C10 Gas Regulator

Multiflow Regulator

The 6000 Series regulators are for use with 58 liter and 103 liter non-refillable cylinders having a C-10 (5/8 -18 UNF) inlet connection. They may also be configured for use on returnable cylinders having pressures to 2400 PSIG. These aluminum-bodied, singlestage, piston-style regulators have eight flow settings from 0.2 LPM to 6 LPM. They are compatible with non-reactive as well as reactive gas mixtures like hydrogen sulfide, nitric oxide and ammonia. 1000 PSI gauges are used for non-refillable cyclinders and 3000 PSI gauges are used for refillable cylinders.

Part Number: 6170

Part Number: 75-DFR-1500

Part Number: 73-TPBR

Preset Flow Regulator

The 500 Series regulators are single-stage, piston-style, regulators designed to deliver a preset flow of non-reactive and low-level reactive (less than 100 PPM)* gas mixtures from 58 liter and 103 liter non-refillable cylinders having a 5/8 -18 UNF (C-10) inlet connection.

*Low-level reactive gases slowly react with the wetted brass parts of the 500 Series regulators. In order to minimize loss of calibration accuracy, the regulator must be removed from the cylinder after each use. Norlab s 6000 Series regulator is recommended for extended use with reactive calibration gas mixtures.

Part Number: 510

Preset Flow Regulator

The 500 Series regulators are single-stage, piston-style, regulators designed to deliver a preset flow of non-reactive and low-level reactive (less than 100 PPM)* gas mixtures from 58 liter and 103 liter non-refillable cylinders having a 5/8 -18 UNF (C-10) inlet connection.

*Low-level reactive gases slowly react with the wetted brass parts of the 500 Series regulators. In order to minimize loss of calibration accuracy, the regulator must be removed from the cylinder after each use. Norlab s 6000 Series regulator is recommended for extended use with reactive calibration gas mixtures.

Part Number: 511

Preset Flow Regulator

The 500 Series regulators are single-stage, piston-style, regulators designed to deliver a preset flow of non-reactive and low-level reactive (less than 100 PPM)* gas mixtures from 58 liter and 103 liter non-refillable cylinders having a 5/8 -18 UNF (C-10) inlet connection.

*Low-level reactive gases slowly react with the wetted brass parts of the 500 Series regulators. In order to minimize loss of calibration accuracy, the regulator must be removed from the cylinder after each use. Norlab s 6000 Series regulator is recommended for extended use with reactive calibration gas mixtures.

Part Number: 512

Preset Flow Regulator

The 500 Series regulators are single-stage, piston-style, regulators designed to deliver a preset flow of non-reactive and low-level reactive (less than 100 PPM)* gas mixtures from 58 liter and 103 liter non-refillable cylinders having a 5/8 -18 UNF (C-10) inlet connection.

*Low-level reactive gases slowly react with the wetted brass parts of the 500 Series regulators. In order to minimize loss of calibration accuracy, the regulator must be removed from the cylinder after each use. Norlab s 6000 Series regulator is recommended for extended use with reactive calibration gas mixtures.

Part Number: 513

Preset Flow Regulator

The 500 Series regulators are single-stage, piston-style, regulators designed to deliver a preset flow of non-reactive and low-level reactive (less than 100 PPM)* gas mixtures from 58 liter and 103 liter non-refillable cylinders having a 5/8 -18 UNF (C-10) inlet connection.

*Low-level reactive gases slowly react with the wetted brass parts of the 500 Series regulators. In order to minimize loss of calibration accuracy, the regulator must be removed from the cylinder after each use. Norlab s 6000 Series regulator is recommended for extended use with reactive calibration gas mixtures.

Part Number: 514

Preset Flow Regulator

The 500 Series regulators are single-stage, piston-style, regulators designed to deliver a preset flow of non-reactive and low-level reactive (less than 100 PPM)* gas mixtures from 58 liter and 103 liter non-refillable cylinders having a 5/8 -18 UNF (C-10) inlet connection.

*Low-level reactive gases slowly react with the wetted brass parts of the 500 Series regulators. In order to minimize loss of calibration accuracy, the regulator must be removed from the cylinder after each use. Norlab s 6000 Series regulator is recommended for extended use with reactive calibration gas mixtures.

Part Number: 515

Preset Flow Regulator

The 500 Series regulators are single-stage, piston-style, regulators designed to deliver a preset flow of non-reactive and low-level reactive (less than 100 PPM)* gas mixtures from 58 liter and 103 liter non-refillable cylinders having a 5/8 -18 UNF (C-10) inlet connection.

*Low-level reactive gases slowly react with the wetted brass parts of the 500 Series regulators. In order to minimize loss of calibration accuracy, the regulator must be removed from the cylinder after each use. Norlab s 6000 Series regulator is recommended for extended use with reactive calibration gas mixtures.

Part Number: 516

Preset Flow Regulator

The 500 Series regulators are single-stage, piston-style, regulators designed to deliver a preset flow of non-reactive and low-level reactive (less than 100 PPM)* gas mixtures from 58 liter and 103 liter non-refillable cylinders having a 5/8 -18 UNF (C-10) inlet connection.

*Low-level reactive gases slowly react with the wetted brass parts of the 500 Series regulators. In order to minimize loss of calibration accuracy, the regulator must be removed from the cylinder after each use. Norlab s 6000 Series regulator is recommended for extended use with reactive calibration gas mixtures.

Part Number: 517

Preset Flow Regulator

The 500 Series regulators are single-stage, piston-style, regulators designed to deliver a preset flow of non-reactive and low-level reactive (less than 100 PPM)* gas mixtures from 58 liter and 103 liter non-refillable cylinders having a 5/8 -18 UNF (C-10) inlet connection.

*Low-level reactive gases slowly react with the wetted brass parts of the 500 Series regulators. In order to minimize loss of calibration accuracy, the regulator must be removed from the cylinder after each use. Norlab s 6000 Series regulator is recommended for extended use with reactive calibration gas mixtures.

Part Number: 517ss

Preset Flow Regulator

The 500 Series regulators are single-stage, piston-style, regulators designed to deliver a preset flow of non-reactive and low-level reactive (less than 100 PPM)* gas mixtures from 58 liter and 103 liter non-refillable cylinders having a 5/8 -18 UNF (C-10) inlet connection.

*Low-level reactive gases slowly react with the wetted brass parts of the 500 Series regulators. In order to minimize loss of calibration accuracy, the regulator must be removed from the cylinder after each use. Norlab s 6000 Series regulator is recommended for extended use with reactive calibration gas mixtures.

Part Number: 517tr

Preset Flow Regulator

The 500 Series regulators are single-stage, piston-style, regulators designed to deliver a preset flow of non-reactive and low-level reactive (less than 100 PPM)* gas mixtures from 58 liter and 103 liter non-refillable cylinders having a 5/8 -18 UNF (C-10) inlet connection.

*Low-level reactive gases slowly react with the wetted brass parts of the 500 Series regulators. In order to minimize loss of calibration accuracy, the regulator must be removed from the cylinder after each use. Norlab s 6000 Series regulator is recommended for extended use with reactive calibration gas mixtures.

Part Number: 518

Multiflow Regulator

The 6000 Series regulators are for use with 58 liter and 103 liter non-refillable cylinders having a C-10 (5/8 -18 UNF) inlet connection. They may also be configured for use on returnable cylinders having pressures to 2400 PSIG. These aluminum-bodied, singlestage, piston-style regulators have eight flow settings from 0.2 LPM to 6 LPM. They are compatible with non-reactive as well as reactive gas mixtures like hydrogen sulfide, nitric oxide and ammonia. 1000 PSI gauges are used for non-refillable cyclinders and 3000 PSI gauges are used for refillable cylinders.

Part Number: 6330

Multiflow Regulator

The 6000 Series regulators are for use with 58 liter and 103 liter non-refillable cylinders having a C-10 (5/8 -18 UNF) inlet connection. They may also be configured for use on returnable cylinders having pressures to 2400 PSIG. These aluminum-bodied, singlestage, piston-style regulators have eight flow settings from 0.2 LPM to 6 LPM. They are compatible with non-reactive as well as reactive gas mixtures like hydrogen sulfide, nitric oxide and ammonia. 1000 PSI gauges are used for non-refillable cyclinders and 3000 PSI gauges are used for refillable cylinders.

Part Number: 6580

Multiflow Regulator

The 6000 Series regulators are for use with 58 liter and 103 liter non-refillable cylinders having a C-10 (5/8 -18 UNF) inlet connection. They may also be configured for use on returnable cylinders having pressures to 2400 PSIG. These aluminum-bodied, singlestage, piston-style regulators have eight flow settings from 0.2 LPM to 6 LPM. They are compatible with non-reactive as well as reactive gas mixtures like hydrogen sulfide, nitric oxide and ammonia. 1000 PSI gauges are used for non-refillable cyclinders and 3000 PSI gauges are used for refillable cylinders.

Part Number: 6590

Multiflow Regulator

The 6000 Series regulators are for use with 58 liter and 103 liter non-refillable cylinders having a C-10 (5/8 -18 UNF) inlet connection. They may also be configured for use on returnable cylinders having pressures to 2400 PSIG. These aluminum-bodied, singlestage, piston-style regulators have eight flow settings from 0.2 LPM to 6 LPM. They are compatible with non-reactive as well as reactive gas mixtures like hydrogen sulfide, nitric oxide and ammonia. 1000 PSI gauges are used for non-refillable cyclinders and 3000 PSI gauges are used for refillable cylinders.

Part Number: 6660

Multiflow Regulator

The 6000 Series regulators are for use with 58 liter and 103 liter non-refillable cylinders having a C-10 (5/8 -18 UNF) inlet connection. They may also be configured for use on returnable cylinders having pressures to 2400 PSIG. These aluminum-bodied, singlestage, piston-style regulators have eight flow settings from 0.2 LPM to 6 LPM. They are compatible with non-reactive as well as reactive gas mixtures like hydrogen sulfide, nitric oxide and ammonia. 1000 PSI gauges are used for non-refillable cyclinders and 3000 PSI gauges are used for refillable cylinders.

Part Number: 6350

Part Number: 75-DFR-SS