1230

GHS1230 Health Hazard Class Pictogram Label (1/2"), 1820/Pad by GHS Safety

Provide your employees with a quick and easy way to identify Personal Protective Equipment & Hazard Class requirements. GHS labels are manufactured on a high gloss paper stock with pressure sensitive adhesive for ease of application and longer durability. Designed to be used with you in house labeling system where color printing isn't an option.

Make clean, professional looking labels in minutes. Labels are printed in sheets and padded with a cardboard backer for ease of use. Each sheet is perforated to allow removal when completed.

Labels are sold in pads. 1" diameter labels come 1,120 labels per pad. 1/2" diameter labels come 1,820 per pad.

TPPR-V-1230 Wall Mount Controller, 1200Hx800Wx300D, includes HMI, PCBs, SD Card; with Pre-drilled Mounting Plate by Honeywell Analytics

Honeywell's Touchpoint Pro makes gas control system design, installation, configuration and operation simple. Touchpoint Pro uses a 'building block' approach, providing unrivalled flexibility. The building block approach employed by Touchpoint Pro delivers real value by being able to adapt to each unique system requirement. Ease of use and intuitive configuration ensures that installation, set-up and ongoing maintenance costs are reduced, providing a 'no compromise' solution designed to reduce the cost of on-site safety.

Flexible architecture

Touchpoint Pro has been designed to deliver flexibility, allowing the system to be freely configured to meet customers' varying needs. Touchpoint Pro's modularity means that any system topology can be built, including centralised, distributed I/Os, or a mix of both.

24/7 visibility of system status

Touchpoint Pro's central controller has a Webserver interface, which can be accessed when it is connected to a network, allowing users to remotely view status and event history, and acknowledge, reset or inhibit channels. This feature offers the possibility of system monitoring and data analysis from a remote location using multiple devices including tablets, smart phones and remote computers.

Simple installation and maintenance

Using a simple building block technique to create your system, Touchpoint Pro offers multiple features that simplifies installation, setup and ongoing maintenance. A key feature to this is the preloaded sensor catalogue, which contains a complete listing of all Honeywell Analytics' gas sensors, each with a full default configuration setting. A user can choose to configure input channel settings from the sensor catalogue, resulting in a quick and simple three step configuration process. The rest of the configuration will be loaded automatically.

Wide selection of inputs/outputs accepted

The Touchpoint Pro Input/Output plug-in modules can be combined up to a maximum of 16 input modules (64 channels) and 32 output modules (128 channels). Modules can be located in any Touchpoint Pro enclosure and power distribution is via the communication/power Rail. Touchpoint Pro accepts analogue, digital and relay modules making it one of the most flexible controllers available.

Intuitive user interface

The heart of the Touchpoint Pro is the central controller, which includes the user interface. The user interface features a full colour LCD touch screen, and provides engineers with an intuitive solution to system set-up and deployment. Easily accessible icons, supported by drop-down menus ensure that even the most complex of system configurations can be commissioned with efficiency.

Aside from ease of use, Touchpoint Pro's user interface also includes some valuable aspects that help engineers save time, whilst setting up and commissioning a system.

Features & Benefits

• Webserver ensures 24/7 system status visibility for constant safety
• Flexible system architecture to meet specific site needs
• Easily accessible system status that can be seen at a glance

Quick Specs

• Up to 64 channels of detection and 128 output channels
• Digital and analogue inputs available
• Mulitple mounting possibilities
• Touchscreen user interface

3500-41541003 OEM - 3500 LED Blast/Helmet Light 100' Power Cord w/ small plug on one end by Western Technology

The 3500 LED - FIELD REPAIRABLE BLAST LIGHT is the best solution for abrasive blast lighting that gives the user the flexibility to do on the job field repairs. With the number of available and replaceable parts and accessories, this LED light will help reduce down time and get you back on the job. It is a must have tool for your abrasive blast lighting needs.

Features

• Light Output: 295 Lumens
• Brightness @ 48": 3110 Lux @ 8.5" Diameter
• Emitter Type: LED
• Color Temperature: +5500K
• Power Consumption: ~4 Watts
• Voltage Range: 12-30 VDC
• Light Body: Cast Aluminum
• Length: 4 3/8"
• Width: 2 5/8"
• Diameter: 2 5/8"
• Weight: 20 oz.
• Field Repairable Parts & Accessories (See Accessories)
• Battery Pack & Accessories (See Model 3510 LED)

3510LED-HLA 3510 LED Field Repairable Helmet Light Assembly by Western Technology

The 3510 LED - FIELD REPAIRABLE HELMET LIGHT is the best solution for abrasive blast Helmet lighting that gives the user the flexibility to do on the job field repairs. With the number of available and replaceable parts and accessories, this LED light will help reduce down time and get you back on the job. It is a must have tool for your abrasive blasting & job site lighting needs.

Features

• Light Output: 295 Lumens
• Brightness@48": 3110 Lux @ 8.5" Diameter
• Emitter Type: LED
• Color Temperature: +5500K
• Power Consumption: ~4 Watts
• Voltage Range: 12-30 VDC
• Light Body: Cast Aluminum
• Length: 2 3/4"
• Width: 2 1/4"
• Diameter: 2 5/8"
• Weight: 20 oz.
• Field Repairable Parts & Accessories (See Accessories)
• Battery Pack & Accessories (See Accessories)

3510LED-HLAP 3510 LED Field Repairable Helmet Light Assembly With Connector by Western Technology

The 3510 LED - FIELD REPAIRABLE HELMET LIGHT is the best solution for abrasive blast Helmet lighting that gives the user the flexibility to do on the job field repairs. With the number of available and replaceable parts and accessories, this LED light will help reduce down time and get you back on the job. It is a must have tool for your abrasive blasting & job site lighting needs.

Features

• Light Output: 295 Lumens
• Brightness@48": 3110 Lux @ 8.5" Diameter
• Emitter Type: LED
• Color Temperature: +5500K
• Power Consumption: ~4 Watts
• Voltage Range: 12-30 VDC
• Light Body: Cast Aluminum
• Length: 2 3/4"
• Width: 2 1/4"
• Diameter: 2 5/8"
• Weight: 20 oz.
• Field Repairable Parts & Accessories (See Accessories)
• Battery Pack & Accessories (See Accessories)

91210-01 Traceable Large-Display Dual-Channel Thermocouple Thermometer with Calibration by Digi-Sense

Monitor temperatures using two probes. Dual display simultaneously shows temperature of both probes or temperature of one probe and the difference between probes (T1-T2). With two separate sensors you can note temperature variations in an incubator/oven or temperature gradations in a water bath. Sense changes between inlet and outlet temperatures in any system. HOLD switch allows the display to be frozen to capture readings.

Temperature ranges are -50.0 to 1999°F and -50.0 to 1230°C. Resolution is 0.1° under 200° and 1° above 200. Meter only accuracy is 0.3% plus 1°C. Extra-large, 3/4-inch-high display is readable from 15 feet. Uses all Type-K thermocouple probes.

Chemical and shock-resistant case - ideal for quality control, measuring temperatures in wastewater, petroleum products, and biotechnology applications. Rugged case is chemical and shock-resistant ABS plastic.

Traceable® Products have an individually-numbered Traceable® Certificate provided with each unit, that assures accuracy from our ISO/IEC 17025:2017(1750.01) calibration laboratory accredited by A2LA. It indicates traceability of measurements to the SI units through NIST or other recognized national measurement institutes (NMI) that are signatories to the CIPM Mutual Recognition Agreement. Each product goes through an intense vetting process before it can carry the Traceable name, thus saving you both time and money by not having to calibrate separately.

• Includes NIST-Traceable certificate from our A2LA accredited (1750.01) calibration laboratory
• Dual display shows both probe temperatures
• Extra-large, 3/4-inch-high LCD digits

Includes

9-volt alkaline battery, two Type-K beaded probes, 4-ft cable, and NIST-traceable calibration certificate with data.

3500LEDS 3500LED Field Repairable LED Blast Light Assembly with Power Pack and 10' Cable by Western Technology

The 3500 LED - FIELD REPAIRABLE BLAST LIGHT is the best solution for abrasive blast lighting that gives the user the flexibility to do on the job field repairs. With the number of available and replaceable parts and accessories, this LED light will help reduce down time and get you back on the job. It is a must have tool for your abrasive blast lighting needs.

Features

• Light Output: 295 Lumens
• Brightness @ 48": 3110 Lux @ 8.5" Diameter
• Emitter Type: LED
• Color Temperature: +5500K
• Power Consumption: ~4 Watts
• Voltage Range: 12-30 VDC
• Light Body: Cast Aluminum
• Length: 4 3/8"
• Width: 2 5/8"
• Diameter: 2 5/8"
• Weight: 20 oz.
• Field Repairable Parts & Accessories (See Accessories)
• Battery Pack & Accessories (See Model 3510 LED)

3510LED-HLS 3510 LED Field Repairable Helmet Light Assembly with Battery Pack Assembly by Western Technology

The 3510 LED - FIELD REPAIRABLE HELMET LIGHT is the best solution for abrasive blast Helmet lighting that gives the user the flexibility to do on the job field repairs. With the number of available and replaceable parts and accessories, this LED light will help reduce down time and get you back on the job. It is a must have tool for your abrasive blasting & job site lighting needs.

Features

• Light Output: 295 Lumens
• Brightness@48": 3110 Lux @ 8.5" Diameter
• Emitter Type: LED
• Color Temperature: +5500K
• Power Consumption: ~4 Watts
• Voltage Range: 12-30 VDC
• Light Body: Cast Aluminum
• Length: 2 3/4"
• Width: 2 1/4"
• Diameter: 2 5/8"
• Weight: 20 oz.
• Field Repairable Parts & Accessories (See Accessories)
• Battery Pack & Accessories (See Accessories)

91210-03 Traceable Dual-Input/Output Thermocouple Thermometer with RS-232 and Calibration by Digi-Sense

Serial computer output allows thermometer to be connected to computer or data logger for capturing and storing results. Resolution is 0.1° (from -50.0 to 199.9°F) and 1° in both °C and °F over the entire range of -50 to 1999°F or -50 to 1230°C. Meter only accuracy is ±0.75% + 1°C. Memory recalls maximum and minimum readings. HOLD button freezes display for reading later. Dual channels permit monitoring two separate probes. Dual display simultaneously shows temperature of both probes or temperature of one probe and the difference between probes (T1-T2).

Supplied with two probes and case. Case is impact-resistant ABS plastic. Uses all Type-K thermocouple probes.

Traceable® Products have an individually-numbered Traceable® Certificate provided with each unit, that assures accuracy from our ISO/IEC 17025:2017(1750.01) calibration laboratory accredited by A2LA. It indicates traceability of measurements to the SI units through NIST or other recognized national measurement institutes (NMI) that are signatories to the CIPM Mutual Recognition Agreement. Each product goes through an intense vetting process before it can carry the Traceable name, thus saving you both time and money by not having to calibrate separately.

• Includes NIST-Traceable certificate from our A2LA accredited (1750.01) calibration laboratory
• Max/min temperature readings
• Uses all Type-K probes

Includes

two probes, 48" cable, 9-volt battery, and NIST-traceable calibration certificate with data.

3500LED10P 3500LED Field Repairable LED Blast Light Assembly with 10' Cable and Flat Plug by Western Technology

The 3500 LED - FIELD REPAIRABLE BLAST LIGHT is the best solution for abrasive blast lighting that gives the user the flexibility to do on the job field repairs. With the number of available and replaceable parts and accessories, this LED light will help reduce down time and get you back on the job. It is a must have tool for your abrasive blast lighting needs.

Features

• Light Output: 295 Lumens
• Brightness @ 48": 3110 Lux @ 8.5" Diameter
• Emitter Type: LED
• Color Temperature: +5500K
• Power Consumption: ~4 Watts
• Voltage Range: 12-30 VDC
• Light Body: Cast Aluminum
• Length: 4 3/8"
• Width: 2 5/8"
• Diameter: 2 5/8"
• Weight: 20 oz.
• Field Repairable Parts & Accessories (See Accessories)
• Battery Pack & Accessories (See Model 3510 LED)

3500LED10 LL OEM - 3500 Field Repairable LED Blast Light Assembly with 10' Cable - Low Light Version - light only by Western Technology

The 3500 LED - FIELD REPAIRABLE BLAST LIGHT is the best solution for abrasive blast lighting that gives the user the flexibility to do on the job field repairs. With the number of available and replaceable parts and accessories, this LED light will help reduce down time and get you back on the job. It is a must have tool for your abrasive blast lighting needs.

Features

• Light Output: 295 Lumens
• Brightness @ 48": 3110 Lux @ 8.5" Diameter
• Emitter Type: LED
• Color Temperature: +5500K
• Power Consumption: ~4 Watts
• Voltage Range: 12-30 VDC
• Light Body: Cast Aluminum
• Length: 4 3/8"
• Width: 2 5/8"
• Diameter: 2 5/8"
• Weight: 20 oz.
• Field Repairable Parts & Accessories (See Accessories)
• Battery Pack & Accessories (See Model 3510 LED)

3500LEDS50 3500LED Field Repairable LED Blast Light Includes Power Box and 50' Cable by Western Technology

The 3500 LED - FIELD REPAIRABLE BLAST LIGHT is the best solution for abrasive blast lighting that gives the user the flexibility to do on the job field repairs. With the number of available and replaceable parts and accessories, this LED light will help reduce down time and get you back on the job. It is a must have tool for your abrasive blast lighting needs.

Features

• Light Output: 295 Lumens
• Brightness @ 48": 3110 Lux @ 8.5" Diameter
• Emitter Type: LED
• Color Temperature: +5500K
• Power Consumption: ~4 Watts
• Voltage Range: 12-30 VDC
• Light Body: Cast Aluminum
• Length: 4 3/8"
• Width: 2 5/8"
• Diameter: 2 5/8"
• Weight: 20 oz.
• Field Repairable Parts & Accessories (See Accessories)
• Battery Pack & Accessories (See Model 3510 LED)

3500LED100 WP OEM - 3500 Field Repairable LED Blast Light Assembly with 100' Cable and miniature twist lock plug (Spliced) - no power box by Western Technology

The 3500 LED - FIELD REPAIRABLE BLAST LIGHT is the best solution for abrasive blast lighting that gives the user the flexibility to do on the job field repairs. With the number of available and replaceable parts and accessories, this LED light will help reduce down time and get you back on the job. It is a must have tool for your abrasive blast lighting needs.

Features

• Light Output: 295 Lumens
• Brightness @ 48": 3110 Lux @ 8.5" Diameter
• Emitter Type: LED
• Color Temperature: +5500K
• Power Consumption: ~4 Watts
• Voltage Range: 12-30 VDC
• Light Body: Cast Aluminum
• Length: 4 3/8"
• Width: 2 5/8"
• Diameter: 2 5/8"
• Weight: 20 oz.
• Field Repairable Parts & Accessories (See Accessories)
• Battery Pack & Accessories (See Model 3510 LED)

3500LED100 3500LED Field Repairable LED Blast Light Assembly with 100ft Cable and Flat Connector at 10ft by Western Technology

The 3500 LED - FIELD REPAIRABLE BLAST LIGHT is the best solution for abrasive blast lighting that gives the user the flexibility to do on the job field repairs. With the number of available and replaceable parts and accessories, this LED light will help reduce down time and get you back on the job. It is a must have tool for your abrasive blast lighting needs.

Features

• Light Output: 295 Lumens
• Brightness @ 48": 3110 Lux @ 8.5" Diameter
• Emitter Type: LED
• Color Temperature: +5500K
• Power Consumption: ~4 Watts
• Voltage Range: 12-30 VDC
• Light Body: Cast Aluminum
• Length: 4 3/8"
• Width: 2 5/8"
• Diameter: 2 5/8"
• Weight: 20 oz.
• Field Repairable Parts & Accessories (See Accessories)
• Battery Pack & Accessories (See Model 3510 LED)

3500LED10 WP OEM - 3500 Field Repairable LED Blast Light Assembly with 10' Cable and FLAT CONNECTOR - no power box by Western Technology

The 3500 LED - FIELD REPAIRABLE BLAST LIGHT is the best solution for abrasive blast lighting that gives the user the flexibility to do on the job field repairs. With the number of available and replaceable parts and accessories, this LED light will help reduce down time and get you back on the job. It is a must have tool for your abrasive blast lighting needs.

Features

• Light Output: 295 Lumens
• Brightness @ 48": 3110 Lux @ 8.5" Diameter
• Emitter Type: LED
• Color Temperature: +5500K
• Power Consumption: ~4 Watts
• Voltage Range: 12-30 VDC
• Light Body: Cast Aluminum
• Length: 4 3/8"
• Width: 2 5/8"
• Diameter: 2 5/8"
• Weight: 20 oz.
• Field Repairable Parts & Accessories (See Accessories)
• Battery Pack & Accessories (See Model 3510 LED)

3500LED250 OEM - 3500 Field Repairable LED Blast Light Assembly with 250' Cable (Spliced) - light only by Western Technology

The 3500 LED - FIELD REPAIRABLE BLAST LIGHT is the best solution for abrasive blast lighting that gives the user the flexibility to do on the job field repairs. With the number of available and replaceable parts and accessories, this LED light will help reduce down time and get you back on the job. It is a must have tool for your abrasive blast lighting needs.

Features

• Light Output: 295 Lumens
• Brightness @ 48": 3110 Lux @ 8.5" Diameter
• Emitter Type: LED
• Color Temperature: +5500K
• Power Consumption: ~4 Watts
• Voltage Range: 12-30 VDC
• Light Body: Cast Aluminum
• Length: 4 3/8"
• Width: 2 5/8"
• Diameter: 2 5/8"
• Weight: 20 oz.
• Field Repairable Parts & Accessories (See Accessories)
• Battery Pack & Accessories (See Model 3510 LED)

3500LED10 3500LED Field Repairable LED Blast Light Assembly with 10' Cable by Western Technology

The 3500 LED - FIELD REPAIRABLE BLAST LIGHT is the best solution for abrasive blast lighting that gives the user the flexibility to do on the job field repairs. With the number of available and replaceable parts and accessories, this LED light will help reduce down time and get you back on the job. It is a must have tool for your abrasive blast lighting needs.

Features

• Light Output: 295 Lumens
• Brightness @ 48": 3110 Lux @ 8.5" Diameter
• Emitter Type: LED
• Color Temperature: +5500K
• Power Consumption: ~4 Watts
• Voltage Range: 12-30 VDC
• Light Body: Cast Aluminum
• Length: 4 3/8"
• Width: 2 5/8"
• Diameter: 2 5/8"
• Weight: 20 oz.
• Field Repairable Parts & Accessories (See Accessories)
• Battery Pack & Accessories (See Model 3510 LED)

3500LEDS250 3500LED Field Repairable LED Blast Light Includes Power Box and 250' Cable with Flat Connector 10' from light for easy disconnect by Western Technology

The 3500 LED - FIELD REPAIRABLE BLAST LIGHT is the best solution for abrasive blast lighting that gives the user the flexibility to do on the job field repairs. With the number of available and replaceable parts and accessories, this LED light will help reduce down time and get you back on the job. It is a must have tool for your abrasive blast lighting needs.

Features

• Light Output: 295 Lumens
• Brightness @ 48": 3110 Lux @ 8.5" Diameter
• Emitter Type: LED
• Color Temperature: +5500K
• Power Consumption: ~4 Watts
• Voltage Range: 12-30 VDC
• Light Body: Cast Aluminum
• Length: 4 3/8"
• Width: 2 5/8"
• Diameter: 2 5/8"
• Weight: 20 oz.
• Field Repairable Parts & Accessories (See Accessories)
• Battery Pack & Accessories (See Model 3510 LED)

3500LEDBAT100 3500LED Field Repairable LED Blast Light with 100 cable and Battery Clamps by Western Technology

The 3500 LED - FIELD REPAIRABLE BLAST LIGHT is the best solution for abrasive blast lighting that gives the user the flexibility to do on the job field repairs. With the number of available and replaceable parts and accessories, this LED light will help reduce down time and get you back on the job. It is a must have tool for your abrasive blast lighting needs.

Features

• Light Output: 295 Lumens
• Brightness @ 48": 3110 Lux @ 8.5" Diameter
• Emitter Type: LED
• Color Temperature: +5500K
• Power Consumption: ~4 Watts
• Voltage Range: 12-30 VDC
• Light Body: Cast Aluminum
• Length: 4 3/8"
• Width: 2 5/8"
• Diameter: 2 5/8"
• Weight: 20 oz.
• Field Repairable Parts & Accessories (See Accessories)
• Battery Pack & Accessories (See Model 3510 LED)

3500LEDS60 3500LED System Includes Power Box and 60' cable (spliced) by Western Technology

The 3500 LED - FIELD REPAIRABLE BLAST LIGHT is the best solution for abrasive blast lighting that gives the user the flexibility to do on the job field repairs. With the number of available and replaceable parts and accessories, this LED light will help reduce down time and get you back on the job. It is a must have tool for your abrasive blast lighting needs.

Features

• Light Output: 295 Lumens
• Brightness @ 48": 3110 Lux @ 8.5" Diameter
• Emitter Type: LED
• Color Temperature: +5500K
• Power Consumption: ~4 Watts
• Voltage Range: 12-30 VDC
• Light Body: Cast Aluminum
• Length: 4 3/8"
• Width: 2 5/8"
• Diameter: 2 5/8"
• Weight: 20 oz.
• Field Repairable Parts & Accessories (See Accessories)
• Battery Pack & Accessories (See Model 3510 LED)