Digital Gauges

605 Digital Vacuum Gauge by Test Products International

Single input vacuum gauge. 12,000 to 15 micron measurement range. 300 PSI over pressure. A safer instrument for your job.

The 605 vacuum gauge measures vacuum in Microns for accurate evacuation of refrigeration systems. Please follow manufacturers recommendations on all HVAC equipment.

Features:

• Single input with 12000 to 15 micron range.
• Seven units of measure: Microns, PSI, InHg, mBar, Pascals, Torr, mTorr.
• Display: 5 digit.
• Auto Off: Conserve battery power
• Built in hanging hook and back magnets.

0560 5522 01 552 Digital Vacuum / Micron Gauge with Bluetooth by Testo

The testo 552 digital micron gauge is ideal for monitoring the evacuation of air conditioning, refrigeration, and heat pump systems. It is rich in features that make your work faster, easier, and more accurate.

Precise deep vacuum measurements, measuring down to single digit resolutions use optimized Pirani sensors. The testo 552 has real time calculations for the saturation temperature of water, which determines the proper micron/temperature levels at which moisture is removed from the system. These internal calculations inform you when/if the pressure is low enough to meet your evacuation target. This saves time and provides you with the assurance that the system is now free from moisture and contaminants. User defined alarm points alert you when target values are reached.

The new testo 552 with Bluetooth links to your smart phone or device. The testo 552 uses the free testo SMART Probes App which is a powerful and easy-to-use tool. It allows you to remotely read measurements of 1 to 6 Smart Probes including the testo 552. You can easily document / report the results.

• Precise and reliable vacuum measurements, 1 micron resolution
• Displays the saturation temperature of H2O to ensure full and proper evacuation
• Illuminated, backlit display with visual alarm for evacuation pressure
• Wireless Bluetooth communication to smart phone or tablet provides powerful analysis and reporting
• Display data, create reports, and send via email or SMS

0560 0550 549 Digital Manifold by Testo

The testo 549 sets new standards in performance and durability making it a breakthrough value. Digital accuracy assures that you have reliable readings on every job. The versatility of 60 on-board refrigerants means it is the only gauge that you need.

The proven, rugged design will give you years of dependable service. With optional temperature probes the testo 549 provides accurate, real-time superheat and sub-cooling at the push of a button.

Includes:

• 549 Digital Manifold
• Certificate of Conformity

• Measures high side / low side pressure and displays saturation / evaporation temperatures
• 2-way valve block with three connections and sight glass
• 60 refrigerant profiles stored in the instrument
• Large 2-line backlit display
• 2 year warranty - 3 years additional with registration

25555 Si-RM3 Wireless Digital Manifold by Sauermann

The Si-RM3 manifold comes with two pressure probes that accurately measure high side and low side pressure and two temperature probes that are used to accurately and simultaneously provide real-time superheat/sub cooling calculations.

Si-Manifold software is provided that instantly displays condensation/evaporation temperatures for up to 126 refrigerants.

DEVICE KEY FEATURES

Smart wireless manifold probes for pressure and temperature measurements in a refrigeration system.

• Light and curved design for easy plug-in to facilities
• Dual valve system for simultaneous measurement and charge/discharge of refrigerant
• Built-in Schrader® cores for easy refrigerant charging
• Range up to 60 bar (870 psi)
• Reduce the use of cumbersome hoses
• Overmoulding for easy handling and protection
• Two temperature clamps
• Long range wireless connection 4.2 low energy

SI-MANIFOLD APP KEY FEATURES

General features

• Clear interface for easy reading in any condition
• Gauge, table or graphic visualizations
• Creation of measurements report with possibility to add pictures
• Report exportation in PDF, CSV and XML formats
• Data logging
• Chronometer function
• Free app for iOS and Android devices
• Minimum required versions: Android 4.4, IOS 8.0, BLE 4.0

Manifold features

• Superheat and subcooling real time calculation
• Configuration of superheat/subcooling target values
• Heating and cooling functions
• 126 refrigerant gases with favorite list

Vacuum features

• Vacuum measurement function
• Configuration of vacuum target value
• Temperature of water evaporation

Kit Includes

• 2 pressure probes. Ref: Si-RM1
• 2 temperature probes. Ref: Si-RM2
• Adjustment certificate
• Simplified User Manual
• 6 AAA batteries
• Elastomer rings
• Soft case. Ref: Si-RM4

98766-97 Traceable Digital Manometer with Calibration; ±5 psi by Digi-Sense

This digital manometer, vacuum/pressure gauge, can read and display 11 different units of measure. Obtain either gauge pressure/vacuum or differential pressure measurements. The backlit digital display, 5/8" H LCD, is easy to read - even from 6-ft away. Typical response time is 0.5 seconds.

Features include RS-232 output for data acquisition (sold separately), REC function with count-up timer for Min/Max readings over a set period of time, and HOLD function to freeze the display.

Traceable® Products have an individually-numbered Traceable® Certificate provided with each unit, that assures accuracy from our ISO/IEC 17025:2017(1750.01) calibration laboratory accredited by A2LA. It indicates traceability of measurements to the SI units through NIST or other recognized national measurement institutes (NMI) that are signatories to the CIPM Mutual Recognition Agreement. Each product goes through an intense vetting process before it can carry the Traceable name, thus saving you both time and money by not having to calibrate separately.

Key Features

• Includes NIST-Traceable certificate from our A2LA accredited (1750.01) calibration laboratory
• Connect tubing with 1/16 to 3/16" (1.6 to 4.8 mm) inner diameter
• Obtain fast results - 0.5 second response time!
• Recall Min/Max readings and zero the meter with the press of a button
• Freeze the display with HOLD feature
• Export data to a PC through the data acquisition software (optional)

Includes

pressure sensor, two 19"L sections of flexible tubing, hard-sided carrying case, battery, and NIST-traceable calibration certificate with data.

98766-98 Traceable Digital Manometer with Calibration; ±15 psi by Digi-Sense

This digital manometer, vacuum/pressure gauge, can read and display 11 different units of measure. Obtain either gauge pressure/vacuum or differential pressure measurements. The backlit digital display, 5/8" H LCD, is easy to read - even from 6-ft away. Typical response time is 0.5 seconds.

Features include RS-232 output for data acquisition (sold separately), REC function with count-up timer for Min/Max readings over a set period of time, and HOLD function to freeze the display.

Traceable® Products have an individually-numbered Traceable® Certificate provided with each unit, that assures accuracy from our ISO/IEC 17025:2017(1750.01) calibration laboratory accredited by A2LA. It indicates traceability of measurements to the SI units through NIST or other recognized national measurement institutes (NMI) that are signatories to the CIPM Mutual Recognition Agreement. Each product goes through an intense vetting process before it can carry the Traceable name, thus saving you both time and money by not having to calibrate separately.

Key Features

• Includes NIST-Traceable certificate from our A2LA accredited (1750.01) calibration laboratory
• Connect tubing with 1/16 to 3/16" (1.6 to 4.8 mm) inner diameter
• Obtain fast results - 0.5 second response time!
• Recall Min/Max readings and zero the meter with the press of a button
• Freeze the display with HOLD feature
• Export data to a PC through the data acquisition software (optional)

Includes

pressure sensor, two 19"L sections of flexible tubing, hard-sided carrying case, battery, and NIST-traceable calibration certificate with data.

98766-99 Traceable Digital Manometer with Calibration; ±30 psi by Digi-Sense

This digital manometer, vacuum/pressure gauge, can read and display 11 different units of measure. Obtain either gauge pressure/vacuum or differential pressure measurements. The backlit digital display, 5/8" H LCD, is easy to read - even from 6-ft away. Typical response time is 0.5 seconds.

Features include RS-232 output for data acquisition (sold separately), REC function with count-up timer for Min/Max readings over a set period of time, and HOLD function to freeze the display.

Traceable® Products have an individually-numbered Traceable® Certificate provided with each unit, that assures accuracy from our ISO/IEC 17025:2017(1750.01) calibration laboratory accredited by A2LA. It indicates traceability of measurements to the SI units through NIST or other recognized national measurement institutes (NMI) that are signatories to the CIPM Mutual Recognition Agreement. Each product goes through an intense vetting process before it can carry the Traceable name, thus saving you both time and money by not having to calibrate separately.

Key Features

• Includes NIST-Traceable certificate from our A2LA accredited (1750.01) calibration laboratory
• Connect tubing with 1/16 to 3/16" (1.6 to 4.8 mm) inner diameter
• Obtain fast results - 0.5 second response time!
• Recall Min/Max readings and zero the meter with the press of a button
• Freeze the display with HOLD feature
• Export data to a PC through the data acquisition software (optional)

Includes

pressure sensor, two 19"L sections of flexible tubing, hard-sided carrying case, battery, and NIST-traceable calibration certificate with data.

98767-00 Traceable Digital Manometer with Calibration; ±100 psi by Digi-Sense

This digital manometer, vacuum/pressure gauge, can read and display 11 different units of measure. Obtain either gauge pressure/vacuum or differential pressure measurements. The backlit digital display, 5/8" H LCD, is easy to read - even from 6-ft away. Typical response time is 0.5 seconds.

Features include RS-232 output for data acquisition (sold separately), REC function with count-up timer for Min/Max readings over a set period of time, and HOLD function to freeze the display.

Traceable® Products have an individually-numbered Traceable® Certificate provided with each unit, that assures accuracy from our ISO/IEC 17025:2017(1750.01) calibration laboratory accredited by A2LA. It indicates traceability of measurements to the SI units through NIST or other recognized national measurement institutes (NMI) that are signatories to the CIPM Mutual Recognition Agreement. Each product goes through an intense vetting process before it can carry the Traceable name, thus saving you both time and money by not having to calibrate separately.

Key Features

• Includes NIST-Traceable certificate from our A2LA accredited (1750.01) calibration laboratory
• Connect tubing with 1/16 to 3/16" (1.6 to 4.8 mm) inner diameter
• Obtain fast results - 0.5 second response time!
• Recall Min/Max readings and zero the meter with the press of a button
• Freeze the display with HOLD feature
• Export data to a PC through the data acquisition software (optional)

Includes

pressure sensor, two 19"L sections of flexible tubing, hard-sided carrying case, battery, and NIST-traceable calibration certificate with data.

DGF1BAXACXB Pulsafeeder Digital Glycol Feeder, 50 Gallon by Quantrol

Pulsafeeder's Digital Glycol Feeder provides a consistent operating pressure in closed loop systems. This allows a controlled percentage of glycol solution to be fed from the 55 gallon tank. The Digital Glycol Feeder is available in two models; the DGF1 for single loop and the DGF2 for dual loop systems.

The control unit utilizes an 8-bit microcontroller for precise feed system control. The NEMA4X enclosure can be wired conduit or prewire for easy startup. The preplumbed assembly includes a pressure gauge, pressure switch, and pressure relief valve to prevent excessive pressure build up. A low liquid level switch with optional audible alarm prevents the gear pump from operating when the solution is low.

Each Digital Glycol Feeder is fully piped and wired with the following components:

Suction Assembly includes:

• PVC tubing and fittings
• PVC ball valve
• Clear poly bowl strainer

Discharge Assembly Includes:

• PVC pipe and fittings
• PVC ball valve
• PVC check valve
• Pressure gauge
• Brass relief valve with return to tank tubing

Controller Features

• Compact NEM4X enclosure for industrial applications
• Touch keypad user interface for gear pump operation
• LED indicators loss of pressure and low level
• HOA control of pumps and alarm to force relay OFF indefinitely or force relay ON for a period of 5 minutes
• Alarm silence feature
• Dual alarm relay outputs are factory configured for dry contact or powered
• Available in 115V or 230V
• Agency approved for US and Canada

Pump Features

• Heavy duty gear pump
• Bronze and stainless steel wetted components
• Close tolerance design allows for consistent performance
• Helical gears for quiet operation

System Features

• Economical design for competitive bid specifications

25558 Si-RM13 Wireless Digital Manifold - Full by Sauermann

This Si-RM13 combines the sturdiness of the analog manifold with digital smart wireless temperature and pressure probes.

This premium package includes a traditional 2-channel analog manifold body (by-pass type) with flexible hoses and a durable block made of anodised aluminum.

DEVICE KEY FEATURES

Smart wireless manifold probes for pressure and temperature measurements in a refrigeration system.

• Light and curved design for easy plug-in to facilities
• Dual valve system for simultaneous measurement and charge/discharge of refrigerant
• Built-in Schrader® cores for easy refrigerant charging
• Range up to 60 bar (870 psi)
• Reduce the use of cumbersome hoses
• Overmoulding for easy handling and protection
• Two temperature clamps
• Long range wireless connection low energy

2-channel manifold body (by-pass type) with flexible hoses and a full aluminium body designed for safety and perfect fit.

SI-MANIFOLD APP KEY FEATURES

General features

• Clear interface for easy reading in any condition
• Gauge, table or graphic visualizations
• Creation of measurements report with possibility to add pictures
• Report exportation in PDF, CSV and XML formats
• Data logging
• Chronometer function
• Free app for iOS and Android devices
• Minimum required versions: Android 4.4, IOS 8.0, BLE 4.0

Manifold features

• Superheat and subcooling real time calculation
• Configuration of superheat/subcooling target values
• Heating and cooling functions
• 126 refrigerant gases with favorite list

Vacuum features

• Vacuum measurement function
• Configuration of vacuum target value
• Temperature of water evaporation

Kit Includes

• 2 pressure probes. Ref: Si-RM1
• 2 temperature probes. Ref: Si-RM2
• 1 manifold body. Ref: ACC25561
• Set of three flexible hoses of 1 m (39") length with stop valves. Ref: ACC25831
• Adjustment certificate
• Simplified User Manual
• 6 AAA batteries
• Elastomer rings
• Robust transport case. Ref: ACC25563

25555-V Si-RM3V Wireless Digital Manifold + Vacuum Probe by Sauermann

The Si-RM3 manifold comes with two pressure probes that accurately measure high side and low side pressure and two temperature probes that are used to accurately and simultaneously provide real-time superheat/sub cooling calculations.

Si-Manifold software is provided that instantly displays condensation/evaporation temperatures for up to 126 refrigerants.

DEVICE KEY FEATURES

Smart wireless manifold probes for pressure and temperature measurements in a refrigeration system.

• Light and curved design for easy plug-in to facilities
• Dual valve system for simultaneous measurement and charge/discharge of refrigerant
• Built-in Schrader® cores for easy refrigerant charging
• Range up to 60 bar (870 psi)
• Reduce the use of cumbersome hoses
• Overmoulding for easy handling and protection
• Two temperature clamps
• Long range wireless connection 4.2 low energy

SI-MANIFOLD APP KEY FEATURES

General features

• Clear interface for easy reading in any condition
• Gauge, table or graphic visualizations
• Creation of measurements report with possibility to add pictures
• Report exportation in PDF, CSV and XML formats
• Data logging
• Chronometer function
• Free app for iOS and Android devices
• Minimum required versions: Android 4.4, IOS 8.0, BLE 4.0

Manifold features

• Superheat and subcooling real time calculation
• Configuration of superheat/subcooling target values
• Heating and cooling functions
• 126 refrigerant gases with favorite list

Vacuum features

• Vacuum measurement function
• Configuration of vacuum target value
• Temperature of water evaporation

Kit Includes

• 2 pressure probes. Ref: Si-RM1
• 2 temperature probes. Ref: Si-RM2
• Adjustment certificate
• Simplified User Manual
• 6 AAA batteries
• Elastomer rings
• Soft case. Ref: Si-RM4

98767-01 Traceable Printing Digital Manometer with Calibration; ±5 psi by Digi-Sense

This digital manometer, vacuum/pressure gauge, can read and display 11 different units of measure. Obtain either gauge pressure/vacuum or differential pressure measurements. The backlit digital display, 5/8" H LCD, is easy to read - even from 6-ft away. Typical response time is 0.5 seconds.

Create hard copies of data - on the spot with the integrated printer. Printouts includes date and time stamp to meet strict conformity requirements. Store up to 12,000 recordings in the memory, freeze the display with the HOLD feature, and recall MIN/MAX readings.

Traceable® Products have an individually-numbered Traceable® Certificate provided with each unit, that assures accuracy from our ISO/IEC 17025:2017(1750.01) calibration laboratory accredited by A2LA. It indicates traceability of measurements to the SI units through NIST or other recognized national measurement institutes (NMI) that are signatories to the CIPM Mutual Recognition Agreement. Each product goes through an intense vetting process before it can carry the Traceable name, thus saving you both time and money by not having to calibrate separately.

Key Features

• Includes NIST-Traceable certificate from our A2LA accredited (1750.01) calibration laboratory
• Record up to 12,000 readings
• Connect tubing with 1/16 to 3/16" (1.6 to 4.8 mm) inner diameter
• Obtain fast results - 0.5 second response time!
• Freeze the display with HOLD feature

Includes

pressure sensor, two 19"L sections of flexible tubing, hard-sided carrying case, roll of printer paper, battery, and NIST-traceable calibration certificate with data.

98767-02 Traceable Printing Digital Manometer with Calibration; ±100 psi by Digi-Sense

This digital manometer, vacuum/pressure gauge, can read and display 11 different units of measure. Obtain either gauge pressure/vacuum or differential pressure measurements. The backlit digital display, 5/8" H LCD, is easy to read - even from 6-ft away. Typical response time is 0.5 seconds.

Create hard copies of data - on the spot with the integrated printer. Printouts includes date and time stamp to meet strict conformity requirements. Store up to 12,000 recordings in the memory, freeze the display with the HOLD feature, and recall MIN/MAX readings.

Traceable® Products have an individually-numbered Traceable® Certificate provided with each unit, that assures accuracy from our ISO/IEC 17025:2017(1750.01) calibration laboratory accredited by A2LA. It indicates traceability of measurements to the SI units through NIST or other recognized national measurement institutes (NMI) that are signatories to the CIPM Mutual Recognition Agreement. Each product goes through an intense vetting process before it can carry the Traceable name, thus saving you both time and money by not having to calibrate separately.

Key Features

• Includes NIST-Traceable certificate from our A2LA accredited (1750.01) calibration laboratory
• Record up to 12,000 readings
• Connect tubing with 1/16 to 3/16" (1.6 to 4.8 mm) inner diameter
• Obtain fast results - 0.5 second response time!
• Freeze the display with HOLD feature

Includes

pressure sensor, two 19"L sections of flexible tubing, hard-sided carrying case, roll of printer paper, battery, and NIST-traceable calibration certificate with data.

DGF1BAAACXB Pulsafeeder Digital Glycol Feeder, 50 Gallon with Alarm Dry Contact by Quantrol

Pulsafeeder's Digital Glycol Feeder provides a consistent operating pressure in closed loop systems. This allows a controlled percentage of glycol solution to be fed from the 55 gallon tank. The Digital Glycol Feeder is available in two models; the DGF1 for single loop and the DGF2 for dual loop systems.

The control unit utilizes an 8-bit microcontroller for precise feed system control. The NEMA4X enclosure can be wired conduit or prewire for easy startup. The preplumbed assembly includes a pressure gauge, pressure switch, and pressure relief valve to prevent excessive pressure build up. A low liquid level switch with optional audible alarm prevents the gear pump from operating when the solution is low.

Each Digital Glycol Feeder is fully piped and wired with the following components:

Suction Assembly includes:

• PVC tubing and fittings
• PVC ball valve
• Clear poly bowl strainer

Discharge Assembly Includes:

• PVC pipe and fittings
• PVC ball valve
• PVC check valve
• Pressure gauge
• Brass relief valve with return to tank tubing

Controller Features

• Compact NEM4X enclosure for industrial applications
• Touch keypad user interface for gear pump operation
• LED indicators loss of pressure and low level
• HOA control of pumps and alarm to force relay OFF indefinitely or force relay ON for a period of 5 minutes
• Alarm silence feature
• Dual alarm relay outputs are factory configured for dry contact or powered
• Available in 115V or 230V
• Agency approved for US and Canada

Pump Features

• Heavy duty gear pump
• Bronze and stainless steel wetted components
• Close tolerance design allows for consistent performance
• Helical gears for quiet operation

System Features

• Economical design for competitive bid specifications

DGF1BBAACXB Pulsafeeder Digital Glycol Feeder, 50 Gallon with Audible Alarm & Dry Contact by Quantrol

Pulsafeeder's Digital Glycol Feeder provides a consistent operating pressure in closed loop systems. This allows a controlled percentage of glycol solution to be fed from the 55 gallon tank. The Digital Glycol Feeder is available in two models; the DGF1 for single loop and the DGF2 for dual loop systems.

The control unit utilizes an 8-bit microcontroller for precise feed system control. The NEMA4X enclosure can be wired conduit or prewire for easy startup. The preplumbed assembly includes a pressure gauge, pressure switch, and pressure relief valve to prevent excessive pressure build up. A low liquid level switch with optional audible alarm prevents the gear pump from operating when the solution is low.

Each Digital Glycol Feeder is fully piped and wired with the following components:

Suction Assembly includes:

• PVC tubing and fittings
• PVC ball valve
• Clear poly bowl strainer

Discharge Assembly Includes:

• PVC pipe and fittings
• PVC ball valve
• PVC check valve
• Pressure gauge
• Brass relief valve with return to tank tubing

Controller Features

• Compact NEM4X enclosure for industrial applications
• Touch keypad user interface for gear pump operation
• LED indicators loss of pressure and low level
• HOA control of pumps and alarm to force relay OFF indefinitely or force relay ON for a period of 5 minutes
• Alarm silence feature
• Dual alarm relay outputs are factory configured for dry contact or powered
• Available in 115V or 230V
• Agency approved for US and Canada

Pump Features

• Heavy duty gear pump
• Bronze and stainless steel wetted components
• Close tolerance design allows for consistent performance
• Helical gears for quiet operation

System Features

• Economical design for competitive bid specifications

DGF1BBXACXB Pulsafeeder Digital Glycol Feeder, 50 Gallon with Audible Alarm by Quantrol

Pulsafeeder's Digital Glycol Feeder provides a consistent operating pressure in closed loop systems. This allows a controlled percentage of glycol solution to be fed from the 55 gallon tank. The Digital Glycol Feeder is available in two models; the DGF1 for single loop and the DGF2 for dual loop systems.

The control unit utilizes an 8-bit microcontroller for precise feed system control. The NEMA4X enclosure can be wired conduit or prewire for easy startup. The preplumbed assembly includes a pressure gauge, pressure switch, and pressure relief valve to prevent excessive pressure build up. A low liquid level switch with optional audible alarm prevents the gear pump from operating when the solution is low.

Each Digital Glycol Feeder is fully piped and wired with the following components:

Suction Assembly includes:

• PVC tubing and fittings
• PVC ball valve
• Clear poly bowl strainer

Discharge Assembly Includes:

• PVC pipe and fittings
• PVC ball valve
• PVC check valve
• Pressure gauge
• Brass relief valve with return to tank tubing

Controller Features

• Compact NEM4X enclosure for industrial applications
• Touch keypad user interface for gear pump operation
• LED indicators loss of pressure and low level
• HOA control of pumps and alarm to force relay OFF indefinitely or force relay ON for a period of 5 minutes
• Alarm silence feature
• Dual alarm relay outputs are factory configured for dry contact or powered
• Available in 115V or 230V
• Agency approved for US and Canada

Pump Features

• Heavy duty gear pump
• Bronze and stainless steel wetted components
• Close tolerance design allows for consistent performance
• Helical gears for quiet operation

System Features

• Economical design for competitive bid specifications

0554 5520 MiniDIN Connection Cable by Testo

Three foot miniDIN connection cable. Designed to connect a testo 552 Digital Vacuum Gauge to a testo 570 Digital Manifold, which will provides a greater resolution vacuum readout when using the vacuum gauge on the testo 570. In addition, the cable will allow the 570 to print, as well as store measurements from the 552.

• For connecting compatible manifolds
• MiniDin connections on both sides

708C10 708 Combustion Efficiency Analyzer Kit by Test Products International

708 Features

• Fast purge & fuel selection during start up
• Work on high efficiency furnaces and oil
• Measure CO, O2; and calculate efficiency, CO2, excess air and CO air free
• Dual input temperature

Includes

• 621 Dual Differential Input Manometer
• A740 IR Printer
• Two GK13M K-Type General Purpose Beaded Tip Air Probe
• Two 605 Single Input Digital Vacuum Gauge
• Two A603 Brass Fitting

708C8 708 Combustion Efficiency Analyzer Kit by Test Products International

708 Features

• Fast purge & fuel selection during start up
• Work on high efficiency furnaces and oil
• Measure CO, O2; and calculate efficiency, CO2, excess air and CO air free
• Dual input temperature

Includes

• 708 Combustion Efficiency Analyzer
• 621 Dual Differential Input Manometer
• Two 605 Single Input Digital Vacuum Gauge
• A774 Silicone Pressure Tubing
• Two A776 Static Tip

WD-17040-10 InnoCal NIST-Traceable Calibration; Pressure/Vacuum Gauge, Accuracy ?1% by Oakton

If your experiment or process relies on pressure and vacuum measurements, make sure these instruments remain precise through regular calibrations. InnoCal® performs NIST-traceable pressure calibrations on absolute, gauge, and vacuum measuring instruments from:

• Gauge, Absolute and Differential Pressure from 0 to 20,000 psig (1.38 mPa)
• Vacuum from 0 to 29.2 in. Hg (986 mBar)
• Barometric pressure from 700 to 1100 mBar

We can calibrate all styles of pressure and vacuum equipment including analog/dial gauges, digital gauges, transducers and transmitters, pressure calibrators, manometers, barometers, deadweight testers, and pressure comparators.

InnoCal services all major brands of pressure equipment including Ashcroft®, WIKA®, Crystal Engineering, Fluke®, Druck, GE Sensing, Cole-Parmer®, Extech®, 3D Instruments™, and many more!

To meet your calibration needs:

• All calibration certificates contain as-found and as-left data, estimated measurement uncertainties (emu's), and test uncertainty ratios (TUR's) at no additional cost!
• This NIST-traceable calibration allows you to confirm that the specific asset you purchase meets the manufacturer's published specification
• EPA, USDA, ISO, and GLP/GMPs standards require regular NIST-Traceable calibration of all test equipment being used in critical applications, FDA compliant
• Receive your product calibrated and ready to use rather than sending it to a third-party or internal calibration lab and incurring additional delays

All measurements reported are traceable to SI units via national standards maintained by NIST and performed in compliance with ANSI Z540, ISO17025, and MIL-STD-45662A.

InnoCal is accredited to ISO/IEC 17025 by the American Association for Laboratory Accreditation (A2LA) under certificate number 1746.01. This accreditation is your assurance that the calibration is performed in a qualified, controlled laboratory.

Calibrations on pressure and vacuum gauges are performed using direct comparison against ultra-precise quartz reference transducers. Pressure measurements can be taken up to 20,000 psi and vacuum measurements down to 29.2 inches of Mercury. The calibration consists of 5 points upscale and 5 points downscale across the range of the instrument.

Galaxy GX2 Automated Test System by MSA

MSA is committed to providing the very best in sensor cell technology. From instrument design and manufacturing to datalogging and report generating software, MSA has consistently delivered products designed to optimize workplace safety and take an active approach to advancing jobsite performance. With the new Galaxy GX2 Automated Test System, MSA takes safety and technology to a whole new level.

Advanced MSA Link Pro Software

The MSA Link Pro Software is a state of the art datalogging system that allows users to analyze all data at any time. The software is easy to set up and configure to user specifications. The dashboard will provide alerts on all conditions, gas calibrations, and maintenance information (including expiration warnings). With the software, users can research data, generate reports, and send automatic email exposure alerts. Users can even generate live results or schedule emails for detector activities. Essentially, the datalogging capabilities allow worksite safety managers effectively and efficiently organize all data obtained throughout the entire gas detection fleet.

Simple User Friendly Design

The new Galaxy GX2 Automated Test System was designed with ease of use and simplicity in mind. The test system features an intuitive color touch screen for easy setup and viewing. The touch buttons are large and feature a scrolling screen with pop up test results. Simply place any compatible Galaxy gas detector onto the automated test system and the system will automatically test, calibrate, and charge. The system allows up to 10 devices and 4 cylinder holders. When using RFID-tagged gas cylinders, gas cylinder information is automatically entered into the system, and the onscreen gas cylinder pressure gauge can display multiple cylinder statuses at the same time.

Users can also see the testing and battery status of devices quickly through the colored LED indicators. With the simple time efficient automatic testing, the Galaxy GX2 Automated Test System can save users up to 50% of calibration costs.

Automated Test System Features

The Galaxy GX2 Automated Test System features 18 different languages with easy language setup options. The system is also optimized for use with MSA s high performing X-Cell Sensors. The advanced MSA X-Cell Sensor technology has a long life, quick bump test, fast calibration, and less clear times.

Galaxy GX2 Automated Test System Specifications

The Galaxy GX2 Automated Test System comes standard with pre-configured plugs, barbs, fresh air filters, spare parts kit, power supply and plug, Ethernet cable, and screen protector. MSA also offers nearly two dozen optional accessories that can be used to customize the automatic test system to meet individual workplace needs.

The automatic test system operates on 100-200 VAC (47-63 Hz). The entire unit is approximately 12 inches high and 6.5 inches wide.

The new Galaxy GX2 Automated Test System provides a simple and efficient approach to testing, calibration, and charging. With numerous user features, advanced software, optional accessories, and automatic cost reduction, the automated test system is an automatic choice for workplace safety managers.

0564 5652 01 565i - smart vacuum pump, 7 CFM by Testo

The future of the smart connected technician is now with the testo 565i Smart Vacuum Pump. With the integration of testo's core platform - the testo Smart App, paired with the testo 552i digital micron gauge via Bluetooth, evacuations on refrigeration systems and heat pumps are now fully automated. When the desired vacuum target is reached, the smart pump is stops automatically and a vacuum decay test begins. This unique feature allows technicians to confidently ensure the refrigeration circuit has no leaks - all shown live via the app. This means that evacuations can now be executed easier than ever!

Thanks to its compatibility with A2L and A3 refrigerants, the testo 565i Smart Vacuum Pump guarantees maximum safety at all times. Oil changes are simple with the clear glass indicator on the front of the pump to ensure oil is full and clean, so vacuums are reached more efficiently. The auto shutoff feature prevents the loss of vacuum in the event of a power failure by closing the valve automatically. Once power is restored, the pump can return to work and start where it left off, still maintaining the vacuum.

• Fully automated evacuation and decay test when paired with the testo 552i digital micron gauge*
• Safe use with flammable class A2L and A3 refrigerants
• One app for everything: Configure measurements, monitor and manage data with the testo Smart App
• Easy oil change. Inspection glass for quick assessment of the oil level
• Auto Shutoff – Prevents vacuum loss in case of power failure

Delivery Scope

• testo 565i Smart Vacuum Pump
• Oil bottle
• Calibration protocol and instruction manual

0564 5653 01 565i - smart vacuum pump, 10 CFM by Testo

The future of the smart connected technician is now with the testo 565i Smart Vacuum Pump. With the integration of testo's core platform - the testo Smart App, paired with the testo 552i digital micron gauge via Bluetooth, evacuations on refrigeration systems and heat pumps are now fully automated. When the desired vacuum target is reached, the smart pump is stops automatically and a vacuum decay test begins. This unique feature allows technicians to confidently ensure the refrigeration circuit has no leaks - all shown live via the app. This means that evacuations can now be executed easier than ever!

Thanks to its compatibility with A2L and A3 refrigerants, the testo 565i Smart Vacuum Pump guarantees maximum safety at all times. Oil changes are simple with the clear glass indicator on the front of the pump to ensure oil is full and clean, so vacuums are reached more efficiently. The auto shutoff feature prevents the loss of vacuum in the event of a power failure by closing the valve automatically. Once power is restored, the pump can return to work and start where it left off, still maintaining the vacuum.

• Fully automated evacuation and decay test when paired with the testo 552i digital micron gauge*
• Safe use with flammable class A2L and A3 refrigerants
• One app for everything: Configure measurements, monitor and manage data with the testo Smart App
• Easy oil change. Inspection glass for quick assessment of the oil level
• Auto Shutoff – Prevents vacuum loss in case of power failure

Delivery Scope

• testo 565i Smart Vacuum Pump
• Oil bottle
• Calibration protocol and instruction manual

WD-17040-30 InnoCal NIST-Traceable Calibration; Pressure/Vacuum Gauge, Accuracy ?1% by Oakton

If your experiment or process relies on pressure and vacuum measurements, make sure these instruments remain precise through regular calibrations. InnoCal® performs NIST-traceable pressure calibrations on absolute, gauge, and vacuum measuring instruments from:

• Gauge, Absolute and Differential Pressure from 0 to 20,000 psig (1.38 mPa)
• Vacuum from 0 to 29.2 in. Hg (986 mBar)
• Barometric pressure from 700 to 1100 mBar

We can calibrate all styles of pressure and vacuum equipment including analog/dial gauges, digital gauges, transducers and transmitters, pressure calibrators, manometers, barometers, deadweight testers, and pressure comparators.

InnoCal services all major brands of pressure equipment including Ashcroft®, WIKA®, Crystal Engineering, Fluke®, Druck, GE Sensing, Cole-Parmer®, Extech®, 3D Instruments™, and many more!

To meet your calibration needs:

• All calibration certificates contain as-found and as-left data, estimated measurement uncertainties (emu's), and test uncertainty ratios (TUR's) at no additional cost!
• This NIST-traceable calibration allows you to confirm that the specific asset you purchase meets the manufacturer's published specification
• EPA, USDA, ISO, and GLP/GMPs standards require regular NIST-Traceable calibration of all test equipment being used in critical applications, FDA compliant
• Receive your product calibrated and ready to use rather than sending it to a third-party or internal calibration lab and incurring additional delays

All measurements reported are traceable to SI units via national standards maintained by NIST and performed in compliance with ANSI Z540, ISO17025, and MIL-STD-45662A.

InnoCal is accredited to ISO/IEC 17025 by the American Association for Laboratory Accreditation (A2LA) under certificate number 1746.01. This accreditation is your assurance that the calibration is performed in a qualified, controlled laboratory.