Area Monitor

Radiation Alert Area Monitor by SE International

The Radiation Alert® Area Monitor is one of the most user friendly, all inclusive, state of the art radiation area monitors available. The easy to use interface is an intelligent resistive touch screen display featuring a large five digit LED readout.

It comes with either an internal or external detector and free software for monitoring every Radiation Alert® Area Monitor on your network. Includes user selectable warning indicators for low and high radiation alarm levels, low battery, and detector failure. Setup email and text alerts to recieve alarms while on the go. All the settings are stored internally, even when power is disconnected. All units come with a Certificate of Conformance. NIST Source calibrations available upon request.

Detective + Transportable Area Monitor by Crowcon

Detective+ is a multi-gas temporary area monitor for use in turnaround/shutdown procedures, hotwork maintenance, confined space entry work and many other utility, construction and oil and gas industry applications. Go solo or link together using Detective Net or cables to form a perimeter, Detective+ gives a loud and clear alarm providing effective warning of gas hazards. The rugged, water and impact resistant design make Detective+ the ideal choice for your transportable gas detection needs.

Versatile and user friendly

• Infrared sensors available - Allows sampling of highly flammable gas levels and carbon dioxide Unaffected by poisoning and has a very fast response time
• Built in pump option - Provides sampling versatility
• Built-in display - Provides clear information, allows identification of gas hazard

Rugged, tripod design

• Raised sensor apertures - Prevents water ingress
• Triple leg design - Increases unit physical visibility and is the perfect height to allow 360 gas inlet
• Folding leg option - Allows stacking for easier storage and transportation
• IP65 specifications - Provides excellent sensor protection for use in challenging environments

Loud and clear alarms

• Network ready - Detective NET 25 units: 25 units can be networked together forming effective perimeter defence. When one alarms, all units on the network alarm. Detective+ with cables 12 units
• Intelligent & flexible - Units on the network can be placed up to 100m from each other. When in alarm the unit which triggered the alarm flashes faster than the others
• Audible and visible confidence blip - Provides guarantee to the user that the unit is functioning properly and that they are protected
• High visibilty - Vivid red LED clusters combine with an extra loud siren to give very clear alarm notifications
• Multiple beacons - Ensures 360° visibility

Note: Only toxic and oxygen sensor modules can be combined with IR modules, and only one IR module can be fitted per Detective Plus unit Single range flammable units can have up to three other sensor modules selected from the standard toxic and oxygen range. Dual range flammable units can have up to two other sensors.

*Reactive gases - extra care is required during sampling and calibration due to the nature of these gases. Contact technical support or review product manual.

** Only one biased sensor can be installed in a single instrument.

Care should be taken when configuring Cl2 sensors with H2S or SO2 due to cross sensitivity which may both poison sensors &/or give false alarms.

BZ1-4D00000111 Radius BZ1 Area Monitor by Industrial Scientific

When it comes to choosing equipment to protect your worksite from gas hazards, rely on the Radius® BZ1 Area Monitor. No other area monitor protects your workers longer in the field with less setup, user training, and time in the shop.

• Detect up to seven gases using 22 sensor options including PID
• Longest running area monitor with a typical run time of 7 days (168 hours)
• Extended Run Time Power Supply can extend battery to over 1 month
• Ultra-bright blue and red lights and attention-grabbing alarms with distinctive tones
• Audible alarms sound at 108 dB at 1 m to cut through high-noise environments
• Largest display of any area monitor on the market
• Intuitive text-based navigation and configuration
• Customizable alarm action messages such as "EVACUATE" or "VENTILATE"
• LENS™ Wireless enables communication between area monitors and Ventis® Pro5 personal monitors
• All-weather sensor deployment and 360-degree gas path for more accurate detection
• DualSense® Technology increases worker safety by using two sensors to detect the same gas

BZ1-7 Radius BZ1 Area Monitor, Cl2 by Industrial Scientific

When it comes to choosing equipment to protect your worksite from gas hazards, rely on the Radius® BZ1 Area Monitor. No other area monitor protects your workers longer in the field with less setup, user training, and time in the shop.

• Detect up to seven gases using 22 sensor options including PID
• Longest running area monitor with a typical run time of 7 days (168 hours)
• Extended Run Time Power Supply can extend battery to over 1 month
• Ultra-bright blue and red lights and attention-grabbing alarms with distinctive tones
• Audible alarms sound at 108 dB at 1 m to cut through high-noise environments
• Largest display of any area monitor on the market
• Intuitive text-based navigation and configuration
• Customizable alarm action messages such as "EVACUATE" or "VENTILATE"
• LENS™ Wireless enables communication between area monitors and Ventis® Pro5 personal monitors
• All-weather sensor deployment and 360-degree gas path for more accurate detection
• DualSense® Technology increases worker safety by using two sensors to detect the same gas

BZ1-8 Radius BZ1 Area Monitor, ClO2 by Industrial Scientific

When it comes to choosing equipment to protect your worksite from gas hazards, rely on the Radius® BZ1 Area Monitor. No other area monitor protects your workers longer in the field with less setup, user training, and time in the shop.

• Detect up to seven gases using 22 sensor options including PID
• Longest running area monitor with a typical run time of 7 days (168 hours)
• Extended Run Time Power Supply can extend battery to over 1 month
• Ultra-bright blue and red lights and attention-grabbing alarms with distinctive tones
• Audible alarms sound at 108 dB at 1 m to cut through high-noise environments
• Largest display of any area monitor on the market
• Intuitive text-based navigation and configuration
• Customizable alarm action messages such as "EVACUATE" or "VENTILATE"
• LENS™ Wireless enables communication between area monitors and Ventis® Pro5 personal monitors
• All-weather sensor deployment and 360-degree gas path for more accurate detection
• DualSense® Technology increases worker safety by using two sensors to detect the same gas

BZ1-9 Radius BZ1 Area Monitor, PH3 by Industrial Scientific

When it comes to choosing equipment to protect your worksite from gas hazards, rely on the Radius® BZ1 Area Monitor. No other area monitor protects your workers longer in the field with less setup, user training, and time in the shop.

• Detect up to seven gases using 22 sensor options including PID
• Longest running area monitor with a typical run time of 7 days (168 hours)
• Extended Run Time Power Supply can extend battery to over 1 month
• Ultra-bright blue and red lights and attention-grabbing alarms with distinctive tones
• Audible alarms sound at 108 dB at 1 m to cut through high-noise environments
• Largest display of any area monitor on the market
• Intuitive text-based navigation and configuration
• Customizable alarm action messages such as "EVACUATE" or "VENTILATE"
• LENS™ Wireless enables communication between area monitors and Ventis® Pro5 personal monitors
• All-weather sensor deployment and 360-degree gas path for more accurate detection
• DualSense® Technology increases worker safety by using two sensors to detect the same gas

BZ1-A Radius BZ1 Area Monitor, HCl by Industrial Scientific

When it comes to choosing equipment to protect your worksite from gas hazards, rely on the Radius® BZ1 Area Monitor. No other area monitor protects your workers longer in the field with less setup, user training, and time in the shop.

• Detect up to seven gases using 22 sensor options including PID
• Longest running area monitor with a typical run time of 7 days (168 hours)
• Extended Run Time Power Supply can extend battery to over 1 month
• Ultra-bright blue and red lights and attention-grabbing alarms with distinctive tones
• Audible alarms sound at 108 dB at 1 m to cut through high-noise environments
• Largest display of any area monitor on the market
• Intuitive text-based navigation and configuration
• Customizable alarm action messages such as "EVACUATE" or "VENTILATE"
• LENS™ Wireless enables communication between area monitors and Ventis® Pro5 personal monitors
• All-weather sensor deployment and 360-degree gas path for more accurate detection
• DualSense® Technology increases worker safety by using two sensors to detect the same gas

VN00800 X-zone 5800 Area Monitor, CATEX,H2S/CO-LC,O2,NIMH by Draeger

State-of-the-art area monitoring – the Draeger X-zone® 5800 in combination with the Draeger X-am® 5000, 5100, 5600, and 5800 gas detectors can be used for the measurement of up to six gases. The internal pump and continuous power supply in the explosive area of Zone 0 / C1D1 extend the range of applications in mobile gas detection technology.

Area monitor

• ?Combination with Draeger X-am® 5000, 5100, 5600 or 5800 – measurement of up to 6 gases
• Extensive area/fenceline monitoring up to 25 devices
• Option for permanent power supply in explosive areas (zone 1 / C1D1)

Innovative area monitoring

Even from a distance, the illuminated green LED ring indicates the air is free of monitored toxics and combustible gases. Upon detection of gas hazards, the LED color changes from green to red, thus providing a clear visual warning that gas is present. Additionally, a loud and highly audible evacuation alarm is emitted. The Draeger X-zone 5800 gas entry location permits gas to diffuse into the Draeger X-am 5000, 5100, 5600 and 5800 from all sides.

Wireless fenceline

Up to 25 Draeger X-zone 5800s can be automatically interconnected to form a wireless fenceline. The interconnection of the area monitoring devices allows for rapid establishment of safety networks for larger areas.

A Draeger X-zone 5800 area monitor detecting a gas alarm transmits the alarm signal to all interconnected units. A red flashing alarm in the unit detecting the gas contrasts with alternating red and green flashing alarms of the connected units. This provides simple recognition of alarm status and the actual location of the hazard.

With the corresponding configuration, the maximum gas concentration in the monitored area is shown on the display. Combined with the display of the X-zone ID a clear containment of the hazard area is possible.

Continuous operation of the X-zone for up to 120 hours – or even longer

The 24 Ah battery of the Draeger X-zone 5800 provides up to 120 hours of continuous operation – up to a complete working week.

The Power Supply Ex is available for continuous use of the X-zone 5800. It offers a 50 m (164 ft) supply from a safe area to a potentially explosive area and is approved for use with the X-Zone 5800 in zone 0 / C1D1 areas.

For safe transport, the cable of the Power Supply X is rolled up on a cable drum with the integrated power supply.

Pump or diffusion mode – suitable for your respective application

The X-zone 5800 offers two options for sampling gas: remote pump from 30 m (98 ft) for Zone 0 or diffusion. The pump or diffusion cover plate can be changed without tools.

Other benefits

• ?360° gas entry
• Approval for Ex Zone 0 / C1D1 areas
• Individually configurable with the Draeger CC-Vision PC software (e.g. alarm frequency)
• Inductive charging station: easy and convenient non-contact charging (outside the Ex-area)

Interfaces

?The interfaces on the back of the device offer the possibility of switching actuators in case of alarms by means of the configurable relay. The interface can also directly forward device data, such as measured values of sensors and alarms, via Modbus protocol. This allows you to integrate the devices into existing evaluation units.

VN00801 X-zone 5800 Area Monitor, CATEX,H2S/CO-LC,HCN,O2 PR,NIMH by Draeger

State-of-the-art area monitoring – the Draeger X-zone® 5800 in combination with the Draeger X-am® 5000, 5100, 5600, and 5800 gas detectors can be used for the measurement of up to six gases. The internal pump and continuous power supply in the explosive area of Zone 0 / C1D1 extend the range of applications in mobile gas detection technology.

Area monitor

• ?Combination with Draeger X-am® 5000, 5100, 5600 or 5800 – measurement of up to 6 gases
• Extensive area/fenceline monitoring up to 25 devices
• Option for permanent power supply in explosive areas (zone 1 / C1D1)

Innovative area monitoring

Even from a distance, the illuminated green LED ring indicates the air is free of monitored toxics and combustible gases. Upon detection of gas hazards, the LED color changes from green to red, thus providing a clear visual warning that gas is present. Additionally, a loud and highly audible evacuation alarm is emitted. The Draeger X-zone 5800 gas entry location permits gas to diffuse into the Draeger X-am 5000, 5100, 5600 and 5800 from all sides.

Wireless fenceline

Up to 25 Draeger X-zone 5800s can be automatically interconnected to form a wireless fenceline. The interconnection of the area monitoring devices allows for rapid establishment of safety networks for larger areas.

A Draeger X-zone 5800 area monitor detecting a gas alarm transmits the alarm signal to all interconnected units. A red flashing alarm in the unit detecting the gas contrasts with alternating red and green flashing alarms of the connected units. This provides simple recognition of alarm status and the actual location of the hazard.

With the corresponding configuration, the maximum gas concentration in the monitored area is shown on the display. Combined with the display of the X-zone ID a clear containment of the hazard area is possible.

Continuous operation of the X-zone for up to 120 hours – or even longer

The 24 Ah battery of the Draeger X-zone 5800 provides up to 120 hours of continuous operation – up to a complete working week.

The Power Supply Ex is available for continuous use of the X-zone 5800. It offers a 50 m (164 ft) supply from a safe area to a potentially explosive area and is approved for use with the X-Zone 5800 in zone 0 / C1D1 areas.

For safe transport, the cable of the Power Supply X is rolled up on a cable drum with the integrated power supply.

Pump or diffusion mode – suitable for your respective application

The X-zone 5800 offers two options for sampling gas: remote pump from 30 m (98 ft) for Zone 0 or diffusion. The pump or diffusion cover plate can be changed without tools.

Other benefits

• ?360° gas entry
• Approval for Ex Zone 0 / C1D1 areas
• Individually configurable with the Draeger CC-Vision PC software (e.g. alarm frequency)
• Inductive charging station: easy and convenient non-contact charging (outside the Ex-area)

Interfaces

?The interfaces on the back of the device offer the possibility of switching actuators in case of alarms by means of the configurable relay. The interface can also directly forward device data, such as measured values of sensors and alarms, via Modbus protocol. This allows you to integrate the devices into existing evaluation units.

VN00802 X-zone 5800 Area Monitor, CATEX,H2S/CO-LC,SO2,O2,NIMH by Draeger

State-of-the-art area monitoring – the Draeger X-zone® 5800 in combination with the Draeger X-am® 5000, 5100, 5600, and 5800 gas detectors can be used for the measurement of up to six gases. The internal pump and continuous power supply in the explosive area of Zone 0 / C1D1 extend the range of applications in mobile gas detection technology.

Area monitor

• ?Combination with Draeger X-am® 5000, 5100, 5600 or 5800 – measurement of up to 6 gases
• Extensive area/fenceline monitoring up to 25 devices
• Option for permanent power supply in explosive areas (zone 1 / C1D1)

Innovative area monitoring

Even from a distance, the illuminated green LED ring indicates the air is free of monitored toxics and combustible gases. Upon detection of gas hazards, the LED color changes from green to red, thus providing a clear visual warning that gas is present. Additionally, a loud and highly audible evacuation alarm is emitted. The Draeger X-zone 5800 gas entry location permits gas to diffuse into the Draeger X-am 5000, 5100, 5600 and 5800 from all sides.

Wireless fenceline

Up to 25 Draeger X-zone 5800s can be automatically interconnected to form a wireless fenceline. The interconnection of the area monitoring devices allows for rapid establishment of safety networks for larger areas.

A Draeger X-zone 5800 area monitor detecting a gas alarm transmits the alarm signal to all interconnected units. A red flashing alarm in the unit detecting the gas contrasts with alternating red and green flashing alarms of the connected units. This provides simple recognition of alarm status and the actual location of the hazard.

With the corresponding configuration, the maximum gas concentration in the monitored area is shown on the display. Combined with the display of the X-zone ID a clear containment of the hazard area is possible.

Continuous operation of the X-zone for up to 120 hours – or even longer

The 24 Ah battery of the Draeger X-zone 5800 provides up to 120 hours of continuous operation – up to a complete working week.

The Power Supply Ex is available for continuous use of the X-zone 5800. It offers a 50 m (164 ft) supply from a safe area to a potentially explosive area and is approved for use with the X-Zone 5800 in zone 0 / C1D1 areas.

For safe transport, the cable of the Power Supply X is rolled up on a cable drum with the integrated power supply.

Pump or diffusion mode – suitable for your respective application

The X-zone 5800 offers two options for sampling gas: remote pump from 30 m (98 ft) for Zone 0 or diffusion. The pump or diffusion cover plate can be changed without tools.

Other benefits

• ?360° gas entry
• Approval for Ex Zone 0 / C1D1 areas
• Individually configurable with the Draeger CC-Vision PC software (e.g. alarm frequency)
• Inductive charging station: easy and convenient non-contact charging (outside the Ex-area)

Interfaces

?The interfaces on the back of the device offer the possibility of switching actuators in case of alarms by means of the configurable relay. The interface can also directly forward device data, such as measured values of sensors and alarms, via Modbus protocol. This allows you to integrate the devices into existing evaluation units.

VN00847 X-zone 5800 Area Monitor, CATEX,O2/H2S-LC,CL2,CO,NIMH by Draeger

State-of-the-art area monitoring – the Draeger X-zone® 5800 in combination with the Draeger X-am® 5000, 5100, 5600, and 5800 gas detectors can be used for the measurement of up to six gases. The internal pump and continuous power supply in the explosive area of Zone 0 / C1D1 extend the range of applications in mobile gas detection technology.

Area monitor

• ?Combination with Draeger X-am® 5000, 5100, 5600 or 5800 – measurement of up to 6 gases
• Extensive area/fenceline monitoring up to 25 devices
• Option for permanent power supply in explosive areas (zone 1 / C1D1)

Innovative area monitoring

Even from a distance, the illuminated green LED ring indicates the air is free of monitored toxics and combustible gases. Upon detection of gas hazards, the LED color changes from green to red, thus providing a clear visual warning that gas is present. Additionally, a loud and highly audible evacuation alarm is emitted. The Draeger X-zone 5800 gas entry location permits gas to diffuse into the Draeger X-am 5000, 5100, 5600 and 5800 from all sides.

Wireless fenceline

Up to 25 Draeger X-zone 5800s can be automatically interconnected to form a wireless fenceline. The interconnection of the area monitoring devices allows for rapid establishment of safety networks for larger areas.

A Draeger X-zone 5800 area monitor detecting a gas alarm transmits the alarm signal to all interconnected units. A red flashing alarm in the unit detecting the gas contrasts with alternating red and green flashing alarms of the connected units. This provides simple recognition of alarm status and the actual location of the hazard.

With the corresponding configuration, the maximum gas concentration in the monitored area is shown on the display. Combined with the display of the X-zone ID a clear containment of the hazard area is possible.

Continuous operation of the X-zone for up to 120 hours – or even longer

The 24 Ah battery of the Draeger X-zone 5800 provides up to 120 hours of continuous operation – up to a complete working week.

The Power Supply Ex is available for continuous use of the X-zone 5800. It offers a 50 m (164 ft) supply from a safe area to a potentially explosive area and is approved for use with the X-Zone 5800 in zone 0 / C1D1 areas.

For safe transport, the cable of the Power Supply X is rolled up on a cable drum with the integrated power supply.

Pump or diffusion mode – suitable for your respective application

The X-zone 5800 offers two options for sampling gas: remote pump from 30 m (98 ft) for Zone 0 or diffusion. The pump or diffusion cover plate can be changed without tools.

Other benefits

• ?360° gas entry
• Approval for Ex Zone 0 / C1D1 areas
• Individually configurable with the Draeger CC-Vision PC software (e.g. alarm frequency)
• Inductive charging station: easy and convenient non-contact charging (outside the Ex-area)

Interfaces

?The interfaces on the back of the device offer the possibility of switching actuators in case of alarms by means of the configurable relay. The interface can also directly forward device data, such as measured values of sensors and alarms, via Modbus protocol. This allows you to integrate the devices into existing evaluation units.

VN00848 X-zone 5800 Area Monitor, PH3,NIMH by Draeger

State-of-the-art area monitoring – the Draeger X-zone® 5800 in combination with the Draeger X-am® 5000, 5100, 5600, and 5800 gas detectors can be used for the measurement of up to six gases. The internal pump and continuous power supply in the explosive area of Zone 0 / C1D1 extend the range of applications in mobile gas detection technology.

Area monitor

• ?Combination with Draeger X-am® 5000, 5100, 5600 or 5800 – measurement of up to 6 gases
• Extensive area/fenceline monitoring up to 25 devices
• Option for permanent power supply in explosive areas (zone 1 / C1D1)

Innovative area monitoring

Even from a distance, the illuminated green LED ring indicates the air is free of monitored toxics and combustible gases. Upon detection of gas hazards, the LED color changes from green to red, thus providing a clear visual warning that gas is present. Additionally, a loud and highly audible evacuation alarm is emitted. The Draeger X-zone 5800 gas entry location permits gas to diffuse into the Draeger X-am 5000, 5100, 5600 and 5800 from all sides.

Wireless fenceline

Up to 25 Draeger X-zone 5800s can be automatically interconnected to form a wireless fenceline. The interconnection of the area monitoring devices allows for rapid establishment of safety networks for larger areas.

A Draeger X-zone 5800 area monitor detecting a gas alarm transmits the alarm signal to all interconnected units. A red flashing alarm in the unit detecting the gas contrasts with alternating red and green flashing alarms of the connected units. This provides simple recognition of alarm status and the actual location of the hazard.

With the corresponding configuration, the maximum gas concentration in the monitored area is shown on the display. Combined with the display of the X-zone ID a clear containment of the hazard area is possible.

Continuous operation of the X-zone for up to 120 hours – or even longer

The 24 Ah battery of the Draeger X-zone 5800 provides up to 120 hours of continuous operation – up to a complete working week.

The Power Supply Ex is available for continuous use of the X-zone 5800. It offers a 50 m (164 ft) supply from a safe area to a potentially explosive area and is approved for use with the X-Zone 5800 in zone 0 / C1D1 areas.

For safe transport, the cable of the Power Supply X is rolled up on a cable drum with the integrated power supply.

Pump or diffusion mode – suitable for your respective application

The X-zone 5800 offers two options for sampling gas: remote pump from 30 m (98 ft) for Zone 0 or diffusion. The pump or diffusion cover plate can be changed without tools.

Other benefits

• ?360° gas entry
• Approval for Ex Zone 0 / C1D1 areas
• Individually configurable with the Draeger CC-Vision PC software (e.g. alarm frequency)
• Inductive charging station: easy and convenient non-contact charging (outside the Ex-area)

Interfaces

?The interfaces on the back of the device offer the possibility of switching actuators in case of alarms by means of the configurable relay. The interface can also directly forward device data, such as measured values of sensors and alarms, via Modbus protocol. This allows you to integrate the devices into existing evaluation units.

BZ1-0000030111 Radius BZ1 Area Monitor, O2, Without Pump, UL/CSA, LENS™ Wireless, English by Industrial Scientific

When it comes to choosing equipment to protect your worksite from gas hazards, rely on the Radius® BZ1 Area Monitor. No other area monitor protects your workers longer in the field with less setup, user training, and time in the shop.

• Detect up to seven gases using 22 sensor options including PID
• Longest running area monitor with a typical run time of 7 days (168 hours)
• Extended Run Time Power Supply can extend battery to over 1 month
• Ultra-bright blue and red lights and attention-grabbing alarms with distinctive tones
• Audible alarms sound at 108 dB at 1 m to cut through high-noise environments
• Largest display of any area monitor on the market
• Intuitive text-based navigation and configuration
• Customizable alarm action messages such as "EVACUATE" or "VENTILATE"
• LENS™ Wireless enables communication between area monitors and Ventis® Pro5 personal monitors
• All-weather sensor deployment and 360-degree gas path for more accurate detection
• DualSense® Technology increases worker safety by using two sensors to detect the same gas

BZ1-0000060101 Radius BZ1 Area Monitor, NH3, Without Pump, UL/CSA, Non-wireless, English by Industrial Scientific

When it comes to choosing equipment to protect your worksite from gas hazards, rely on the Radius® BZ1 Area Monitor. No other area monitor protects your workers longer in the field with less setup, user training, and time in the shop.

• Detect up to seven gases using 22 sensor options including PID
• Longest running area monitor with a typical run time of 7 days (168 hours)
• Extended Run Time Power Supply can extend battery to over 1 month
• Ultra-bright blue and red lights and attention-grabbing alarms with distinctive tones
• Audible alarms sound at 108 dB at 1 m to cut through high-noise environments
• Largest display of any area monitor on the market
• Intuitive text-based navigation and configuration
• Customizable alarm action messages such as "EVACUATE" or "VENTILATE"
• LENS™ Wireless enables communication between area monitors and Ventis® Pro5 personal monitors
• All-weather sensor deployment and 360-degree gas path for more accurate detection
• DualSense® Technology increases worker safety by using two sensors to detect the same gas

BZ1-0000070111 Radius BZ1 Area Monitor, Cl2, Without Pump, UL/CSA, LENS™ Wireless, English by Industrial Scientific

When it comes to choosing equipment to protect your worksite from gas hazards, rely on the Radius® BZ1 Area Monitor. No other area monitor protects your workers longer in the field with less setup, user training, and time in the shop.

• Detect up to seven gases using 22 sensor options including PID
• Longest running area monitor with a typical run time of 7 days (168 hours)
• Extended Run Time Power Supply can extend battery to over 1 month
• Ultra-bright blue and red lights and attention-grabbing alarms with distinctive tones
• Audible alarms sound at 108 dB at 1 m to cut through high-noise environments
• Largest display of any area monitor on the market
• Intuitive text-based navigation and configuration
• Customizable alarm action messages such as "EVACUATE" or "VENTILATE"
• LENS™ Wireless enables communication between area monitors and Ventis® Pro5 personal monitors
• All-weather sensor deployment and 360-degree gas path for more accurate detection
• DualSense® Technology increases worker safety by using two sensors to detect the same gas

BZ1-00000L0101 Radius BZ1 Area Monitor, LEL (Methane), No Pump, UL/CSA, English by Industrial Scientific

When it comes to choosing equipment to protect your worksite from gas hazards, rely on the Radius® BZ1 Area Monitor. No other area monitor protects your workers longer in the field with less setup, user training, and time in the shop.

• Detect up to seven gases using 22 sensor options including PID
• Longest running area monitor with a typical run time of 7 days (168 hours)
• Extended Run Time Power Supply can extend battery to over 1 month
• Ultra-bright blue and red lights and attention-grabbing alarms with distinctive tones
• Audible alarms sound at 108 dB at 1 m to cut through high-noise environments
• Largest display of any area monitor on the market
• Intuitive text-based navigation and configuration
• Customizable alarm action messages such as "EVACUATE" or "VENTILATE"
• LENS™ Wireless enables communication between area monitors and Ventis® Pro5 personal monitors
• All-weather sensor deployment and 360-degree gas path for more accurate detection
• DualSense® Technology increases worker safety by using two sensors to detect the same gas