modbus Plus, Modbus/TCP, ControlNet or 4-20mA outputs available
• Optional Chemcam camera permits viewing of stain, locally or remotely, for proof of gas event. Image is electronically saved for future retrieval.
• Optional remote control/viewing software enables total visualization of the monitor screens at a remote PC

1290-0074 Vertex M Rack (220 VAC) with One (1) Universal Chemcassette Analyzer by Honeywell Analytics

Vertex M is the industry's most flexible, advanced toxic gas monitoring system offering parts per billion detection levels and physical evidence of a gas leak. Vertex M ensures productivity as well as life safety.

Flexible

The Vertex M System includes as standard one eight-point analyzer. As your monitoring needs change, Vertex M expands, offering you up to 24 points of continuous gas detection. Place your sampling points up to 400 feet (120 meters) from the system. There is a choice of universal analyzer modules and/or pyrolyzer analyzers. (Note: If Vertex M is used with one pyrolyzer module, the maximum number of points of detection is 16.)

Reliable

Vertex M offers powerful, built-in system redundancy as standard equipment to effectively safeguard against downtime.

• Back-up pump and internal power module
• Chemcassette® technology provides physical evidence of gas event
• System data back-up (if main data acquisition PC fails, analyzers continue to monitor, log data and alarm)
• Automated leak test with line integrity option

Easy to use

• Touch screen for easy access to data
• Software updates via CD-ROM or network to all system components
• Configuration profile editing and data retrieval are all achievable without taking unit offline
• Radio frequency identification tag (RFID) ensures Chemcassettes® are installed into appropriately programmed analyzer, eliminating human error
• On-line help system

Security

• Multiple levels of password protection
• Reconfigure security setup without taking unit offline

Low cost of ownership

• Vertex's M smaller footprint and greater density of points reduce your cost per point
• Eight points per analyzer lowers Chemcassette® costs
• Maximized 24 point systems provide low cost per point as compared to other continuous monitors
• One system monitors up to three gas families and more than 40 gases
• You can split your sample to more than one analyzer

Easy to maintain

• Vertex M uses cost-effective XP Chemcassettes®, providing up to three months of continuous monitoring
• Simplified replacement of Chemcassettes® and automated optics verification
• No dynamic calibration required
• One-touch flow balancing
• Easy access to analyzers, pumps, power supplies and touch screen from front panel
• Onscreen interactive electronic manual

Advanced communications

• Built-in configurable PLCs with optional 64 relay contacts non-isolated; 32 isolated
• Standard OPC interface for easy integration into your existing factory automation system or HMI
• Optional Ethernet/CIP, LONWORKS®, DeviceNetTM, DF1 Interface, PROFIBUS, Modbus Plus, Modbus/TCP, ControlNet or 4-20mA outputs available
• Optional Chemcam camera permits viewing of stain, locally or remotely, for proof of gas event. Image is electronically saved for future retrieval.
• Optional remote control/viewing software enables total visualization of the monitor screens at a remote PC

1290-0075 Vertex M Rack (220 VAC) with One (1) Pyrolyzer Analyzer by Honeywell Analytics

Vertex M is the industry's most flexible, advanced toxic gas monitoring system offering parts per billion detection levels and physical evidence of a gas leak. Vertex M ensures productivity as well as life safety.

Flexible

The Vertex M System includes as standard one eight-point analyzer. As your monitoring needs change, Vertex M expands, offering you up to 24 points of continuous gas detection. Place your sampling points up to 400 feet (120 meters) from the system. There is a choice of universal analyzer modules and/or pyrolyzer analyzers. (Note: If Vertex M is used with one pyrolyzer module, the maximum number of points of detection is 16.)

Reliable

Vertex M offers powerful, built-in system redundancy as standard equipment to effectively safeguard against downtime.

• Back-up pump and internal power module
• Chemcassette® technology provides physical evidence of gas event
• System data back-up (if main data acquisition PC fails, analyzers continue to monitor, log data and alarm)
• Automated leak test with line integrity option

Easy to use

• Touch screen for easy access to data
• Software updates via CD-ROM or network to all system components
• Configuration profile editing and data retrieval are all achievable without taking unit offline
• Radio frequency identification tag (RFID) ensures Chemcassettes® are installed into appropriately programmed analyzer, eliminating human error
• On-line help system

Security

• Multiple levels of password protection
• Reconfigure security setup without taking unit offline

Low cost of ownership

• Vertex's M smaller footprint and greater density of points reduce your cost per point
• Eight points per analyzer lowers Chemcassette® costs
• Maximized 24 point systems provide low cost per point as compared to other continuous monitors
• One system monitors up to three gas families and more than 40 gases
• You can split your sample to more than one analyzer

Easy to maintain

• Vertex M uses cost-effective XP Chemcassettes®, providing up to three months of continuous monitoring
• Simplified replacement of Chemcassettes® and automated optics verification
• No dynamic calibration required
• One-touch flow balancing
• Easy access to analyzers, pumps, power supplies and touch screen from front panel
• Onscreen interactive electronic manual

Advanced communications

• Built-in configurable PLCs with optional 64 relay contacts non-isolated; 32 isolated
• Standard OPC interface for easy integration into your existing factory automation system or HMI
• Optional Ethernet/CIP, LONWORKS®, DeviceNetTM, DF1 Interface, PROFIBUS, Modbus Plus, Modbus/TCP, ControlNet or 4-20mA outputs available
• Optional Chemcam camera permits viewing of stain, locally or remotely, for proof of gas event. Image is electronically saved for future retrieval.
• Optional remote control/viewing software enables total visualization of the monitor screens at a remote PC

KIT,RADIO INTRF PTT MIC,Vertex VX-924

Honeywell Analytics Duct Adapter for 1/4" O.D. Tubing for 4-16" Round Ducts (Vertex and CM4)

Tubing, FEP Teflon 0.190" (3/16") I.D. x 0.250" (1/4") O.D -- 400 ft roll (121m) Standard Tubing for CM4 samples lines. Consult the transport time chart in the Vertex Technical Handbook for additional information