Umbrella

Part Number: GAMAXIU

6772 Work Umbrella 72" Diameter Wood Post, Yellow PVC Top by Pelsue

Pelsue's 72" diameter yellow work umbrella was designed for an even quicker setup and breakdown for when the need arises. This umbrella is a universal style work umbrella with sturdy PVC fabric (yellow) and a wooden mast.

6759 Umbrella, 59" X 59", Blackout Shade Material and V-Cup Mount by Pelsue

The Pelsue Floating Umbrella is designed as a portable shelter for situations where traditional work umbrellas aren't practical. This new umbrella design requires only a smooth clean surface for setup, making it perfect for tight spaces such as those found around Charles cabinets (like those commonly housing telecommunications equipment and other utilities). Thanks to the design of the suction cups it's also possible to attach the umbrella to surfaces that aren't perfectly flat, such as the side of work vehicles and trucks.If you are looking for shade or protection from inclement weather the Floating Umbrella has you covered. Coverage on the with the Floating Umbrella is about 50% greater than the Floating Tent, making it ideal for providing shade. Please note that the umbrella support structure is the same as that sold with the floating tent. You can easily switch out the top you are using should weather conditions change. The suction cups used here are pump operated for a strong hold, our current record is 6 hours on a smooth clean surface.

If you are worried about protection from more severe weather, consider Pelsue's Floating Tent. With 60' roll down sides it's capable of providing 360 degrees of protection.

Why suction cups and not magnets?

Suction cups let the umbrella work on almost any smooth surface, magnets require that the surface is magnetic (generally made of metal). Even with powerful magnets such as those made from neodymium, the surface may not be strongly attract the magnet. Magnets that aren't sufficiently powerful may also slide on the surface increasing the risk of injury. Powerful magnets are also dangerous in their own right. They may crush or pinch the unprepared if they are attracted to a surface. Suction cups are less prone to sliding and spinning, and can't practically cause crushing injuries.

Floating Tent Features

• Adjustable support with three joints to insure versatility in any location. Includes two hinge joints (base can be rotated in two axes), and a ball joint at the top.
• Water/Fire/UV resistant fabric for all portions of the tent.
• Non-Rusting and Rust resistant components for support structure.
• Dual Pump operated suction cups, with hold indicator on pump.
• Carrying case.

6742 Floating Tent, 42" X 42" with 60" Drop Down Walls by Pelsue

The Pelsue Floating Tent is designed as a portable shelter for situations where traditional tents aren't practical. This new tent design requires only a smooth clean surface for setup, making it perfect for tight spaces such as those found around Charles cabinets (like those commonly housing telecommunications equipment). If you are looking for shade or protection from inclement weather the Floating Tent has you covered. Thanks to the design of the suction cups it's also possible to attach the umbrella to surfaces that aren't perfectly flat, such as the side of work vehicles and trucks. With roll up sides it functions as both an umbrella and a four sided tent depending on your needs. Like all Pelsue Tent products, the tent material is Fire/UV/Water resistant and made in America. The suction cups used here are pump operated for a strong hold, our current record is 6 hours on a smooth clean surface.

Floating Tent Features

• Adjustable support with three joints to insure versatility in any location. Includes two hinge joints (base can be rotated in two axes), and a ball joint at the top.
• Four Roll down sides, can be set at 60", 30", or completely rolled up.
• Zippers at each corner for entry and exit.
• Velcro Clasps to hold each side up when not in use.
• Water/Fire/UV resistant fabric for all portions of the tent.
• Rope for tying off all four corners with pockets for storage.
• Non-Rusting and Rust resistant components for support structure.
• Dual Pump operated suction cups, with hold indicator on pump.
• Mesh carrying case.

LG5A 5000 lb. Lifeguard System - Heavy Duty with Leveling Feet by Pelsue

Pelsue's Lifeguard Systems function as 3 in 1 Confined Space entry systems. These systems act as an OSHA compliant barrier for the confined space, fall protection anchorage, and rescue and retrieval system. Designed for easy breakdown and setup, the Lifeguard won't impact your efficiency and will help insure a safe working environment. Made with durable aluminum and steel the unit will last for years with proper care. These systems are capable of supporting a hoist, winch, Self Retracting Lifeline (SRL), 3-way unit or a combination of devices to best suit your application.

Compliant with standards such as OSHA 1910.146, OSHA 1926, ANSI A10.14, and ANSI Z117.1.

3-IN-1 Confined Space Barrier, Fall Arrest and Retrieval System (With appropriate SRL/3 Way Lifeline or Hoist)

• Barricade (OSHA requires open manholes must be barricaded)
• Overhead 5000lbs load lets this system qualify as a Fall Arrest System
• Able to lift 350 lbs* making it a practical retrieval system

Features:

• Portable Two Piece Unit for Easy Set-Up
• One Person setup - the upper assembly will support itself with only one attached to the lower assembly.
• Dual Anchor Points
• Complaint with Fall Arrest Standards (OSHA 1926 & ANSI A10.14), and Confined Space Entry Standards (OSHA 1910.146 & ANSI Z117.1.)
• Usable with a Hoist, Winch, SRL, 3-way or a combination of devices to be suit your application

Capacity and Compliance Specifications:

• Man Rated Load Capacity: 350 lbs.*
• Overhead Proof Load: 5000 lbs.
• System complies with OSHA safety standards when used by a competent individual.

Materials:

• Upper Assembly: Structural Grade Aluminum & Steel
• Guard Assembly: Structural Grade Aluminum
• Winch Mount: 5052-H32 Aluminum
• Hardware: Grade 5 Steel

LG5A System Includes:

• 1 ea. Upper Assembly
• 1 ea. Guard Assembly
• Set of 4 ea. Rubber Feet (shipped loose)
• 1 ea. winch bracket & mounting plate for use with standard retrieval winch.
• 1 ea. Pulley assembly with auto-lock carabiner.
• Set of flexible draw latches to anchor the assembly to the guard assembly.

Suggested winches (not included):

• PH07C
• PH07R

Suggested accessories (not included):

• LGL-B, Secondary winch bracket
• PA01, Secondary winch pulley

This is an umbrella term by which we mean:

• The device or system is tested to insure compliance with OSHA Safety Standards for confined space rescue and retrieval or fall arrest for personnel.
• The device or system is intended to be used for confined space rescue and retrieval or fall arrest by a worker who is trained as a "competent person" and/or "qualified" per OSHA Safety Standards.

LG5X 5000 lb. Lifeguard System - Heavy Duty with Leveling Feet - Large 48"x48" by Pelsue

Pelsue's Lifeguard Systems function as 3 in 1 Confined Space entry systems. These systems act as an OSHA compliant barrier for the confined space, fall protection anchorage, and rescue and retrieval system. Designed for easy breakdown and setup, the Lifeguard won't impact your efficiency and will help insure a safe working environment. Made with durable aluminum and steel the unit will last for years with proper care. These systems are capable of supporting a hoist, winch, Self Retracting Lifeline (SRL), 3-way unit or a combination of devices to best suit your application.

Compliant with standards such as OSHA 1910.146, OSHA 1926, ANSI A10.14, and ANSI Z117.1.

3-IN-1 Confined Space Barrier, Fall Arrest and Retrieval System (With appropriate SRL/3 Way Lifeline or Hoist)

• Barricade (OSHA requires open manholes must be barricaded)
• Overhead 5000lbs load lets this system qualify as a Fall Arrest System
• Able to lift 350 lbs* making it a practical retrieval system

Features:

• Portable Two Piece Unit for Easy Set-Up
• One Person setup - the upper assembly will support itself with only one attached to the lower assembly.
• Dual Anchor Points
• Complaint with Fall Arrest Standards (OSHA 1926 & ANSI A10.14), and Confined Space Entry Standards (OSHA 1910.146 & ANSI Z117.1.)
• Usable with a Hoist, Winch, SRL, 3-way or a combination of devices to be suit your application

Capacity and Compliance Specifications:

• Man Rated Load Capacity: 350 lbs.*
• Overhead Proof Load: 5000 lbs.
• System complies with OSHA safety standards when used by a competent individual.

Materials:

• Upper Assembly: Structural Grade Aluminum & Steel
• Guard Assembly: Structural Grade Aluminum
• Winch Mount: 5052-H32 Aluminum
• Hardware: Grade 5 Steel

Suggested winches (not included):

• PH07C
• PH07R

Suggested accessories (not included):

• LGL-B, Secondary winch bracket
• PA01, Secondary winch pulley

This is an umbrella term by which we mean:

• The device or system is tested to insure compliance with OSHA Safety Standards for confined space rescue and retrieval or fall arrest for personnel.
• The device or system is intended to be used for confined space rescue and retrieval or fall arrest by a worker who is trained as a "competent person" and/or "qualified" per OSHA Safety Standards.