Oakton Thermometer

WD-17006-03 InnoCal NIST-Traceable Calibration; 2 to 4 Points, Liquid-in-Glass Thermometer by Oakton

Glass thermometers are one of the most common types of temperature instruments and are available in a variety of styles, sizes, and versions. Their unique characteristics of wide range, precision, repeatability, and quick response create a unique challenge for the metrologist who is calibrating these instruments. InnoCal can calibrate spirit-in-glass (SIG) thermometers. Calibrations for glass thermometers use direct comparison in high-stability liquid baths using Precision Reference Thermometers (PRTs) and Standard Platinum Resistance Thermometers (SPRTs) and high precision displays. The glass thermometers are inspected for cracks and liquid-column separations before testing.

• InnoCal is the only authorized service center for ERTCO brand liquid-in-glass (LIG) thermometers in the United States
• We also calibrate any make and model of LIG thermometers including Brooklyn Thermometer, Miller and Weber, Inc., LSW, and H-B Instruments
• Testing range for liquid-in-glass thermometers is from -80 to 420°C (-176 to 788°F)
• Calibrated at manufacturer's recommended points or at your desired points depending on your specific requirements. Correction factors are also provided for your convenience.

To meet your calibration needs:

• All calibration certificates contain as-found and as-left data, estimated measurement uncertainties (emu's), and test uncertainty ratios (TUR's) at no additional cost!
• This NIST-traceable calibration allows you to confirm that the specific asset you purchase meets the manufacturer's published specification
• EPA, USDA, ISO, and GLP/GMPs standards require regular NIST-Traceable calibration of all test equipment being used in critical applications
• Receive your product calibrated and ready to use rather than sending it to a third-party or internal calibration lab and incurring additional delays

All measurements reported are traceable to SI units via national standards maintained by NIST and performed in compliance with ANSI Z540, ISO17025, and MIL-STD-45662A. FDA Compliant.

InnoCal is accredited to ISO/IEC 17025 by the American Association for Laboratory Accreditation (A2LA) under certificate number 1746.01. This accreditation is your assurance that the calibration is performed in a qualified, controlled laboratory.

Calibrations on glass thermometers are performed using direct comparison in high-stability liquid baths using high-precision PRT's and SPRT's and displays. Thermometers are inspected for cracks and liquid-column separations before testing. Measurements are performed at 2 to 4 points between -197°C and 550°C.

Points are generally selected at the manufacturer's specified points but customer-specified points can be accommodated. For certificates with more calibrations points, see 17006-05 for 5 to 9 points, and 17006-06 for 10 to 15 points.

WD-03313-70 Wall Mount Thermo-Hygrometer with Glass Thermometer by Digi-Sense

This compact instrument requires no batteries or power

Use this economical thermohygrometer for relative humidity and temperature readings in your lab, office, or computer room. It s small size makes it ideal for areas with limited space.

• Monitor humidity and temperature
• Features alcohol-filled thermometer with °F/°C temperature scales

WD-17002-10 InnoCal NIST-Traceable Calibration, Thermocouple Thermometer System Meter+Probe by Oakton

Regardless of the type of thermometry probe your application requires, InnoCal can ensure the accuracy of your meter, probe, or system!

All measurements reported are traceable to SI units via national standards maintained by NIST and performed in compliance with ANSI Z540, ISO17025 and MIL-STD-45662A. See the sample certificate under the "More Info" section to see how InnoCal's certificates provide more information in a concise manner than the rest of the industry.

InnoCal is accredited to ISO/IEC 17025 by the American Association for Laboratory Accreditation (A2LA) under certificate number 1746.01. This accreditation is your assurance that the calibration is performed in a qualified, controlled laboratory which is technically proficient and committed to quality and customer-focused continuous improvement. Our scope of A2LA accreditation can be found under the "More Info" section.

Calibrations on thermocouple systems (meter and probe) are performed using direct comparison in high-stability liquid and dry baths using high-precision PRT's and SPRT's and displays. Measurements can be performed at four points between -196 and 1300°C. Points are generally selected at standard ITS-90 points across the range of the probe but customer-specified points can be accommodated. Calibrating the probe and meter together produces the highest accuracies.

• NIST-traceable calibration allows you to confirm that the specific asset you purchase does in fact meet the manufacturer's published specification EPA, USDA, ISO and GLP/GMPs standards require regular NIST-Traceable calibration of all test equipment being used in critical applications
• Receive your product calibrated and ready to use rather than sending it to a third-party or internal calibration lab and incurring additional delays
• Calibration service for a thermocouple thermometer system (meter+probe)

WD-17003-00 InnoCal NIST-Traceable Calibration, Bimetal or Digital-Pocket Thermometer by Oakton

Regardless of the type of thermometry probe your application requires, InnoCal can ensure the accuracy of your meter, probe, or system!

All measurements reported are traceable to SI units via national standards maintained by NIST and performed in compliance with ANSI Z540, ISO17025 and MIL-STD-45662A. See the sample certificate under the "More Info" section to see how InnoCal's certificates provide more information in a concise manner than the rest of the industry.

InnoCal is accredited to ISO/IEC 17025 by the American Association for Laboratory Accreditation (A2LA) under certificate number 1746.01. This accreditation is your assurance that the calibration is performed in a qualified, controlled laboratory which is technically proficient and committed to quality and customer-focused continuous improvement. Our scope of A2LA accreditation can be found under the "More Info" section.

Calibrations on bimetal thermometers are performed using direct comparison in high-stability liquid and dry baths using high-precision PRT's and SPRT's and displays. Measurements can be performed at four points between -196 and 1300°C. Points are generally selected at standard ITS-90 points across the range of the thermometer but customer-specified points can be accommodated.

• NIST-traceable calibration allows you to confirm that the specific asset you purchase does in fact meet the manufacturer's published specification EPA, USDA, ISO and GLP/GMPs standards require regular NIST-Traceable calibration of all test equipment being used in critical applications
• Receive your product calibrated and ready to use rather than sending it to a third-party or internal calibration lab and incurring additional delays
• Calibration service for a bimetal or digital-pocket thermometer

WD-91428-07 Temp16 Single-Input RTD Thermometer by Digi-Sense

This robust and reliable meter work in any environment from the lab to the production floor. The sturdy armored construction protects against knocks and jars. All models are ergonomically designed for both large and small hands alike. The sealed keypad and ABS case meet IP54 standards for splash resistance.

Features include a large easy-to-read illuminated display, an easy-to-use five-button control panel, Min/Max, Hold, degF / degC switchable, auto shutoff, and low battery indicator. Each thermometer is individually factory calibrated. Automatic field calibration is easily performed. Simply place the probe in a container packed with ice, fill with water, then press the "CAL" button meter automatically recognizes the freezing point.

Meter requires a RTD probe with a Digi-Sense three-pin plug.

OAKTON's exclusive "3-WAY HANDS-FREE" capability allows "hands-free" operation use the built-in stand on a table top, attach the meter to metal objects through magnets inserted into the armor boot, or hang from a pipe or belt using the hook-and-loop strap. Meter comes standard with the integral stand; the "hands-free" option adds magnets and strap (order separately).

Includes

Protective rubber armor/boot with stand and three AA batteries.

Key Features

• 3-way hands-free operation available
• Large easy-to-read screen with back light
• Rugged armor with built-in stand withstand the toughest conditions
• Easy-to-use automatic field calibration ensures accurate readings
• Probes are sold separately

WD-17006-05 InnoCal NIST-Traceable Calibration; 5 to 9 Points, Liquid-in-Glass Thermometer by Oakton

Glass thermometers are one of the most common types of temperature instruments and are available in a variety of styles, sizes, and versions. Their unique characteristics of wide range, precision, repeatability, and quick response create a unique challenge for the metrologist who is calibrating these instruments. InnoCal can calibrate spirit-in-glass (SIG) thermometers. Calibrations for glass thermometers use direct comparison in high-stability liquid baths using Precision Reference Thermometers (PRTs) and Standard Platinum Resistance Thermometers (SPRTs) and high precision displays. The glass thermometers are inspected for cracks and liquid-column separations before testing.

• InnoCal is the only authorized service center for ERTCO brand liquid-in-glass (LIG) thermometers in the United States
• We also calibrate any make and model of LIG thermometers including Brooklyn Thermometer, Miller and Weber, Inc., LSW, and H-B Instruments
• Testing range for liquid-in-glass thermometers is from -80 to 420°C (-176 to 788°F)
• Calibrated at manufacturer's recommended points or at your desired points depending on your specific requirements. Correction factors are also provided for your convenience.

To meet your calibration needs:

• All calibration certificates contain as-found and as-left data, estimated measurement uncertainties (emu's), and test uncertainty ratios (TUR's) at no additional cost!
• This NIST-traceable calibration allows you to confirm that the specific asset you purchase meets the manufacturer's published specification
• EPA, USDA, ISO, and GLP/GMPs standards require regular NIST-Traceable calibration of all test equipment being used in critical applications
• Receive your product calibrated and ready to use rather than sending it to a third-party or internal calibration lab and incurring additional delays

All measurements reported are traceable to SI units via national standards maintained by NIST and performed in compliance with ANSI Z540, ISO17025, and MIL-STD-45662A. FDA Compliant.

InnoCal is accredited to ISO/IEC 17025 by the American Association for Laboratory Accreditation (A2LA) under certificate number 1746.01. This accreditation is your assurance that the calibration is performed in a qualified, controlled laboratory.

Calibrations on glass thermometers are performed using direct comparison in high-stability liquid baths using high-precision PRT's and SPRT's and displays. Thermometers are inspected for cracks and liquid-column separations before testing. Measurements are performed at 5 to 9 points between -197°C and 550°C.

Points are generally selected at the manufacturer's specified points but customer-specified points can be accommodated. For certificates with more calibrations points, see 17006-06 for 10 to 15 points.

WD-90080-00 Tabletop Thermometer with Alarm/Timer by Digi-Sense

Large split LCD simultaneously displays temperature, time and set point

This unit features a timer that counts down from 24 hours. Press keys on stand to easily set temperature set point, time set point and start/stop memory. Alarm chimes each time your preset temperature is reached, and chimes continuously each time your preset time is reached. Once alarm sounds, timer continues to count up to indicate elapsed time from set point.

°F/°C is switch-selectable. Display pivots on stand or collapses flush with stand for convenient storage or wall mounting. Place on desktop or attach to metallic surfaces with two magnets on back. Includes 6.5" long stainless steel probe with 3.5-ft long stainless steel braid over FEP-insulated wire, and battery.

• Includes probe, 4' cable, AAA battery and instruction manual
• Set audible alarm for temperature and time

WD-35625-45 TempTestr® Infrared IR Food Thermometer by Digi-Sense

Ensure your food is at the proper temperature without contamination worries!

Our TempTestr IR Food model is optimized for the food preparation industry. It offers ±1%/1°C (2°F) accuracy in the HACCP critical temperature range of 0 to 60°C (32 to 150°F). This tester s high spectral response lets you take readings through steam. Laser sighting lets you pinpoint your exact target.

• Includes 9V battery, wrist strap and Instruction Manual
• Offers high ±1°C accuracy at HACCP critical temperature ranges
• Infrared temperature measurement provides safe, noncontact readings
• Laser sighting pinpoints your exact target
• °F/°C selectable
• Simple one-handed operation just point and press button! Extremely rapid response time 1/2 second for 95% response

WD-39642-00 Mini TempTestr Infrared Thermometer by Digi-Sense

Economical infrared thermometer fits right in your pocket!

This pocket-size infrared thermometer takes surface temperature readings of any liquid, solid, or semi-solid in less than one second. Operation is simple turn it on, point at sample, and take reading. Noncontact temperature measurements are ideal for food preparation, field use, and for mechanical maintenance and troubleshooting.

Features include switchable °F/°C display, Hold function, selectable auto-off, minimum/maximum memory readings, adjustable emmissivity, wrist strap, flip-open stand, metal carrying case and soft touch keypad.

• Includes metal storage case, wrist strap, spare battery and instruction manual
• Simply point and press for quick accurate readings
• Features minimum/maximum memory readings and Hold function

WD-03316-80 Wall Mount Barometer with Digital Thermometer by Oakton

Digital temperature display with 0.1 ° resolution

Barometer is encased in corrosion-resistant plastic housing. Includes wall mounting bracket, one AA battery, and instructions.

• Includes mounting ring and AA battery
• Dual scale reads barometric pressure in mbar and inches Hg
• Switchable °C/°F readout

WD-35625-10 TempTestr IR with Laser, Infrared Thermometer by Oakton

A price breakthrough in noncontact temperature measurement!

These economical infrared thermometers provide noncontact measurement, so you can measure temperature from a safe distance. Quickly troubleshoot electrical equipment before problem areas create hazards, measure objects too hot to touch, check substances that need to remain contaminant free; measure moving objects ...the possibilities are endless! TempTestr IR features slot for lanyard connection and includes one 9 V battery.

• Infrared temperature measurement provides safe, noncontact readings
• F/C selectable measurment
• Simple one-handed operation... just point and press button!
• Extremely rapid response time- just 500 msec for 95% response
• Model with laser sighting available to pinpoint your exact target

WD-35427-50 Temp 300 Thermocouple Datalogging Thermometer by Oakton

Log up to 2,000 sets of readings in real time with time and date stamp

This Oakton Temp-300 thermometer features real-time datalogging and a USB data output. Meter accepts dual inputs from type J, K, T, E, R, S, N, or B thermocouples probes with miniconnector. This robust and reliable meter works in any environment from the lab to the production floor. Sturdy armored construction protects against knocks and jars. Sealed keypad and ABS plastic case meet IP54 standards for splash resistance. Ergonomically designed housing is ideal for both large and small hands alike.

Large, illuminated display features easy-to-read digits. The seven-button control panel and intuitive on-screen menus guide you in choosing your desired functionality. Additional meter features include Min/Max, Hold, and average functions; temperature units in °F, °C, °R, or K; offset; time tamp/clock; countdown timer; out-of-range alarm with audible/visible indicator; auto shutoff; and low-battery indicator. Order an optional AC adapter to conserve battery life during extended operations.

Manually store or automatically log up to 2000 sets of readings in real time. Log interval is selectable from 1 second to 60 minutes. Take differential temperature measurements with the T1/T2 function. The dot matrix display simultaneously indicates the readings of each probe, as well as the differential reading. For improved readability during rapidly changing temperatures, the meter resolution is keypad selectable. Above 999.9°, the meter automatically switches from 0.1° resolution to 1° resolution, below 99°C the meter autoranges to 1°C resolution.

The Temp-300 thermometer is individually factory calibrated. Automatic field calibration is easily performed for either a single- or dual-point calibration for each probe. Simply place the probe in a container packed with ice, fill with water, activate the calibration function and the meter automatically recognizes the freezing point.

OAKTON s exclusive 3-WAY HANDS-FREE capability allows hands-free operation use the built-in stand on a table top, attach the meter to metal objects through magnets inserted into the armor boot, or hang from a pipe or belt using the hook-and-loop strap. Meter comes standard with the integral stand; the hands-free option adds magnets and strap (order separately).

• Includes AA batteries (3) and instructions
• 3-way hands-free operation
• Transfer data via USB
• Menu driven set up to easily customize your meter
• Rugged armor built to withstand the toughest conditions
• Easy-to-use automatic field calibration ensures accurate readings
• Probes are sold separately

WD-17002-06 InnoCal NIST-Traceable Calibration, Thermistor Thermometer System Meter+Probe by Oakton

Regardless of the type of thermometry probe your application requires, InnoCal can ensure the accuracy of your meter, probe, or system!

All measurements reported are traceable to SI units via national standards maintained by NIST and performed in compliance with ANSI Z540, ISO17025 and MIL-STD-45662A. See the sample certificate under the "More Info" section to see how InnoCal's certificates provide more information in a concise manner than the rest of the industry.

InnoCal is accredited to ISO/IEC 17025 by the American Association for Laboratory Accreditation (A2LA) under certificate number 1746.01. This accreditation is your assurance that the calibration is performed in a qualified, controlled laboratory which is technically proficient and committed to quality and customer-focused continuous improvement. Our scope of A2LA accreditation can be found under the "More Info" section.

Calibrations on temperature systems (meter and probe) are performed using direct comparison in high-stability liquid using high-precision and SPRT's and displays. Measurements can be performed at four points between -196 and 1300°C. Points are generally selected at standard ITS-90 points across the range of the probe but customer-specified points can be accommodated. Calibrating the probe and meter together produces the highest accuracies.

• NIST-traceable calibration allows you to confirm that the specific asset you purchase does in fact meet the manufacturer's published specification EPA, USDA, ISO and GLP/GMPs standards require regular NIST-Traceable calibration of all test equipment being used in critical applications
• Receive your product calibrated and ready to use rather than sending it to a third-party or internal calibration lab and incurring additional delays
• For Thermistors only
• Calibration report is for both the meter and probe
• Calibration of the meter and probe is preferred over calibrating the meter and probe separately

WD-98768-09 Data-Logger for Traceable® Dual-Input/Output Thermocouple Thermometer by Oakton

This data logger is complete DAS-4™ System captures and stores up to 8000 bytes - over 1000 readings. The readings may be taken at intervals from 1 second to 99 hours.

Traceable® Products have an individually-numbered Traceable® Certificate provided with each unit, that assures accuracy from our ISO/IEC 17025:2005(1750.01) calibration laboratory accredited by A2LA. It indicates traceability of measurements to the SI units through NIST or other recognized national measurement institutes (NMI) that are signatories to the CIPM Mutual Recognition Agreement. Each product goes through an intense vetting process before it can carry the Traceable name, thus saving you both time and money by not having to calibrate separately.

Record data - even if you're away from your PC

• For use with Traceable® meters featuring computer output
• Includes NIST-Traceable certificate from our A2LA accredited (1750.01) calibration laboratory

Includes

CD, 3-foot cable - USB, serial, and instrument connections, and batteries.

WD-39643-00 Digi-Sense Palm-Sized Infrared Thermometer by Digi-Sense

Laser sighting and adjustable emissivity at an economical price

This infrared thermometer provides quick and accurate temperature measurements. View the current temperature, temperature scale (°F or °C), and battery life icon on the large LCD. Two battery compartments provide power to the thermometer and laser separately.

This gives the flexibility to measure temperature without the laser sighting if the laser battery is weak. Other features include selectable °F/°C, min/max measurements, lock function for continuous monitoring, automatic data hold, auto off, and battery life icon.

• Includes CR2032 batteries (2)
• Compact, ergonomic design provides a comfortable fit during use
• Fits perfectly in your hand or pocket

WD-90003-00 Min-Max Memory Thermometer by Digi-Sense

Pocket sized thermometer recalls minimum and maximum temperature with a button press!

This inexpensive min-max memory thermometer features a 31/2 digit, 0.3" high LCD display. Dimensions: Probe: 4.3"L x 0.14" dia. Head: 1.8" dia.

• Water resistant housing
• Heat-resistant, stainless steel penetration probe
• °C/°F selectable
• Includes plastic protective sleeve with pocket clip for easy transportation and storage

WD-35625-40 Food Safety Infrared IR Thermometer by Digi-Sense

A combination contact/noncontact thermometer for all food applications

Check critical food temperatures and monitor HACCP food safety zones with this combination contact/noncontact thermometer. LED s rapidly indicate if food temperature is in the bacterial growth safety zone. Green lights indicate safe temperatures below 40°F (4°C) and above 140°F (60°C). Red light indicates the HACCP danger zone between 40 to 140°F (4 to 60°C). The contact probe swings out for internal temperature checks, then folds in for storage. IR mode provides quick, noncontact surface measurements and stores maximum reading. Target illumination indicates target measurement area and is ideal for close working distances of 2 to 12 . Countdown timer with alarm monitors cooking and cooling intervals and HACCP exposure times set countdown timer to a maximum of 8 hours.

• Go/no-go LEDs provide quick check of HACCP food zones
• Sealed IP54 housing make for easy cleaning

WD-35700-00 Wall Mount Thermo-Hygrometer with Digital Thermometer by Digi-Sense

Features a digital, °F/°C selectable thermometer

Monitor both the humidity and temperature of your office, laboratory, greenhouse, food storage or computer room. This thermohygrometer remains accurate and stable without maintenance or adjustments. Analog humidity display; 1/2"H LCD temperature display with F or C readout. Supplied with one AA 1.5 V battery, corrosion-resistant plastic case, mounting bracket, and instructions.

• Monitor humidity and temperature
• Digital temperature display with 0.1 degree resolution

WD-35625-41 Economic 2-in-1 Food Safety IR Thermometer by Digi-Sense

A combination contact/noncontact thermometer for all food applications

Check critical food temperatures and monitor HACCP food safety zones with this combination contact/noncontact thermometer. LED s rapidly indicate if food temperature is in the bacterial growth safety zone. Green lights indicate safe temperatures below 40°F (4°C) and above 140°F (60°C). Red light indicates the HACCP danger zone between 40 to 140°F (4 to 60°C). The contact probe swings out for internal temperature checks, then folds in for storage. IR mode provides quick, noncontact surface measurements and stores maximum reading. Target illumination indicates target measurement area and is ideal for close working distances of 2 to 12 . Countdown timer with alarm monitors cooking and cooling intervals and HACCP exposure times set countdown timer to a maximum of 8 hours.

• Go/no-go LEDs provide quick check of HACCP food zones
• Sealed IP54 housing make for easy cleaning

WD-17004-00 InnoCal NIST-Traceable Calibration; IR (Infrared) Thermometer by Oakton

• Testing range from -12 to 500°C (10 to 932°F)
• NIST-traceable infrared calibrations performed by using black-body calibration sources with defined emissivities