Bump Gas

Part Number: CGBUMPB

Part Number: CGBUMP2

Part Number: CGBUMPH25

• Rugged, ultra-compact (4.2 x 2.4 x 1.4 in / 10.7 x 6.0 x 3.6 cm) and lightweight (5.6 oz. / 160 g)
• Simple one-button operation
• Standard datalogger (16 hours) and eventlogger (10 events)
• Durable, stainless steel alligator clip
• Integral concussion-proof boot for the most rugged environments
• Continuous LCD shows simultaneous gas concentrations for H2S,CO, O2, and combustibles (0-100% LEL or 0-5.0% Methane)
• Powered by a lithium polymer battery (run-time typically 14 hours;recharge in less than 3 hours)
• Provides 95 dB alarm tone and bright wide-angled alarm bars
• Equipped with internal vibrating alarm for high noise areas
• Backlight: in alarm (auto) and on demand reactivation
• Four alarm levels: Instant Low and High Alarm for all gases;TWA (time weighted average) and STEL (short term exposure limit) for H2S, CO; OL (over limit alarm)
• Simple automatic calibration procedure
• Fully compatible with BW's MicroDock II automatic test and calibration system
• Records TWA, STEL and maximum exposures to gas and displays readings on command
• User selectable options include: confi dence beep, latching alarm, calibration due date, bump due date, "SAFE" display function, multi-language, span concentration values, combustible sensor measurement selection (0-100%LEL or 0-5.0% v/v methane) and stealth mode
• Full function self-test of: sensor, battery, circuitry and audible/visual/vibration alarms
• Delivered ready for use with sensors, lithium polymer battey, stainless steel alligator belt clip, calibration hose/cap and instructions

Part Number: CGBUMPGEN

Part Number: CGBUMPM100

Part Number: CGBUMPBK

Part Number: TEST-1A

Part Number: CGBUMP3

Part Number: A197150PA

Altair 2X Gas Detector by MSA

Introducing the ALTAIR 2X Gas Detector from MSA; the first one or two gas detector that incorporates industry-leading XCell Sensor Technology to deliver unparalleled performance while drastically minimizing total cost of ownership, increasing durability and delivering enhanced worker safety, compliance and traceability.

The Altair 2X is also the first portable gas detector to introduce revolutionary XCell Pulse Technology. Based on proven science and advanced patented sensor capabilities, the Altair 2XP detector delivers the world's first stand-alone bump test. This allows a daily bump test to be performed without the need for calibration accessories or specific calibration gas.

ALTAIR 2XP Gas Detector with xCell Pulse Technology

ALTAIR 2xT Two-Tox Gas Detector

ALTAIR 2X Single Gas Detector

Features & Benefits

Low cost of ownership

• Fastest sensor response times, lowest calibration gas flow rate on the market
• 4-year expected instrument & sensor life
• 3-year warranty on instrument & most sensors (2 years on Cl2, NH3)
• Stand-alone bump tests reduce maintenance, increase productivity (ALTAIR 2XP only)
• 1 device can monitor 2 gases (ALTAIR 2XT only)

Increased safety awareness & real-time compliance

• Stand-alone bump test anytime, anywhere without specific calibration gas (ALTAIR 2XP only)
• Bump pass: green LED flash every 15s, large on-screen checkmark
• Bump fail or expiration: red LED flash every 15s, no checkmark
• End-of-sensor-life warning and alarm

Full-time traceability

• Records 75 alarm events
• 150+ hours of periodic data (ALTAIR 2X and 2XP)
• 100+ hours of periodic data (ALTAIR 2XT)
• Compatible with MSA GALAXY® GX2 Automated Test System and MSA Link Pro software

Rugged durability

• Tough over-molded rubber armor
• Survives multiple 25-ft drops onto concrete
• Agency-certified dust- and water-tight IP67 construction
• Intrinsically-safe design

72-0304RK GX-2009 Personal Gas Monitor, 2 Gas, LEL / O2 with Alligator Clip, No Charger by RKI Instruments

Workplace safety is a top priority at RKI Industries. With a reputation as being a world leader in gas detection and sensor technology, the company invests heavily in their research and design team to develop the industry's leading workplace safety products. The GX-2009 Model Personal Four Gas Monitor utilizes advanced technology and efficient design. It is the world's smallest and lightest gas monitor.

The GX-2009 Model Personal Four Gas Monitor

The GX-2009 Model Personal Four Gas Monitor is an obvious choice for many particularly hazardous applications. From personal monitoring in confined spaces to its use in fire services and construction, the portable monitor has been rated intrinsically safe. Its noticeable alarm functions and simultaneous detection of four separate gases help to ensure the safety of workers in potentially dangerous situations. The state of the art monitor can detect LEL, O2, H2S, and CO simultaneously and display the results on the large LCD display screen.

Each of the miniature sensors are manufactured with the high quality control standards of RKI Instruments. The compact sensors utilize catalytic combustion, electrochemical, and galvanic sensor technology.

Alarm System

The unit features dual audible alarm ports at 95 dB, and three bright LED lights for noticeable alerts. The Personal Four Gas Monitor also utilizes an ultra strong vibration alert designed to notify users of atmospheric conditions even when the device cannot be heard. When the monitor is in alarm mode, the backlight on the LCD display is turned on. The multi-faceted alarm system is designed to be noticeable in any given situation and is sure to notify the user and those nearby.

Standard Features

The GX-2009 Model Personal Four Gas Monitor has many standard features including an incredible datalogging function. The datalogging software can store up to 100 calibration records and is compatible with many computer platforms. The log time can range from 10 to 300 hours and houses 8 alarm trends. The unit can also remind users of upcoming calibration and bump tests. With 2 glow in the dark, glove friendly buttons, users can easily operate the device on site.

The unit comes standard with an alligator clip, NiMH batteries, a charging station with VAC power supply, and a product CD with datalogging software.

Specifications

The GX-2009 Model Personal Four Gas Monitor is the smallest and lightest personal gas monitor in the world. Weighing in at less than 5 ounces, the device fits easily in the palm of a hand and is easily portable. Additionally, the IP-67 water resistant and dustproof design contains an impact resistant over mold rubber body to protect the integrity of the device. The unit uses a set of 2 NiMH batteries with 20 hours of operation. Each GX-2009 Model Personal Four Gas Monitor comes standard with a 2 year warranty for materials and workmanship.

*Please note we can only ship RKI products to customers within the United States

BWC3-H BW Clip 3 Year Single Gas Detector, Hydrogen Sulfide (H2S), Low - 10 ppm / High by BW Technologies

The BW Clip single-gas detector is your everyday companion for hazardous environments. It operates up to three years maintenance-free: Just turn on the device and it runs continuously - no need for calibration, sensor replacement, battery replacement or battery charging. That means great reliability and no downtime.

Plus, with the two-year BW Clip for H2S or CO, you can put the device in a hibernation case when you re not using it for a week or more - and extend its life by that period of time.

Compatible with both the MicroDock II and the IntelliDoX instrument management systems, the BW Clip is engineered to the highest standards of quality and reliability, keeping you safe and compliant.

Use our unique advanced technology for safety, compliance and productivity.

Surecell™: unique dual reservoir sensor design dramatically improves instrument performance, response time, and longevity compared to traditional electrochemical sensors and consistently delivers reliable instrument performance under the harshest environmental conditions

Reflex Technology™: advanced automated self-test function routinely checks the operating condition of the sensor to increase safety, up-time, and overall worker confidence

IntelliDoX: instrument management system

• The quickest bump test in the industry
• Confi guration of alarm set points and more
• Performing different tests for up to five BW Clip detectors at once - for maximum productivity
• Easy and accurate record-keeping

BW Clip Standard Features:

• Maintenance-free: no sensor or battery changes necessary
• Compact, lightweight design with one-button operation
• Designed for a range of harsh environments and extreme temperatures
• Hibernation mode with case accessory or IntelliDoX
• Automated self-test of battery, sensor and electronics
• Wide-angle flash, which alerts simultaneously with audible and vibrating alarm
• Automatic logging of the 35 most recent gas events and bump test results
• Compatible with MicroDock II and Fleet Manager II software
• Affordable, with low cost of ownership

Configureable Options:

• Configuration of high and low alarm set points before the device is activated
• Adjustment of alarm set points and other parameters as needed throughout the lifespan
• Option to enable the noncompliance indicator, which flashes red when a bump test is due or a gas event occurs
• Option to display gas reading during alarm
• User settable bump test reminder
• Option to display the Real Time Clock

Part Number: BWC3H

BWC2-H515 BW Clip 2 Year Single Gas Detector, Hydrogen Sulfide (H2S), Low - 5 ppm / High - 15 ppm by BW Technologies

Hydrogen sulfide (H2S) is flammable and toxic at relatively low concentrations. It is essential to keep this potentially dangerous gas at safe levels, at all times. That is why many workers trust the BWC2-H515 by BW Technologies. This portable H2S detector is one of the most reliable and cost effective models you can buy, and it will perform constantly for two solid years, without any maintenance. You do not have to be concerned with battery charging or sensor replacement. The BWC2-H515 has a high alarm when H2S levels reach 15 ppm and a low alarm at 5 ppm (these are default settings).

If you put your BWC2-H515 in storage, it will prolong its life. For instance, 60 days on the shelf provides an additional 60 days of service (up to one year).

Your BWC2-H515 will seamlessly fit in with Fleet Manager II software and MicroDock II systems. In addition, it works especially well with IntelliDoX instrument management systems, and here are some of the things you receive:

• Test as many as 5 sensors at once
• Quick and efficient recordkeeping
• Fast bump testing capabilities
• Parameter and alarm set adjustment

BW Clip Technology

Standard features:

• Light and easy to carry
• Virtually maintenance free
• Operates with a single push button
• Self-testing sensor and battery
• 95 db alarm can also flash or vibrate
• Can withstand extreme working environment
• Affordable operating cost
• Remembers 35 bump tests and gas events

Configuring Your BWC2-H515

Part Number: BWC2H515

Part Number: CGBUMPGENH

BWC2-X BW Clip 2 Year Single Gas Detector, Oxygen (O2), Low - 19.5% vol. / High - 23.5% vol. by BW Technologies

If you must monitor the oxygen in a work environment, you need the most accurate monitors you can buy. However, it's also necessary to have something that is light, portable, and simple to use. This makes it much easier on your workforce. The BW Clip BWC2-X is designed with these features in mind, and it is an affordable solution for portable O2 monitoring, that meets OHSA specifications.

The BWC2-X operates with the touch of a button and is so easy to use. Some monitors require battery charging and sensor changing periodically, but not the BWC2-X. Everything is built in and the monitor lasts for 2 full years of operation. Plus you also have six months of storage that extends its life, if needed. Once you activate and turn on the unit, it works constantly checking the air for oxygen levels. If they get below 19.5 percent, you receive an alarm, and over 23.5 percent sounds an alarm (default settings).

Compatible with MicroDock II and Fleet Manager II

• No computer necessary
• Testing for 5 monitors
• Simple fleet management
• Parameters and alarms can be adjusted
• Fast bump tests

Reflex Technology™ and Surecell™

• Surecell™ - Monitors oxygen levels in a wide range of temperatures. Functions in temperatures up to 122 Fahrenheit and cold environments with temperatures -4F (-20C).
• Reflex Technology™ - auto testing provides increased worker confidence and safety. Every day the monitor performs on board diagnostics.

Features:

• 2 year warranty
• Small, light, and compact
• Affordable
• One button operation that is tamper proof
• Loud 95 decibel alarm vibrates and flashes red can be seen 360 degrees.
• Tracks as many as 35 tests and readings

Options

Part Number: BWC2X

Part Number: A1053BG1