Dissolved Oxygen Controllers

SCT-108.005.31 SCT-DO-MAXI Dissolved Oxygen Controller by ScichemTech

Includes:

• DO sensor
• Fixation clamps
• Instruction manual

Features:

• SCT-DO-(dissolved Oxygen) MAXI CONTROLLERS are designed with creativeness to get the elegance and produced with proper quality, and meets the specifications for the Water related applications with high level performance
• SCT-DO-(dissolved Oxygen) MAXI CONTROLLERS are an industrial instrument used for online analysis and monitoring.
• SCT-DO-(dissolved Oxygen) MAXI CONTROLLERS are made in a attractive pleasant colour with a Large and Clear blue white LCD Display
• SCT-DO-(dissolved Oxygen) MAXI CONTROLLERS are Microprocessor based controllers, which gives stable and accurate readings.
• SCT-DO-(dissolved Oxygen) MAXI CONTROLLERS uses Low power consumption and produce less internal heat.
• SCT-DO-(dissolved Oxygen) MAXI CONTROLLERS are has the polagraphic type DO electrode. This oxygen electrode is a diaphragm polarographic (clark) electrode. The conductibility electrolyte makes the polarization between cathode and anode. Between the cathode and the anode, the proper polarization voltage can deoxidize the O2 at the Cathode electrode. Cathode reaction: O2+ 2H2O +4e -- 4OH-, Anode reaction : 4AG +4Cl- -- 4AgCl + 4e. These chemical reactions produce the current which is proportional to the O2 in the test solution.
• SCT-DO-(dissolved Oxygen) MAXI CONTROLLERS has an isolated 4-20 mA current output
• SCT-DO-(dissolved Oxygen) MAXI CONTROLLERS are panel mount type of controllers.
• SCT-DO-(dissolved Oxygen) MAXI CONTROLLERS proved to work continuously in any harsh environmental conditions for the In line measurement and control of accurate CHLORINE value.
• SCT-DO-(dissolved Oxygen) MAXI CONTROLLERS has a major advantage that, no reagents are used. it has the direct measurement and readings

MA9072S Oxygen Membrane Electrolyte Refill Solution For Use with MA861 probe and MW605 Dissolved Oxygen Meter - 30 ml Bottle by Milwaukee

The MA9072S electrolyte fill solution is designed for Milwaukee's MA860 Galvanic Dissolved Oxygen probe and MA861 Dissolved Oxygen membranes. A high quality electrolyte solution is crucial to the performance of your dissolved oxygen probe.

DESIGN FEATURES

PRECISE FORMULATION

Factory mixed using reagent grade chemicals in a dedicated, temperature controlled environment.

TRACEABLE

Product labeled with product code, lot number and expiration date.

SECURE

Air tight bottle with tamper-proof seal.
Easy drop tip for accurate volume control.

EXTRA TIPS

• Watch for the membrane having wrinkles or stretch marks. If you see wrinkles, replace with a new membrane.
• Always use fresh electrolyte solution (MA9072S).

3921 DO/Temperature Controller by Jenco

DO & temperature controller with 2 sets of On/Off relays, stored calibration data, backlit LCD display for DO and temperature, universal power supply 100 to 240 VAC and packaged in an easy to install plastic panel mount water resistant 1/8 DIN IP65 case. Uses Hamilton Company Oxysens and Easyferm DO electrodes.

• Easy to install 1/8 DIN plastic casing
• Clear LCD displays dissolved oxygen or temperature with backlight
• Calibration data is stored in memory and is ready for use on power up
• Universal power supply input from 100 ~ 240 VAC
• Automatic or manual temperature compensation
• Two sets of programmable on/off relays for DO
• CE and RoHS complain

DO7400/H DO Sensor, PPB, HDPE, Pb Anode by Sensorex

Your Dissolved Oxygen (DO) sensor is a galvanic electrochemical device; i.e. it does not require power from your meter or controller to generate its signal. The DO sensor will provide a millivolt signal proportional to the concentration of oxygen in the water (model DO7400, DO7400TC) or 4-20mA current output (models DO7441 and DO7442). The signal output is proportional to ppm of oxygen for probes with millivolt signal output or changes linearly with ppm of oxygen sensors with 4-20mA output. The partial pressure of oxygen, which is directly proportional to the percent saturation of oxygen in a specified sample, can be calculated based upon the oxygen solubility which is a function of temperature, salinity, total atmospheric pressure, etc.

Your Dissolved Oxygen sensor consists of an cathode, anode and an electrolyte separated from your process fluid by an oxygen permeable membrane. The oxygen passing through the membrane reacts at the cathode, giving up electrons, which produces an electrical current.

DO7400/T DO Sensor, PPB, PTFE, Pb Anode by Sensorex

Your Dissolved Oxygen (DO) sensor is a galvanic electrochemical device; i.e. it does not require power from your meter or controller to generate its signal. The DO sensor will provide a millivolt signal proportional to the concentration of oxygen in the water (model DO7400, DO7400TC) or 4-20mA current output (models DO7441 and DO7442). The signal output is proportional to ppm of oxygen for probes with millivolt signal output or changes linearly with ppm of oxygen sensors with 4-20mA output. The partial pressure of oxygen, which is directly proportional to the percent saturation of oxygen in a specified sample, can be calculated based upon the oxygen solubility which is a function of temperature, salinity, total atmospheric pressure, etc.

Your Dissolved Oxygen sensor consists of an cathode, anode and an electrolyte separated from your process fluid by an oxygen permeable membrane. The oxygen passing through the membrane reacts at the cathode, giving up electrons, which produces an electrical current.

DO7400TC/H DO Sensor, HDPE Membrane, (low range) supplied with customer specified temperature element by Sensorex

Your Dissolved Oxygen (DO) sensor is a galvanic electrochemical device; i.e. it does not require power from your meter or controller to generate its signal. The DO sensor will provide a millivolt signal proportional to the concentration of oxygen in the water (model DO7400, DO7400TC) or 4-20mA current output (models DO7441 and DO7442). The signal output is proportional to ppm of oxygen for probes with millivolt signal output or changes linearly with ppm of oxygen sensors with 4-20mA output. The partial pressure of oxygen, which is directly proportional to the percent saturation of oxygen in a specified sample, can be calculated based upon the oxygen solubility which is a function of temperature, salinity, total atmospheric pressure, etc.

Your Dissolved Oxygen sensor consists of an cathode, anode and an electrolyte separated from your process fluid by an oxygen permeable membrane. The oxygen passing through the membrane reacts at the cathode, giving up electrons, which produces an electrical current.

DO7400TC/T DO Sensor, PTFE Membrane, (low range) supplied with customer specified temperature element by Sensorex

Your Dissolved Oxygen (DO) sensor is a galvanic electrochemical device; i.e. it does not require power from your meter or controller to generate its signal. The DO sensor will provide a millivolt signal proportional to the concentration of oxygen in the water (model DO7400, DO7400TC) or 4-20mA current output (models DO7441 and DO7442). The signal output is proportional to ppm of oxygen for probes with millivolt signal output or changes linearly with ppm of oxygen sensors with 4-20mA output. The partial pressure of oxygen, which is directly proportional to the percent saturation of oxygen in a specified sample, can be calculated based upon the oxygen solubility which is a function of temperature, salinity, total atmospheric pressure, etc.

Your Dissolved Oxygen sensor consists of an cathode, anode and an electrolyte separated from your process fluid by an oxygen permeable membrane. The oxygen passing through the membrane reacts at the cathode, giving up electrons, which produces an electrical current.

DO7441 DO Sensor, PPB, 4-20mA, 0-100%, PTFE, Pb by Sensorex

Your Dissolved Oxygen (DO) sensor is a galvanic electrochemical device; i.e. it does not require power from your meter or controller to generate its signal. The DO sensor will provide a millivolt signal proportional to the concentration of oxygen in the water (model DO7400, DO7400TC) or 4-20mA current output (models DO7441 and DO7442). The signal output is proportional to ppm of oxygen for probes with millivolt signal output or changes linearly with ppm of oxygen sensors with 4-20mA output. The partial pressure of oxygen, which is directly proportional to the percent saturation of oxygen in a specified sample, can be calculated based upon the oxygen solubility which is a function of temperature, salinity, total atmospheric pressure, etc.

Your Dissolved Oxygen sensor consists of an cathode, anode and an electrolyte separated from your process fluid by an oxygen permeable membrane. The oxygen passing through the membrane reacts at the cathode, giving up electrons, which produces an electrical current.

DO7442 DO Sensor, PPB, 4-20mA, 0-200%, PTFE, Pb by Sensorex

Your Dissolved Oxygen (DO) sensor is a galvanic electrochemical device; i.e. it does not require power from your meter or controller to generate its signal. The DO sensor will provide a millivolt signal proportional to the concentration of oxygen in the water (model DO7400, DO7400TC) or 4-20mA current output (models DO7441 and DO7442). The signal output is proportional to ppm of oxygen for probes with millivolt signal output or changes linearly with ppm of oxygen sensors with 4-20mA output. The partial pressure of oxygen, which is directly proportional to the percent saturation of oxygen in a specified sample, can be calculated based upon the oxygen solubility which is a function of temperature, salinity, total atmospheric pressure, etc.

Your Dissolved Oxygen sensor consists of an cathode, anode and an electrolyte separated from your process fluid by an oxygen permeable membrane. The oxygen passing through the membrane reacts at the cathode, giving up electrons, which produces an electrical current.

DO7442TC/T DO Sensor Lead Anode, 10ft, TL, TC= by Sensorex

Your Dissolved Oxygen (DO) sensor is a galvanic electrochemical device; i.e. it does not require power from your meter or controller to generate its signal. The DO sensor will provide a millivolt signal proportional to the concentration of oxygen in the water (model DO7400, DO7400TC) or 4-20mA current output (models DO7441 and DO7442). The signal output is proportional to ppm of oxygen for probes with millivolt signal output or changes linearly with ppm of oxygen sensors with 4-20mA output. The partial pressure of oxygen, which is directly proportional to the percent saturation of oxygen in a specified sample, can be calculated based upon the oxygen solubility which is a function of temperature, salinity, total atmospheric pressure, etc.

Your Dissolved Oxygen sensor consists of an cathode, anode and an electrolyte separated from your process fluid by an oxygen permeable membrane. The oxygen passing through the membrane reacts at the cathode, giving up electrons, which produces an electrical current.

GrowControl™ SXH Temp, pH, EC Transmitter by Agrowtek

GrowControl SXH is a precision digital sensor transmitter for temperature, pH, conductivity. SXH+ includes optional oxidation reduction potential or dissolved oxygen probe input. Optional color LCD display and button interface allows instant access to sensor readings, guided calibration, alarms, historical graphing and more.

Internal memory logs over 20,000 data points per sensor. Available with WiFi module for remote monitoring, data logging, alerts, and more. LX1 USB AgrowLink connects the GrowNET port to a PC for datalog download to .csv, graphing, calibration, configuration, updates, etc. using free PC software.

Connects to Agrowtek's GrowControl Cultivation Controllers as part of a complete facility control solution. LX2 ModLINK connects GrowNET™ devices to RS-422/485 for MODBUS RTU protocol.

Sensors

• Water Temperature: -20 - 60°C x 0.1°
• Conductivity: 0 - 5000uS x 10uS
• pH: 0 - 14pH x 0.01pH
• ORP or DO (+ model): +/-1000mv x 1mV; 0 - 20mg/mL x 0.1mg/mL
• Color LCD display for sensor monitoring & graphing optional
• Real Time Clock (RTC): Battery Backup Included

Features

• WiFi optional for direct sensor monitoring and web portal connection
• GrowNET link for connection to AgrowDose: Pumps or GrowControl™ master controller
• Available 4-20mA analog outputs: MODBUS RTU for industrial PLC applications
• Durable splash-proof ABS plastic enclosure: Conformal coated circuit boards
• 1-Year Warranty
• Made in USA

GrowControl™ SXHM Temp, pH, EC Transmitter by Agrowtek

GrowControl SXH is a precision digital sensor transmitter for temperature, pH, conductivity. SXH+ includes optional oxidation reduction potential or dissolved oxygen probe input. Optional color LCD display and button interface allows instant access to sensor readings, guided calibration, alarms, historical graphing and more.

Internal memory logs over 20,000 data points per sensor. Available with WiFi module for remote monitoring, data logging, alerts, and more. LX1 USB AgrowLink connects the GrowNET port to a PC for datalog download to .csv, graphing, calibration, configuration, updates, etc. using free PC software.

Connects to Agrowtek's GrowControl Cultivation Controllers as part of a complete facility control solution. LX2 ModLINK connects GrowNET™ devices to RS-422/485 for MODBUS RTU protocol.

Sensors

• Water Temperature: -20 - 60°C x 0.1°
• Conductivity: 0 - 5000uS x 10uS
• pH: 0 - 14pH x 0.01pH
• ORP or DO (+ model): +/-1000mv x 1mV; 0 - 20mg/mL x 0.1mg/mL
• Color LCD display for sensor monitoring & graphing optional
• Real Time Clock (RTC): Battery Backup Included

Features

• WiFi optional for direct sensor monitoring and web portal connection
• GrowNET link for connection to AgrowDose: Pumps or GrowControl™ master controller
• Available 4-20mA analog outputs: MODBUS RTU for industrial PLC applications
• Durable splash-proof ABS plastic enclosure: Conformal coated circuit boards
• 1-Year Warranty
• Made in USA

GrowControl™ SXHM+ Temp, pH, EC + ORP/DO Transmitter by Agrowtek

GrowControl SXH is a precision digital sensor transmitter for temperature, pH, conductivity. SXH+ includes optional oxidation reduction potential or dissolved oxygen probe input. Optional color LCD display and button interface allows instant access to sensor readings, guided calibration, alarms, historical graphing and more.

Internal memory logs over 20,000 data points per sensor. Available with WiFi module for remote monitoring, data logging, alerts, and more. LX1 USB AgrowLink connects the GrowNET port to a PC for datalog download to .csv, graphing, calibration, configuration, updates, etc. using free PC software.

Connects to Agrowtek's GrowControl Cultivation Controllers as part of a complete facility control solution. LX2 ModLINK connects GrowNET™ devices to RS-422/485 for MODBUS RTU protocol.

Sensors

• Water Temperature: -20 - 60°C x 0.1°
• Conductivity: 0 - 5000uS x 10uS
• pH: 0 - 14pH x 0.01pH
• ORP or DO (+ model): +/-1000mv x 1mV; 0 - 20mg/mL x 0.1mg/mL
• Color LCD display for sensor monitoring & graphing optional
• Real Time Clock (RTC): Battery Backup Included

Features

• WiFi optional for direct sensor monitoring and web portal connection
• GrowNET link for connection to AgrowDose: Pumps or GrowControl™ master controller
• Available 4-20mA analog outputs: MODBUS RTU for industrial PLC applications
• Durable splash-proof ABS plastic enclosure: Conformal coated circuit boards
• 1-Year Warranty
• Made in USA

GrowControl™ SXH+ Temp, pH, EC + ORP/DO Transmitter by Agrowtek

GrowControl SXH is a precision digital sensor transmitter for temperature, pH, conductivity. SXH+ includes optional oxidation reduction potential or dissolved oxygen probe input. Optional color LCD display and button interface allows instant access to sensor readings, guided calibration, alarms, historical graphing and more.

Internal memory logs over 20,000 data points per sensor. Available with WiFi module for remote monitoring, data logging, alerts, and more. LX1 USB AgrowLink connects the GrowNET port to a PC for datalog download to .csv, graphing, calibration, configuration, updates, etc. using free PC software.

Connects to Agrowtek's GrowControl Cultivation Controllers as part of a complete facility control solution. LX2 ModLINK connects GrowNET™ devices to RS-422/485 for MODBUS RTU protocol.

Sensors

• Water Temperature: -20 - 60°C x 0.1°
• Conductivity: 0 - 5000uS x 10uS
• pH: 0 - 14pH x 0.01pH
• ORP or DO (+ model): +/-1000mv x 1mV; 0 - 20mg/mL x 0.1mg/mL
• Color LCD display for sensor monitoring & graphing optional
• Real Time Clock (RTC): Battery Backup Included

Features

• WiFi optional for direct sensor monitoring and web portal connection
• GrowNET link for connection to AgrowDose: Pumps or GrowControl™ master controller
• Available 4-20mA analog outputs: MODBUS RTU for industrial PLC applications
• Durable splash-proof ABS plastic enclosure: Conformal coated circuit boards
• 1-Year Warranty
• Made in USA

GrowControl™ SXH pH/EC/Temp Hydroponics Sensor by Agrowtek

GrowControl SXH is a precision digital sensor transmitter for temperature, pH, conductivity. SXH+ includes optional oxidation reduction potential or dissolved oxygen probe input. Optional color LCD display and button interface allows instant access to sensor readings, guided calibration, alarms, historical graphing and more.

Internal memory logs over 20,000 data points per sensor. Available with WiFi module for remote monitoring, data logging, alerts, and more. LX1 USB AgrowLink connects the GrowNET port to a PC for datalog download to .csv, graphing, calibration, configuration, updates, etc. using free PC software.

Connects to Agrowtek's GrowControl Cultivation Controllers as part of a complete facility control solution. LX2 ModLINK connects GrowNET™ devices to RS-422/485 for MODBUS RTU protocol.

Sensors

• Water Temperature: -20 - 60°C x 0.1°
• Conductivity: 0 - 5000uS x 10uS
• pH: 0 - 14pH x 0.01pH
• ORP or DO (+ model): +/-1000mv x 1mV; 0 - 20mg/mL x 0.1mg/mL
• Color LCD display for sensor monitoring & graphing optional
• Real Time Clock (RTC): Battery Backup Included

Features

• WiFi optional for direct sensor monitoring and web portal connection
• GrowNET link for connection to AgrowDose: Pumps or GrowControl™ master controller
• Available 4-20mA analog outputs: MODBUS RTU for industrial PLC applications
• Durable splash-proof ABS plastic enclosure: Conformal coated circuit boards
• 1-Year Warranty
• Made in USA

WD-17106-20 InnoCal NIST-Traceable Calibration; pH Meter, Handheld/Benchtop by Oakton

Regulatory and quality agencies like FDA and EPA have strict guidelines for the determination and control of pH. Maintain your compliance with the help of InnoCal. We can calibrate new instrument purchases from Cole-Parmer, recalibrate your existing instruments, and provide maintenance and repair services.

InnoCal's metrologists can service most any brand of pH, conductivity, or dissolved oxygen meter including Oakton Instruments, accumet, Fisher Brand, Mettler-Toledo, YSI, WTW, Horiba, Hanna Instruments, Thermo Scientific Orion, VWR SympHony, and others.

Calibrations are performed on any handheld or benchtop pH meter with a BNC connection. The calibration contains five test points for pH (2, 4, 7, 10, 12) and five test points in millivolts across the range. If included, the automatic temperature compensation (ATC) probe will also be tested.

• Five electrical pH and mV test points

9430000 SL1000 - Portable Parallel Analyzer (PPA) by AquaPhoenix

Chloramination Testing Can be Done 75% Faster

The Hach SL1000 Portable Parallel Analyzer (PPA) performs the same tests with less than half the manual steps. Get highly accurate results, with less opportunity for errors, in a fraction of the time. Up to six parameters, tested in parallel. The SL1000 is a portable colorimeter that provides 75% faster testing in chloramination applications by using Chemkey reagents instead of powder pillows. All chemicals and processes are entirely contained inside the Chemkey.

Colorimetric tests include: monochloramine, free and total ammonia, free and total chlorine, nitrite, copper, orthophosphate, hardness, alkalinity, and dissolved iron.

NEW PARAMETERS include: Extended range chlorine (up to 10 mg/L), combined free and total ammonia (two measurements, one Chemkey), high range hardness, and peracetic acid. Probe-based tests include: pH, conductivity, ORP, dissolved oxygen, nitrate, fluoride (temperature is included with each probe).

Perform multiple tests faster - Complete more tests on site, get the results you need faster, allowing you to visit more sites in each shift. Perform up to four colorimetric and two probe-based measurements in parallel 75% faster than with other methods.

Less Variability - Automation and internal temperature control make the entire process consistent and repeatable, while applying the same processes as current Hach methods. Avoid manual steps that can introduce variability, even when performed by experienced testers.

Less Hassle - A single instrument combines colorimetric and probe-based testing in a field kit that requires fewer bulky accessories. All chemicals and processes are entirely contained inside the Chemkey. There are no powder pillows or glass vials to handle.