Flow Cell

TCS3020/P1K/MB2/R1/20/TL Toroidal Conductivity Sensor, PPO, P1K, 20ft, TL MB 24V by Sensorex

The Sensorex TCS series toroidal (inductive) conductivity sensors feature wide measurement ranges and dependable toroidal technology over the range 0-2000 ms/cm. Resistant to corrosion, coatings, and fouling common to contacting conductivity sensors, the TCS series is designed for a long and trouble-free service life.

Noryl is the standard material of construction and has a wide solvent tolerance and temperature stability to 105 degrees C.* All Noryl models can be submersed by utilizing the 3/4"MNPT threads on the sensor or installed inline using the FC95C flow cell. ATC element is user specified and built into the TCS sensor. All TCS sensor models are supplied with 20ft long 9-conductor cable. Custom lengths are available. Please contact Sensorex for pricing.

• Resists coating, corrosion and fouling
• Durable Noryl construction
• Easy installation
• Custom tee for in-line mounting
• Connects with Sensorex EX2000RS, TCSMA, CSTX, or Rosemount or Foxboro instrumentation

FC800 S8000 Flow Cell, 1 1/2" Slip CPVC by Sensorex

Designed to be used with Sensorex CS300 Process Graphite Contacting Conductivity Sensor with 0.1 cell constant or Sensorex S8000 pH Sensor.

FC875/T Flow Cell S8000, 3/4" x 3/4" NPT CPVC by Sensorex

The FC875/T Threaded 3/4" CPVC Flow Cell is used for in-line installation of the S8000CD Self-Cleaning Industrial pH Sensor or S8000CD-ORP Self-Cleaning Industrial ORP Sensor.

The FC875/T is part of a complete S8000 package and can be purchased separately, or it is already included in our S8000 Kits listed below:

• S8300 Self-Cleaning In-Line Process pH Sensor
• S8200 ORP Self-Cleaning In-Line Process ORP Sensor

FC72 Flow Cell for Free Chlorine (FCL) and Chlorine Dioxide (CLD) Sensors by Sensorex

Our FC72 flow cell facilitates high-accuracy measurements of free chlorine and chlorine dioxide by preventing air bubble formation on the sensor membrane while maintaining laminar flow across the membrane. Compatible with FCL Series Free Chlorine Sensors and CLD Series Chlorine Dioxide Sensors.

• Facilitates high-accuracy measurements: Maintains laminar flow through the system while preventing air bubbles for measurement accuracy
• Simple Sensor Installation: Configure your free chlorine or chlorine dioxide sensor in the flow cell in less than 5 minutes
• Compatible with a wide variety of sensors: For use with Sensorex FCL Series Free Chlorine and CLD Series Chlorine Dioxide Sensors
• One year limited warranty: We stand behind all our products with the Sensorex Guarantee

FC45C 200uL Low Volume Acrylic Flow Cell includes 2 each 1/16" Tube Fittings by Sensorex

Sensorex manufactures fast response 50 and 200 microliter internal volume flow cells for pH measurement. All cells are made of clear Acrylic or Kynar (PVDF). Designs include 1/16" inlet and outlet fittings. All cells use the standard, economical Sensorex 450CD Flat Surface Combination pH/Reference Electrode or a special version of 450CD with 100psig pressure tolerance (model 970277).

The pH Detectors are designed for use with a variety of instrumental techniques such as FIA, HPLC and IEF and are also used to continuously monitor the pH of low volume flows in bench scale chemical systems.

Both the 50 and 200 microliter internal volume flow cells areavailable in acrylic or PVDF and are supplied with inlet and outlet fittings sized for standard 1/16" OD tubing. The cells' ports have 1/4-28 threads which accept a variety of other tube fittings.

Very low internal volumes are achieved by using a flat surface pH electrode located at the top of the flow cavity. The resulting rectangular cross-section flow path has no protruding parts which could interfere with a clean sweeping flow. The result of this design is the fast system response shown on the performance curves on page 2.

The Flat Surface Electrode, Sensorex Model 450CD, is a combination pH/Reference electrode with double reference junction design. It includes both a pH and reference half cell. The reference electrode is a sealed, gel-filled design and includes a peripheral, semi-porous polyethylene junction.

• Fast response!
• Choice of 200uL or ultra-low volume 50uL flow cells
• Acrylic or PVDF (biocompatible) materials of construction
• Supplied with flangeless 1/4-28 fittings for 1/16" OD for tubing
• Use with Flat-Surface Easy-To-Clean Electrode
• Model available for 100psi use

FC47C 50uL Low Volume Acrylic Flow Cell includes 2 each 1/16" Tube Fittings by Sensorex

Sensorex manufactures fast response 50 and 200 microliter internal volume flow cells for pH measurement. All cells are made of clear Acrylic or Kynar (PVDF). Designs include 1/16" inlet and outlet fittings. All cells use the standard, economical Sensorex 450CD Flat Surface Combination pH/Reference Electrode or a special version of 450CD with 100psig pressure tolerance (model 970277).

The pH Detectors are designed for use with a variety of instrumental techniques such as FIA, HPLC and IEF and are also used to continuously monitor the pH of low volume flows in bench scale chemical systems.

Both the 50 and 200 microliter internal volume flow cells areavailable in acrylic or PVDF and are supplied with inlet and outlet fittings sized for standard 1/16" OD tubing. The cells' ports have 1/4-28 threads which accept a variety of other tube fittings.

Very low internal volumes are achieved by using a flat surface pH electrode located at the top of the flow cavity. The resulting rectangular cross-section flow path has no protruding parts which could interfere with a clean sweeping flow. The result of this design is the fast system response shown on the performance curves on page 2.

The Flat Surface Electrode, Sensorex Model 450CD, is a combination pH/Reference electrode with double reference junction design. It includes both a pH and reference half cell. The reference electrode is a sealed, gel-filled design and includes a peripheral, semi-porous polyethylene junction.

• Fast response!
• Choice of 200uL or ultra-low volume 50uL flow cells
• Acrylic or PVDF (biocompatible) materials of construction
• Supplied with flangeless 1/4-28 fittings for 1/16" OD for tubing
• Use with Flat-Surface Easy-To-Clean Electrode
• Model available for 100psi use