Radiation Alert Detector

MC1K Handheld Radiation Alert Detector by SE International

The new ergonomic MC1K is a handheld survey meter using a built-in energy compensated GM detector. It detects gamma and x-rays up to 1000 mR/hr over 4 selectable ranges. A beep sounds and a count light flashes with each event detected.

Monitor 4 Handheld Radiation Alert Detector by SE International

The M4 and M4EC are compact, ergonomic, general purpose survey meters capable of detecting alpha, beta, gamma, and x-rays over 3 selectable ranges. A red count light flashes and a beep sounds with each event detected. The Monitor 4EC offers a more linear reading for gamma and x-rays (above 40 keV).Click here for Original Monitor 4. Click here for USB Model.

Both Detect beta at 50 keV with typical 35% detection efficiency and beta at 150 keV with typical 75% detection efficiency.

Monitor 4:

Monitor 4EC:

Monitor 4EC Handheld Radiation Alert Detector by SE International

The M4 and M4EC are compact, ergonomic, general purpose survey meters capable of detecting alpha, beta, gamma, and x-rays over 3 selectable ranges. A red count light flashes and a beep sounds with each event detected. The Monitor 4EC offers a more linear reading for gamma and x-rays (above 40 keV).Click here for Original Monitor 4. Click here for USB Model.

Both Detect beta at 50 keV with typical 35% detection efficiency and beta at 150 keV with typical 75% detection efficiency.

Monitor 4:

Monitor 4EC:

Monitor 4ECUSB Handheld Radiation Alert Detector with Mini-USB Option by SE International

The M4 and M4EC are compact, ergonomic, general purpose survey meters capable of detecting alpha, beta, gamma, and x-rays over 3 selectable ranges. A red count light flashes and a beep sounds with each event detected. The Monitor 4EC offers a more linear reading for gamma and x-rays (above 40 keV). Click here for Monitor 4 without USB option.

Monitor 4USB Handheld Radiation Alert Detector with Mini-USB Option by SE International

The M4 and M4EC are compact, ergonomic, general purpose survey meters capable of detecting alpha, beta, gamma, and x-rays over 3 selectable ranges. A red count light flashes and a beep sounds with each event detected. The Monitor 4EC offers a more linear reading for gamma and x-rays (above 40 keV). Click here for Monitor 4 without USB option.

Radiation Alert Area Monitor by SE International

The Radiation Alert® Area Monitor is one of the most user friendly, all inclusive, state of the art radiation area monitors available. The easy to use interface is an intelligent resistive touch screen display featuring a large five digit LED readout.

It comes with either an internal or external detector and free software for monitoring every Radiation Alert® Area Monitor on your network. Includes user selectable warning indicators for low and high radiation alarm levels, low battery, and detector failure. Setup email and text alerts to recieve alarms while on the go. All the settings are stored internally, even when power is disconnected. All units come with a Certificate of Conformance. NIST Source calibrations available upon request.

GammaPAL Radiation Alert Portable Analysis Lab by SE International

Introducing The GammaPAL, the ideal instrument for detecting contamination in food, soil, and water. A portable laboratory containing all the items you need for sampling in the field or from a stationary base of operations. The GammaPAL is a complete measuring system for analyzing radiation contamination in milk, meat, fish, grain, fruit, and vegetables, as well as in air swipes, soil samples, and other materials. Includes: Inspector survey meter with wipe test plate and swipes for preliminary testing, a rugged Nomad Pocket PC with bar code scanner for easily labeling samples, tools for sample collection, and screw top marinelli beakers for sample storage. The GammaPAL is your all-in-one sampling kit for radiation safety.

Our GM based detectors are ideal for a number of applications, ranging from surface contamination and sampling to personal and environmental monitoring. For detecting contamination in food, soil, and water and to accurately quantify and qualify the results, you need a scintillation detector. Many scintillation devices with this capacity cost upwards of tens of thousands of dollars. The GammaPAL can provide these capabilities for much less.

Radioactive material in the sample is detected with a 2x2 sodium iodide scintillation probe using a Marinelli geometry for soil, water, and bulk samples or a 2-inch filter geometry for wipes and air samples.The 500ml beaker is placed in a 1-inch thick lead shield. Depending on the sampling time and the isotope, the detection limit is approximately 2.5-100 Bq/l and can easily identify concentrations of Iodine 131, Cesium 134, and Cesium 137.

Kit Includes: URSA-II Multi Channel Analyzer w/ GammaPAL Software | One 2X2 Nal Detector w/ C-C cable | TDS Nomad 900LE w/ Bar Code Scanner and Serial Boot | Carries 10 Empty Screw Top Marinelli Beakers | Lead Marinelli Shield Case | 1 Marinelli with K40 reference standard | 5000g Tempered Digital Scale | Sieve for Sample Collection | Small Hand Shovel | iM3075 StormCase w Wheels | Inspector Survey Meter w/ Wipe Test Plate | Swipes |

The Frisker Digital Radiation Detector by SE International

Sick of getting tripped up by cables? Want that free hand back? Tired of lugging around a meter the size of a lunch box? Presenting The Radiation Alert® Frisker . A light weight, single-handed radiation contamination instrument that has been designed to meet the demands of today s radiation personnel for leak testing, surface monitoring, sample screening, and personnel screening. By integrating the latest electronics with a proven and dependable Geiger-Mueller detector, S.E. International has created a rugged, ergonomic tool that addresses a number of radiological applications. The Radiation Frisker detects alpha, beta, and gamma with an assortment of units of measure, customizable alarm levels, and a backlit display.

Monitor 200 Compact Radiation Detector by SE International

The Monitor 200 measures alpha, beta, gamma, and x-rays. Its digital display shows readings in your choice of CPM, CPS, μSv/hr, mR/hr, or in accumulated counts. It has a digital display, a red count light, and a beeper that sounds with each count detected. Other features include an adjustable timer, and selectable alert. With the free Observer USB Software Family, you can set computer alarms, calibrate your instrument, and download your collected data from the internal memory for easy reporting!

The Ranger Radiation Survey Meter by SE International

The Ranger offers maximum performance in a lightweight, rugged solution for surveying at the facility or in the field. The Ranger has been designed for industrial environments, but it still has all of the features you ve come to love in the lab. The Ranger is a small, handheld, microprocessor-based instrument which offers excellent sensitivity to low levels of alpha, beta, gamma, and x-rays and has built in efficiencies for common isotopes to calculate activity in Bq and DPM. It has a backlit digital display, a red count light, and a beeper that sounds with each count detected. Other features include selectable alert levels, an adjustable timer, and an optional wipe test plate for swipes. Internal memory and the free Observer USB Software allow you to download your data, set computer alarms, and calibrate your instrument!

Monitor 1000EC Energy Compensated Radiation Detector by SE International

The Monitor 1000ec measures gamma, and x-rays. Perfect for most applications requiring an energy compensated detector. Users can choose from readings of CPM, CPS, μSv/hr, mR/hr, or in accumulated counts. It has a red count light, a beeper that sounds with each count detected, and includes an adjustable timer, and selectable alert. With the free Observer Software for PCs and Android OS, you can automate and record readings for easy reporting!

Ranger EXP Digital Radiation Meter with External Probe by SE International

The Ranger EXP offers maximum performance in a lightweight, rugged solution for using your survey meter in the field. The Ranger EXP is designed specifically for individuals operating in tough environments. The small, handheld unit offers excellent sensitivity to low levels of alpha, beta, gamma, and x-rays. The digital readout is displayed with a red count light and a beeper sounds with each count detected. Other features include an adjustable timer, selectable alert, and with the free Observer USB Software Family, you can download your collected data, set alarms, and calibrate your meter!

Tactical Carrying Case by SE International

This tactical carrying case is custom designed for use with the Radiation Alert Ranger®, Monitor200, and Monitor1000EC. It was created for users whose operational needs are primarily in the field. The shell is carefully constructed using durable and lightweight KYDEX. Thermoplastic provides ample protection against the daily wear and tear encountered when wearing a holstered unit.

This versatile carrying case is also equipped with an adjustable tensioning clip, allowing the user to dial in the exact amount of pressure needed. This ensures that the instrument is securely seated in the holster while, at the same time, remaining easy to extract and re-insert. The Blade-Tech Tek-Lok belt clip is the industry standard when it comes to belt mounting solutions. Innovative and versatile, the adjustable Tek-Lok can accommodate up to a 2.25" belt as well as a multitude of mounting positions.

Smart design. Durable materials. This case is an excellent choice for anyone operating their Radiation Alert Ranger®, Monitor200, or Monitor1000EC in an uncontrolled environment.

RAP640 Scintillation Probe by SE International

The CsI (Tl) crystal used in Radiation Alert® Probes has a higher atomic number, is more rugged, and less hygroscopic than a typical Nal detector. The improved gamma ray absorption allows a thinner crystal to be used, effectively reducing the background count rate.

Superior to a 1 x 1-inch NaI detector, this is a great choice for an all-around gamma and x-ray detector. Optimal energy range of about 20 keV to 2 MeV. Highest efficiency for a broad spectrum of gamma-emitting isotopes.

Scintillation Probe - 1.0'' x 0.040''CsI(Tl) crystal (1.0"diam x 0.04" thick) (25.4 x 1.0mm) by SE International

Typically, crystals are grown to order once we find the right one for your needs. Below are the specifications for the most common detectors that we offer in this variety.

NaI(Tl), or Sodium Iodide, crystal is recommended for nuclide identification in room temperature application. It provides the best energy resolution for gamma rays in this environment and is relatively inexpensive. Sodium Iodide probes are available in a wide variety of sizes.

The CsI (Tl), or Cesium Iodide, crystal used in Radiation Alert® Probes has a higher atomic number, is more rugged, and less hygroscopic than a typical Nal detector. The improved gamma ray absorption allows a thinner crystal to be used, effectively reducing the background count rate.

1 Inches X 1 Inches (Typically 1.0" dia x 1.0" thick (25.4 x 25.4mm)
2 inches X 2 Inches (Typically 2.0" dia x 2.0" thick (50.8 x 50.8mm)
Smaller and larger custom sizes available.
Nal(Tl) Standard. Optional Extra: BGO, Cs(Tl) or (Na), TSO. Contact for more info.

Scintillation Probe - 1.0'' x 0.040' 'NaI (Tl) crystal (1.0"diam x 0.04" thick) (25.4 x 1.0mm) by SE International

Typically, crystals are grown to order once we find the right one for your needs. Below are the specifications for the most common detectors that we offer in this variety.

NaI(Tl), or Sodium Iodide, crystal is recommended for nuclide identification in room temperature application. It provides the best energy resolution for gamma rays in this environment and is relatively inexpensive. Sodium Iodide probes are available in a wide variety of sizes.

The CsI (Tl), or Cesium Iodide, crystal used in Radiation Alert® Probes has a higher atomic number, is more rugged, and less hygroscopic than a typical Nal detector. The improved gamma ray absorption allows a thinner crystal to be used, effectively reducing the background count rate.

1 Inches X 1 Inches (Typically 1.0" dia x 1.0" thick (25.4 x 25.4mm)
2 inches X 2 Inches (Typically 2.0" dia x 2.0" thick (50.8 x 50.8mm)
Smaller and larger custom sizes available.
Nal(Tl) Standard. Optional Extra: BGO, Cs(Tl) or (Na), TSO. Contact for more info.

Scintillation Probe - 1.0'' x 0.25'' CsI (Tl) crystal (1.0" diam x 0.25 thick) (25.4 x 6.35mm) by SE International

Typically, crystals are grown to order once we find the right one for your needs. Below are the specifications for the most common detectors that we offer in this variety.

NaI(Tl), or Sodium Iodide, crystal is recommended for nuclide identification in room temperature application. It provides the best energy resolution for gamma rays in this environment and is relatively inexpensive. Sodium Iodide probes are available in a wide variety of sizes.

The CsI (Tl), or Cesium Iodide, crystal used in Radiation Alert® Probes has a higher atomic number, is more rugged, and less hygroscopic than a typical Nal detector. The improved gamma ray absorption allows a thinner crystal to be used, effectively reducing the background count rate.

1 Inches X 1 Inches (Typically 1.0" dia x 1.0" thick (25.4 x 25.4mm)
2 inches X 2 Inches (Typically 2.0" dia x 2.0" thick (50.8 x 50.8mm)
Smaller and larger custom sizes available.
Nal(Tl) Standard. Optional Extra: BGO, Cs(Tl) or (Na), TSO. Contact for more info.

Scintillation Probe - 1.0'' x 0.25'' NaI (Tl) crystal (1.0" diam x 0.25 thick) (25.4 x 6.35mm) by SE International

Typically, crystals are grown to order once we find the right one for your needs. Below are the specifications for the most common detectors that we offer in this variety.

NaI(Tl), or Sodium Iodide, crystal is recommended for nuclide identification in room temperature application. It provides the best energy resolution for gamma rays in this environment and is relatively inexpensive. Sodium Iodide probes are available in a wide variety of sizes.

The CsI (Tl), or Cesium Iodide, crystal used in Radiation Alert® Probes has a higher atomic number, is more rugged, and less hygroscopic than a typical Nal detector. The improved gamma ray absorption allows a thinner crystal to be used, effectively reducing the background count rate.

1 Inches X 1 Inches (Typically 1.0" dia x 1.0" thick (25.4 x 25.4mm)
2 inches X 2 Inches (Typically 2.0" dia x 2.0" thick (50.8 x 50.8mm)
Smaller and larger custom sizes available.
Nal(Tl) Standard. Optional Extra: BGO, Cs(Tl) or (Na), TSO. Contact for more info.

Scintillation Probe - 1.0" x 1.0" CsI (Tl) crystal (1.0" diam x 1.0" thick) (25.4 x 25.4mm) by SE International

Typically, crystals are grown to order once we find the right one for your needs. Below are the specifications for the most common detectors that we offer in this variety.

NaI(Tl), or Sodium Iodide, crystal is recommended for nuclide identification in room temperature application. It provides the best energy resolution for gamma rays in this environment and is relatively inexpensive. Sodium Iodide probes are available in a wide variety of sizes.

The CsI (Tl), or Cesium Iodide, crystal used in Radiation Alert® Probes has a higher atomic number, is more rugged, and less hygroscopic than a typical Nal detector. The improved gamma ray absorption allows a thinner crystal to be used, effectively reducing the background count rate.

1 Inches X 1 Inches (Typically 1.0" dia x 1.0" thick (25.4 x 25.4mm)
2 inches X 2 Inches (Typically 2.0" dia x 2.0" thick (50.8 x 50.8mm)
Smaller and larger custom sizes available.
Nal(Tl) Standard. Optional Extra: BGO, Cs(Tl) or (Na), TSO. Contact for more info.

Scintillation Probe - 1.0" x 1.0" NaI (Tl) crystal (1.0" diam x 1.0" thick) (25.4 x 25.4mm) by SE International

Typically, crystals are grown to order once we find the right one for your needs. Below are the specifications for the most common detectors that we offer in this variety.

NaI(Tl), or Sodium Iodide, crystal is recommended for nuclide identification in room temperature application. It provides the best energy resolution for gamma rays in this environment and is relatively inexpensive. Sodium Iodide probes are available in a wide variety of sizes.

The CsI (Tl), or Cesium Iodide, crystal used in Radiation Alert® Probes has a higher atomic number, is more rugged, and less hygroscopic than a typical Nal detector. The improved gamma ray absorption allows a thinner crystal to be used, effectively reducing the background count rate.

1 Inches X 1 Inches (Typically 1.0" dia x 1.0" thick (25.4 x 25.4mm)
2 inches X 2 Inches (Typically 2.0" dia x 2.0" thick (50.8 x 50.8mm)
Smaller and larger custom sizes available.
Nal(Tl) Standard. Optional Extra: BGO, Cs(Tl) or (Na), TSO. Contact for more info.

Scintillation Probe - 2.0" x 2.0" CsI(Tl) crystal (2.0" diam x 2.0" thick) (50.8 x 50.8mm) by SE International

Typically, crystals are grown to order once we find the right one for your needs. Below are the specifications for the most common detectors that we offer in this variety.

NaI(Tl), or Sodium Iodide, crystal is recommended for nuclide identification in room temperature application. It provides the best energy resolution for gamma rays in this environment and is relatively inexpensive. Sodium Iodide probes are available in a wide variety of sizes.

The CsI (Tl), or Cesium Iodide, crystal used in Radiation Alert® Probes has a higher atomic number, is more rugged, and less hygroscopic than a typical Nal detector. The improved gamma ray absorption allows a thinner crystal to be used, effectively reducing the background count rate.

1 Inches X 1 Inches (Typically 1.0" dia x 1.0" thick (25.4 x 25.4mm)
2 inches X 2 Inches (Typically 2.0" dia x 2.0" thick (50.8 x 50.8mm)
Smaller and larger custom sizes available.
Nal(Tl) Standard. Optional Extra: BGO, Cs(Tl) or (Na), TSO. Contact for more info.

Scintillation Probe - 2.0" x 2.0" NaI (Tl) crystal (2.0" diam x 2.0" thick) (50.8 x 50.8mm) by SE International

Typically, crystals are grown to order once we find the right one for your needs. Below are the specifications for the most common detectors that we offer in this variety.

NaI(Tl), or Sodium Iodide, crystal is recommended for nuclide identification in room temperature application. It provides the best energy resolution for gamma rays in this environment and is relatively inexpensive. Sodium Iodide probes are available in a wide variety of sizes.

The CsI (Tl), or Cesium Iodide, crystal used in Radiation Alert® Probes has a higher atomic number, is more rugged, and less hygroscopic than a typical Nal detector. The improved gamma ray absorption allows a thinner crystal to be used, effectively reducing the background count rate.

1 Inches X 1 Inches (Typically 1.0" dia x 1.0" thick (25.4 x 25.4mm)
2 inches X 2 Inches (Typically 2.0" dia x 2.0" thick (50.8 x 50.8mm)
Smaller and larger custom sizes available.
Nal(Tl) Standard. Optional Extra: BGO, Cs(Tl) or (Na), TSO. Contact for more info.

S01-A110-200 ProRAE Guardian CD with Printed Manual by RAE Systems

ProRAE Guardian is real-time gas, radiation, dust, weather, and physiological monitoring software that connects, integrates, and relays data from various wireless monitors to a centralized system. The command center instantly displays device status, alarm, and sensor reading information, integrating all information in a single dynamic view. ProRAE Guardian real-time monitoring empowers safety professionals with instant updates of monitor data for making intelligent time critical decisions.

ProRAE Guardian advanced device management enables operational managers to manage their fleets of monitors and track worker device assignments. In addition, it can automate several common tasks to improve worker productivity along with the flexibility to define custom alerts specific to a work environment.

Key Features

• Real-time display of device status, sensor readings, and alarms
• Integrated Google Maps show precise instrument locations with alarm status
• Datalogging in text and graphical formats, and includes boolean filters
• Supports all RAE Systems wireless enabled products
• Supports up to 512 instruments simultaneously
• Dashboard for overall system status
• Fleet management for instruments
• Activity automation for calibration, bump test and report generation
• Custom rules for alarm notifications
• Remote notifications via email and text messages
• Worker-instrument association
• Security features for data protection and networking
• Leasing option for short duration projects
• Software Development Kit for integration with external systems
• Centralized monitoring of wide areas
• Simultaneous monitor data aggregation
• Increased situational awareness
• 24/7 monitoring of exposure conditions
• Early warning and tracking of hazardous threats
• Distributed Control Systems integration for process automation
• Management and control of monitors and detectors
• Increased productivity through task automation
• Lower deployment costs