Chlorine Analyzer

530210 VARIO Free Chlorine Reagent Set by AquaPhoenix

Lovibond® Vario Free Chlorine Reagent Set For Process Cl Analyzer

50610 SP-800 Portable Water Analyzer (Pyxis) by AquaPhoenix

Pyxis SP-800 Multiparameter Portable Colorimeter

The SP-800 is a multi-wavelength colorimeter specifically designed and suited for Municipal, Environmental and Industrial water analysis. It uses common colorimetric reagents and provides colorimetric measurements at 7 LED wavelengths. The SP-800 is pre-calibrated for colorimetric measurements of analyses common in industrial water treatment and other water testing in the laboratory or field environments, such as Chlorine, Phosphate, Iron, Copper and many others.

Key Features:

• Adding user defined methods via uPyxis PC app
• Data log downloadable via uPyxis apps
• Bluetooth enabled
• Display a concentration-time profile curve during color development.

Unique Tests:

• Direct Read Bleach Chlorine Concentration (0-16%)
• Direct Read Chlorine Dioxide Concentration (0-3,500ppm)
• Cyanide Free Zinc Method
• Peracetic Acid (PAA)

9430000 SL1000 - Portable Parallel Analyzer (PPA) by AquaPhoenix

Chloramination Testing Can be Done 75% Faster

The Hach SL1000 Portable Parallel Analyzer (PPA) performs the same tests with less than half the manual steps. Get highly accurate results, with less opportunity for errors, in a fraction of the time. Up to six parameters, tested in parallel. The SL1000 is a portable colorimeter that provides 75% faster testing in chloramination applications by using Chemkey reagents instead of powder pillows. All chemicals and processes are entirely contained inside the Chemkey.

Colorimetric tests include: monochloramine, free and total ammonia, free and total chlorine, nitrite, copper, orthophosphate, hardness, alkalinity, and dissolved iron.

NEW PARAMETERS include: Extended range chlorine (up to 10 mg/L), combined free and total ammonia (two measurements, one Chemkey), high range hardness, and peracetic acid. Probe-based tests include: pH, conductivity, ORP, dissolved oxygen, nitrate, fluoride (temperature is included with each probe).

Perform multiple tests faster - Complete more tests on site, get the results you need faster, allowing you to visit more sites in each shift. Perform up to four colorimetric and two probe-based measurements in parallel 75% faster than with other methods.

Less Variability - Automation and internal temperature control make the entire process consistent and repeatable, while applying the same processes as current Hach methods. Avoid manual steps that can introduce variability, even when performed by experienced testers.

Less Hassle - A single instrument combines colorimetric and probe-based testing in a field kit that requires fewer bulky accessories. All chemicals and processes are entirely contained inside the Chemkey. There are no powder pillows or glass vials to handle.

50603 Colorimeter, SP-910 Portable Water Analyzer (Fluorometer/Turbidimeter/Photometer) by AquaPhoenix

Pyxis SP-910 is a 3 in 1 portable water analyzer
Fluorometer / Colorimeter / Turbidimeter

Range: 0-300 ppb PTSA, 0-600 ppb Fluorescein
Colorimeter Wavelength: 420, 455, 525, 560, 570, and 610nm

• PTSA and Fluorescein - Measure PTSA and Fluorescein in the same meter for your traced programs in cooling and boiler applications.
• Calibrate ST-500 Directly - Calibrate a nearby ST-500 via built-in bluetooth after measuring sample concentration. No laptop or any other tool needed.
• LIVE Graphical Value Display Reduces/Eliminates Wait Time for Plateau Results
• Wireless Data Transfer to Cloud Data Management Capable
• User Defined Programs - User defined programs supported with non-linear calibration curves. 60+ programs including reagent-less nitrite and chlorine dioxide measurement.
• Battery Life Doubled - Six months or more under typical usage even equipped with higher resolution LCD readable in direct sunlight.
• Product Name / Direct Read (ppm) Programmable
• More Upgrades - Turbidity range extended to 0-100 and 0-1000 NTU with auto ranging. 16mm tube adaptor available for programs require digestion.
• New Test Capability - PAA (10-500 ppm), Direct Read Bleach Concentration (0-16%), Direct Read ClO2 (7.3-50ppm), MonoChlorAmine (0.1- 3.0 ppm), Non-hazardous Zinc

2263411 CL17 Total Chlorine Indicator Solution by AquaPhoenix

CL17 Total Chlorine Indicator Solution. Use with Total Chlorine Buffer Solution (2263511) and DPD Compound (2297255) for testing Total Chlorine using the CL17 Analyzer or bulk analytical methods. *This product has not been evaluated to test for chlorine and chloramines in medical applications in the United States.

Quality, Reliability
Simple, Predictable Maintenance
Reagent Delivery Program

2263511 CL17 Total Chlorine Buffer Solution by AquaPhoenix

CL17 Total Chlorine Buffer Solution. Use with Total Chlorine Indicator Solution (2263411) and DPD Compound (2297255) for testing Total Chlorine using the CL17 Analyzer or bulk analytical methods. *This product has not been evaluated to test for chlorine and chloramines in medical applications in the United States.

Quality, Reliability
Simple, Predictable Maintenance
Reagent Delivery Program

2314011 CL17 Free Chlorine Indicator Solution by AquaPhoenix

Quality, Reliability - Hach Free Chlorine Indicator Solution is specifically designed and produced to work with Hach CL17 Analyzers.
Simple, Predictable Maintenance - The CL17 is designed to require replacement of reagents on a predictable schedule under typical use. Maintenance can be performed in 15 minutes, and no special tools are required.

CL17 Free Chlorine Indicator Solution. Use with Free Chlorine Buffer Solution (2314111) and DPD Compound (2297255) for testing Free Chlorine using the CL17 Analyzer or bulk analytical methods.

2314111 CL17 Free Chlorine Buffer Solution by AquaPhoenix

Quality, Reliability - Hach Free Chlorine Buffer Solution is specifically designed and produced to work with Hach CL17 Analyzers.
Simple, Predictable Maintenance - The CL17 is designed to require replacement of reagents on a predictable schedule under typical use. Maintenance can be performed in 15 minutes, and no special tools are required.

CL17 Free Chlorine Buffer Solution. Use with Free Chlorine Indicator Solution (2314011) and DPD Compound (2297255) for testing Free Chlorine using the CL17 Analyzer or bulk analytical methods.

2556900 CL17 Free Chlorine Reagent Set by AquaPhoenix

Free Chlorine Reagent Set (includes DPD Indicator, and Free Chlorine Indicator and Buffer Solutions). Used with the CL17 Analyzer and bulk analytical methods. *This product has not been evaluated to test for chlorine and chloramines in medical applications in the United States.

Quality, Reliability
Simple, Predictable Maintenance
Reagent Delivery Program

2557000 CL17 Total Chlorine Reagent Set by AquaPhoenix

Quality, Reliability - Hach Total Chlorine Reagent Set (DPD Indicator, Total Chlorine Indicator and Buffer Solutions) is specifically designed and produced to work with Hach CL17 Analyzers.
Simple, Predictable Maintenance - The CL17 is designed to require replacement of reagents on a predictable schedule under typical use. Maintenance can be performed in 15 minutes, and no special tools are required.

Total Chlorine Reagent Set (includes DPD Indicator, and Total Chlorine Indicator and Buffer Solutions). Used with the CL17 Analyzer and bulk analytical methods.

CLD502 Amperometric Chlorine Dioxide Sensor, 0-2 ppm, 4-20mA by Sensorex

The CLD series (chlorine dioxide sensors) feature amperometric measurement technology. Designed for disinfection applications in water treatment, for use with chlorine dioxide, pools, etc., these sensors are available in two ranges for detecting ppm level of chlorine dioxide. Choose the CLD502 for 0-2ppm and CLD510 for 0-10ppm of chlorine dioxide.

Typical applications include:

• Industrial wastewater
• Cooling water
• Bottle Rinsing
• Irrigation water in agriculture

Sensors outpu a 4-20mA signal scaled to 0-2, 0-5, or 0-10ppm. Membrane cap and fill solution are easily replaceable to maximize sensor life.

Sensors can be used in new installations with Sensorex flow cell or installed as replacement for other 4-20mA output CIO2 sensors. (Consult Sensorex for compatibility).

An optional flow meter (FM001) is available to help provide consistent flow for added system stability.

Features

• Amperometric Sensor Technology
• Real Time Continuous Measurement
• Ranges 0-2 or 0-10ppm
• Built-In Temperature Compensation
• Large Electroylte Reservoir
• Replaceable Membrane and Electroylte

CLD505 Amperometric Chlorine Dioxide Sensor, 0-5 ppm, 4-20mA by Sensorex

The CLD series (chlorine dioxide sensors) feature amperometric measurement technology. Designed for disinfection applications in water treatment, for use with chlorine dioxide, pools, etc., these sensors are available in two ranges for detecting ppm level of chlorine dioxide. Choose the CLD502 for 0-2ppm and CLD510 for 0-10ppm of chlorine dioxide.

Typical applications include:

• Industrial wastewater
• Cooling water
• Bottle Rinsing
• Irrigation water in agriculture

Sensors outpu a 4-20mA signal scaled to 0-2, 0-5, or 0-10ppm. Membrane cap and fill solution are easily replaceable to maximize sensor life.

Sensors can be used in new installations with Sensorex flow cell or installed as replacement for other 4-20mA output CIO2 sensors. (Consult Sensorex for compatibility).

An optional flow meter (FM001) is available to help provide consistent flow for added system stability.

Features

• Amperometric Sensor Technology
• Real Time Continuous Measurement
• Ranges 0-2 or 0-10ppm
• Built-In Temperature Compensation
• Large Electroylte Reservoir
• Replaceable Membrane and Electroylte

CLD510 Amperometric Chlorine Dioxide Sensor, 0-10 ppm, 4-20mA by Sensorex

The CLD series (chlorine dioxide sensors) feature amperometric measurement technology. Designed for disinfection applications in water treatment, for use with chlorine dioxide, pools, etc., these sensors are available in two ranges for detecting ppm level of chlorine dioxide. Choose the CLD502 for 0-2ppm and CLD510 for 0-10ppm of chlorine dioxide.

Typical applications include:

• Industrial wastewater
• Cooling water
• Bottle Rinsing
• Irrigation water in agriculture

Sensors outpu a 4-20mA signal scaled to 0-2, 0-5, or 0-10ppm. Membrane cap and fill solution are easily replaceable to maximize sensor life.

Sensors can be used in new installations with Sensorex flow cell or installed as replacement for other 4-20mA output CIO2 sensors. (Consult Sensorex for compatibility).

An optional flow meter (FM001) is available to help provide consistent flow for added system stability.

Features

• Amperometric Sensor Technology
• Real Time Continuous Measurement
• Ranges 0-2 or 0-10ppm
• Built-In Temperature Compensation
• Large Electroylte Reservoir
• Replaceable Membrane and Electroylte

FCL502 Amperometric Free Chlorine Sensor, 0-2 ppm, Ver. 5 by Sensorex

The FCL series (free chlorine sensors) feature amperometric measurement technology. Designed for disinfection applications in water treatment, for pools, etc., these sensors are available in three ranges for detecting ppm level of free chlorine. Choose the FCL502 for 0-2ppm, FCL505 for 0-5ppm and FCL510 for 0-10ppm of free chlorine.

Typical applications include:

• Industrial wastewater
• Cooling water
• Bottle rinsing
• Irrigation water in agriculture

Sensors output a 4-20mA signal scaled to 0-2, 0-5 or 0-10ppm. Membrane cap and fill solution are easily replaceable to maximize sensor life.

Sensors can be used in new installations with Sensorex flow cell or installed as a replacement for other 4-20mA output free chlorine sensors (Consult with Sensorex for compatiblity).

An optional flow meter (FM001) is available to help provide consistent flow for added system stability.

Features

• Amperometric Sensor Technology
• Real Time Continuous Measurement
• Ranges: 0-2, 0-5 or 0-10ppm
• Built-In Temperature Compensation
• Large Electrolyte ReservoirReplaceable Membrane and Electrolyte

FCL505 Amperometric Free Chlorine Sensor, 0-5 ppm, Ver. 5 by Sensorex

The FCL series (free chlorine sensors) feature amperometric measurement technology. Designed for disinfection applications in water treatment, for pools, etc., these sensors are available in three ranges for detecting ppm level of free chlorine. Choose the FCL502 for 0-2ppm, FCL505 for 0-5ppm and FCL510 for 0-10ppm of free chlorine.

Typical applications include:

• Industrial wastewater
• Cooling water
• Bottle rinsing
• Irrigation water in agriculture

Sensors output a 4-20mA signal scaled to 0-2, 0-5 or 0-10ppm. Membrane cap and fill solution are easily replaceable to maximize sensor life.

Sensors can be used in new installations with Sensorex flow cell or installed as a replacement for other 4-20mA output free chlorine sensors (Consult with Sensorex for compatiblity).

An optional flow meter (FM001) is available to help provide consistent flow for added system stability.

Features

• Amperometric Sensor Technology
• Real Time Continuous Measurement
• Ranges: 0-2, 0-5 or 0-10ppm
• Built-In Temperature Compensation
• Large Electrolyte ReservoirReplaceable Membrane and Electrolyte

FCL510 Amperometric Free Chlorine Sensor, 0-10 ppm, Ver. 5 by Sensorex

The FCL series (free chlorine sensors) feature amperometric measurement technology. Designed for disinfection applications in water treatment, for pools, etc., these sensors are available in three ranges for detecting ppm level of free chlorine. Choose the FCL502 for 0-2ppm, FCL505 for 0-5ppm and FCL510 for 0-10ppm of free chlorine.

Typical applications include:

• Industrial wastewater
• Cooling water
• Bottle rinsing
• Irrigation water in agriculture

Sensors output a 4-20mA signal scaled to 0-2, 0-5 or 0-10ppm. Membrane cap and fill solution are easily replaceable to maximize sensor life.

Sensors can be used in new installations with Sensorex flow cell or installed as a replacement for other 4-20mA output free chlorine sensors (Consult with Sensorex for compatiblity).

An optional flow meter (FM001) is available to help provide consistent flow for added system stability.

Features

• Amperometric Sensor Technology
• Real Time Continuous Measurement
• Ranges: 0-2, 0-5 or 0-10ppm
• Built-In Temperature Compensation
• Large Electrolyte ReservoirReplaceable Membrane and Electrolyte

FCL510-MB1 Free Chlorine Sensor, 0-10ppm MB 485 12V by Sensorex

The FCL series (free chlorine sensors) feature amperometric measurement technology. Designed for disinfection applications in water treatment, for pools, etc., these sensors are available in three ranges for detecting ppm level of free chlorine. Choose the FCL502 for 0-2ppm, FCL505 for 0-5ppm and FCL510 for 0-10ppm of free chlorine.

Typical applications include:

• Industrial wastewater
• Cooling water
• Bottle rinsing
• Irrigation water in agriculture

Sensors output a 4-20mA signal scaled to 0-2, 0-5 or 0-10ppm. Membrane cap and fill solution are easily replaceable to maximize sensor life.

Sensors can be used in new installations with Sensorex flow cell or installed as a replacement for other 4-20mA output free chlorine sensors (Consult with Sensorex for compatiblity).

An optional flow meter (FM001) is available to help provide consistent flow for added system stability

• Amperometric Sensor Technology
• Real Time Continuous Measurement
• Ranges: 0-2, 0-5 or 0-10ppm
• Built-In Temperature Compensation
• Large Electrolyte Reservoir
• Replaceable Membrane and Electrolyte

FCL510-MB2 Free Chlorine Sensor, 0-10ppm MB 485 24V by Sensorex

The FCL series (free chlorine sensors) feature amperometric measurement technology. Designed for disinfection applications in water treatment, for pools, etc., these sensors are available in three ranges for detecting ppm level of free chlorine. Choose the FCL502 for 0-2ppm, FCL505 for 0-5ppm and FCL510 for 0-10ppm of free chlorine.

Typical applications include:

• Industrial wastewater
• Cooling water
• Bottle rinsing
• Irrigation water in agriculture

Sensors output a 4-20mA signal scaled to 0-2, 0-5 or 0-10ppm. Membrane cap and fill solution are easily replaceable to maximize sensor life.

Sensors can be used in new installations with Sensorex flow cell or installed as a replacement for other 4-20mA output free chlorine sensors (Consult with Sensorex for compatiblity).

An optional flow meter (FM001) is available to help provide consistent flow for added system stability

• Amperometric Sensor Technology
• Real Time Continuous Measurement
• Ranges: 0-2, 0-5 or 0-10ppm
• Built-In Temperature Compensation
• Large Electrolyte Reservoir
• Replaceable Membrane and Electrolyte

CLD502-MB Chlorine Dioxide Sensor, 485 Modbus output, 0-2 ppm, 10ft cable, Tinned Leads by Sensorex

The CLD series (chlorine dioxide sensors) feature amperometric measurement technology. Designed for disinfection applications in water treatment, for use with chlorine dioxide, pools, etc., these sensors are available in two ranges for detecting ppm level of chlorine dioxide. Choose the CLD502 for 0-2ppm and CLD510 for 0-10ppm of chlorine dioxide.

Typical applications include:

• Industrial wastewater
• Cooling water
• Bottle Rinsing
• Irrigation water in agriculture

Sensors outpu a 4-20mA signal scaled to 0-2, 0-5, or 0-10ppm. Membrane cap and fill solution are easily replaceable to maximize sensor life.

Sensors can be used in new installations with Sensorex flow cell or installed as replacement for other 4-20mA output CIO2 sensors. (Consult Sensorex for compatibility).

An optional flow meter (FM001) is available to help provide consistent flow for added system stability.

Features

• Amperometric Sensor Technology
• Real Time Continuous Measurement
• Ranges 0-2 or 0-10ppm
• Built-In Temperature Compensation
• Large Electroylte Reservoir
• Replaceable Membrane and Electroylte

CLD505-MB Chlorine Dioxide Sensor, 485 Modbus output, 0-5 ppm, 10ft cable, Tinned Leads by Sensorex

The CLD series (chlorine dioxide sensors) feature amperometric measurement technology. Designed for disinfection applications in water treatment, for use with chlorine dioxide, pools, etc., these sensors are available in two ranges for detecting ppm level of chlorine dioxide. Choose the CLD502 for 0-2ppm and CLD510 for 0-10ppm of chlorine dioxide.

Typical applications include:

• Industrial wastewater
• Cooling water
• Bottle Rinsing
• Irrigation water in agriculture

Sensors outpu a 4-20mA signal scaled to 0-2, 0-5, or 0-10ppm. Membrane cap and fill solution are easily replaceable to maximize sensor life.

Sensors can be used in new installations with Sensorex flow cell or installed as replacement for other 4-20mA output CIO2 sensors. (Consult Sensorex for compatibility).

An optional flow meter (FM001) is available to help provide consistent flow for added system stability.

Features

• Amperometric Sensor Technology
• Real Time Continuous Measurement
• Ranges 0-2 or 0-10ppm
• Built-In Temperature Compensation
• Large Electroylte Reservoir
• Replaceable Membrane and Electroylte

CLD510-MB Chlorine Dioxide Sensor, 485 Modbus output, 0-10 ppm, 10ft cable, Tinned Leads by Sensorex

The CLD series (chlorine dioxide sensors) feature amperometric measurement technology. Designed for disinfection applications in water treatment, for use with chlorine dioxide, pools, etc., these sensors are available in two ranges for detecting ppm level of chlorine dioxide. Choose the CLD502 for 0-2ppm and CLD510 for 0-10ppm of chlorine dioxide.

Typical applications include:

• Industrial wastewater
• Cooling water
• Bottle Rinsing
• Irrigation water in agriculture

Sensors outpu a 4-20mA signal scaled to 0-2, 0-5, or 0-10ppm. Membrane cap and fill solution are easily replaceable to maximize sensor life.

Sensors can be used in new installations with Sensorex flow cell or installed as replacement for other 4-20mA output CIO2 sensors. (Consult Sensorex for compatibility).

An optional flow meter (FM001) is available to help provide consistent flow for added system stability.

Features

• Amperometric Sensor Technology
• Real Time Continuous Measurement
• Ranges 0-2 or 0-10ppm
• Built-In Temperature Compensation
• Large Electroylte Reservoir
• Replaceable Membrane and Electroylte

FCL502-MA Free Chlorine Sensor, 4-20 mA output, 0-2 ppm, 10ft cable, Tinned Leads by Sensorex

The FCL series (free chlorine sensors) feature amperometric measurement technology. Designed for disinfection applications in water treatment, for pools, etc., these sensors are available in three ranges for detecting ppm level of free chlorine. Choose the FCL502 for 0-2ppm, FCL505 for 0-5ppm and FCL510 for 0-10ppm of free chlorine.

Typical applications include:

• Industrial wastewater
• Cooling water
• Bottle rinsing
• Irrigation water in agriculture

Sensors output a 4-20mA signal scaled to 0-2, 0-5 or 0-10ppm. Membrane cap and fill solution are easily replaceable to maximize sensor life.

Sensors can be used in new installations with Sensorex flow cell or installed as a replacement for other 4-20mA output free chlorine sensors (Consult with Sensorex for compatiblity).

An optional flow meter (FM001) is available to help provide consistent flow for added system stability.

Features

• Amperometric Sensor Technology
• Real Time Continuous Measurement
• Ranges: 0-2, 0-5 or 0-10ppm
• Built-In Temperature Compensation
• Large Electrolyte ReservoirReplaceable Membrane and Electrolyte

FCL502-MB Free Chlorine Sensor, 485 Modbus output, 0-2 ppm, 10ft cable, Tinned Leads by Sensorex

The FCL series (free chlorine sensors) feature amperometric measurement technology. Designed for disinfection applications in water treatment, for pools, etc., these sensors are available in three ranges for detecting ppm level of free chlorine. Choose the FCL502 for 0-2ppm, FCL505 for 0-5ppm and FCL510 for 0-10ppm of free chlorine.

Typical applications include:

• Industrial wastewater
• Cooling water
• Bottle rinsing
• Irrigation water in agriculture

Sensors output a 4-20mA signal scaled to 0-2, 0-5 or 0-10ppm. Membrane cap and fill solution are easily replaceable to maximize sensor life.

Sensors can be used in new installations with Sensorex flow cell or installed as a replacement for other 4-20mA output free chlorine sensors (Consult with Sensorex for compatiblity).

An optional flow meter (FM001) is available to help provide consistent flow for added system stability.

Features

• Amperometric Sensor Technology
• Real Time Continuous Measurement
• Ranges: 0-2, 0-5 or 0-10ppm
• Built-In Temperature Compensation
• Large Electrolyte ReservoirReplaceable Membrane and Electrolyte