Reference Thermometers

90452-32 Secondary Reference PRT, 0.25" x 12", -200~420C, Bare Wire by Digi-Sense

AM1730 - Secondary reference PRT/RTD probes: These probes are the workhorse of laboratories. With a calibration uncertainty at 0°C of just ±0.015°C, these probes fully meet ITS-90 criteria for reference thermometers fully. The unique design achieves an excellent balance between hysteresis effect and mechanical/thermal shocks. Both series boast very low short term stability of 7 mK at TPW. The AM1730 has a range of -200 to 420°C.

• Equivalent to Fluke Calibration / Hart Scientific Model 5615 and 5616

90452-33 Secondary Reference PRT, 0.25" x 12", -200~420C, Spade by Digi-Sense

AM1730 - Secondary reference PRT/RTD probes: These probes are the workhorse of laboratories. With a calibration uncertainty at 0°C of just ±0.015°C, these probes fully meet ITS-90 criteria for reference thermometers fully. The unique design achieves an excellent balance between hysteresis effect and mechanical/thermal shocks. Both series boast very low short term stability of 7 mK at TPW. The AM1730 has a range of -200 to 420°C.

• Equivalent to Fluke Calibration / Hart Scientific Model 5615 and 5616

90452-35 Secondary Reference PRT, 0.25" x 12", -200~420C, 5-Pin Din by Digi-Sense

AM1730 - Secondary reference PRT/RTD probes: These probes are the workhorse of laboratories. With a calibration uncertainty at 0°C of just ±0.015°C, these probes fully meet ITS-90 criteria for reference thermometers fully. The unique design achieves an excellent balance between hysteresis effect and mechanical/thermal shocks. Both series boast very low short term stability of 7 mK at TPW. The AM1730 has a range of -200 to 420°C.

• Equivalent to Fluke Calibration / Hart Scientific Model 5615 and 5616

90452-36 Secondary Reference PRT, 0.187" x 9", -60~300C, Bare Wire by Digi-Sense

AM1730 - Secondary reference PRT/RTD probes: These probes are the workhorse of laboratories. With a calibration uncertainty at 0°C of just ±0.015°C, these probes fully meet ITS-90 criteria for reference thermometers fully. The unique design achieves an excellent balance between hysteresis effect and mechanical/thermal shocks. Both series boast very low short term stability of 7 mK at TPW. The AM1730 has a range of -200 to 420°C.

• Equivalent to Fluke Calibration / Hart Scientific Model 5615 and 5616

90452-37 Secondary Reference PRT, 0.187" x 9", -60~300C, Spade by Digi-Sense

AM1730 - Secondary reference PRT/RTD probes: These probes are the workhorse of laboratories. With a calibration uncertainty at 0°C of just ±0.015°C, these probes fully meet ITS-90 criteria for reference thermometers fully. The unique design achieves an excellent balance between hysteresis effect and mechanical/thermal shocks. Both series boast very low short term stability of 7 mK at TPW. The AM1730 has a range of -200 to 420°C.

• Equivalent to Fluke Calibration / Hart Scientific Model 5615 and 5616

90452-39 Secondary Reference PRT, 0.187" x 9", -60~300C, 5-Pin Din by Digi-Sense

AM1730 - Secondary reference PRT/RTD probes: These probes are the workhorse of laboratories. With a calibration uncertainty at 0°C of just ±0.015°C, these probes fully meet ITS-90 criteria for reference thermometers fully. The unique design achieves an excellent balance between hysteresis effect and mechanical/thermal shocks. Both series boast very low short term stability of 7 mK at TPW. The AM1730 has a range of -200 to 420°C.

• Equivalent to Fluke Calibration / Hart Scientific Model 5615 and 5616

WD-17006-03 InnoCal NIST-Traceable Calibration; 2 to 4 Points, Liquid-in-Glass Thermometer by Oakton

Glass thermometers are one of the most common types of temperature instruments and are available in a variety of styles, sizes, and versions. Their unique characteristics of wide range, precision, repeatability, and quick response create a unique challenge for the metrologist who is calibrating these instruments. InnoCal can calibrate spirit-in-glass (SIG) thermometers. Calibrations for glass thermometers use direct comparison in high-stability liquid baths using Precision Reference Thermometers (PRTs) and Standard Platinum Resistance Thermometers (SPRTs) and high precision displays. The glass thermometers are inspected for cracks and liquid-column separations before testing.

• InnoCal is the only authorized service center for ERTCO brand liquid-in-glass (LIG) thermometers in the United States
• We also calibrate any make and model of LIG thermometers including Brooklyn Thermometer, Miller and Weber, Inc., LSW, and H-B Instruments
• Testing range for liquid-in-glass thermometers is from -80 to 420°C (-176 to 788°F)
• Calibrated at manufacturer's recommended points or at your desired points depending on your specific requirements. Correction factors are also provided for your convenience.

To meet your calibration needs:

• All calibration certificates contain as-found and as-left data, estimated measurement uncertainties (emu's), and test uncertainty ratios (TUR's) at no additional cost!
• This NIST-traceable calibration allows you to confirm that the specific asset you purchase meets the manufacturer's published specification
• EPA, USDA, ISO, and GLP/GMPs standards require regular NIST-Traceable calibration of all test equipment being used in critical applications
• Receive your product calibrated and ready to use rather than sending it to a third-party or internal calibration lab and incurring additional delays

All measurements reported are traceable to SI units via national standards maintained by NIST and performed in compliance with ANSI Z540, ISO17025, and MIL-STD-45662A. FDA Compliant.

InnoCal is accredited to ISO/IEC 17025 by the American Association for Laboratory Accreditation (A2LA) under certificate number 1746.01. This accreditation is your assurance that the calibration is performed in a qualified, controlled laboratory.

Calibrations on glass thermometers are performed using direct comparison in high-stability liquid baths using high-precision PRT's and SPRT's and displays. Thermometers are inspected for cracks and liquid-column separations before testing. Measurements are performed at 2 to 4 points between -197°C and 550°C.

Points are generally selected at the manufacturer's specified points but customer-specified points can be accommodated. For certificates with more calibrations points, see 17006-05 for 5 to 9 points, and 17006-06 for 10 to 15 points.

WD-17006-05 InnoCal NIST-Traceable Calibration; 5 to 9 Points, Liquid-in-Glass Thermometer by Oakton

Glass thermometers are one of the most common types of temperature instruments and are available in a variety of styles, sizes, and versions. Their unique characteristics of wide range, precision, repeatability, and quick response create a unique challenge for the metrologist who is calibrating these instruments. InnoCal can calibrate spirit-in-glass (SIG) thermometers. Calibrations for glass thermometers use direct comparison in high-stability liquid baths using Precision Reference Thermometers (PRTs) and Standard Platinum Resistance Thermometers (SPRTs) and high precision displays. The glass thermometers are inspected for cracks and liquid-column separations before testing.

• InnoCal is the only authorized service center for ERTCO brand liquid-in-glass (LIG) thermometers in the United States
• We also calibrate any make and model of LIG thermometers including Brooklyn Thermometer, Miller and Weber, Inc., LSW, and H-B Instruments
• Testing range for liquid-in-glass thermometers is from -80 to 420°C (-176 to 788°F)
• Calibrated at manufacturer's recommended points or at your desired points depending on your specific requirements. Correction factors are also provided for your convenience.

To meet your calibration needs:

• All calibration certificates contain as-found and as-left data, estimated measurement uncertainties (emu's), and test uncertainty ratios (TUR's) at no additional cost!
• This NIST-traceable calibration allows you to confirm that the specific asset you purchase meets the manufacturer's published specification
• EPA, USDA, ISO, and GLP/GMPs standards require regular NIST-Traceable calibration of all test equipment being used in critical applications
• Receive your product calibrated and ready to use rather than sending it to a third-party or internal calibration lab and incurring additional delays

All measurements reported are traceable to SI units via national standards maintained by NIST and performed in compliance with ANSI Z540, ISO17025, and MIL-STD-45662A. FDA Compliant.

InnoCal is accredited to ISO/IEC 17025 by the American Association for Laboratory Accreditation (A2LA) under certificate number 1746.01. This accreditation is your assurance that the calibration is performed in a qualified, controlled laboratory.

Calibrations on glass thermometers are performed using direct comparison in high-stability liquid baths using high-precision PRT's and SPRT's and displays. Thermometers are inspected for cracks and liquid-column separations before testing. Measurements are performed at 5 to 9 points between -197°C and 550°C.

Points are generally selected at the manufacturer's specified points but customer-specified points can be accommodated. For certificates with more calibrations points, see 17006-06 for 10 to 15 points.

90452-64 100 Ohm, Metal SPRT, 6.35x480 mm, -200~500C, Spade by Digi-Sense

AM1850 and AM1860 Series - Standard platinum resistance thermometer SPRT probes: SPRT's are used to interpolate temperature in the range from -189.3442°C to 660.323°C on the International Temperature Scale of 1990 (ITS-90). They are widely used as standard or reference thermometers to calibrate other thermometers and to measure temperature precisely in primary and secondary laboratories. Digi-Sense SPRTs feature a extremely low drift rate, outstanding stability and repeatability. The AM1850 and AM1860 come with a metal sheath.

Accuracy is dependent on the estimated measurement uncertainty of the calibration service providing the calibration.

Probe is 100 ohms

• Comparable to Fluke Calibration / Hart Scientific Model 5699

Includes

Each SPRT comes with a wood carrying case.

90452-65 25 Ohm, Metal SPRT, 6.35x480 mm, -200~500C, Spade by Digi-Sense

AM1850 and AM1860 Series - Standard platinum resistance thermometer SPRT probes: SPRT's are used to interpolate temperature in the range from -189.3442°C to 660.323°C on the International Temperature Scale of 1990 (ITS-90). They are widely used as standard or reference thermometers to calibrate other thermometers and to measure temperature precisely in primary and secondary laboratories. Digi-Sense SPRTs feature a extremely low drift rate, outstanding stability and repeatability. The AM1850 and AM1860 come with a metal sheath.

Accuracy is dependent on the estimated measurement uncertainty of the calibration service providing the calibration.

Probe is 25 ohms

• Comparable to Fluke Calibration / Hart Scientific Model 5699

Includes

Each SPRT comes with a wood carrying case.

90452-66 100 Ohm, Metal SPRT, 6.35x500 mm, -200~670C, Spade by Digi-Sense

AM1850 and AM1860 Series - Standard platinum resistance thermometer SPRT probes: SPRT's are used to interpolate temperature in the range from -189.3442°C to 660.323°C on the International Temperature Scale of 1990 (ITS-90). They are widely used as standard or reference thermometers to calibrate other thermometers and to measure temperature precisely in primary and secondary laboratories. Digi-Sense SPRTs feature a extremely low drift rate, outstanding stability and repeatability. The AM1850 and AM1860 come with a metal sheath.

Accuracy is dependent on the estimated measurement uncertainty of the calibration service providing the calibration.

Probe is 100 ohms

• Comparable to Fluke Calibration / Hart Scientific Model 5699

Includes

Each SPRT comes with a wood carrying case.

90452-67 25 Ohm, Metal SPRT, 6.35 x 500 mm, -200~670C, Spade by Digi-Sense

AM1850 and AM1860 Series - Standard platinum resistance thermometer SPRT probes: SPRT's are used to interpolate temperature in the range from -189.3442°C to 660.323°C on the International Temperature Scale of 1990 (ITS-90). They are widely used as standard or reference thermometers to calibrate other thermometers and to measure temperature precisely in primary and secondary laboratories. Digi-Sense SPRTs feature a extremely low drift rate, outstanding stability and repeatability. The AM1850 and AM1860 come with a metal sheath.

Accuracy is dependent on the estimated measurement uncertainty of the calibration service providing the calibration.

Probe is 25 ohms

• Comparable to Fluke Calibration / Hart Scientific Model 5699

Includes

Each SPRT comes with a wood carrying case.

90452-68 25 Ohm, Quartz SPRT, 7x480 mm, -200~500C, Spade by Digi-Sense

AM1950 and AM1960 Series - Standard platinum resistance thermometer SPRT probes: SPRT's are used to interpolate temperature in the range from -189.3442°C to 660.323°C on the International Temperature Scale of 1990 (ITS-90). They are widely used as standard or reference thermometers to calibrate other thermometers and to measure temperature precisely in primary and secondary laboratories. Digi-Sense SPRTs feature a extremely low drift rate, outstanding stability and repeatability. The AM1950 and AM1960 come with a quartz sheath.

Accuracy is dependent on the estimated measurement uncertainty of the calibration service providing the calibration.

• Equivalent to Fluke Calibration / Hart Scientific Model 5681 and 5683

Includes

Each SPRT comes with a wood carrying case.

90452-69 25 Ohm, Quartz SPRT, 7x500 mm, -200~670C, Spade by Digi-Sense

AM1950 and AM1960 Series - Standard platinum resistance thermometer SPRT probes: SPRT's are used to interpolate temperature in the range from -189.3442°C to 660.323°C on the International Temperature Scale of 1990 (ITS-90). They are widely used as standard or reference thermometers to calibrate other thermometers and to measure temperature precisely in primary and secondary laboratories. Digi-Sense SPRTs feature a extremely low drift rate, outstanding stability and repeatability. The AM1950 and AM1960 come with a quartz sheath.

Accuracy is dependent on the estimated measurement uncertainty of the calibration service providing the calibration.

• Equivalent to Fluke Calibration / Hart Scientific Model 5681 and 5683

Includes

Each SPRT comes with a wood carrying case.

0560 1805 01 805i IR Thermometer Smart Probe by Testo

The testo 805i Smart Probe is an infrared (IR) thermometer that provides non-contact temperature readings; great for checking breakers, motors, ducts, and registers from a distance. The measurement area is indicated by a circular laser pattern which asssures accurate targeting measurement. Use the testo Smart Probes App to take photos of objects and include the laser pattern and the temperature reading for your reference. Easily adjust the emissivity within the App and store data as files or share via text or email. The testo 805i works on smart devices with either Android or Apple operating systems.

The testo Smart Probes App is a powerful and easy-touse tool. It allows you to remotely read measurements from up to six (6) Smart Probes and easily document/report the results. Automatic calculations make it a snap!

All measurement data is displayed as instrument readings, tables, or graphs. The measurements can be quickly saved as PDF or Excel files. The App creates custom reports which can be saved and/or shared by email. All your data can be stored and retrieved saving you hours of time consuming paperwork!

• Measures non-contact temperature
• Optic target ratio (10:1)
• Measurement area indicated by circular laser pattern assures accurate assessments
• Photograph objects with smart device, capturing measurement marker and temperature values for reference and reporting
• Measurement data is transmitted to the convenient and powerful testo Smart Probes App in your smart device
• Tough, accurate, and easy-to-use
• For all HVAC/R technicians and contractors

20250-25 Professional Dual-Laser Infrared Thermometer with Bluetooth® Connectivity, 50:1 by Digi-Sense

Using our free Digi-Sense D/S IR Therm app, this dual-laser infrared (IR) thermometer with Bluetooth® technology allows you to transmit data directly to your Android or iOS device. Now you can view data at a safe distance from dangerous equipment or hazardous locations and even use your smart device as a real-time secondary display for checking measurements, eliminating the need to write down readings on paper. The results are automatically stored in the app with a date-and-time stamp and can be saved as a CSV file and emailed for future reference, manipulation, or analysis to help determine trends and conditions over a long period of time. Use the app to attach photos and notes to the records creating a clear reference point for your work - ideal for record keeping at large sites.

The IR thermometer offers fast response time and high accuracy due to its 50 to 1 distance-to-sight ratio. Dual targeting lasers provide precise indication of the measurement area. It is ideal for a wide range of applications including food preparation, safety and fire inspection, plastic molding, marine, HVAC, and fleet maintenance.

Advanced features include internal data logging, high/low temperature alarms, adjustable emissivity, temperature differential, data Hold, Max/Min/Avg readings, USB interface for data transmission, and auto power-off. The meter also supports contact measurement through a type K thermocouple input.

The instrument is fully tested and calibrated to NIST-traceable standards for reliable measurements right out of the box, saving you time and money!

Key Features

• Get the most out of your data with our user-friendly mobile app
• Unlimited data storage based on smart device capacity
• Reliable measurements, guaranteed! Precalibrated to NIST-traceable standards
• Internal data logging saves up to 32K IR readings
• External type K thermocouple input for contact measurements
• Dual-laser sighting to quickly pinpoint target areas
• Backlight dot-matrix display permits viewing in low-light conditions

Includes

Type K flexible probe, software, tripod, carrying case, 9 V battery, and NIST-traceable calibration report with data.

0563 8451 845 Adjustable Focus IR Thermometer with Aluminium Case and Humidity Module by Testo

For the first time, surface temperatures with smallest diameters can be measured accurately at short and long distances. The switchable optics for far-field and close focus measurement make this possible. Far-field measurements are carried out at an optical resolution of 75:1. In this way, surface temperatures can be measured accurately even at great distances from the object to be measured. At a distance of 1.2 metres from the object to be measured, the measuring spot diameter is only 16 mm. A cross laser marks the measuring spot exactly during measurement. During measurements at a short distance from the object being measured, the close focus optics has a spot diameter of only 1 mm at a distance of 70 mm. Two laser points mark the spot exactly.

• Switchable optics for far-field measurements (75:1) and close focus (1 mm, distance 70 mm)
• Especially bright cross laser sighting for indicating the actual measurement point
• Integrated humidity module for measuring indoor air humidity and for determining dewpoint distance
• Reference accuracy ± 0.75 °C with super-fast measurement technology (scanning 100 ms)
• Backlit display (3-line), shows °C, %RH, °C td, min./max. values, alarm limit values and degree of emission
• Optical and audible alarm when limit values are exceeded
• Probe socket for TC probe for determining emissivity
• Instrument memory for 90 measurement protocols
• PC software for archiving and documenting measurement data (included in delivery)
• Tripod fitting for online measurement via USB cable (included in delivery)
• Measurement data documentation on site with Testo printer

WD-20250-18 Professional Single Input Thermocouple Thermometer and NIST Traceable Calibration by Digi-Sense

Handheld thermocouple thermometers provide precise measurements when accuracy is a must, delivering dependable results every time! Each model is packed with distinctive features for use in a wide array of applications.

Features

• Reliable measurements, guaranteed! Precalibrated to NIST-traceable standards.
• Large backlight LCD for easy viewing in dimly lit conditions
• Minimum, maximum, and average readings, plus data Hold function
• Display of temp differential (except model 20250-01)
• Relative time clock on Min/Max/Avg provides a time reference for major events
• Electronic offset function allows compensation of probe errors to maximize overall accuracy
• User-selectable readout in °C, °F, or Kelvin (K) with 0.1 resolution
• Simple, intuitive setup and operation
• Auto power-off mode extends battery life
• Ergonomic design fits comfortably in your hand
• Data logging models available
• Accept a wide variety of thermocouple probes
• Infrared input port allows safe, noncontact measurements with optional IR wand
• Heavy-duty construction withstands knocks and jars
• Scan function for continuous reading in real time (except model 20250-18)
• Data logging software features graphing function

Applications

• Agricultural
• Educational
• Food processing
• HVAC
• Industrial
• Laboratory
• R&D
• Preventive maintenance

WD-20250-20 Professional 4 Input Data Logging Thermocouple Thermometer with NIST Traceable Calibration by Digi-Sense

Handheld thermocouple thermometers provide precise measurements when accuracy is a must, delivering dependable results every time! Each model is packed with distinctive features for use in a wide array of applications.

Features

• Reliable measurements, guaranteed! Precalibrated to NIST-traceable standards.
• Large backlight LCD for easy viewing in dimly lit conditions
• Minimum, maximum, and average readings, plus data Hold function
• Display of temp differential (except model 20250-01)
• Relative time clock on Min/Max/Avg provides a time reference for major events
• Electronic offset function allows compensation of probe errors to maximize overall accuracy
• User-selectable readout in °C, °F, or Kelvin (K) with 0.1 resolution
• Simple, intuitive setup and operation
• Auto power-off mode extends battery life
• Ergonomic design fits comfortably in your hand
• Data logging models available
• Accept a wide variety of thermocouple probes
• Infrared input port allows safe, noncontact measurements with optional IR wand
• Heavy-duty construction withstands knocks and jars
• Scan function for continuous reading in real time (except model 20250-18)
• Data logging software features graphing function

Applications

• Agricultural
• Educational
• Food processing
• HVAC
• Industrial
• Laboratory
• R&D
• Preventive maintenance

GT1 Gas-T-One Manometer + Thermometer IN ONE. Includes Differential Pressure Manometer + Thermometer, Pressure Hoses, QR Code App, Bluetooth, Hard Plastic Carrying Case, Quick Guide and AC Charger by Seitron Americas

Easy to Use / Accurate / Robust

• Differential Pressure (-40 to +80" H2O)
• Temperature (-4 to 1472 °F)
• QR Code Mobile App for saved/emailed reports
• Li-Ion Rechargeable Batteries
• Bluetooth
• Optional Printer

Kit Includes

• Gas-T-One Manometer
• Dual Pressure Hoses
• Hard Plastic ABS Carrying Case
• AC Charger
• Quick Reference Guide

GT1-P Gas-T-One Manometer + Thermometer IN ONE. WIRELESS BT PRINTER INCLUDED. Includes Differential Pressure Manometer + Thermometer, Pressure Hoses, QR Code App, Bluetooth, Hard Plastic Carrying Case, Quick Guide and AC Charger by Seitron Americas

Easy to Use / Accurate / Robust

• Differential Pressure (-40 to +80" H2O)
• Temperature (-4 to 1472 °F)
• QR Code Mobile App for saved/emailed reports
• Li-Ion Rechargeable Batteries
• Bluetooth
• Optional Printer

Kit Includes

• Gas-T-One Manometer
• Dual Pressure Hoses
• Hard Plastic ABS Carrying Case
• AC Charger
• Quick Reference Guide

08107-04 TI.ST Dual-Magnet Surface Thermometers; Range 0 - 500F by Digi-Sense

An ideal choice for use on ovens, boilers, process lines, motors, or anywhere a surface temperature needs to be measured. The specially designed bimetal sensing element and housing provide quick readings. These thermometers feature a dual magnet mount that will attach to an ferrous surface, steel case, glass lens and polished aluminum 2" dial with easy-to-read graduations.

• For reference only, not intended for applications where a precise reading is required
• Anti-parallax dial for accurate readings
• Item is not recommended to be calibrated

08107-05 TI.ST Dual-Magnet Surface Thermometers; Range 50 - 750F by Digi-Sense

An ideal choice for use on ovens, boilers, process lines, motors, or anywhere a surface temperature needs to be measured. The specially designed bimetal sensing element and housing provide quick readings. These thermometers feature a dual magnet mount that will attach to an ferrous surface, steel case, glass lens and polished aluminum 2" dial with easy-to-read graduations.

• For reference only, not intended for applications where a precise reading is required
• Item is not recommended to be calibrated

08107-06 TI.ST Dual-Magnet Surface Thermometers; Range 0 - 150F by Digi-Sense

An ideal choice for use on ovens, boilers, process lines, motors, or anywhere a surface temperature needs to be measured. The specially designed bimetal sensing element and housing provide quick readings. These thermometers feature a dual magnet mount that will attach to an ferrous surface, steel case, glass lens and polished aluminum 2" dial with easy-to-read graduations.

• For reference only, not intended for applications where a precise reading is required
• Item is not recommended to be calibrated