Sodium Meter

SCT-108.003.16 SCT BEN-SOD-1 Benchtop Sodium Ion Meter by ScichemTech

SCT benchtop sodium ion meter is suitable for measuring low sodium ion concentration in the water.

Includes:

• Flexible electrode holder
• Intelligent stirrer
• Stir bead
• Sodium ion electrode
• Reference electrode
• Temperature electrode
• pNA 1.00 standard solution
• 10^-1 mol/l CSCL reference solution
• 9V power adapter
• 16V power adapter
• AA battery
• RS-232 communication cable
• Communication software CD
• Operation manual
• Packing list

Features:

• SCT meter meets with the requirement of international GLP standards. Its features up to automatic calibration, automatic temperature compensation, data storage, timing measurement, clock display, RS-232 output, function setting and self-diagnose Etc.
• Three different measurement modes: stable display mode; time measurement mode; continuous measurement mode.
• Sodium electrode range.
• Sodium ion electrode, reference electrode and temperature electrode.
• Can switch 4 kinds of concentration unit: px, mol/l, mg/l and ppm
• Each meter is coded with unique serial number.
• Dustproof and waterproof meter meets IP54 standards. All sockets are seal protected by the silica gel caps.
• SCT benchtop meter meets : ISO9001 & CE standards.

LB03SA-VVC9-XXX PULSAtron Series A Plus Metering Pump, PVC Degassing for Sodium Hypo & Off Gassing Chemicals, 12 GPD @ 150 PSI (KOPkit # K3VVC9) by Quantrol

The Pulsatron Series A Plus offers manual function controls over stroke length and stroke rate as standard with the option to select external pace for automatic control.

Ten distinct models are available, having pressure capabilities to 250 PSIG (17 BAR) @ 12 GPD (1.9 lph), and flow capacities to 58 GPD (9.1 lph) @ 100 PSIG (7.0 BAR), with a standard turndown ratio of 100:1, and optional ratio of 1000:1. Metering performance is reproducible to within ± 3% of maximum capacity.

Features

• Manual Control by on-line adjustable stroke rate and stroke length.
• Highly Reliable timing circuit.
• Circuit Protection against voltage and current upsets.
• Solenoid Protection by thermal overload with auto-reset.
• Water Resistant, for outdoor and indoor applications.
• Internally Dampened To Reduce Noise.
• Guided Ball Check Valve Systems, to reduce back flow and enhance outstanding priming characteristics.
• Few Moving Parts and Wall Mountable.
• Safe & Easy Priming with durable leak-free bleed valve assembly (standard).
• Optional Control: External pace with auto/manual selection.

Operating Benefits

• Reliable metering performance.
• Rated "hot" for continuous duty.
• High viscosity capability.
• Leak-free, sealless, liquid end.

LB04SA-VVC9-XXX PULSAtron Series A Plus Metering Pump, PVC Degassing for Sodium Hypo & Off Gassing Chemicals, 24 GPD @ 100 PSI (KOPkit # K4VVC9) by Quantrol

The Pulsatron Series A Plus offers manual function controls over stroke length and stroke rate as standard with the option to select external pace for automatic control.

Ten distinct models are available, having pressure capabilities to 250 PSIG (17 BAR) @ 12 GPD (1.9 lph), and flow capacities to 58 GPD (9.1 lph) @ 100 PSIG (7.0 BAR), with a standard turndown ratio of 100:1, and optional ratio of 1000:1. Metering performance is reproducible to within ± 3% of maximum capacity.

Features

• Manual Control by on-line adjustable stroke rate and stroke length.
• Highly Reliable timing circuit.
• Circuit Protection against voltage and current upsets.
• Solenoid Protection by thermal overload with auto-reset.
• Water Resistant, for outdoor and indoor applications.
• Internally Dampened To Reduce Noise.
• Guided Ball Check Valve Systems, to reduce back flow and enhance outstanding priming characteristics.
• Few Moving Parts and Wall Mountable.
• Safe & Easy Priming with durable leak-free bleed valve assembly (standard).
• Optional Control: External pace with auto/manual selection.

Operating Benefits

• Reliable metering performance.
• Rated "hot" for continuous duty.
• High viscosity capability.
• Leak-free, sealless, liquid end.

LB64SA-VVC9-XXX PULSAtron Series A Plus Metering Pump, PVC Degassing for Sodium Hypo & Off Gassing Chemicals, 30 GPD @ 100 PSI (KOPkit # K4VVC9) by Quantrol

The Pulsatron Series A Plus offers manual function controls over stroke length and stroke rate as standard with the option to select external pace for automatic control.

Ten distinct models are available, having pressure capabilities to 250 PSIG (17 BAR) @ 12 GPD (1.9 lph), and flow capacities to 58 GPD (9.1 lph) @ 100 PSIG (7.0 BAR), with a standard turndown ratio of 100:1, and optional ratio of 1000:1. Metering performance is reproducible to within ± 3% of maximum capacity.

Features

• Manual Control by on-line adjustable stroke rate and stroke length.
• Highly Reliable timing circuit.
• Circuit Protection against voltage and current upsets.
• Solenoid Protection by thermal overload with auto-reset.
• Water Resistant, for outdoor and indoor applications.
• Internally Dampened To Reduce Noise.
• Guided Ball Check Valve Systems, to reduce back flow and enhance outstanding priming characteristics.
• Few Moving Parts and Wall Mountable.
• Safe & Easy Priming with durable leak-free bleed valve assembly (standard).
• Optional Control: External pace with auto/manual selection.

Operating Benefits

• Reliable metering performance.
• Rated "hot" for continuous duty.
• High viscosity capability.
• Leak-free, sealless, liquid end.

LC03SA-VVC9-XXX PULSAtron Series C Metering Pump, PVC Degassing for Sodium Hypo & Off Gassing Chemicals, 12 GPD @ 80 PSI (KOPkit # K3VVC9) by Quantrol

The Pulsatron Series C offers manual online stroke length adjustment with fixed stroke rate. Optional control features include external pace a choice between momentary on/off switch for priming the pump or a toggle on/off switch for manual override of all control functions.

Four distinct models are available, having pressure capabilities of 80 PSIG (5.6 BAR), and flow capacities up to 30 GPD (4.7 lph), with a turndown ratio of 10:1. Metering performance is reproducible to within ± 3% of maximum capacity.

Features

• Manual Control by on-line adjustable stroke length (fixed stroke rate).
• Liquid Low Level Option available to prevent loss of prime.
• Highly Reliable timing circuit.
• Circuit Protection against voltage and current upsets.
• Solenoid Protection by thermal overload with autoreset.
• Water Resistant, for outdoor and indoor applications.
• Internally Dampened To Reduce Noise.
• Guided Ball Check Valve Systems, to reduce back flow and enhance outstanding priming characteristics.
• Few Moving Parts and Wall Mountable.
• Safe & Easy Priming with durable leak-free bleed valve assembly (standard).
• Automatic Control by external pacing with prime switch (optional).

Operating Benefits

• Reliable metering performance.
• Rated "hot" for continuous duty.
• High viscosity capability.
• Leak-free, sealless, liquid end.

LC04SA-VVC9-XXX PULSAtron Series C Metering Pump, PVC Degassing for Sodium Hypo & Off Gassing Chemicals, 24 GPD @ 80 PSI (KOPkit # K4VVC9) by Quantrol

The Pulsatron Series C offers manual online stroke length adjustment with fixed stroke rate. Optional control features include external pace a choice between momentary on/off switch for priming the pump or a toggle on/off switch for manual override of all control functions.

Four distinct models are available, having pressure capabilities of 80 PSIG (5.6 BAR), and flow capacities up to 30 GPD (4.7 lph), with a turndown ratio of 10:1. Metering performance is reproducible to within ± 3% of maximum capacity.

Features

• Manual Control by on-line adjustable stroke length (fixed stroke rate).
• Liquid Low Level Option available to prevent loss of prime.
• Highly Reliable timing circuit.
• Circuit Protection against voltage and current upsets.
• Solenoid Protection by thermal overload with autoreset.
• Water Resistant, for outdoor and indoor applications.
• Internally Dampened To Reduce Noise.
• Guided Ball Check Valve Systems, to reduce back flow and enhance outstanding priming characteristics.
• Few Moving Parts and Wall Mountable.
• Safe & Easy Priming with durable leak-free bleed valve assembly (standard).
• Automatic Control by external pacing with prime switch (optional).

Operating Benefits

• Reliable metering performance.
• Rated "hot" for continuous duty.
• High viscosity capability.
• Leak-free, sealless, liquid end.

LC54SA-VVC9-XXX PULSAtron Series C Metering Pump, PVC Degassing for Sodium Hypo & Off Gassing Chemicals, 30 GPD @ 80 PSI (KOPkit # K4VVC9) by Quantrol

The Pulsatron Series C offers manual online stroke length adjustment with fixed stroke rate. Optional control features include external pace a choice between momentary on/off switch for priming the pump or a toggle on/off switch for manual override of all control functions.

Four distinct models are available, having pressure capabilities of 80 PSIG (5.6 BAR), and flow capacities up to 30 GPD (4.7 lph), with a turndown ratio of 10:1. Metering performance is reproducible to within ± 3% of maximum capacity.

Features

• Manual Control by on-line adjustable stroke length (fixed stroke rate).
• Liquid Low Level Option available to prevent loss of prime.
• Highly Reliable timing circuit.
• Circuit Protection against voltage and current upsets.
• Solenoid Protection by thermal overload with autoreset.
• Water Resistant, for outdoor and indoor applications.
• Internally Dampened To Reduce Noise.
• Guided Ball Check Valve Systems, to reduce back flow and enhance outstanding priming characteristics.
• Few Moving Parts and Wall Mountable.
• Safe & Easy Priming with durable leak-free bleed valve assembly (standard).
• Automatic Control by external pacing with prime switch (optional).

Operating Benefits

• Reliable metering performance.
• Rated "hot" for continuous duty.
• High viscosity capability.
• Leak-free, sealless, liquid end.

LD03SA-VVC9-XXX PULSAtron Series C Plus Metering Pump, PVC Degassing for Sodium Hypo & Off Gassing Chemicals, 12 GPD @ 80 PSI (KOPkit # K3VVC9) by Quantrol

The Pulsatron Series C Plus offers manual function control over stroke length and stroke rate as standard with the option to select external pace for automatic control. The primary difference between the Series A Plus and Series C Plus is the pressure rating.

Four distinct models are available, having pressure capabilities of 80 PSIG (5.6 BAR), and flow capacities up to 30 GPD (4.7 lph), with a turndown ratio of 100:1. Metering performance is reproducible to within ± 3% of maximum capacity.

Features

• Manual Control by on-line adjustable stroke rate and stroke length.
• Highly Reliable timing circuit.
• Circuit Protection against voltage and current upsets.
• Solenoid Protection by thermal overload with autoreset.
• Water Resistant, for outdoor and indoor applications.
• Internally Dampened To Reduce Noise.
• Guided Ball Check Valve Systems, to reduce back flow and enhance outstanding priming characteristics.
• Few Moving Parts and Wall Mountable.
• Safe & Easy Priming with durable leak-free bleed valve assembly (standard).
• Optional Control: External pace with auto/manual selection.

Operating Benefits

• Reliable metering performance.
• Rated "hot" for continuous duty.
• High viscosity capability.
• Leak-free, sealless, liquid end.

LD04SA-VVC9-XXX PULSAtron Series C Plus Metering Pump, PVC Degassing for Sodium Hypo & Off Gassing Chemicals, 24 GPD @ 80 PSI (KOPkit # K4VVC9) by Quantrol

The Pulsatron Series C Plus offers manual function control over stroke length and stroke rate as standard with the option to select external pace for automatic control. The primary difference between the Series A Plus and Series C Plus is the pressure rating.

Four distinct models are available, having pressure capabilities of 80 PSIG (5.6 BAR), and flow capacities up to 30 GPD (4.7 lph), with a turndown ratio of 100:1. Metering performance is reproducible to within ± 3% of maximum capacity.

Features

• Manual Control by on-line adjustable stroke rate and stroke length.
• Highly Reliable timing circuit.
• Circuit Protection against voltage and current upsets.
• Solenoid Protection by thermal overload with autoreset.
• Water Resistant, for outdoor and indoor applications.
• Internally Dampened To Reduce Noise.
• Guided Ball Check Valve Systems, to reduce back flow and enhance outstanding priming characteristics.
• Few Moving Parts and Wall Mountable.
• Safe & Easy Priming with durable leak-free bleed valve assembly (standard).
• Optional Control: External pace with auto/manual selection.

Operating Benefits

• Reliable metering performance.
• Rated "hot" for continuous duty.
• High viscosity capability.
• Leak-free, sealless, liquid end.

LD54SA-VVC9-XXX PULSAtron Series C Plus Metering Pump, PVC Degassing for Sodium Hypo & Off Gassing Chemicals, 30 GPD @ 80 PSI (KOPkit # K4VVC9) by Quantrol

The Pulsatron Series C Plus offers manual function control over stroke length and stroke rate as standard with the option to select external pace for automatic control. The primary difference between the Series A Plus and Series C Plus is the pressure rating.

Four distinct models are available, having pressure capabilities of 80 PSIG (5.6 BAR), and flow capacities up to 30 GPD (4.7 lph), with a turndown ratio of 100:1. Metering performance is reproducible to within ± 3% of maximum capacity.

Features

• Manual Control by on-line adjustable stroke rate and stroke length.
• Highly Reliable timing circuit.
• Circuit Protection against voltage and current upsets.
• Solenoid Protection by thermal overload with autoreset.
• Water Resistant, for outdoor and indoor applications.
• Internally Dampened To Reduce Noise.
• Guided Ball Check Valve Systems, to reduce back flow and enhance outstanding priming characteristics.
• Few Moving Parts and Wall Mountable.
• Safe & Easy Priming with durable leak-free bleed valve assembly (standard).
• Optional Control: External pace with auto/manual selection.

Operating Benefits

• Reliable metering performance.
• Rated "hot" for continuous duty.
• High viscosity capability.
• Leak-free, sealless, liquid end.

TPG500NHH1U00U Seko Tekna Series Solenoid Driven Metering Pump, TPG Digital Series PVDF/EPDM for Sodium Hydroxide, 5 GPD @ 232PSI by Quantrol

SEKO Tekna Series Pump Features

• 5 Models cover an output range of 0.1-29 GPH with pressure ratings up to 290 PSI.
• Turndown ratio 100:1 using the manual stroke rate control.
• Installation flexibility with both wall mount and surface mount brackets included.
• Wet end constructed of PVDF Head, PVDF Fittings, Ceramic Balls, FPM Seats and a long life, 1 piece, molded PTFE diaphragm.
• Pump head incorporates an integral manual priming valve.
• Automatic degassing wet end available with PVDF Head & Fittings, Ceramic ball checks, FPM seats and molded Teflon Diaphragm.
• Installation kit included with Foot Valve/Strainer, Injection/Back Pressure Valve, 3/8" PVC Suction and Polyethylene Discharge tubing.
• Liquid End, User Interface and Wiring are all on the same end of the pump to simplify installation, operation, and maintenance.
• Chemical resistant, glass reinforced polypropylene enclosure is IP65 and NEMA 4x rated.
• Auto ranging power supply. 100-240VAC, 50/60Hz.
• Dry contact low level input with alarm LED.

TPR Digital Series

• Built in pH or ORP control
• Proportional control, overfeed and alarm setting
• Alarm dry contact output
• Alarm and stroke LED indicators
• Remote Start/Stop input
• 4-20mA output

TPG603NHH1U00U Seko Tekna Series Solenoid Driven Metering Pump, TPG Digital Series PVDF/EPDM for Sodium Hydroxide, 25 GPD @ 174PSI by Quantrol

SEKO Tekna Series Pump Features

• 5 Models cover an output range of 0.1-29 GPH with pressure ratings up to 290 PSI.
• Turndown ratio 100:1 using the manual stroke rate control.
• Installation flexibility with both wall mount and surface mount brackets included.
• Wet end constructed of PVDF Head, PVDF Fittings, Ceramic Balls, FPM Seats and a long life, 1 piece, molded PTFE diaphragm.
• Pump head incorporates an integral manual priming valve.
• Automatic degassing wet end available with PVDF Head & Fittings, Ceramic ball checks, FPM seats and molded Teflon Diaphragm.
• Installation kit included with Foot Valve/Strainer, Injection/Back Pressure Valve, 3/8" PVC Suction and Polyethylene Discharge tubing.
• Liquid End, User Interface and Wiring are all on the same end of the pump to simplify installation, operation, and maintenance.
• Chemical resistant, glass reinforced polypropylene enclosure is IP65 and NEMA 4x rated.
• Auto ranging power supply. 100-240VAC, 50/60Hz.
• Dry contact low level input with alarm LED.

TPR Digital Series

• Built in pH or ORP control
• Proportional control, overfeed and alarm setting
• Alarm dry contact output
• Alarm and stroke LED indicators
• Remote Start/Stop input
• 4-20mA output

TPG800NHH1U00U Seko Tekna Series Solenoid Driven Metering Pump, TPG Digital Series PVDF/EPDM for Sodium Hydroxide, 44 GPD @ 232PSI by Quantrol

SEKO Tekna Series Pump Features

• 5 Models cover an output range of 0.1-29 GPH with pressure ratings up to 290 PSI.
• Turndown ratio 100:1 using the manual stroke rate control.
• Installation flexibility with both wall mount and surface mount brackets included.
• Wet end constructed of PVDF Head, PVDF Fittings, Ceramic Balls, FPM Seats and a long life, 1 piece, molded PTFE diaphragm.
• Pump head incorporates an integral manual priming valve.
• Automatic degassing wet end available with PVDF Head & Fittings, Ceramic ball checks, FPM seats and molded Teflon Diaphragm.
• Installation kit included with Foot Valve/Strainer, Injection/Back Pressure Valve, 3/8" PVC Suction and Polyethylene Discharge tubing.
• Liquid End, User Interface and Wiring are all on the same end of the pump to simplify installation, operation, and maintenance.
• Chemical resistant, glass reinforced polypropylene enclosure is IP65 and NEMA 4x rated.
• Auto ranging power supply. 100-240VAC, 50/60Hz.
• Dry contact low level input with alarm LED.

TPR Digital Series

• Built in pH or ORP control
• Proportional control, overfeed and alarm setting
• Alarm dry contact output
• Alarm and stroke LED indicators
• Remote Start/Stop input
• 4-20mA output

TPG803NHH1U00U Seko Tekna Series Solenoid Driven Metering Pump, TPG Digital Series PVDF/EPDM for Sodium Hydroxide, 127 GPD @ 72PSI by Quantrol

SEKO Tekna Series Pump Features

• 5 Models cover an output range of 0.1-29 GPH with pressure ratings up to 290 PSI.
• Turndown ratio 100:1 using the manual stroke rate control.
• Installation flexibility with both wall mount and surface mount brackets included.
• Wet end constructed of PVDF Head, PVDF Fittings, Ceramic Balls, FPM Seats and a long life, 1 piece, molded PTFE diaphragm.
• Pump head incorporates an integral manual priming valve.
• Automatic degassing wet end available with PVDF Head & Fittings, Ceramic ball checks, FPM seats and molded Teflon Diaphragm.
• Installation kit included with Foot Valve/Strainer, Injection/Back Pressure Valve, 3/8" PVC Suction and Polyethylene Discharge tubing.
• Liquid End, User Interface and Wiring are all on the same end of the pump to simplify installation, operation, and maintenance.
• Chemical resistant, glass reinforced polypropylene enclosure is IP65 and NEMA 4x rated.
• Auto ranging power supply. 100-240VAC, 50/60Hz.
• Dry contact low level input with alarm LED.

TPR Digital Series

• Built in pH or ORP control
• Proportional control, overfeed and alarm setting
• Alarm dry contact output
• Alarm and stroke LED indicators
• Remote Start/Stop input
• 4-20mA output

WD-35802-43 Sodium Na+ Double-junction Ion-Selective Electrode (ISE) by Oakton

Double junction makes these electrodes ideal even for rugged applications

Use these economical Ion Selective Electrodes (ISEs) with the ION 510 meter, pH 2500 Ion benchtop meter, or the Ion Acorn meters. They also are suitable for use with any other ion meter, or with any meter with 0.1 mV resolution. All ISEs feature a BNC connector and 3-ft cable.

ISE solution kits contain the solutions and accessories needed for calibration, sample preparation and measurement of ion concentration and activity. All solutions are supplied with MSDS (Material Safety Data Sheet) and have a value of 1000 ppm.

• Each features a BNC connector and 3-ft cable

WD-35812-42 Sodium Na+ Double-junction Ion-Selective Electrode (ISE) by Oakton

Double junction makes these electrodes ideal even for rugged applications

Use these economical Ion Selective Electrodes (ISEs) with the ION 510 meter, pH 2500 Ion benchtop meter, or the Ion Acorn meters. They also are suitable for use with any other ion meter, or with any meter with 0.1 mV resolution. All ISEs feature a BNC connector and 3-ft cable.

ISE solution kits contain the solutions and accessories needed for calibration, sample preparation and measurement of ion concentration and activity. All solutions are supplied with MSDS (Material Safety Data Sheet) and have a value of 1000 ppm.

• Each features a BNC connector and 3-ft cable

WD-27504-30 Cole-Parmer® Combination Ion-Selective Electrode (ISE), Sodium (Na+) by Oakton

Whether your application involves end point determinations in potentiometric titrations or continuous monitoring of specific ions, we can help you find the right electrode for the job. These fast and accurate electrodes do not require an external reference - they're easier to use than separate sensing and reference half-cell electrodes. All Cole-Parmer electrodes are double-junction combination ion-selective electrodes and are convenient to use in places where two electrodes won't fit. All electrodes include a 30-mL bottle of reference solution, a reference filling pipette, 1-m cable, BNC connector, and an instruction manual. Solid-state electrodes also have twelve polishing strips.

Economy Epoxy Electrodes have a durable epoxy body and are well-suited for portable field applications. Outer reference chamber is silver-free and resists contamination. These electrodes are refillable.

Laboratory Glass Electrodes are double-junction in design, with a glass body that provides high-quality measurements for your laboratory applications. Improved glass seal enhances performance and reliability. Sealed inner junctions and refillable outer junctions accommodate special reference fill solutions - ideal for low-concentration measurements. Use electrodes with a meter that has a resolution of 0.1 mV for the most accurate results. Many meters in our "pH/Ion Meters" section have 0.1 mV resolution; several also give direct readings in ppm. For monitoring ions not listed below, call our Application Specialists for more electrode application information.

• Cost-effective choices that are easy to use
• Easily fit into small spaces - no additional reference electrode is needed
• Sodium (Na⁺) ISE with epoxy body

WD-20250-00 Data Logging Light Meter with NIST Traceable Calibration by Digi-Sense

Designed for precision light intensity measurements indoors and out. Ensures safety and quality control requirements are met while increasing comfort levels and productivity. View measurement data in graphical formats as well as record and download data with included software for further analysis.

Features

• Reliable measurements, guaranteed! Precalibrated to NIST-traceable standards.
• Expanded range of 0 to 400 kLux/0 to 40 kFc meets a wide range of application requirements
• Silicon photo diode with spectral response filter ensures precision accuracy of ±3%
• User-selectable Lux or Fc units for additional flexibility
• Max/Min and Hold functions let you easily control measurement readings
• Record up to 87,000 measurements for expanded data analysis capability
• Data logging software with graphical display provides quick and simple data interpretation
• USB connectivity allows downloading of data to PC
• Large backlit LCD for easy reading in dimly lit environments
• Auto power-off extends battery life

Applications

• Measure visible light from fluorescent, metal halide, high pressure sodium, or incandescent sources
• Monitor light levels for safe working conditions in factories, warehouses, office buildings, and schools
• Light source manufacturers: light intensity in R&D, design, production, QA/QC, installation, and field verification
• Perform outdoor commercial and residential lighting evaluations
• Measure roadway/sign/search lighting to ensure code compliance
• Light intensity control for photo studios, scenic design and cinematography

Includes

USB cable, software CD, canvas carrying case, three AAA batteries, and NIST-traceable certificate with data and uncertainties

WD-27502-43 Cole-Parmer® Ion-Selective Electrode (ISE), Sodium, Double-Junction, BNC by Oakton

Whether your application involves end point determinations in potentiometric titrations or continuous monitoring of specific ions, we can help you find the right electrode for the job. These fast and accurate electrodes do not require an external reference - they're easier to use than separate sensing and reference half-cell electrodes. All Cole-Parmer electrodes are double-junction combination ion-selective electrodes and are convenient to use in places where two electrodes won't fit. All electrodes include a 30-mL bottle of reference solution, a reference filling pipette, 1-m cable, BNC connector, and an instruction manual. Solid-state electrodes also have twelve polishing strips.

Economy Epoxy Electrodes have a durable epoxy body and are well-suited for portable field applications. Outer reference chamber is silver-free and resists contamination. These electrodes are refillable.

Laboratory Glass Electrodes are double-junction in design, with a glass body that provides high-quality measurements for your laboratory applications. Improved glass seal enhances performance and reliability. Sealed inner junctions and refillable outer junctions accommodate special reference fill solutions - ideal for low-concentration measurements. Use electrodes with a meter that has a resolution of 0.1 mV for the most accurate results. Many meters in our "pH/Ion Meters" section have 0.1 mV resolution; several also give direct readings in ppm. For monitoring ions not listed below, call our Application Specialists for more electrode application information.

• Cost-effective choices that are easy to use
• Easily fit into small spaces - no additional reference electrode is needed
• Sodium (Na⁺) ISE with glass body

WD-05991-36 All-in-One pH/ATC Probe, Refillable/DJ/Glass by Oakton

These glass 'All-in-one' pH/temperature electrodes offer more reliable and stable reading than epoxy versions. Amber glass bulb for low sodium error even in solutions with a pH greater than 12. Double-junction design assures longer life even with dirty or troublesome samples such as TRIS buffer or wastewater. A 2.5 mm mini audio plug combined with a thermistor for automatic temperature compensation input to your Oakton pH meter. Compatible with the following Oakton meters: handheld pH/Ion 5, 6, 11, 110 and benchtop 510, 700, 1100, 2100, and 2700.

Use these electrodes with most Oakton handheld or benchtop pH meters for accurate and reliable readings

• Refillable electrode provides more accurate pH measurement
• Amber glass bulb minimizes sodium error in high pH solutions
• Use at temperatures up 110°C

INCLUDES

1-m cable with BNC pH connection and 2.5 mm mini audio plug ATC connection

TDS1000 Conductivity Solution, 1000ppm/1417uS, 1Qt by Sensorex

TDS/Conductivity instruments and sensors must be calibrated together. For a single-point calibration, select the one solution that approximates the expected conductivity or ppm level of total salts. Mixed Salt standards are the most frequently used in the field to sample naturally occurring water sources, boiler feed water, or cooling tower water. Typical river water, well water, or lake water sample will contain a mixture of several different salts. Sensorex Mixed Salt standards simulate a "Natural" mixture of common salt compounds found in these sources. Sodium sulfate, sodium bicarbonate, and sodium chloride salts are blended to provide a representative value. There are certain applications where Single Salt Solutions are preferred. NaCl Solution is routinely used to calibrate instruments measuring Sea Water or brackish water samples. Reagent grade salt and high resistivity DI water is compounded for accurate results. KCI Single Salt Solution may be used with conductivity meters that read directly in Siemens or Ohms. KCI (potassium chloride) is established as an international calibration standard for conductivity measurement. Choose the conductivity calibration solution that is right for your application. CA Residents: Prop 65 WARNING(S)

TDS1000/G Conductivity Solution, 1000ppm/1417uS, 1 Gal. by Sensorex

TDS/Conductivity instruments and sensors must be calibrated together. For a single-point calibration, select the one solution that approximates the expected conductivity or ppm level of total salts. Mixed Salt standards are the most frequently used in the field to sample naturally occurring water sources, boiler feed water, or cooling tower water. Typical river water, well water, or lake water sample will contain a mixture of several different salts. Sensorex Mixed Salt standards simulate a "Natural" mixture of common salt compounds found in these sources. Sodium sulfate, sodium bicarbonate, and sodium chloride salts are blended to provide a representative value. There are certain applications where Single Salt Solutions are preferred. NaCl Solution is routinely used to calibrate instruments measuring Sea Water or brackish water samples. Reagent grade salt and high resistivity DI water is compounded for accurate results. KCI Single Salt Solution may be used with conductivity meters that read directly in Siemens or Ohms. KCI (potassium chloride) is established as an international calibration standard for conductivity measurement. Choose the conductivity calibration solution that is right for your application. CA Residents: Prop 65 WARNING(S)

TDS1000/P Conductivity Solution, 1000ppm/1417uS, 1 Pt. by Sensorex

TDS/Conductivity instruments and sensors must be calibrated together. For a single-point calibration, select the one solution that approximates the expected conductivity or ppm level of total salts. Mixed Salt standards are the most frequently used in the field to sample naturally occurring water sources, boiler feed water, or cooling tower water. Typical river water, well water, or lake water sample will contain a mixture of several different salts. Sensorex Mixed Salt standards simulate a "Natural" mixture of common salt compounds found in these sources. Sodium sulfate, sodium bicarbonate, and sodium chloride salts are blended to provide a representative value. There are certain applications where Single Salt Solutions are preferred. NaCl Solution is routinely used to calibrate instruments measuring Sea Water or brackish water samples. Reagent grade salt and high resistivity DI water is compounded for accurate results. KCI Single Salt Solution may be used with conductivity meters that read directly in Siemens or Ohms. KCI (potassium chloride) is established as an international calibration standard for conductivity measurement. Choose the conductivity calibration solution that is right for your application. CA Residents: Prop 65 WARNING(S)

TDS15 Conductivity Solution, 15ppm/23.8uS, 1Qt by Sensorex

TDS/Conductivity instruments and sensors must be calibrated together. For a single-point calibration, select the one solution that approximates the expected conductivity or ppm level of total salts. Mixed Salt standards are the most frequently used in the field to sample naturally occurring water sources, boiler feed water, or cooling tower water. Typical river water, well water, or lake water sample will contain a mixture of several different salts. Sensorex Mixed Salt standards simulate a "Natural" mixture of common salt compounds found in these sources. Sodium sulfate, sodium bicarbonate, and sodium chloride salts are blended to provide a representative value. There are certain applications where Single Salt Solutions are preferred. NaCl Solution is routinely used to calibrate instruments measuring Sea Water or brackish water samples. Reagent grade salt and high resistivity DI water is compounded for accurate results. KCI Single Salt Solution may be used with conductivity meters that read directly in Siemens or Ohms. KCI (potassium chloride) is established as an international calibration standard for conductivity measurement. Choose the conductivity calibration solution that is right for your application. CA Residents: Prop 65 WARNING(S)