Modern Water Pcb Kit

TK6245-Z Boiler Water Combination Kit by AquaPhoenix

This Boiler Water Combination Test Kit combines 5 common test parameters into one, easy-to-use combination test kit. The kit is packaged in a durable plastic case with handle for easy transport. The kit includes all necessary reagents and EndPoint ID test instructions. Test parameters and ranges can be modified based on your specific needs.

Alkalinity, 1 drop = 10 ppm as CaCO3
Chloride, 1 drop = 10 ppm as Cl
Hardness, 1 drop = 2 or 10 ppm as CaCO3
Sulfite, 1 drop = 10 ppm as Na2SO3
Orthophosphate, 0 to 80 ppm as PO4

WCTK300 Water Conditioning Technician Kit by AquaPhoenix

The technicians kit is a complete field test kit designed for the water conditioning technician. This kit has reagents and equipment to test the incoming water and the effluent from the softener. Test include P & T Alkalinity, Hardness, Sulfide, Nitrate, Iron, Chlorine, pH and Conductivity / TDS. All of the items are housed in a durable and compact plastic case with a compartment to securely hold each item.

Kit Contains
Alkalinity, P&T Test, 1 drop = 10 ppm as CaCO3
Hardness Test, 1 drop = 1 gpg as CaCO3 and 1 drop =0.5 ppm as CaCO3
Iron Test, 0.5-10.0 ppm
pH, Wide Range Test, 5.0-10.0 pH
Chlorine, Free, Total and Combined Test, 0.2-3.0 ppm
Sulfide Test, 0.2-20.0 ppm
Nitrate Nitrogen Tablet Kit, 0-15 ppm
Conductivity Pen Meter

YD300 Portable Water Hardness Meter Kit by Apera

The Apera Instruments' YD300 is designed for quick & accurate measurements of Water Hardness (the concentration of calcium ions Ca2+ and magnesium ions Mg2+). The YD300 comes equipped with a patented 601 water hardness combination electrode that is proven to produce the same accuracy as the traditional EDTA Volumetric Method but in a much more convenient manner. Unlike the traditional EDTA Method, There is no need for probe stirring or adding reagents during tests, and you can directly measure your sample solutions' ion concentration just like pH testing.

The meter utilizes an intelligent chip design that supports automatic calibration, data storage (up to 99 groups) and a low battery voltage indicator. The YD300 supports the ability to switch between eight commonly used Water Hardness units, including mmol/L, mg/L (CaCO3), mg/L (CaO), mmol/L (Boiler), mg/L (Ca), °fH (France Degree), °dH (German Degree) and °eH (England Degree).

The YD300 is IP57 waterproof rated and comes as a complete kit. This kit includes the Model 601-S water hardness electrode, Water hardness calibration solutions ( B1, B2 and B3 ); corresponding calibration bottles, Water hardness activation solution, a 20 ml test cup, a test cup pedestal, 2 AA batteries, and a quick manual all in a rugged carrying case. Applications: drinking water, wastewaters, cooling towers, boilers, pipelines, aquaculture, pools & spas. Two-Year manufacturer warranty for the instrument (6-month for the probe).

• Adopting electrode method to test hardness, having the same accuracy as EDTA titration method, yet much more convenient
• Patented 601-S 3-in-1 water hardness combination electrode: combines a measuring electrode, a reference electrode, and a temperature electrode all in one
• Intelligent chip design produces stable potential, fast response rate, and convenient use;
• 99 groups of data storage; automatic calibration and temperature compensation (ATC), auto-lock and power-off
• Portable IP57 waterproof design equipped as a full kit with a rugged carrying case; suitable for both lab and field test

WCTK100 Water Conditioning Hardness Kit by AquaPhoenix

1 drop = 1 gpg as CaCo3 / 15 mL
1 drop = 0.5 ppm as CaCo3 / 25 mL

EndPoint ID test kits are packaged in a durable plastic case and include all reagents, equipment and instruction card to complete approximately 60-75 tests. Color coded reagent caps match the color bar on the instruction card for easy identification when running multiple tests and our photographic, step-by-step instructions keep testing simple and help users easily identify color changes.

BWTK100 Boiler Water Combination Test Kit by AquaPhoenix

This boiler water test kit combines five common test parameters into one, easy-to-use combination test kit for monitoring boiler systems. The Boiler Water Test Kit 100 is packaged in a durable plastic case with handle for easy transport. The kit includes all necessary reagents and EndPoint ID test instructions for monitoring Alkalinity, Chloride, Total Hardness, Calcium Hardness and Sulfite. Test parameters and ranges can be modified based on your specific needs. Let us know how we can help customize this kit to fit your needs.

Specifications

• Alkalinity P & T: 1 drop = 10 ppm as CaCO3/25ml 1 drop = 50 ppm as CaCO3/25ml
• Chloride: 1 drop = 10 ppm as Cl/25ml
• Total & Calcium Hardness: 1 drop = 2 or 10 ppm as CaCO3/25ml
• Sulfite: 1 drop = 2 or 10 ppm as Na2SO3/25ml

CWTK100 Cooling Water Test Kit 100 by AquaPhoenix

Properly monitoring and treating your cooling water system is vital to your daily operations. This cooling water test kit combines seven common test parameters into one, easy-to-use combination test kit. The Cooling Water Test Kit 100 is packaged in a durable plastic case with handle for easy transport. The kit includes all necessary reagents and EndPoint ID test instructions for monitoring Alkalinity, Chloride, Total Hardness, Calcium Hardness, Nitrite, Phosphonate and pH. Also included with this kit is the Myron L EP-10 conductivity meter. Test parameters and ranges can be modified based on your specific needs. Let us know how we can help customize this kit for you.

Specifications

• Alkalinity P & T: 1 drop = 10 ppm as CaCO3/25ml 1 drop = 50 ppm as CaCO3/25ml
• Chloride: 1 drop = 10 ppm as Cl/25ml
• Total & Calcium Hardness: 1 drop = 2 or 10 ppm as CaCO3/25ml
• Nitrite (CAN): 1 drop = 50 ppm as NaNO2/5ml
• Phosphonate: 1 drop = 0.7 ppm as HEDP, 1 drop = 2 ppm as PBTC, 1 drop = 1.25 ppm as HPA
• pH Strips (100pk): 7.0-14.0
• Myron L EP-10: 0-10, 100, 1000, 10000 μM/ μS