Filter Bag

*Please note we can only ship RKI products to customers within the United States

44428 EclipSmart Universal Solar Filter by Celestron

Turn your telescope, spotting scope, or DSLR camera into a solar scope! The EclipSmart Universal Solar Filter is a must-have accessory perfect for viewing the Sun and eclipses like the upcoming 2023 Annular Solar Eclipse and 2024 Total Solar Eclipse. Affordable, easy to use, and best of all, Solar Safe, this filter conforms to the ISO 12312-2:2015(E) international safety standard. The EclipSmart Universal Solar Filter has a solar filter aperture of 60mm and works with any optic or lens measuring 75 to 100 mm in diameter, including telescopes, spotting scopes, and DSLR camera lenses. The solar filter fits around your optical device with adjustable side panels that secure with a rubber band for a snug fit. We include (2) rubber bands, but we recommend that you change out the bands frequently. To replace use #32 rubber bands. When it's not in use, fold the filter flat and place it inside the reusable bag.

If you plan to use this filter with your DSLR camera, we recommend adding a sunshade to the camera lens. This will expand the lens diameter and allow for a more secure attachment to the filter using the rubber bands. We also recommend using a tripod, monopod, or other stabilizing device with your camera setup. You can use your camera and filter intermittently over extended periods of up to several hours, but do not point your camera and filter directly at the Sun for more than three continuous minutes.

Never use this filter if your camera has an optical viewfinder. If you are uncertain about the type of viewfinder on your camera, do not use this filter. Always ensure that the filter is placed directly onto the camera lens during imaging, never between the viewfinder and your eye.

If you would like to use tape to secure the filter to your optic, Celestron recommends low-tack painter's tape to prevent any potential damage to your optic.

Solar Safe Technology

EclipSmart solar products feature Solar Safe filter technology—the ultimate protection from harmful solar radiation, including IR and UV light, plus 99.999% of visible light. Celestron Solar Safe filter technology is SAFE for direct observation of the Sun and has been independently tested to conform to and meet the transmission requirements of ISO 12312-2:2015(E), Filters for Direct Observation of the Sun, EN 1836:2005 + A1:2007 (E) for an E15 Filter for the Direct Observation of the Sun and AS/NZS 1338.1:2012, Filters for Eye Protectors.

Important safety note: inspect your filter before every use. Do not use and discard if damaged, torn, punctured, or separated from the frame in any way.

• SOLAR SAFE TELESCOPE FILTER: Filter conforms to the ISO 12312-2:2015(E) international safety standard for filters directly viewing the Sun. The ideal tool for viewing eclipses, sunspots, or the Sun any day!
• WORKS WITH YOUR EXISTING TELESCOPE, SPOTTING SCOPE, OR DSLR CAMERA: Compatible with objective lenses with an outside diameter of 75mm to 100mm.
• SAFE, SNUG FIT: To use, adjust the side panels to fit the filter on your optical device and attach the rubber band for a secure fit.
• COMPACT AND PORTABLE: Filter folds flat for storage in its reusable bag when not in use.
• SOLAR FILM MADE IN THE USA: Our Solar Safe film is produced in the USA by American Paper Optics, one of the suppliers recommended by NASA for safe solar viewing.
• GREAT VIEWS AND IMAGES: This filter features an orange tint, producing a natural look perfect for visual observing and capturing images through your scope or camera.

FSK-1/2 Filter Service Kit for QFP Multi-Round Housings by Quantrol

Take the guess work out of your maintenance intervals, maximize filter performance and simplify service of your filtration system with these Filter Service Kits. Versions are available for use with QFP Series Bag and Multi-Round Cartridge housings.

Kits Include:

Pressure Gauges

Pressure gauges on the inlet and outlet of the filter housing are used to determine when the cartridges are dirty and need to be replaced.

Drain Valves

Drain fluid from housing when servicing.

Air Purge / Pressure Relief

Purge air from housing when starting up to ensure 100% of the filter media is utilized. Relieve pressure and aid draining of housing when servicing.

FSK-1/4 Filter Service Kit for QFP Multi-Round Housings by Quantrol

Take the guess work out of your maintenance intervals, maximize filter performance and simplify service of your filtration system with these Filter Service Kits. Versions are available for use with QFP Series Bag and Multi-Round Cartridge housings.

Kits Include:

Pressure Gauges

Pressure gauges on the inlet and outlet of the filter housing are used to determine when the cartridges are dirty and need to be replaced.

Drain Valves

Drain fluid from housing when servicing.

Air Purge / Pressure Relief

Purge air from housing when starting up to ensure 100% of the filter media is utilized. Relieve pressure and aid draining of housing when servicing.

72-5201RK-TR1 Eagle Portable Monitor for H2 (0-5%)/O2, for Transformer Gas Testing, with Sample Bag & Dilution Fitting by RKI Instruments

The Eagle Portable Monitor can simultaneously detect up to 6 different gases. With over 400 gas monitoring configurations, the unit can detect a wide range of toxic gases. RKI Industries offers long life protection for workplace safety and hazardous jobsites. With a reputation for advanced engineering and state of the art technology, the RKI Industries' Eagle One to Six Gas Portable Monitor is an industry leader in accuracy and affordability.

Features

The Eagle One to Six Gas Portable Monitor is available with a wide variety of exclusive features. The unit is capable of PPM/LEL hydrocarbon detection and for environmental use, has a methane elimination switch. The dual hydrophobic filters (available on some models) ensure quality control. To preserve the integrity and safety of the device, the portable monitor also has an adjustment lockout switch to prevent tampering. For quick and easy testing, the monitor offers autocalibration and single gas calibration.

The Eagle is housed in an ergonomic RFI, EMI, chemical, and weather resistant polycarbonate and polyester enclosure. It can operate in the rain or in 2 inches of water without damage. It features an ergonomically designed top handle to ensure durability.

Accessories and Options

IR Sensors are available for CO2, % LEL CH4 or HC, and % volume CH4 or HC. Each unit also has datalogging capabilities for research, evaluation, and analysis of worksite atmospheres. The unit comes standard with several accessories including a shoulder strap, alkaline batteries, a hydrophobic probe, a 5 foot hose, and an internal hydrophobic filter with most models. Optional accessories can be purchased to fully customize the portable monitor to meet specific needs including a datalogging kit, remote alarms, dilution fitting, Ni-Cad batteries, battery chargers, continuous operation adapter, extra loud buzzer, extension probes, and large internal hydrophobic filter.

Specifications

The Eagle has a battery life of up to 30 hours of continuous operation with alkaline or Ni-cad capability and a sensor life of approximately 2 years. Its standard weight is approximately 5 pounds with dimensions of 10.5 L x 5.9 W x 7 H. The formidable long life pump (with a life of approximately 6,000 hours) reaches up to 125 feet in range with filters and has a low flow pump shut off and alarm. The unit has a response time of up to 30 seconds for most gases, and features a double alarm of audible alerts at 85 dB and visual alerts of dual high intensity LEDs and a flashing display screen.

The display screen is an easy to read 4 x 20 LCD readout. The backlit display sits at the top of the unit for full visibility, and displays the readings and statuses of 4 channels simultaneously.

The portable monitor is rated as intrinsically safe and has a standard 2 year warranty for materials and craftsmanship.

*Please note we can only ship RKI products to customers within the United States

72-5101RK-TR1 Eagle Portable Monitor for Hydrogen (H2), 0 - 5% Volume, for Transformer Gas Testing, with Bag & Dilution Fitting by RKI Instruments

The Eagle Portable Monitor can simultaneously detect up to 6 different gases. With over 400 gas monitoring configurations, the unit can detect a wide range of toxic gases. RKI Industries offers long life protection for workplace safety and hazardous jobsites. With a reputation for advanced engineering and state of the art technology, the RKI Industries' Eagle One to Six Gas Portable Monitor is an industry leader in accuracy and affordability.

Features

The Eagle One to Six Gas Portable Monitor is available with a wide variety of exclusive features. The unit is capable of PPM/LEL hydrocarbon detection and for environmental use, has a methane elimination switch. The dual hydrophobic filters (available on some models) ensure quality control. To preserve the integrity and safety of the device, the portable monitor also has an adjustment lockout switch to prevent tampering. For quick and easy testing, the monitor offers autocalibration and single gas calibration.

The Eagle is housed in an ergonomic RFI, EMI, chemical, and weather resistant polycarbonate and polyester enclosure. It can operate in the rain or in 2 inches of water without damage. It features an ergonomically designed top handle to ensure durability.

Accessories and Options

IR Sensors are available for CO2, % LEL CH4 or HC, and % volume CH4 or HC. Each unit also has datalogging capabilities for research, evaluation, and analysis of worksite atmospheres. The unit comes standard with several accessories including a shoulder strap, alkaline batteries, a hydrophobic probe, a 5 foot hose, and an internal hydrophobic filter with most models. Optional accessories can be purchased to fully customize the portable monitor to meet specific needs including a datalogging kit, remote alarms, dilution fitting, Ni-Cad batteries, battery chargers, continuous operation adapter, extra loud buzzer, extension probes, and large internal hydrophobic filter.

Specifications

The Eagle has a battery life of up to 30 hours of continuous operation with alkaline or Ni-cad capability and a sensor life of approximately 2 years. Its standard weight is approximately 5 pounds with dimensions of 10.5 L x 5.9 W x 7 H. The formidable long life pump (with a life of approximately 6,000 hours) reaches up to 125 feet in range with filters and has a low flow pump shut off and alarm. The unit has a response time of up to 30 seconds for most gases, and features a double alarm of audible alerts at 85 dB and visual alerts of dual high intensity LEDs and a flashing display screen.

The display screen is an easy to read 4 x 20 LCD readout. The backlit display sits at the top of the unit for full visibility, and displays the readings and statuses of 4 channels simultaneously.

The portable monitor is rated as intrinsically safe and has a standard 2 year warranty for materials and craftsmanship.

*Please note we can only ship RKI products to customers within the United States

QFPBH1-304 304 Stainless Size #1 Housing, 2" NPT by Quantrol

QFP Series Bag Filter Housings offer an economical solution to your commercial and industrial bag filtration applications. These heavy duty housings are designed for maximum durability. The swing bolt closure with eye hooks allows for quick and easy bag change outs.

Housings are available for size #1 or #2 filter bags in your choice of 304L SS, 316L SS, or carbon steel.

Features

• Swing Bolt Closure - Single Bag
• Adjustable Stainless Steel Leg Assembly - Single Bag
• Swing Bolts with Davit Assist Closure - Multi-Round
• Heavy Duty Welded on Mounting Legs - Multi-Round
• Stainless Steel Support Basket(s) with 1/8" Perforations
• Buna N Gasket
• 1/4" Vent and Gauge Ports
• Drain Port
• Housing Rated at 150 PSI, 300°F

QFPBH2-304 304 Stainless Size #2 Housing, 2" NPT by Quantrol

QFP Series Bag Filter Housings offer an economical solution to your commercial and industrial bag filtration applications. These heavy duty housings are designed for maximum durability. The swing bolt closure with eye hooks allows for quick and easy bag change outs.

Housings are available for size #1 or #2 filter bags in your choice of 304L SS, 316L SS, or carbon steel.

Features

• Swing Bolt Closure - Single Bag
• Adjustable Stainless Steel Leg Assembly - Single Bag
• Swing Bolts with Davit Assist Closure - Multi-Round
• Heavy Duty Welded on Mounting Legs - Multi-Round
• Stainless Steel Support Basket(s) with 1/8" Perforations
• Buna N Gasket
• 1/4" Vent and Gauge Ports
• Drain Port
• Housing Rated at 150 PSI, 300°F

PGK-160-3/4 Pressure Gauge Kit for QFP1X Single Cartridge by Quantrol

Take the guess work out o fyour filter maintenance intervals and increase the performance of your filtration system with the PGK-160 Pressure GaugeKit.

Pressure gauges installed on the inlet and outlet of a filter housing can be used to determine when the cartridges are dirty. The pressure gauges give a visual indication of the pressure before and after the filter. The more the filter loads up with particles, the more the differential pressure increases. Once the differential pressure reaches a user determined value, usually 15-25 psid, the operator knows that the filter needs to be changed or cleaned. Consult filter cartridge manufacturer for maximum psid recommendations as this value varies based on cartridge type.

This kit is designed for use with GTCHB Multi Round Cartridge Housings as well GBF and GMBV Series Filter Bag Housings. The PGK-160 includes gauges for the inlet and outlet as well as installation fittings.

Features

• Liquid Filled Gauges (2)
• 0-160 PSI Scale
• Stainless Steel installation hardware
• Easily installs in the housings 1/2" NPT gauge ports.
• Allows for the addition of drain lines if needed.

TK8400-Z Babcock & Wilcox Iron Filtration Test (in plastic bag) by AquaPhoenix

This simple filtration kit is used to detect low levels of insoluble iron in condensate systems Our pressure filter in the lab supply section can be substituted for the glassware to make this kit field worthy and more economical.

Kit Includes:

• Filter Holder, Vacuum (6168-0001)
• 1L Flask with Side Arm (10-181F)
• Filter, Membrane, Mixed Cellulose Ester 47mm (FP-0045-47)
• Babcock & Wilcox Filter Charts (BWCHART)
• Nalgene Hand Pump (01-071)

TK8550-Z Silt Density Index Kit (packaged in plastic bag) by AquaPhoenix

The SDI test is used to determine the feed water quality for water feeding membrane filtration systems. The most common is reverse osmosis or RO system. This test method indicates the quantity of particulate matter in low turbidity (<1.0 NTU) waters. This test is based on the Standard Test Method for Silt Density Index (SDI) of Water. ASTM procedure D4189-95.

Included components:

• Pressure control and filtration assembly
• Graduated cylinder, poly, 500mL
• Filter paper, 47mm, 0.45 micron, 100 pack
• Digital thermometer, -40 to 200 degrees celcius
• Stopwatch, digital & waterproof
• Tweezers

059-C110-000 ppbRAE 3000 Portable Handheld VOC Monitor - 10.6 eV Lamp, Li-Ion / Universal Charger by RAE Systems

The compact ppbRAE 3000 is a comprehensive VOC gas monitor and datalogger for hazardous environments. The ppbRAE 3000 is the most advanced handheld VOC monitor available for parts-per-billion detection. This third-generation patented PID device monitors VOCs using a photoionization detector with a 9.8 eV, 10.6 eV UV-discharge lamp.

The built-in wireless modem allows real-time data connectivity with the ProRAE Guardian command center located up to two miles/3 km away (with optional RAELink3 portable modem) from the ppbRAE 3000 detector.

Monitor only includes

• ppbRAE 3000 Monitor, with RAE Systems UV lamp, as specified
• Datalogging with ProRAE Studio II
• Charging/download adapter
• VOC Zeroing Tubes (1 box)
• Tube adapter
• Tedlar® bag for calibration
• Flex-I-Probe™
• External filter
• Rubber boot with straps
• Alkaline battery adapter
• Lamp-cleaning and tool kit
• Operation CDROM
• Operation & Maintenance manual
• Soft leather case

Monitor with accessories kit adds

• Hard transport case with pre-cut foam padding
• Charging/download cradle
• 5 porous metal filters and O-rings
• Organic vapor zeroing kit
• Gas outlet port adapter and tubing

Optional calibration kit adds

• 10 ppm isobutylene calibration gas, 34L
• Calibration regulator and flow controller

Optional Guaranteed Cost of Ownership Program

• 4-year repair and replacement guarantee
• Annual maintenance service

Key Features

• 3-second response time
• Extended range from 1 ppb to 10,000 ppm with best in class linearity
• Humidity compensation with integral humidity and temperature sensors
• Real-time wireless built-in - Bluetooth (and optional RAELink3 portable modem) or Mesh Network support
• Integrated Correction Factors list of 220 compounds more than any other PID
• Includes flashlight for dark conditions
• Large graphic display presents gas type, Correction Factor and concentration
• Easy access to battery, lamp and sensor in seconds without tools
• Rugged housing withstands use in harsh environments
• IP-67 waterproof design for easy cleaning and decontamination

Application

• Oil & Gas
• HazMat
• Industrial Safety
• Civil Defense
• Environmental & Indoor Air Quality

059-C110-100 ppbRAE 3000 Portable Handheld VOC Monitor - 10.6 eV Lamp, Li-Ion / Universal Charger, Accessories Kit, Calibration Kit by RAE Systems

The compact ppbRAE 3000 is a comprehensive VOC gas monitor and datalogger for hazardous environments. The ppbRAE 3000 is the most advanced handheld VOC monitor available for parts-per-billion detection. This third-generation patented PID device monitors VOCs using a photoionization detector with a 9.8 eV, 10.6 eV UV-discharge lamp.

The built-in wireless modem allows real-time data connectivity with the ProRAE Guardian command center located up to two miles/3 km away (with optional RAELink3 portable modem) from the ppbRAE 3000 detector.

Monitor only includes

• ppbRAE 3000 Monitor, with RAE Systems UV lamp, as specified
• Datalogging with ProRAE Studio II
• Charging/download adapter
• VOC Zeroing Tubes (1 box)
• Tube adapter
• Tedlar® bag for calibration
• Flex-I-Probe™
• External filter
• Rubber boot with straps
• Alkaline battery adapter
• Lamp-cleaning and tool kit
• Operation CDROM
• Operation & Maintenance manual
• Soft leather case

Monitor with accessories kit adds

• Hard transport case with pre-cut foam padding
• Charging/download cradle
• 5 porous metal filters and O-rings
• Organic vapor zeroing kit
• Gas outlet port adapter and tubing

Optional calibration kit adds

• 10 ppm isobutylene calibration gas, 34L
• Calibration regulator and flow controller

Optional Guaranteed Cost of Ownership Program

• 4-year repair and replacement guarantee
• Annual maintenance service

Key Features

• 3-second response time
• Extended range from 1 ppb to 10,000 ppm with best in class linearity
• Humidity compensation with integral humidity and temperature sensors
• Real-time wireless built-in - Bluetooth (and optional RAELink3 portable modem) or Mesh Network support
• Integrated Correction Factors list of 220 compounds more than any other PID
• Includes flashlight for dark conditions
• Large graphic display presents gas type, Correction Factor and concentration
• Easy access to battery, lamp and sensor in seconds without tools
• Rugged housing withstands use in harsh environments
• IP-67 waterproof design for easy cleaning and decontamination

Application

• Oil & Gas
• HazMat
• Industrial Safety
• Civil Defense
• Environmental & Indoor Air Quality

059-C111-000 ppbRAE 3000 Portable Handheld VOC Monitor - 10.6 PID, Rechargeable, Wireless (Bluetooth) by RAE Systems

The compact ppbRAE 3000 is a comprehensive VOC gas monitor and datalogger for hazardous environments. The ppbRAE 3000 is the most advanced handheld VOC monitor available for parts-per-billion detection. This third-generation patented PID device monitors VOCs using a photoionization detector with a 9.8 eV, 10.6 eV UV-discharge lamp.

The built-in wireless modem allows real-time data connectivity with the ProRAE Guardian command center located up to two miles/3 km away (with optional RAELink3 portable modem) from the ppbRAE 3000 detector.

Monitor only includes

• ppbRAE 3000 Monitor, with RAE Systems UV lamp, as specified
• Datalogging with ProRAE Studio II
• Charging/download adapter
• VOC Zeroing Tubes (1 box)
• Tube adapter
• Tedlar® bag for calibration
• Flex-I-Probe™
• External filter
• Rubber boot with straps
• Alkaline battery adapter
• Lamp-cleaning and tool kit
• Operation CDROM
• Operation & Maintenance manual
• Soft leather case

Monitor with accessories kit adds

• Hard transport case with pre-cut foam padding
• Charging/download cradle
• 5 porous metal filters and O-rings
• Organic vapor zeroing kit
• Gas outlet port adapter and tubing

Optional calibration kit adds

• 10 ppm isobutylene calibration gas, 34L
• Calibration regulator and flow controller

Optional Guaranteed Cost of Ownership Program

• 4-year repair and replacement guarantee
• Annual maintenance service

Key Features

• 3-second response time
• Extended range from 1 ppb to 10,000 ppm with best in class linearity
• Humidity compensation with integral humidity and temperature sensors
• Real-time wireless built-in - Bluetooth (and optional RAELink3 portable modem) or Mesh Network support
• Integrated Correction Factors list of 220 compounds more than any other PID
• Includes flashlight for dark conditions
• Large graphic display presents gas type, Correction Factor and concentration
• Easy access to battery, lamp and sensor in seconds without tools
• Rugged housing withstands use in harsh environments
• IP-67 waterproof design for easy cleaning and decontamination

Application

• Oil & Gas
• HazMat
• Industrial Safety
• Civil Defense
• Environmental & Indoor Air Quality

059-C111-100 ppbRAE 3000 Portable Handheld VOC Monitor - 10.6 eV Lamp, Li-Ion / Universal Charger, Accessories Kit, Calibration Kit, Wireless Bluetooth by RAE Systems

The compact ppbRAE 3000 is a comprehensive VOC gas monitor and datalogger for hazardous environments. The ppbRAE 3000 is the most advanced handheld VOC monitor available for parts-per-billion detection. This third-generation patented PID device monitors VOCs using a photoionization detector with a 9.8 eV, 10.6 eV UV-discharge lamp.

The built-in wireless modem allows real-time data connectivity with the ProRAE Guardian command center located up to two miles/3 km away (with optional RAELink3 portable modem) from the ppbRAE 3000 detector.

Monitor only includes

• ppbRAE 3000 Monitor, with RAE Systems UV lamp, as specified
• Datalogging with ProRAE Studio II
• Charging/download adapter
• VOC Zeroing Tubes (1 box)
• Tube adapter
• Tedlar® bag for calibration
• Flex-I-Probe™
• External filter
• Rubber boot with straps
• Alkaline battery adapter
• Lamp-cleaning and tool kit
• Operation CDROM
• Operation & Maintenance manual
• Soft leather case

Monitor with accessories kit adds

• Hard transport case with pre-cut foam padding
• Charging/download cradle
• 5 porous metal filters and O-rings
• Organic vapor zeroing kit
• Gas outlet port adapter and tubing

Optional calibration kit adds

• 10 ppm isobutylene calibration gas, 34L
• Calibration regulator and flow controller

Optional Guaranteed Cost of Ownership Program

• 4-year repair and replacement guarantee
• Annual maintenance service

Key Features

• 3-second response time
• Extended range from 1 ppb to 10,000 ppm with best in class linearity
• Humidity compensation with integral humidity and temperature sensors
• Real-time wireless built-in - Bluetooth (and optional RAELink3 portable modem) or Mesh Network support
• Integrated Correction Factors list of 220 compounds more than any other PID
• Includes flashlight for dark conditions
• Large graphic display presents gas type, Correction Factor and concentration
• Easy access to battery, lamp and sensor in seconds without tools
• Rugged housing withstands use in harsh environments
• IP-67 waterproof design for easy cleaning and decontamination

Application

• Oil & Gas
• HazMat
• Industrial Safety
• Civil Defense
• Environmental & Indoor Air Quality

059-C100-100 PPBRAE 3000 MONITOR.10.6EV,1/2".UL ALKALINE BATTERY.NON WIRELESS.ACCS,CAL KIT,GAS & REGULATOR by RAE Systems

The compact ppbRAE 3000 is a comprehensive VOC gas monitor and datalogger for hazardous environments. The ppbRAE 3000 is the most advanced handheld VOC monitor available for parts-per-billion detection. This third-generation patented PID device monitors VOCs using a photoionization detector with a 9.8 eV, 10.6 eV UV-discharge lamp.

The built-in wireless modem allows real-time data connectivity with the ProRAE Guardian command center located up to two miles/3 km away (with optional RAELink3 portable modem) from the ppbRAE 3000 detector.

Monitor only includes

• ppbRAE 3000 Monitor, with RAE Systems UV lamp, as specified
• Datalogging with ProRAE Studio II
• Charging/download adapter
• VOC Zeroing Tubes (1 box)
• Tube adapter
• Tedlar® bag for calibration
• Flex-I-Probe™
• External filter
• Rubber boot with straps
• Alkaline battery adapter
• Lamp-cleaning and tool kit
• Operation CDROM
• Operation & Maintenance manual
• Soft leather case

Monitor with accessories kit adds

• Hard transport case with pre-cut foam padding
• Charging/download cradle
• 5 porous metal filters and O-rings
• Organic vapor zeroing kit
• Gas outlet port adapter and tubing

Optional calibration kit adds

• 10 ppm isobutylene calibration gas, 34L
• Calibration regulator and flow controller

Optional Guaranteed Cost of Ownership Program

• 4-year repair and replacement guarantee
• Annual maintenance service

Key Features

• 3-second response time
• Extended range from 1 ppb to 10,000 ppm with best in class linearity
• Humidity compensation with integral humidity and temperature sensors
• Real-time wireless built-in - Bluetooth (and optional RAELink3 portable modem) or Mesh Network support
• Integrated Correction Factors list of 220 compounds more than any other PID
• Includes flashlight for dark conditions
• Large graphic display presents gas type, Correction Factor and concentration
• Easy access to battery, lamp and sensor in seconds without tools
• Rugged housing withstands use in harsh environments
• IP-67 waterproof design for easy cleaning and decontamination

Application

• Oil & Gas
• HazMat
• Industrial Safety
• Civil Defense
• Environmental & Indoor Air Quality

059-C101-000 ppbRAE 3000+ Portable Handheld VOC Monitor by RAE Systems

The compact ppbRAE 3000 + is a comprehensive VOC gas monitor and datalogger for hazardous environments. The ppbRAE 3000 + is one of the most advanced handheld VOC monitors available for parts-per-billion detection. This third-generation patented PID device monitors VOCs using a photoionization detector with a 9.8 eV, 10.6 eV UV-discharge lamp.

The built-in wireless modem allows real-time data connectivity with the command center located up to two miles/3 km away (with optional RAELink3 portable modem) from the detector.

• Accurate VOC measurement in all operating conditions
• Easy access to lamp and sensor in seconds without tools
• Patented sensor and lamp autocleaning reduces maintenance
• Monitors real-time readings and location of people
• Low Cost of Ownership: 3-year 10.6 eV lamp Warranty
• BLE module and dedicated APP for enhanced datalogging function

FEATURES & BENEFITS

• 3-second response time
• Extended range from 1 ppb to 10,000 ppm with highly acute linearity
• Humidity compensation with integral humidity and temperature sensors
• Reflex PID Technology™
• Highly connectivity capability through multiple wireless module options
• Integrated Correction Factors list of 220 compounds—more than any other PID
• Includes flashlight for dark conditions
• Large graphic display presents gas type, Correction Factor and concentration
• Easy access to battery, lamp and sensor in seconds without tools
• Rugged housing withstands use in harsh environments
• IP-67 waterproof design for easy cleaning and decontamination

APPLICATIONS

• Oil & Gas
• HazMat
• Industrial Safety
• Civil Defense
• Environmental & Indoor Air Quality

MONITOR ONLY INCLUDES:

• ppbRAE 3000 + Monitor
• Wireless communication module built in, as specified
• Charging/download adapter
• Organic vapor zeroing kit
• Tedlar® bag for calibration
• Flex-I-Probe™
• External filter
• Rubber boot with straps
• Alkaline battery adapter
• Lamp-cleaning and tool kit
• Soft leather case

MONITOR WITH ACCESSORIES KIT:

• Hard transport case with pre-cut foam padding
• Charging/download cradle
• 5 Porous metal filters and O-rings
• Gas outlet port adapter and tubing

OPTIONAL CALIBRATION KIT ADDS:

• 10 ppm isobutylene calibration gas, 34L
• Calibration regulator and flow controller

OPTIONAL GUARANTEED COST-OF-OWNERSHIP PROGRAM:

• 4-year repair and replacement warranty
• Annual maintenance service

059-C110-000 ppbRAE 3000 Portable Handheld VOC Monitor - 10.6 eV Lamp, Li-Ion / Universal Charger by RAE Systems

The compact ppbRAE 3000 is a comprehensive VOC gas monitor and datalogger for hazardous environments. The ppbRAE 3000 is the most advanced handheld VOC monitor available for parts-per-billion detection. This third-generation patented PID device monitors VOCs using a photoionization detector with a 9.8 eV, 10.6 eV UV-discharge lamp.

The built-in wireless modem allows real-time data connectivity with the ProRAE Guardian command center located up to two miles/3 km away (with optional RAELink3 portable modem) from the ppbRAE 3000 detector.

Monitor only includes

• ppbRAE 3000 Monitor, with RAE Systems UV lamp, as specified
• Datalogging with ProRAE Studio II
• Charging/download adapter
• VOC Zeroing Tubes (1 box)
• Tube adapter
• Tedlar® bag for calibration
• Flex-I-Probe™
• External filter
• Rubber boot with straps
• Alkaline battery adapter
• Lamp-cleaning and tool kit
• Operation CDROM
• Operation & Maintenance manual
• Soft leather case

Monitor with accessories kit adds

• Hard transport case with pre-cut foam padding
• Charging/download cradle
• 5 porous metal filters and O-rings
• Organic vapor zeroing kit
• Gas outlet port adapter and tubing

Optional calibration kit adds

• 10 ppm isobutylene calibration gas, 34L
• Calibration regulator and flow controller

Optional Guaranteed Cost of Ownership Program

• 4-year repair and replacement guarantee
• Annual maintenance service

Key Features

• 3-second response time
• Extended range from 1 ppb to 10,000 ppm with best in class linearity
• Humidity compensation with integral humidity and temperature sensors
• Real-time wireless built-in - Bluetooth (and optional RAELink3 portable modem) or Mesh Network support
• Integrated Correction Factors list of 220 compounds more than any other PID
• Includes flashlight for dark conditions
• Large graphic display presents gas type, Correction Factor and concentration
• Easy access to battery, lamp and sensor in seconds without tools
• Rugged housing withstands use in harsh environments
• IP-67 waterproof design for easy cleaning and decontamination

Application

• Oil & Gas
• HazMat
• Industrial Safety
• Civil Defense
• Environmental & Indoor Air Quality

059-C110-100 ppbRAE 3000 Portable Handheld VOC Monitor - 10.6 eV Lamp, Li-Ion / Universal Charger, Accessories Kit, Calibration Kit by RAE Systems

The compact ppbRAE 3000 is a comprehensive VOC gas monitor and datalogger for hazardous environments. The ppbRAE 3000 is the most advanced handheld VOC monitor available for parts-per-billion detection. This third-generation patented PID device monitors VOCs using a photoionization detector with a 9.8 eV, 10.6 eV UV-discharge lamp.

The built-in wireless modem allows real-time data connectivity with the ProRAE Guardian command center located up to two miles/3 km away (with optional RAELink3 portable modem) from the ppbRAE 3000 detector.

Monitor only includes

• ppbRAE 3000 Monitor, with RAE Systems UV lamp, as specified
• Datalogging with ProRAE Studio II
• Charging/download adapter
• VOC Zeroing Tubes (1 box)
• Tube adapter
• Tedlar® bag for calibration
• Flex-I-Probe™
• External filter
• Rubber boot with straps
• Alkaline battery adapter
• Lamp-cleaning and tool kit
• Operation CDROM
• Operation & Maintenance manual
• Soft leather case

Monitor with accessories kit adds

• Hard transport case with pre-cut foam padding
• Charging/download cradle
• 5 porous metal filters and O-rings
• Organic vapor zeroing kit
• Gas outlet port adapter and tubing

Optional calibration kit adds

• 10 ppm isobutylene calibration gas, 34L
• Calibration regulator and flow controller

Optional Guaranteed Cost of Ownership Program

• 4-year repair and replacement guarantee
• Annual maintenance service

Key Features

• 3-second response time
• Extended range from 1 ppb to 10,000 ppm with best in class linearity
• Humidity compensation with integral humidity and temperature sensors
• Real-time wireless built-in - Bluetooth (and optional RAELink3 portable modem) or Mesh Network support
• Integrated Correction Factors list of 220 compounds more than any other PID
• Includes flashlight for dark conditions
• Large graphic display presents gas type, Correction Factor and concentration
• Easy access to battery, lamp and sensor in seconds without tools
• Rugged housing withstands use in harsh environments
• IP-67 waterproof design for easy cleaning and decontamination

Application

• Oil & Gas
• HazMat
• Industrial Safety
• Civil Defense
• Environmental & Indoor Air Quality

059-C111-100 ppbRAE 3000 Portable Handheld VOC Monitor - 10.6 eV Lamp, Li-Ion / Universal Charger, Accessories Kit, Calibration Kit, Wireless Bluetooth by RAE Systems

The compact ppbRAE 3000 is a comprehensive VOC gas monitor and datalogger for hazardous environments. The ppbRAE 3000 is the most advanced handheld VOC monitor available for parts-per-billion detection. This third-generation patented PID device monitors VOCs using a photoionization detector with a 9.8 eV, 10.6 eV UV-discharge lamp.

The built-in wireless modem allows real-time data connectivity with the ProRAE Guardian command center located up to two miles/3 km away (with optional RAELink3 portable modem) from the ppbRAE 3000 detector.

Monitor only includes

• ppbRAE 3000 Monitor, with RAE Systems UV lamp, as specified
• Datalogging with ProRAE Studio II
• Charging/download adapter
• VOC Zeroing Tubes (1 box)
• Tube adapter
• Tedlar® bag for calibration
• Flex-I-Probe™
• External filter
• Rubber boot with straps
• Alkaline battery adapter
• Lamp-cleaning and tool kit
• Operation CDROM
• Operation & Maintenance manual
• Soft leather case

Monitor with accessories kit adds

• Hard transport case with pre-cut foam padding
• Charging/download cradle
• 5 porous metal filters and O-rings
• Organic vapor zeroing kit
• Gas outlet port adapter and tubing

Optional calibration kit adds

• 10 ppm isobutylene calibration gas, 34L
• Calibration regulator and flow controller

Optional Guaranteed Cost of Ownership Program

• 4-year repair and replacement guarantee
• Annual maintenance service

Key Features

• 3-second response time
• Extended range from 1 ppb to 10,000 ppm with best in class linearity
• Humidity compensation with integral humidity and temperature sensors
• Real-time wireless built-in - Bluetooth (and optional RAELink3 portable modem) or Mesh Network support
• Integrated Correction Factors list of 220 compounds more than any other PID
• Includes flashlight for dark conditions
• Large graphic display presents gas type, Correction Factor and concentration
• Easy access to battery, lamp and sensor in seconds without tools
• Rugged housing withstands use in harsh environments
• IP-67 waterproof design for easy cleaning and decontamination

Application

• Oil & Gas
• HazMat
• Industrial Safety
• Civil Defense
• Environmental & Indoor Air Quality