Multirae O2 Sensor

008-0917-000 Calibration Kit for MultiRAE IR Monitor Equipped with LEL / O2 / CO2 / CO Sensors and IAQRAE Monitors Equipped with CO2 / CO Sensors by RAE Systems

Kit includes

• One 34L cylinder
• Four-gas calibration mix (50% LEL, 20.9% O₂, 50 ppm CO, 5,000 ppm CO₂, bal. N₂)
• One 34L cylinder N₂ zero gas
• One constant-flow regulator (male) with adapter and tubing
• 2-Cylinder hard plastic carry case

008-3001-000 MultiRAE Plus Calibration Kit by RAE Systems

Kit includes

• Four-Gas Calibration Gas, 58L cylinder (Cal gas contains 50% LEL methane, 20.9% oxygen, 25 ppm hydrogen sulfide, 50 ppm carbon monoxide, balance nitrogen) C-10 regulator
• Isobutylene, 100 ppm (balance air), 34L cylinder, CGA-600 regulator
• Constant-flow regulators (two) and calibration adapter
• 2-cylinder hard plastic carry case

Note: Use only for monitors equipped with O₂ / LEL / CO / H₂S / PID sensors

MultiRAE IR One-to-Five Sensor NDIR CO₂ and PID Personal Protection Gas Monitor by RAE Systems

The MultiRAE IR combines a PID (Photoionization Detector) and Carbon Dioxide (CO₂) sensor with O₂, LEL, and one specific toxic gas sensor in one compact monitor with sampling pump. The MultiRAE IRs versatility allows it to replace a wide range of monitors, saving training and maintenance costs. The MultiRAE IR is quickly and easily changed from a sophisticated technician instrument to a simple text or display only monitor. The same monitor can be used as a personal monitor, a hand-held sniffer or as a continuous, operational area monitor for use in applications such as indoor air quality and industrial hygiene.

Monitor only includes

• Shipping case
• Monitor
• Datalogging: Software, ProRAE Suite Package for Windows™ 95, 98, 2000, NT, ME & XP and Computer Interface cable
• Sensors (as specified)
• Calibration adapter
• Operation and maintenance manual
• Rubber boot with belt clip
• Rechargeable Lithium-ion battery pack
• Universal AC/DC Wall Adapter with international plug kit
• Alkaline battery adapter
• external filters
• 3" inlet probe
• External filter adapter

Monitor with accessories kit also includes

• Hard transport case with pre-cut foam
• 15' (5 m) Teflon® tubing
• Tool kit

Optional calibration kit also includes

• Four-gas mix in a 34L cylinder: CH4 50% LEL, 20.9% O2, 50 ppm CO, 5,000 ppm CO2, balance N2
• N2 zero gas for non-PID equipped kits
• Isobutylene gas in a 34L cylinder (for units with PID) (doubles as CO2 zero gas)
• Calibration Regulator (male) and tubing

Key Features

• O2, LEL, PID, CO2, and any plug-in smart toxic sensors: CO, H2S, SO2, NO, NO2, Cl2, HCN, NH3, PH3
• 0-20,000 ppm measurement of CO2 using our patented non-dispersive infrared (NDIR) sensor
• 0-2,000 ppm measurement of VOCs (volatile organic compounds) with 0.1 ppm resolution
• Measure more chemicals than with any other PID: With over 60 Correction Factors built into the MultiRAE IR memory and the largest printed list of Correction Factors in the world (300+), RAE Systems offers the ability to accurately measure more ionizable chemicals than any other PID!
• Drop-in Battery: When work schedules require putting in more than the 12 hours supplied by the advanced Lithium-ion (Li-ion) battery, the drop in alkaline pack supplied with every MultiRAE IR allows you to finish the job.
• User friendly screens make it easy to use for simple applications and flexible enough for sophisticated options.
• Rugged Rubber Boot: The standard rubber boot helps assure that the MultiRAE IR survives the bumps and knocks of tough field use.
• Strong, built-in sample pump draws up to 100 (30m) horizontally or vertically. Liquid trap and automatic low flow alarm protect the MultiRAE IR from damage.
• Large keys are operable even with 3 layers of gloves
• Easy-to-read display with backlight
• Store up to 80 hours of data at one minute interval for all 5 sensors for download to PC (with the optional datalogging).
• Loud audible alarm that varies for different alarm conditions and an optional external vibration alarm for noisy areas

Applications

• Indoor Air Quality
• Beverage and Brewery
• Food Industry
• Hospitals
• Respirable Breathing Air Testing

MCB3-A3C112E-020 MULTIRAE PRO,CSA.PGM-6248.10.6EV, 2000PPM.LEL.H2S (0.1-100 PPM).CO (0-500 PPM).O2.NON-WIRELESS.LI-ION BAT. W/ ALK. ADP..MONITOR ONLY by RAE Systems

The MultiRAE Pro is the industry's only portable wireless multithreat monitor. The MultiRAE Pro's ability to simultaneously detect gamma radiation and toxic industrial chemicals (TICs/TIMs) enables responders to reduce the equipment footprint and achieve greater agility when operating downrange.

The MultiRAE Pro's optional wireless capability improves safety by providing commanders and safety officers real-time access to instrument readings and alarm status from any location for better situational awareness and faster incident response.

Key Features

• All-in-one monitoring capabilities for radiation, VOCs, oxygen, toxic and combustible gases, up to 6 threat types at a time
• Over 25 interchangeable sensor options, including parts-per-billion PID and gamma radiation
• Wireless access to real-time instrument readings and alarm status from any location
• Unmistakable five-way local and remote wireless notification of alarm conditions
• Intelligent sensors store calibration data, so they can be swapped in the field
• Large graphical display with easy-to-use, icon-driven user interface

Applications

• Civil defense (search and rescue)
• Homeland security
• HazMat response
• Military
• Semiconductor manufacturing
• Environmental

MCB3-A4C112E-423 MultiRAE Pro/ CSA/ Pump/ 9.8e.V, LEL, H2S, CO, O2/ 900 MHz/ Rechargeable batt/ Benzene KIT by RAE Systems

The MultiRAE Pro is the industry's only portable wireless multithreat monitor. The MultiRAE Pro's ability to simultaneously detect gamma radiation and toxic industrial chemicals (TICs/TIMs) enables responders to reduce the equipment footprint and achieve greater agility when operating downrange.

The MultiRAE Pro's optional wireless capability improves safety by providing commanders and safety officers real-time access to instrument readings and alarm status from any location for better situational awareness and faster incident response.

Key Features

• All-in-one monitoring capabilities for radiation, VOCs, oxygen, toxic and combustible gases, up to 6 threat types at a time
• Over 25 interchangeable sensor options, including parts-per-billion PID and gamma radiation
• Wireless access to real-time instrument readings and alarm status from any location
• Unmistakable five-way local and remote wireless notification of alarm conditions
• Intelligent sensors store calibration data, so they can be swapped in the field
• Large graphical display with easy-to-use, icon-driven user interface

Applications

• Civil defense (search and rescue)
• Homeland security
• HazMat response
• Military
• Semiconductor manufacturing
• Environmental

MBB3-A1C112E-020 MultiRAE Pumped Portable Multi-gas Monitor - 10.6 eV PID / LEL / H2S / CO / O2 / Li-ion / Non-Wireless by RAE Systems

The MultiRAE is the most advanced portable chemical detector on the market. The MultiRAE delivers the broadest PID sensor range in its class and the versatility to support 25 intelligent interchangeable sensor options (such as PID, NDIR for combustibles and CO2, ammonia, chlorine, formaldehyde, and phosphine) to fully meet the monitoring needs in a variety of applications, including industrial hygiene, personal protection, leak detection, and HazMat response.

The MultiRAE's optional wireless capability improves safety by providing commanders and safety officers real-time access to instrument readings and alarm status from any location for better situational awareness and faster incident response.

Key Features

• Wireless access to real-time instrument readings and alarm status from any location
• Unmistakable five-way local and remote wireless notification of alarm conditions including Man Down Alarm
• Intelligent sensors store calibration data, so they can be swapped in the field
• Extensive on-board gas libraries (190 VOCs and 55 combustible gases)
• Largest display in its class
• Continuous datalogging (6 months for 5 sensors, 24x7)

Applications

• Aviation (wing tank entry)
• Chemical
• Environmental
• Oil and gas
• Pharmaceutical
• Shipping / marine
• HazMat response
• Clandestine drug labs

MBB3-A1C112E-420 MultiRAE Pumped Portable Multi-gas Monitor - 10.6 eV PID / LEL / H2S / CO / O2 / Li-ion / Wireless by RAE Systems

The MultiRAE is the most advanced portable chemical detector on the market. The MultiRAE delivers the broadest PID sensor range in its class and the versatility to support 25 intelligent interchangeable sensor options (such as PID, NDIR for combustibles and CO2, ammonia, chlorine, formaldehyde, and phosphine) to fully meet the monitoring needs in a variety of applications, including industrial hygiene, personal protection, leak detection, and HazMat response.

The MultiRAE's optional wireless capability improves safety by providing commanders and safety officers real-time access to instrument readings and alarm status from any location for better situational awareness and faster incident response.

Key Features

• Wireless access to real-time instrument readings and alarm status from any location
• Unmistakable five-way local and remote wireless notification of alarm conditions including Man Down Alarm
• Intelligent sensors store calibration data, so they can be swapped in the field
• Extensive on-board gas libraries (190 VOCs and 55 combustible gases)
• Largest display in its class
• Continuous datalogging (6 months for 5 sensors, 24x7)

Applications

• Aviation (wing tank entry)
• Chemical
• Environmental
• Oil and gas
• Pharmaceutical
• Shipping / marine
• HazMat response
• Clandestine drug labs

MBB3-A1C1R3E-020 MultiRAE Pumped Portable Multi-gas Monitor - 10.6 eV PID / LEL / CO + H2S / SO2 / O2 / Li-ion / Non-Wireless by RAE Systems

The MultiRAE is the most advanced portable chemical detector on the market. The MultiRAE delivers the broadest PID sensor range in its class and the versatility to support 25 intelligent interchangeable sensor options (such as PID, NDIR for combustibles and CO2, ammonia, chlorine, formaldehyde, and phosphine) to fully meet the monitoring needs in a variety of applications, including industrial hygiene, personal protection, leak detection, and HazMat response.

The MultiRAE's optional wireless capability improves safety by providing commanders and safety officers real-time access to instrument readings and alarm status from any location for better situational awareness and faster incident response.

Key Features

• Wireless access to real-time instrument readings and alarm status from any location
• Unmistakable five-way local and remote wireless notification of alarm conditions including Man Down Alarm
• Intelligent sensors store calibration data, so they can be swapped in the field
• Extensive on-board gas libraries (190 VOCs and 55 combustible gases)
• Largest display in its class
• Continuous datalogging (6 months for 5 sensors, 24x7)

Applications

• Aviation (wing tank entry)
• Chemical
• Environmental
• Oil and gas
• Pharmaceutical
• Shipping / marine
• HazMat response
• Clandestine drug labs

MBB3-A1C1R3E-420 MultiRAE Pumped Portable Multi-gas Monitor - 10.6 eV PID / LEL / CO + H2S / SO2 / O2 / Li-ion / Wireless by RAE Systems

The MultiRAE is the most advanced portable chemical detector on the market. The MultiRAE delivers the broadest PID sensor range in its class and the versatility to support 25 intelligent interchangeable sensor options (such as PID, NDIR for combustibles and CO2, ammonia, chlorine, formaldehyde, and phosphine) to fully meet the monitoring needs in a variety of applications, including industrial hygiene, personal protection, leak detection, and HazMat response.

The MultiRAE's optional wireless capability improves safety by providing commanders and safety officers real-time access to instrument readings and alarm status from any location for better situational awareness and faster incident response.

Key Features

• Wireless access to real-time instrument readings and alarm status from any location
• Unmistakable five-way local and remote wireless notification of alarm conditions including Man Down Alarm
• Intelligent sensors store calibration data, so they can be swapped in the field
• Extensive on-board gas libraries (190 VOCs and 55 combustible gases)
• Largest display in its class
• Continuous datalogging (6 months for 5 sensors, 24x7)

Applications

• Aviation (wing tank entry)
• Chemical
• Environmental
• Oil and gas
• Pharmaceutical
• Shipping / marine
• HazMat response
• Clandestine drug labs

MBB3-A1C112E-020 MultiRAE Pumped Portable Multi-gas Monitor - 10.6 eV PID / LEL / H2S / CO / O2 / Li-ion / Non-Wireless by RAE Systems

The MultiRAE is the most advanced portable chemical detector on the market. The MultiRAE delivers the broadest PID sensor range in its class and the versatility to support 25 intelligent interchangeable sensor options (such as PID, NDIR for combustibles and CO2, ammonia, chlorine, formaldehyde, and phosphine) to fully meet the monitoring needs in a variety of applications, including industrial hygiene, personal protection, leak detection, and HazMat response.

The MultiRAE's optional wireless capability improves safety by providing commanders and safety officers real-time access to instrument readings and alarm status from any location for better situational awareness and faster incident response.

Key Features

• Wireless access to real-time instrument readings and alarm status from any location
• Unmistakable five-way local and remote wireless notification of alarm conditions including Man Down Alarm
• Intelligent sensors store calibration data, so they can be swapped in the field
• Extensive on-board gas libraries (190 VOCs and 55 combustible gases)
• Largest display in its class
• Continuous datalogging (6 months for 5 sensors, 24x7)

Applications

• Aviation (wing tank entry)
• Chemical
• Environmental
• Oil and gas
• Pharmaceutical
• Shipping / marine
• HazMat response
• Clandestine drug labs

MBB3-A1C112E-030 MultiRAE Pumped Portable Multi-gas Monitor - 10.6 eV PID / LEL / H2S / CO / O2 / Alkaline / Non-Wireless by RAE Systems

The MultiRAE is the most advanced portable chemical detector on the market. The MultiRAE delivers the broadest PID sensor range in its class and the versatility to support 25 intelligent interchangeable sensor options (such as PID, NDIR for combustibles and CO2, ammonia, chlorine, formaldehyde, and phosphine) to fully meet the monitoring needs in a variety of applications, including industrial hygiene, personal protection, leak detection, and HazMat response.

The MultiRAE's optional wireless capability improves safety by providing commanders and safety officers real-time access to instrument readings and alarm status from any location for better situational awareness and faster incident response.

Key Features

• Wireless access to real-time instrument readings and alarm status from any location
• Unmistakable five-way local and remote wireless notification of alarm conditions including Man Down Alarm
• Intelligent sensors store calibration data, so they can be swapped in the field
• Extensive on-board gas libraries (190 VOCs and 55 combustible gases)
• Largest display in its class
• Continuous datalogging (6 months for 5 sensors, 24x7)

Applications

• Aviation (wing tank entry)
• Chemical
• Environmental
• Oil and gas
• Pharmaceutical
• Shipping / marine
• HazMat response
• Clandestine drug labs

MBB3-A1C112E-420 MultiRAE Pumped Portable Multi-gas Monitor - 10.6 eV PID / LEL / H2S / CO / O2 / Li-ion / Wireless by RAE Systems

The MultiRAE is the most advanced portable chemical detector on the market. The MultiRAE delivers the broadest PID sensor range in its class and the versatility to support 25 intelligent interchangeable sensor options (such as PID, NDIR for combustibles and CO2, ammonia, chlorine, formaldehyde, and phosphine) to fully meet the monitoring needs in a variety of applications, including industrial hygiene, personal protection, leak detection, and HazMat response.

The MultiRAE's optional wireless capability improves safety by providing commanders and safety officers real-time access to instrument readings and alarm status from any location for better situational awareness and faster incident response.

Key Features

• Wireless access to real-time instrument readings and alarm status from any location
• Unmistakable five-way local and remote wireless notification of alarm conditions including Man Down Alarm
• Intelligent sensors store calibration data, so they can be swapped in the field
• Extensive on-board gas libraries (190 VOCs and 55 combustible gases)
• Largest display in its class
• Continuous datalogging (6 months for 5 sensors, 24x7)

Applications

• Aviation (wing tank entry)
• Chemical
• Environmental
• Oil and gas
• Pharmaceutical
• Shipping / marine
• HazMat response
• Clandestine drug labs

MBB3-A1C1R3E-020 MultiRAE Pumped Portable Multi-gas Monitor - 10.6 eV PID / LEL / CO + H2S / SO2 / O2 / Li-ion / Non-Wireless by RAE Systems

The MultiRAE is the most advanced portable chemical detector on the market. The MultiRAE delivers the broadest PID sensor range in its class and the versatility to support 25 intelligent interchangeable sensor options (such as PID, NDIR for combustibles and CO2, ammonia, chlorine, formaldehyde, and phosphine) to fully meet the monitoring needs in a variety of applications, including industrial hygiene, personal protection, leak detection, and HazMat response.

The MultiRAE's optional wireless capability improves safety by providing commanders and safety officers real-time access to instrument readings and alarm status from any location for better situational awareness and faster incident response.

Key Features

• Wireless access to real-time instrument readings and alarm status from any location
• Unmistakable five-way local and remote wireless notification of alarm conditions including Man Down Alarm
• Intelligent sensors store calibration data, so they can be swapped in the field
• Extensive on-board gas libraries (190 VOCs and 55 combustible gases)
• Largest display in its class
• Continuous datalogging (6 months for 5 sensors, 24x7)

Applications

• Aviation (wing tank entry)
• Chemical
• Environmental
• Oil and gas
• Pharmaceutical
• Shipping / marine
• HazMat response
• Clandestine drug labs

MBB3-A1C1R3E-420 MultiRAE Pumped Portable Multi-gas Monitor - 10.6 eV PID / LEL / CO + H2S / SO2 / O2 / Li-ion / Wireless by RAE Systems

The MultiRAE is the most advanced portable chemical detector on the market. The MultiRAE delivers the broadest PID sensor range in its class and the versatility to support 25 intelligent interchangeable sensor options (such as PID, NDIR for combustibles and CO2, ammonia, chlorine, formaldehyde, and phosphine) to fully meet the monitoring needs in a variety of applications, including industrial hygiene, personal protection, leak detection, and HazMat response.

The MultiRAE's optional wireless capability improves safety by providing commanders and safety officers real-time access to instrument readings and alarm status from any location for better situational awareness and faster incident response.

Key Features

• Wireless access to real-time instrument readings and alarm status from any location
• Unmistakable five-way local and remote wireless notification of alarm conditions including Man Down Alarm
• Intelligent sensors store calibration data, so they can be swapped in the field
• Extensive on-board gas libraries (190 VOCs and 55 combustible gases)
• Largest display in its class
• Continuous datalogging (6 months for 5 sensors, 24x7)

Applications

• Aviation (wing tank entry)
• Chemical
• Environmental
• Oil and gas
• Pharmaceutical
• Shipping / marine
• HazMat response
• Clandestine drug labs

MCB3-A3C168E-020 MultiRAE Pro Pumped Portable Multi-gas Monitors - 10.6 eV ppb PID / LEL / Cl2 / NH3 / O2 / Li-ion / Non-Wireless by RAE Systems

The MultiRAE Pro is the industry's only portable wireless multithreat monitor. The MultiRAE Pro's ability to simultaneously detect gamma radiation and toxic industrial chemicals (TICs/TIMs) enables responders to reduce the equipment footprint and achieve greater agility when operating downrange.

The MultiRAE Pro's optional wireless capability improves safety by providing commanders and safety officers real-time access to instrument readings and alarm status from any location for better situational awareness and faster incident response.

Key Features

• All-in-one monitoring capabilities for radiation, VOCs, oxygen, toxic and combustible gases, up to 6 threat types at a time
• Over 25 interchangeable sensor options, including parts-per-billion PID and gamma radiation
• Wireless access to real-time instrument readings and alarm status from any location
• Unmistakable five-way local and remote wireless notification of alarm conditions
• Intelligent sensors store calibration data, so they can be swapped in the field
• Large graphical display with easy-to-use, icon-driven user interface

Applications

• Civil defense (search and rescue)
• Homeland security
• HazMat response
• Military
• Semiconductor manufacturing
• Environmental

MCB3-A3C168E-420 MultiRAE Pro Pumped Portable Multi-gas Monitors - 10.6 eV ppb PID / LEL / Cl2 / NH3 / O2 / Li-ion / Wireless by RAE Systems

The MultiRAE Pro is the industry's only portable wireless multithreat monitor. The MultiRAE Pro's ability to simultaneously detect gamma radiation and toxic industrial chemicals (TICs/TIMs) enables responders to reduce the equipment footprint and achieve greater agility when operating downrange.

The MultiRAE Pro's optional wireless capability improves safety by providing commanders and safety officers real-time access to instrument readings and alarm status from any location for better situational awareness and faster incident response.

Key Features

• All-in-one monitoring capabilities for radiation, VOCs, oxygen, toxic and combustible gases, up to 6 threat types at a time
• Over 25 interchangeable sensor options, including parts-per-billion PID and gamma radiation
• Wireless access to real-time instrument readings and alarm status from any location
• Unmistakable five-way local and remote wireless notification of alarm conditions
• Intelligent sensors store calibration data, so they can be swapped in the field
• Large graphical display with easy-to-use, icon-driven user interface

Applications

• Civil defense (search and rescue)
• Homeland security
• HazMat response
• Military
• Semiconductor manufacturing
• Environmental

MCB3-A3C168E-020 MultiRAE Pro Pumped Portable Multi-gas Monitors - 10.6 eV ppb PID / LEL / Cl2 / NH3 / O2 / Li-ion / Non-Wireless by RAE Systems

The MultiRAE Pro is the industry's only portable wireless multithreat monitor. The MultiRAE Pro's ability to simultaneously detect gamma radiation and toxic industrial chemicals (TICs/TIMs) enables responders to reduce the equipment footprint and achieve greater agility when operating downrange.

The MultiRAE Pro's optional wireless capability improves safety by providing commanders and safety officers real-time access to instrument readings and alarm status from any location for better situational awareness and faster incident response.

Key Features

• All-in-one monitoring capabilities for radiation, VOCs, oxygen, toxic and combustible gases, up to 6 threat types at a time
• Over 25 interchangeable sensor options, including parts-per-billion PID and gamma radiation
• Wireless access to real-time instrument readings and alarm status from any location
• Unmistakable five-way local and remote wireless notification of alarm conditions
• Intelligent sensors store calibration data, so they can be swapped in the field
• Large graphical display with easy-to-use, icon-driven user interface

Applications

• Civil defense (search and rescue)
• Homeland security
• HazMat response
• Military
• Semiconductor manufacturing
• Environmental

MCB3-A3C168E-420 MultiRAE Pro Pumped Portable Multi-gas Monitors - 10.6 eV ppb PID / LEL / Cl2 / NH3 / O2 / Li-ion / Wireless by RAE Systems

The MultiRAE Pro is the industry's only portable wireless multithreat monitor. The MultiRAE Pro's ability to simultaneously detect gamma radiation and toxic industrial chemicals (TICs/TIMs) enables responders to reduce the equipment footprint and achieve greater agility when operating downrange.

The MultiRAE Pro's optional wireless capability improves safety by providing commanders and safety officers real-time access to instrument readings and alarm status from any location for better situational awareness and faster incident response.

Key Features

• All-in-one monitoring capabilities for radiation, VOCs, oxygen, toxic and combustible gases, up to 6 threat types at a time
• Over 25 interchangeable sensor options, including parts-per-billion PID and gamma radiation
• Wireless access to real-time instrument readings and alarm status from any location
• Unmistakable five-way local and remote wireless notification of alarm conditions
• Intelligent sensors store calibration data, so they can be swapped in the field
• Large graphical display with easy-to-use, icon-driven user interface

Applications

• Civil defense (search and rescue)
• Homeland security
• HazMat response
• Military
• Semiconductor manufacturing
• Environmental

MAB3-0EC1123-020 MultiRAE Lite Pumped Portable Multi-gas Monitor - O2 / LEL / H2S / CO / SO2 / Li-ion / Non-Wireless by RAE Systems

The MultiRAE Lite is the optimal one-to-six1-gas monitor for personal protection and leak detection applications. The MultiRAE Lite is available in pumped and diffusion versions and features the broadest selection of sensor options in its class. The MultiRAE Lite can be configured to exactly meet the detection needs and compliance requirements of various countries, industries, and applications.

The MultiRAE Lite's optional wireless capability improves safety by providing commanders and safety officers real-time access to instrument readings and alarm status from any location for better situational awareness and faster incident response.

Key Features

• Wireless access to real-time instrument readings and alarm status from any location
• Unmistakable five-way local and remote wireless notification of alarm conditions including Man Down Alarm
• Over 25 interchangeable sensor options, including PID for VOCs, NDIR and catalytic for combustibles, and NDIR for CO₂
• Intelligent sensors store calibration data, so they can be swapped in the field
• Large graphical display with easy-to-use, icon-driven user interface
• Continuous datalogging (6 months for 5 sensors, 24x7)

Applications

• Chemical
• Food and beverage
• Oil and gas (downstream)
• Pharmaceutical
• Telecommunications
• Wastewater treatment
• Fire overhaul

MAB3-0EC1123-420 MultiRAE Lite Pumped Portable Multi-gas Monitor - O2 / LEL / H2S / CO / SO2 / Li-ion / Wireless by RAE Systems

The MultiRAE Lite is the optimal one-to-six1-gas monitor for personal protection and leak detection applications. The MultiRAE Lite is available in pumped and diffusion versions and features the broadest selection of sensor options in its class. The MultiRAE Lite can be configured to exactly meet the detection needs and compliance requirements of various countries, industries, and applications.

The MultiRAE Lite's optional wireless capability improves safety by providing commanders and safety officers real-time access to instrument readings and alarm status from any location for better situational awareness and faster incident response.

Key Features

• Wireless access to real-time instrument readings and alarm status from any location
• Unmistakable five-way local and remote wireless notification of alarm conditions including Man Down Alarm
• Over 25 interchangeable sensor options, including PID for VOCs, NDIR and catalytic for combustibles, and NDIR for CO₂
• Intelligent sensors store calibration data, so they can be swapped in the field
• Large graphical display with easy-to-use, icon-driven user interface
• Continuous datalogging (6 months for 5 sensors, 24x7)

Applications

• Chemical
• Food and beverage
• Oil and gas (downstream)
• Pharmaceutical
• Telecommunications
• Wastewater treatment
• Fire overhaul

MAB3-A2C112E-020 MultiRAE Lite Pumped Portable Multi-gas Monitor - 10.6 eV PID / LEL / H2S / CO / O2 / Li-ion / Non-Wireless by RAE Systems

The MultiRAE Lite is the optimal one-to-six1-gas monitor for personal protection and leak detection applications. The MultiRAE Lite is available in pumped and diffusion versions and features the broadest selection of sensor options in its class. The MultiRAE Lite can be configured to exactly meet the detection needs and compliance requirements of various countries, industries, and applications.

The MultiRAE Lite's optional wireless capability improves safety by providing commanders and safety officers real-time access to instrument readings and alarm status from any location for better situational awareness and faster incident response.

Key Features

• Wireless access to real-time instrument readings and alarm status from any location
• Unmistakable five-way local and remote wireless notification of alarm conditions including Man Down Alarm
• Over 25 interchangeable sensor options, including PID for VOCs, NDIR and catalytic for combustibles, and NDIR for CO₂
• Intelligent sensors store calibration data, so they can be swapped in the field
• Large graphical display with easy-to-use, icon-driven user interface
• Continuous datalogging (6 months for 5 sensors, 24x7)

Applications

• Chemical
• Food and beverage
• Oil and gas (downstream)
• Pharmaceutical
• Telecommunications
• Wastewater treatment
• Fire overhaul

MAB3-A2C112E-420 MultiRAE Lite Pumped Portable Multi-gas Monitor - 10.6 eV PID / LEL / H2S / CO / O2 / Li-ion / Wireless by RAE Systems

The MultiRAE Lite is the optimal one-to-six1-gas monitor for personal protection and leak detection applications. The MultiRAE Lite is available in pumped and diffusion versions and features the broadest selection of sensor options in its class. The MultiRAE Lite can be configured to exactly meet the detection needs and compliance requirements of various countries, industries, and applications.

The MultiRAE Lite's optional wireless capability improves safety by providing commanders and safety officers real-time access to instrument readings and alarm status from any location for better situational awareness and faster incident response.

Key Features

• Wireless access to real-time instrument readings and alarm status from any location
• Unmistakable five-way local and remote wireless notification of alarm conditions including Man Down Alarm
• Over 25 interchangeable sensor options, including PID for VOCs, NDIR and catalytic for combustibles, and NDIR for CO₂
• Intelligent sensors store calibration data, so they can be swapped in the field
• Large graphical display with easy-to-use, icon-driven user interface
• Continuous datalogging (6 months for 5 sensors, 24x7)

Applications

• Chemical
• Food and beverage
• Oil and gas (downstream)
• Pharmaceutical
• Telecommunications
• Wastewater treatment
• Fire overhaul

MAB3-A2C1R3E-020 MultiRAE Lite Pumped Portable Multi-gas Monitor - 10.6 eV PID / LEL / CO + H2S / SO2 / O2 / Li-ion / Non-Wireless by RAE Systems

The MultiRAE Lite is the optimal one-to-six1-gas monitor for personal protection and leak detection applications. The MultiRAE Lite is available in pumped and diffusion versions and features the broadest selection of sensor options in its class. The MultiRAE Lite can be configured to exactly meet the detection needs and compliance requirements of various countries, industries, and applications.

The MultiRAE Lite's optional wireless capability improves safety by providing commanders and safety officers real-time access to instrument readings and alarm status from any location for better situational awareness and faster incident response.

Key Features

• Wireless access to real-time instrument readings and alarm status from any location
• Unmistakable five-way local and remote wireless notification of alarm conditions including Man Down Alarm
• Over 25 interchangeable sensor options, including PID for VOCs, NDIR and catalytic for combustibles, and NDIR for CO₂
• Intelligent sensors store calibration data, so they can be swapped in the field
• Large graphical display with easy-to-use, icon-driven user interface
• Continuous datalogging (6 months for 5 sensors, 24x7)

Applications

• Chemical
• Food and beverage
• Oil and gas (downstream)
• Pharmaceutical
• Telecommunications
• Wastewater treatment
• Fire overhaul

MAB3-A2C1R3E-420 MultiRAE Lite Pumped Portable Multi-gas Monitor - 10.6 eV PID / LEL / CO + H2S / SO2 / O2 / Li-ion / Wireless by RAE Systems

The MultiRAE Lite is the optimal one-to-six1-gas monitor for personal protection and leak detection applications. The MultiRAE Lite is available in pumped and diffusion versions and features the broadest selection of sensor options in its class. The MultiRAE Lite can be configured to exactly meet the detection needs and compliance requirements of various countries, industries, and applications.

The MultiRAE Lite's optional wireless capability improves safety by providing commanders and safety officers real-time access to instrument readings and alarm status from any location for better situational awareness and faster incident response.

Key Features

• Wireless access to real-time instrument readings and alarm status from any location
• Unmistakable five-way local and remote wireless notification of alarm conditions including Man Down Alarm
• Over 25 interchangeable sensor options, including PID for VOCs, NDIR and catalytic for combustibles, and NDIR for CO₂
• Intelligent sensors store calibration data, so they can be swapped in the field
• Large graphical display with easy-to-use, icon-driven user interface
• Continuous datalogging (6 months for 5 sensors, 24x7)

Applications

• Chemical
• Food and beverage
• Oil and gas (downstream)
• Pharmaceutical
• Telecommunications
• Wastewater treatment
• Fire overhaul