Fyrite

0010-5011 Fyrite O2 Testing Indicator (0-21%), sampling assembly and carry case by Bacharach

Fast, accurate and easy to use instruments for measuring and analyzing carbon dioxide or oxygen. Fyrite Analyzers are available for either CO2 or O2 analysis, and each model is produced in three scale ranges.

All six instruments are similar in appearance and size, but differ in important construction details, as well as in the absorbing fluids.

Each model, therefore, is suitable only for the particular gas analysis or scale range for which it has been manufactured. Accuracy is within ±1/2% CO2 or 02.

Operation

Fyrite absorbing fluid is selective in the chemical absorption of carbon dioxide or oxygen, respectively. Therefore, the Fyrite's accuracy, which is well within the range required for industrial and professional applications, does not depend upon complicated sequential test procedures. In addition, Fyrite readings are unaffected by the presence of most background gases in the sample.

The number of tests possible with one fluid charge depends on the concentration of samples being tested. At midpoint scale reading the CO2 fluid is good for approximately 300 gas samples and the O2 fluid for 100 tests. The need to replace fluid can be easily determined with a simple test, and replacement is an easy procedure. These test procedures, as well as other good information, are provided in the Fyrite manual 11-9026.

Features

Fyrite Indicators have a broad range; they may be exposed to ambient temperatures from -30° to 150°F, and gases up to 850°F may be tested with standard aspirator sampling equipment (special sampling equipment for higher gas temperatures or dry gases is available). Order Fyrite Instruction Manual 11-9026. For temperatures above 1400°F, a ceramic sampling tube (Bacharach Part # 11-0164) is available.

Applications

• 0-7.6% CO2 – CO2 tests of controlled atmospheres in fruit, vegetable, meat storage rooms, and incubator monitoring.
• 0-7.6% O2 – Oxygen determination in flammable gases; oxygen tests to check inertness of atmosphere in silos, fuel tanks, etc.
• 0-20% CO2 – Flue gas combustion tests; CO2 tests of heat treating atmospheres.
• 0-21% O2 – Flue gas combustion tests, oxygen deficiency test. Checking oxygen concentrations in hydrogen cooled generators and oil sealed inert gas transformers.
• 0-60% CO2 – Checking CO2 in inert gas blankets in tankers and barges carrying gasoline and other combustibles; CO2 tests on lime kilns; checking CO2 in sewage plant digesters.
• 0-60% O2 – Oxygen test in connection with oxygen and gas anesthesiology.

0010-5111 Fyrite CO2 and O2 Testing Kit c/w sampling assembly and carry case by Bacharach

Bacharach® Combustion Testing Kits continue to offer you the most economical means of testing for oil burner efficiency during installation or servicing. Each kit is designed with the service technician in mind and contains the instruments listed in the ordering chart.

Components

• 1. Fyrite® Indicators; CO2 and O2 – The Fyrite Indicators are utilized in conjunction with the Tempoint Dial thermometer to determine efficiency calculation with the Fire Efficiency Slide Rule.
• 2. Monoxor® CO Indicator – The Monoxor Indicator quickly and easily tests CO concentrations in flue gas samples.
• 3. Fire Efficiency Finder/Stack Loss Slide Rule – The Fire Efficiency Slide Rule provides a rapid and uncomplicated means of determining combustion efficiency and stack loss from the resultsof the CO2 and stack temperature tests.
• 4. Draftrite® Draft Gauge – The hand-held Draftrite pinpoints draft problems and determines chimney defects.
• 5. Tempoint® Dial Thermometer – With the Tempoint Dial Thermometer, you can obtain an accurate stack temperature of gas designed equipment.
• 6. Gas Service Calculator – The Gas Service Calculator determines the orifice size needed for fuel gas of any specific gravity and BTU value.
• 7. Gas Pressure Manometer – The Gas Pressure Manometer determines if gas input and gas pressure adjustments are within recommended limits.
• 8. Monoxor® Carbon Monoxide Detector – In some Testing Kits, the Monoxor Carbon Monoxide Detector replaces the Monoxor CO Indicator.
• 9. Carrying Case – Testing kit comes in a rugged, plastic carrying case.

0011-7036 Fyrite O2 Indicator (0-21%) by Bacharach

Fast, accurate and easy to use instruments for measuring and analyzing carbon dioxide or oxygen. Fyrite Analyzers are available for either CO2 or O2 analysis, and each model is produced in three scale ranges.

All six instruments are similar in appearance and size, but differ in important construction details, as well as in the absorbing fluids.

Each model, therefore, is suitable only for the particular gas analysis or scale range for which it has been manufactured. Accuracy is within ±1/2% CO2 or 02.

Operation

Fyrite absorbing fluid is selective in the chemical absorption of carbon dioxide or oxygen, respectively. Therefore, the Fyrite's accuracy, which is well within the range required for industrial and professional applications, does not depend upon complicated sequential test procedures. In addition, Fyrite readings are unaffected by the presence of most background gases in the sample.

The number of tests possible with one fluid charge depends on the concentration of samples being tested. At midpoint scale reading the CO2 fluid is good for approximately 300 gas samples and the O2 fluid for 100 tests. The need to replace fluid can be easily determined with a simple test, and replacement is an easy procedure. These test procedures, as well as other good information, are provided in the Fyrite manual 11-9026.

Features

Fyrite Indicators have a broad range; they may be exposed to ambient temperatures from -30° to 150°F, and gases up to 850°F may be tested with standard aspirator sampling equipment (special sampling equipment for higher gas temperatures or dry gases is available). Order Fyrite Instruction Manual 11-9026. For temperatures above 1400°F, a ceramic sampling tube (Bacharach Part # 11-0164) is available.

Applications

• 0-7.6% CO2 – CO2 tests of controlled atmospheres in fruit, vegetable, meat storage rooms, and incubator monitoring.
• 0-7.6% O2 – Oxygen determination in flammable gases; oxygen tests to check inertness of atmosphere in silos, fuel tanks, etc.
• 0-20% CO2 – Flue gas combustion tests; CO2 tests of heat treating atmospheres.
• 0-21% O2 – Flue gas combustion tests, oxygen deficiency test. Checking oxygen concentrations in hydrogen cooled generators and oil sealed inert gas transformers.
• 0-60% CO2 – Checking CO2 in inert gas blankets in tankers and barges carrying gasoline and other combustibles; CO2 tests on lime kilns; checking CO2 in sewage plant digesters.
• 0-60% O2 – Oxygen test in connection with oxygen and gas anesthesiology.

0024-8512 Fyrite InTech Reporting Kit (N. American configuration) with probe, rubber boot, IrDA wireless printer, Fyrite User Software, USB cable and hard carrying case by Bacharach

MSA Bacharach's InTech® is the perfect tool for entry-level residential HVAC technicians providing readings for O2, CO, CO2, Combustion Efficiency and Temperature. The InTech® is available with precalibrated, Sensor Exchange Program gas sensors to minimize downtime and maintenance costs. The Combustion mobile app (available for Android & iOS) allows users to create and send customizable combustion reports on-site.

FEATURES

• Readings for O2, CO, CO2, Combustion Efficiency & Temperature
• Combustion App
• Automatic Sensor Protection
• IR Printer with Magnet
• Ambient CO Monitor
• Precalibrated, Sensor Exchange Program Sensors

BENEFITS

• All-in-one instrument makes combustion tuning fast and simple.
• Quickly create custom reports with comments and send via email (available for Android & iOS).
• Protects sensors in the toughest combustion environments, extending life
• Print combustion and emissions reports in the field
• Check for dangerous levels of ambient CO
• Quick and easy sensor replacement in the field & reduced downtime (doesn't require cal. gas)

0024-8514 Fyrite InTech Reporting Kit (Siegert configuration) with probe, rubber boot, IrDA wireless printer, Fyrite User Software, USB cable and hard carrying case by Bacharach

MSA Bacharach's InTech® is the perfect tool for entry-level residential HVAC technicians providing readings for O2, CO, CO2, Combustion Efficiency and Temperature. The InTech® is available with precalibrated, Sensor Exchange Program gas sensors to minimize downtime and maintenance costs. The Combustion mobile app (available for Android & iOS) allows users to create and send customizable combustion reports on-site.

FEATURES

• Readings for O2, CO, CO2, Combustion Efficiency & Temperature
• Combustion App
• Automatic Sensor Protection
• IR Printer with Magnet
• Ambient CO Monitor
• Precalibrated, Sensor Exchange Program Sensors

BENEFITS

• All-in-one instrument makes combustion tuning fast and simple.
• Quickly create custom reports with comments and send via email (available for Android & iOS).
• Protects sensors in the toughest combustion environments, extending life
• Print combustion and emissions reports in the field
• Check for dangerous levels of ambient CO
• Quick and easy sensor replacement in the field & reduced downtime (doesn't require cal. gas)