Conductivity

SCT-108.005.03 SCT-EC-MINI Conductivity Mini Controller by ScichemTech

Includes:

• Conductivity probe
• Fixation clamps
• Instruction manual

Features:

• SCT EC MINI online Conductivity controller is an panel Instrument for online monitoring of Industrial process conductivity
• Simple and compact design
• Three ranges of conductivity measurements in on single controller
• Range switch over and constant check can be easily adjusted from the rear panel.
• Unique signal collecting and processing technology.
• Special think film circuit for accurate measurement and stable operations.
• Linearized data and automatic temperature compensations.
• In line measurement and control of conductivity.
• Conductivity electrode is supplied with 5 meter cable.

SCT-108.005.15 SCT-EC-MAXI - HR Conductivity Maxi Controller by ScichemTech

Includes:

• Conductivity sensor
• Fixation clamps
• Calibration Solution
• Instruction manual

Features:

• SCT-EC (Electrical Conductivity) MAXI-HR (High Range) CONTROLLERS are designed with creativeness to get the elegance and produced with proper quality, and meets the specifications for the Water related applications with high level performance.
• SCT-EC (Electrical Conductivity) MAXI-HR (High Range) CONTROLLERS are supplied with the suitable electrode with SCT standard 10 meters cable.(new series). 3 ranges of EC can be adjusted in a single controller and the ranges can be switched easily.
• SCT-EC (Electrical Conductivity) MAXI-HR (High Range) CONTROLLERS are an industrial instrument used for online analysis and monitoring.
• SCT-EC (Electrical Conductivity) MAXI-HR (High Range) CONTROLLERS are made in a attractive pleasant colour with a Large and Clear blue white LCD Display
• SCT-EC (Electrical Conductivity) MAXI-HR (High Range) CONTROLLERS are Microprocessor based controllers, which gives stable and accurate readings.
• SCT-EC (Electrical Conductivity) MAXI-HR (High Range) CONTROLLERS uses Low power consumption and produces less internal heat.
• SCT-EC (Electrical Conductivity) MAXI-HR (High Range) CONTROLLERS has an isolated 4-20 mA current output.
• SCT-EC (Electrical Conductivity) MAXI-HR (High Range) CONTROLLERS proved to work continuously in any harsh environmental conditions for the inline measurement and control of accurate EC value and it give the direct measurement and readings.

CX3100 Intelligent (High Temp) Conductivity Transmitter, 1/2 Din by Sensorex

The CX3100 replaces the Sensorex CX3000 as our conductivity, resistivity, TDS, and salinity monitoring instrument in a 1/2 DIN size.

This transmitter / controller is ideal for boiler applications, providing accurate temperature compensated readings up to 200°C (the highest of any of our instruments). With PT1000 temperature compensation, the CX3100 is compatible with Sensorex's best in class stainless steel boiler conductivity probes (CS675, CS676, and CS875).

The CX3100 features brand new firmware and an updated user interface with user friendly text and graphical illustrations. This makes the instrument more intuitive to use compared with the older CX3000.

Features:

• Monitor Conductivity, TDS, Resistivity or Salinity
• Programmable Hi/Hi, Hi/Lo, Lo/Lo Relays
• 2 analog 4-20mA outputs
• Automatic temperature compensation up to 200°C
• User friendly text and graphical illustrations

P-511 Conductivity Meter by Peak Instruments

Measure conductivity, TDS, salinity and resistivity of water solutions, suitable for industrial and mining factories, water treatment engineering and environmental protection, especially for outdoor use.

Main Features

• Large LCD screen with controllable white backlight.
• Built-in microprocessor chip with functions of auto calibration, auto temperature compensation, data storage, function setup, self-diagnosis, auto power off, low voltage display.
• Auto recognition of 8 standard conductivity solutions and there are two series of standard buffers for option: USA series, China series.
• Adopt advanced conductivity measurement technology, one point calibration of conductivity electrode can meet the measuring accuracy requirements for test 0.5μ S/cm ~ 200mS/cm.
• Able to switch between conductivity, TDS, salinity and resistivity. Multinomial calculation for TDS and salinity to ensure the conversion precision of the full scale.
• Conductivity mode has the function of non-linear temperature compensation for high purity water.
• Humanized designs like rack and skid proof shell make it more convenient for users.
• Plastic conductivity electrode with automatic temperature compensation to ensure fast and accurate result.
• Grade IP57 and provide optional carrying case.

L-511 Conductivity Meter by Peak Instruments

Main Features

• 5 inch LCD screen with wide 150° viewing angle, beautiful and compact design.
• Compact bench cradle with rotary electrode holder to save space in laboratory.
• Small size and portable make it easy to carry and remove in laboratory and outdoors.
• Extendibility: different electrodes can be installed to test pH, conductivity and dissolved oxygen.
• Auto recognition of different electrodes after electrode is connected.
• 3.5 mm jack input for electrodes makes it very easy for electrode connection.
• Two USB one SD card interfaces for power and data transfer.
• Can store 300 pieces of data including readings, date and time.
• Rechargeable and long lasting battery. Auto shut off if there is no operation in ten minutes.

EC700 Benchtop Conductivity Meter by Apera

The Apera Instruments EC700 Benchtop Conductivity Meter provides quick and stable pH readings for basic laboratory testing and educational purposes at an outstanding cost-effectiveness.

Reliable Measurement: With Apera's unique BPB (Brush-Resistant Platinum Black) conductivity electrode and the advanced digital processing technology, the measuring of conductivity and temperature is quick, accurate and stable in a wide measuring range (accuracy: ±1% F.S, Range: 0 to 200.00 mS/cm). IP54 Splash-proof and Dust-proof structure design, ideal for use in harsh environment.

Intelligent Functions: Quick& Easy Auto Calibration: automatically recognizes 8 types of conductivity standard solutions. 0 to 100°C auto temperature compensation. 50 groups of data storage. Max/Min measuring mode available, alternately displaying the maximum and minimum readings.

Comes with an easy-to-install electrode holder and 3 bottles of premixed conductivity calibration solutions (84 μS/cm, 1413 μS/cm, 12.88 μS/cm). The product is CE certified and comes with a Two-Year warranty for the meter; 6 months for the electrode.

Compatible Models: PH700, SX823-B, MP511, PH800, PC800

• Equipped with 2301T-S Combination Conductivity Electrode, Auto Temp. Compensation, measuring conductivity and temperature simultaneously
• Advanced Auto Calibration Mode with Calibration Guide and Self-Diagnosis
• Advanced digital processing technology helps generate quick and stable readings
• IP54 Spill-proof and Dust-proof, durable and reliable
• Comes with easy-to-install electrode holder and pre-mixed calibration solutions
• 50 Groups of Data Storage

SCT-108.002.C1 Conductivity Electrode by ScichemTech

• K=1.0 CM-1 ATC
• Suited for conductivity measurement of general water solution
• 8 pin connector

PENCON Conductivity Pen by Bluelab

The go-to for hand held conductivity meters.

The Bluelab® Conductivity Pen simply tells you the amount of nutrient in your solution. Conductivity is automatically compensated with the integrated temperature sensor.

Providing a compact, quick and accurate way to measure two key parameters for crop health.

Teamed with our Bluelab® pH Pen you have a robust, convenient and accurate measurement system.

Features

• Measures conductivity and temperature
• Selectable units for conductivity and temperature
• Shows conductivity scales CF, EC, PPM 500 & PPM 700 at the touch of a button
• Fully waterproof
• Backlit LCD display
• Calibration optional
• Successful 30 day calibration indicator
• Hold reading function
• Low battery indicator
• Auto off function
• Automatic temperature compensation
• 1x AAA replaceable battery included